Tefla-PentLubricating Penetrant with Teflon

®

Lubricates metal surfaces as it cleans and removes rust and other corrosive deposits.

Tefla-Pent is a superior penetrant for freeing parts frozen by rust, gum, paint, corrosion, scale and carbon. Non-conductive up to 21,600 volts & contains Teflon® for long lasting lubrication.

Tefla-Pent contains actual microscopic particles of Teflon® that stick to metal surfaces providing long lasting results.

Tefla-Pent is so versatile it displaces moisture in electrical components and distributor caps, inhibits rust and corrosion, and prepares metal

parts for shipping and storage.

Penetrates quickly through rust and scale to loosen parts frozen by corrosion: nuts, bolts, joints, couplings, and pipe threads

Lubricates parts to ensure free and easy movement and leaves surfaces coated with a water resistant, non-drying film that inhibits future rust and corrosion

Protects parts by creating a non-drying film that seals out atmospheric corrosion

Displaces moisture and creates a waterproof film that helps dry out electrical equipment and prevents electrical discharge

T E C H N I C A L D A T A S H E E T

© 2010 Continental Research Corporation. [011410]H A S S L E F R E E B U S I N E S S S I N C E 1 9 6 7

SKU: 00691

P R O D U C T L A B E L

© 2010 Continental Research Corporation. [011410]H A S S L E F R E E B U S I N E S S S I N C E 1 9 6 7

LUBRICANT, PENETRANT, MOISTURE DISPLACEANT, SURFACE PRESERVER, RUST & CORROSION INHIBITOR.

Tefl a-Pent® lubricates metal surfaces as it cleans and removes rust and other corrosive deposits. Tefl a-Pent® is a superior penetrant for freeing parts frozen by rust, gum, paint, corrosion, scale and carbon. Excellent for use on nuts, joints, couplings, pipe threads and other frozen or corroded parts.

DIRECTIONS FOR USE: SHAKE WELLRead Cautions and Directions for Use carefully before using.For LUBRICATING: Spray on or in areas where lubrication is desired.For PENETRATING: Spray frozen part and tap to set up vibration necessary for penetration. Wait, then part will move freely.

DANGER: Flammable Aerosol. Contains gas under pressure; may explode if heated. Causes eye irritation. May be fatal if swallowed and enters airways.

Keep away from heat, sparks, open fl ames, and hot surfaces. –No smoking. Do not spray on an open fl ame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store in a well-ventilated place. Wash hands thoroughly after handling. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. If swallowed: Immediately call a poison center or doctor. Do NOT induce vomiting. Store locked up. Dispose of contents and container in accordance with local, state, and national regulations.

CONTAINS (CAS #): Isoparaffi nic Hydrocarbon (64742-47-8), Mineral Oil (8042-47-5), Carbon Dioxide (124-38-9), Propane/n-Butane (68476-86-8).

HMIS RATINGS: Health -1, Flammability -1, Reactivity -0, Personal -A.

KEEP OUT OF REACH OF CHILDREN.

DANGER: FLAMMABLE AEROSOL. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. KEEP OUT OF REACH OF CHILDREN. READ CAREFULLY OTHER CAUTIONS ON BACK PANEL.

NET WT. 15 OZ. (425 G)

• Lubricates metal surfaces as it cleans

• Frees parts frozen by rust, gum, paint, corrosion, scale & carbon

• Lubricating penetrant with micronic suspended Tefl on** Tefl on is a registered trademark

of DuPont Corp.

• Non-conductive up to 21,600 Volts and contains no chlorinated solvents

• Formula meets H2 lubricants category requirements

Lubricating Penetrant with Tefl on*

Lubricating Penetrant with Tefl on*

SOLD BY: