himotions.it telescopic sliding gates€¦ · telescopic gates allow an access point to be opened...
TRANSCRIPT
HI -MOTIONS Sr l
Via del l ’ Indus tr ia, 91
36030 Sarcedo ( VI ) ITALY
T +39 0445 367536
F +39 0445 367520
w w w.himotions.i t
himot ions . i t
Several solutions exis t for closing an industr ial or residential access pointIn most s i tuat ions, the bes t c los ing solut ions are s l id ing doors, because they are ver y f lex ible and provide greater poss ibi l i t ies for managing the passage of heav y vehic les.
Why you should choose a telescopic s l iding gateDif ferent t ypes of s l id ing gates are avai lable to of fer a range of solut ions for each applicat ion. In par t icular, i f manoeuvr ing space is l imited, the ideal solut ion for c los ing large access point s is the telescopic s l id ing gate. This solut ion makes i t poss ible to minimise as much as poss ible the space occupied by the gate in the manoeuvr ing space.
HI -MOTIONS has designed a new range of accessor ies for the cons truc t ion of te lescopic s l id ing gates with t wo or more panels that s l ide on the same number of t racks on the ground. They also make k i t s containing the accessor ies necessar y for assembling a te lescopic sys tem.
Why choose HI-MOTIONS systems· The opt ion of ins tal l ing the gate
with t wo f ix ing modes: lower or lateral.
· Help with the ins tal lat ion process through a v ideo tutor ial that quick ly and eas i ly explains the main phases of the process.
Less space, more speedTelescopic gates al low an access point to be opened at t wice as fas t as a t radit ional s l id ing gate.
Telescopic s l id ing gates
TELESCOPICSLIDING
GATES
HI -MOTIONS Sr l
Via del l ’ Indus tr ia, 91
36030 Sarcedo ( VI ) ITALY
T +39 0445 367536
F +39 0445 367520
w w w.himotions.i t
himot ions . i t
Several solutions exis t for closing an industr ial or residential access pointIn most s i tuat ions, the bes t c los ing solut ions are s l id ing doors, because they are ver y f lex ible and provide greater poss ibi l i t ies for managing the passage of heav y vehic les.
Why you should choose a telescopic s l iding gateDif ferent t ypes of s l id ing gates are avai lable to of fer a range of solut ions for each applicat ion. In par t icular, i f manoeuvr ing space is l imited, the ideal solut ion for c los ing large access point s is the telescopic s l id ing gate. This solut ion makes i t poss ible to minimise as much as poss ible the space occupied by the gate in the manoeuvr ing space.
HI -MOTIONS has designed a new range of accessor ies for the cons truc t ion of te lescopic s l id ing gates with t wo or more panels that s l ide on the same number of t racks on the ground. They also make k i t s containing the accessor ies necessar y for assembling a te lescopic sys tem.
Why choose HI-MOTIONS systems· The opt ion of ins tal l ing the gate
with t wo f ix ing modes: lower or lateral.
· Help with the ins tal lat ion process through a v ideo tutor ial that quick ly and eas i ly explains the main phases of the process.
Less space, more speedTelescopic gates al low an access point to be opened at t wice as fas t as a t radit ional s l id ing gate.
Telescopic s l id ing gates
TELESCOPICSLIDING
GATES
A S
LALA = [(A+B)/2] + S
S60
T T60
T T60
B
min. 30
himot ions . i t h imot ions . i t
7
11
5 2
121 4
3
8
6
9
10
1 2 3 4 5 6
7 8 9 10 11 12
+2x
Door 1: Max imum weight ( kg )
Door 2: Max imum weight ( kg )
Tota l Max imumWeight ( kg )
Door 1:Speed (m/min)
Door 2:Speed (m/min) Cable Ø (mm)
40 0 40 0 80 0
9 18
4
450 450 90 0 5 [s t a in les s s tee l ]
60 0 60 0 120 0 5
350 350 70 0
12 24
4
40 0 40 0 80 0 5 [s t a in les s s tee l ]
50 0 50 0 10 0 0 5
250 250 50 0
15 30
4
30 0 30 0 60 0 5 [s t a in les s s tee l ]
450 450 90 0 5
20 0 20 0 40 0
18 36
4
250 250 50 0 5 [s t a in les s s tee l ]
40 0 40 0 80 0 5
150 150 30 0
21 42
4
20 0 20 0 40 0 5 [s t a in les s s tee l ]
30 0 30 0 60 0 5
Cable selec tion table:
The bes t cable and the sys tem operat ion l imit s are ident i f ied depending on the dimens ioning of the door panels and their manoeuvr ing speed.
