tel: +44 (0) 1726 879800 turbidity application and product data
TRANSCRIPT
![Page 1: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/1.jpg)
Tel: +44 (0) 1726 879800
www.partech.co.uk
Turbidity
Application and Product Data
![Page 2: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/2.jpg)
Typical Treatment Plant
Filtration
Final Water
Chlorination
Intake Protection
De-Nitrification
Inlet Screening
![Page 3: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/3.jpg)
Drinking Water Turbidity Monitoring
• Turbidity is an excellent early indicator of process problems– High Intake Turbidity will cause filter problems and
possible blockages– An increase in Turbidity in the Final Water can indicate
filter failure and is an indicator of possible Cryptosporidum in the water
• Dosing and Energy Savings can be made– Using Turbidity as a control parameter can reduce dosing
levels and hence save money when Turbidity is low, and will also react to changes in the inlet Turbidity automatically
– Filter Backwashing can be automated by using a Turbidity Monitor to monitor the effectiveness of the backwash process
![Page 4: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/4.jpg)
Measurement Options
• Operator Observation– Very operator dependent
• Handheld Turbidity Monitor– Small sample, dependent on operator skill– Traceable Calibration– Available when operator is on site, manual adjsutment
possible• Fixed installation Monitor
– 24/7 monitoring– Automated control possible
![Page 5: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/5.jpg)
Benefits of On-Line Monitoring
• Continuous On-Line Monitoring reduces the need for time-consuming laboratory analysis
• Removes operator dependancy from the measurement
• Real-time monitoring provides more accurate process control
• Improves plant efficiency by providing stability and continuity to the treatment process
![Page 6: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/6.jpg)
Partech’s Products
7300w² Monitor with TurbiTechw² LR Sensor
![Page 7: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/7.jpg)
The TurbiTechw² LR Sensor
Cleaning Module
Inlet Connection
Receive Module
Transmit Module
Drain Connection
Outlet(at rear of unit)
![Page 8: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/8.jpg)
Principle of Operation
• Compliant with ISO7027– 90 Light Scatter (Nephelometric)
• Back scatter minimised by flow cell design– Detection limit less than 0.1 NTU
• Ranges– Nominal 0-5 (can measure upto 30 NTU– Nominal 0-500 (can be ranged down to 0-50 NTU)
• Self Cleaning System– Wiper removes biofouling from optical surfaces– Ensure bubbles do not stay in flowcell
![Page 9: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/9.jpg)
Dry Calibration Standard
• Used to check performance of the system– an alternative to Formazin
• No Health and Safety issues• Repeatable• Can be made tracable by use of a
reference instrument• Cal standards are sensor specific• Can check zero and span values
![Page 10: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/10.jpg)
Materials and Specification
• Materials– Black Acetal Housing– Nitrile Wiper– PVC and Stainless Steel Fittings
• Temperature– Sensor: 0° to 50° C
• Pressure– 1 Bar
• Flowrate– 0-5 to 5 litres/minute
![Page 11: Tel: +44 (0) 1726 879800 Turbidity Application and Product Data](https://reader036.vdocument.in/reader036/viewer/2022081516/56649dd15503460f94ac752a/html5/thumbnails/11.jpg)
Possible Interferences
• Sensor Fouling– The TurbiTechw² LR Sensor has an integral automatic self-
cleaning system• Sample Colour
– Use of infrared light sources reduces the effect• Photo Detector Ageing
– Modern LED light sources do not suffer from ageing– Emit intensity is monitored and any drift is automatically
compensated• Air Bubbles
– Good installation practice reduces problems, high damping on the reading further reduces the problem
– A De-Bubbler is available if required