telescopic bollards - esi.info - better decisions for better
TRANSCRIPT
55
Rhino Telescopic Security Posts provide a simple, secure and cost effective method
of protecting premises and vehicles. Rhino posts can be located in forecourts, car
parks or shop fronts to provide superb perimeter protection. Fully retractable, the
bollards can be lifted out of the ground in seconds and lowered just as easily.
The bollards lock into their upright position with their integral high security push
button lock. When the posts are not required they discreetly slide into their host
tube below ground and the steel flap is closed flush.
Rhino Telescopic Bollards are manufactured in steel, stainless steel and polymer.
Steel bollards can be supplied in a galvanised or powder coated finish. All steel
products are hot dip galvanised to BS EN ISO 1461 (1999). Powder coating is
available in most RAL or British Standard colours. Our stainless steel range is
manufactured in high quality 316 (1.4401) grade austenitic steel. Polyurethane
products are made from Ferrocast®, a two part polymer set around a steel core.
They are also supplied in a range of colours.
Telescopic Bollards
www.marshalls.co.uk/streetfurniture
Sales Office: 0870 600 2425
The Rhino range has the following benefits:
Full Installation: Available on selected schemes.
Repair or Full Service: Option available for all products.
Overnight Service: Replacement of lost keys.
Master Key Facilities: Locks can be keyed alike or to differ.
Anti-tamper locking mechanism: Bollards feature a 10 pin ‘anti-drill’ push
button lock.
Security Caps: Additional locking cap available.
Anti-ram.
Range of Colours: RAL colours to match corporate colour schemes.
Matching Posts available.
All our telescopic bollards are precision manufactured by computer guided laser
for greater accuracy. In addition, products are quality checked at each stage of
manufacture to ensure they are always of the highest quality.
Rhino Static Bollard RB114, Birmingham
56
RS001 D4
RT RD4 SS Stainless Steel Domestic Telescopic Bollard
Telescopic BollardsDomestic
www.marshalls.co.uk/streetfurniture
Sales Office: 0870 600 2425 BLLD12 Bollards Q50 190
Coordinating items
RT RD4
76Ø
1002
500
700
6mm gauge base plate with drainage holes
100mm square section 4mm gauge mild steel
6mm gauge mild steel lid
76mm round section x 4mm gauge mild steel
25mm x 10mm square bar reinforcement
10 pin ‘anti drill’ push button lock
Steel lifting handle
RS D4
RT RD4 SS
n RT RD4: Telescopic round bollard is 500mm high with a diameter of 76mm.
n Designed for domestic installations, it is ideally used on driveways for restricting
parking or protecting vehicles.
n Manufactured from mild steel to BS 1449, galvanised to BSEN ISO 1461 (1999).
Polyester powder coated in either RAL Black 9005 or Yellow 1021 as standard.
n RT RD4 SS: Also available with a stainless steel post in grade 316 (1.4001)
n Coordinating static posts are available.
76Ø
1002
500
700
6mm gauge base plate with drainage holes
100mm square section 4mm gauge mild steel
6mm gauge mild steel lid
76mm round section x 3mm gauge mild steel
25mm x 10mm square bar reinforcement
10 pin ‘anti drill’ push button lock
Steel lifting handle
Trafic Management . . . . . . . . . . page 330
STOCKSTOCK
57
RT SQ5
RSP SQ8
RT SQ8 HD
RSP SQ8
902
1202
670
950
5mm gauge base plate with drainage holes
120mm square section 3mm gauge mild steelhigh grade S355
5mm gauge mild steel lid
90mm square section x 5mmgauge mild steel
25mm x 10mm �at bar frame
10 pin ‘anti drill’ push button lock
Steel lifting handle
5mm gauge base plate with drainage holes
120mm square section 3mm gauge mild steelhigh grade S355
5mm gauge mild steel lid
90mm squaresection x 5mmgauge mild steel
76.1mm x 2mm gauge internal post sleevereinforcement
25mm x 10mm �at bar frame
10 pin ‘anti drill’ push button lock
Steel lifting handle
902
1202
670
950
RT R8 HD
90Ø
1202
670
950
5mm gauge base plate with drainage holes
120mm square section 3mm gauge mild steelhigh grade S355
5mm gauge mild steel lid
90mm round section x 5mm gauge mild steel
76.1mm x 2mm gauge internal post sleevereinforcement
25mm x 10mm �at bar frame
10 pin ‘anti drill’ push button lock
Steel lifting handle
RT R5
90Ø
1202
670
950
5mm gauge base plate with drainage holes
120mm square section 3mm gauge mild steelhigh grade S355
5mm gauge mild steel lid
90mm round section x 5mm gauge mild steel
25mm x 10mm �at bar frame
10 pin ‘anti drill’ push button lock
Steel lifting handle
RS PR8
RS PR8
Matching static post
▼
Matching static post
▼
Matching static post
▼
Matching static post
▼
STOCK STOCK
58
n RT R5, is a telescopic round bollard with a diameter of 90mm.
The RT SQ5 telescopic square bollard is 90mm2. Both are 670mm high.
Posts are manufactured from 4mm gauge mild steel.
n Designed for commercial use these bollards are ideal for office car parks,
driveways, shop fronts, restricted access to roads, footpaths, commercial road
entrances and town centres.
n Manufactured from mild steel to BS 1440, galvanised to BSEN ISO 1461 (1999).
Supplied galvanised as standard bollards can be polyester powder coated to a
RAL colour of your choice.
n RT R8 HD and RT SQ8 HD feature the same specification but are reinforced with
an inner post sleeve 76.1mm high x 2mm thick for additional strength.
n Designed for areas that require a heavier duty product these bollards are ideal for:
restricted road or driveway access, car dealerships and in front of roller shutters.
n RT/R14 is a similar specification bollard to the RT R5 but is taller at 850mm and
has a larger diameter of 114mm.
n RT/R14D is reinforced with an inner sleeve 114mm x 5mm thick. Weighing 22kg
it is specified where to prevent anti-ram situations.
n RT R8, RT SQ8, RT SS5, RT R14 have passed the Sold Secure Security Test
Standard and are suitable for inclusion in the Sold Secure Approved Category List.
(Category: Automotive – Gold).
n Bollards feature a 10 pin ‘anti-drill’ push button lock.
n Co-ordinating static posts are available.
RT R14
RB 114
RT R14 HD
RB 114 AR
114Ø
114mm round section x 5mm gauge mild steel
140mm square section x 5mm gauge mild steel
5mm mild steel lid
25mm x 10mm �at bar frame
10 pin ‘anti drill’ push button lock
Steel lifting handle
5mm gauge base plate with drainage holes
1402
850
1110
114Ø
1402
850
1110
114mm round section x 5mm gauge mild steel
101 x 4mmgauge internalpost sleevereinforcement
140mm square section x 3mm gauge mild steel
5mm mild steel lid
25mm x 10mm �at bar frame
10 pin ‘anti drill’ push button lock
Steel lifting handle
5mm gauge base plate with drainage holes
RT SS 5
SSB01
101Ø
1202
710
1000
5mm gauge base plate with drainage holes
120mm square x 5mm gauge mild steel base post
5mm gauge mild steel lid
101mm diameter x 2mm wall 316 brushed stainless steel
25mm x 10mm �at bar frame
10 pin ‘anti drill’ push button lock
88.9 x 4mmgauge internalpost sleevereinforcement
Stainless steel locking cylinder and lifting handle
Matching static post
▼
Matching static post
▼
Matching static post
▼
RTL 80
80
970
780m
m
136mm
59
Fold Down Bollards
RT SU5 SUNDERLAND TELESCOPIC BOLLARD (FERROCAST)
135Ø
730
(1020mm below ground)
SUNDERLAND BOLLARD (FERROCAST)
FUSILIER BOLLARD
1000
RT KEY OP 1
60.3Ø
650
Lift Out and Lockable Bollards
STOCK
STOCK
ORNAMENTAL LOCKING TOP
170Ø
SQUARE SECURITY COVER
100
OptiOns Height Weight OperatingProduct Product Diameter HAG HBG Weight Weight Standard Anti Powder Hazard SeparateDescription Reference (mm) (mm) (mm) (kg) (kg) Finish Ram Coating Banding Locking Top
Telescopic Round 500mm RT RD4 76 500 700 22 6 PC Black 9005 or Yellow 1021 n
Static Round 500mm RS D4 76 500 300 7 n/a Galvanised n n
Telescopic Round 500mm Stainless Steel RT RD4 SS 76 500 700 22 6 Stainless Steel n
Static Round 500mm Stainless Steel RS001 D4 76 500 250 18 n/a Stainless Steel n
Telescopic Round 670mm RT R5 90 670 950 42 11 Galvanised n n Ornamental
Telescopic Round 670mm Heavy Duty RT R8 HD 90 670 700 44 14 Galvanised n n n Ornamental
Static Round 670mm RS PR8 90 670 580 16 n/a Galvanised n n Ornamental
Telescopic Square 670mm RT SQ5 90 x 90 670 950 42 13 Galvanised n n Square Security
Telescopic Square 670mm Heavy Duty RT SQ8 HD 90 x 90 670 950 44 15 Galvanised n n n Square Security
Static Square 670mm RSP SQ8 90 x 90 670 580 19 n/a Galvanised n n
Telescopic Round 710mm Stainless Steel RT SS5 101 710 1000 44 17 Stainless Steel n
Static Round 710mm Stainless Steel SSB 01 HD 101 710 540 43 n/a Stainless Steel n n
Telescopic Round 850mm RT R14 114 850 1110 54 17 Galvanised n n
Telescopic Round 850mm Heavy Duty RT R14 HD 114 850 1110 54 25 Galvanised n n n
Static Round 850mm RB 114 114 850 650 18 n/a Steel n
Telescopic Round 730mm Ferrocast RT SU 5 135 730 1020 30 16 Black 900S n AS
Static Round 730mm Ferrocast RCB 74 89 730 300 42 n/a Polymer n n
Fold Down 650mm RT KEY OP 1 60 650 n/a 7 n/a Yellow 1021 n n
Fusilier Ferrocast 1000 n/a n/a Polymer
Lift Out 970mm RTL 80 970 970 n/a 21 n/a Galvanised n n
60
n RSP Vic 8 is a galvanised steel static post with an ornamental top and decorative
surface trim plate around the bottom. The bollard is 710mm high and has a
diameter of 90mm.
n Decorative security covers serve two purposes: Firstly they provide an ornamental
finish to a telescopic bollard, and secondly they create a further security measure
covering the lock on the bollard and featuring a second lock.
n The Ornamental Locking Top is suitable for use on the round RT R5 and RT R8 HD
Bollards. It provides a traditional finish to a telescopic bollard.
n The Square Security Cover can be used on the RT SQ5 and the RT SQ8 HD.
n The Ornamental Locking Top and Square Security Cover is available in black with
gold detailing as standard, other RAL colours are available to special order.
RSP VIC8
90Ø
710
(550mm below ground)
AS = As Standard