In this case, the pul ley box is pos i t ioned under the door. The cable running underneath the lower par t a l lows e l iminat ing the aes thet ic impac t, a lso thanks to the s ide guards (281.11). This t ype of assembly a l lows ins ta l l ing more than t wo doors . I t i s necessar y to cons ider the minimum wheel d iameter (min. 120 mm) and the T door prof i le d imens ions (min. 60 mm, max. 120 mm).
A (m)B (mm) S (mm) T (mm)
Notes[recommended] [minimum] [recommended]
up to 4 m 50 40 0 60 -120 use one guide bracket (283.30X-283.40X )
more than 4 m 150 80 0 60 -120 use two guide bracket s (283.30X-283.40X )
Bot tom mounting:In this case, the pul ley box is ins ta l led on the s ide of the door, which al lows e l iminat ing the cons t ra int s of wheel d iameter and T door prof i le d imens ions. This conf igurat ion does not a l low ins tal l ing more than t wo doors .
HI -MOTIONS reminds c l ient s that for cor rec t ins ta l lat ion,
in compl iance wi th appl icable s tandards, i t i s necessar y to comply wi th minimum safet y d is tances as wel l as to ver i f y the operat ive force wi th in the sys tem.
A (m)B (mm) S (mm) T (mm)
[recommended] [minimum] [recommended]
up to 4 m 50 40 0 any
more than 4 m 150 80 0 any
Side mounting:
Technical drawing and minimum measurements:
DOOR 2 DOOR 1
Watch the assembly ins t ruc t ion v ideo.
Telescopic s l id ing gates Te lescopic s l id ing gates
Available in var ious t ypes of k it .
Components of the telescopic sys tem:
Galvanized cable covers for bot tom/side mounting
Galvanized f ixed pulley box for cable
Galvanized adjustable pulley box for cable
Galvanized cable ground f ix ing bracket
Galvanized connec tion bracket between the two leaves
Galvanized L-bracket for t rack 283
Galvanized track cap
Galvanized guide bracket with 4 rollers CableGalvanized track
Adjustable guide plate to be screwed
Galvanized wheel with internal suppor t
281.11281.21 282.401
282.501282.411282.511
282.521282.541
282.531282.551
283.011
283.013283.014
283.30X283.40X 284.401
284.501284.503
283.3X X283.4X X
283.200283.201
109.120T111.120T
A S
LALA = [(A+B)/2] + S
S60
T T60
T T60
B
min. 30
himot ions . i t h imot ions . i t
7
11
5 2
121 4
3
8
6
9
10
1 2 3 4 5 6
7 8 9 10 11 12
+2x
Door 1: Max imum weight ( kg )
Door 2: Max imum weight ( kg )
Tota l Max imumWeight ( kg )
Door 1:Speed (m/min)
Door 2:Speed (m/min) Cable Ø (mm)
40 0 40 0 80 0
9 18
4
450 450 90 0 5 [s t a in les s s tee l ]
60 0 60 0 120 0 5
350 350 70 0
12 24
4
40 0 40 0 80 0 5 [s t a in les s s tee l ]
50 0 50 0 10 0 0 5
250 250 50 0
15 30
4
30 0 30 0 60 0 5 [s t a in les s s tee l ]
450 450 90 0 5
20 0 20 0 40 0
18 36
4
250 250 50 0 5 [s t a in les s s tee l ]
40 0 40 0 80 0 5
150 150 30 0
21 42
4
20 0 20 0 40 0 5 [s t a in les s s tee l ]
30 0 30 0 60 0 5
Cable selec tion table:
The bes t cable and the sys tem operat ion l imit s are ident i f ied depending on the dimens ioning of the door panels and their manoeuvr ing speed.
In this case, the pul ley box is pos i t ioned under the door. The cable running underneath the lower par t a l lows e l iminat ing the aes thet ic impac t, a lso thanks to the s ide guards (281.11). This t ype of assembly a l lows ins ta l l ing more than t wo doors . I t i s necessar y to cons ider the minimum wheel d iameter (min. 120 mm) and the T door prof i le d imens ions (min. 60 mm, max. 120 mm).
A (m)B (mm) S (mm) T (mm)
Notes[recommended] [minimum] [recommended]
up to 4 m 50 40 0 60 -120 use one guide bracket (283.30X-283.40X )
more than 4 m 150 80 0 60 -120 use two guide bracket s (283.30X-283.40X )
Bot tom mounting:In this case, the pul ley box is ins ta l led on the s ide of the door, which al lows e l iminat ing the cons t ra int s of wheel d iameter and T door prof i le d imens ions. This conf igurat ion does not a l low ins tal l ing more than t wo doors .
HI -MOTIONS reminds c l ient s that for cor rec t ins ta l lat ion,
in compl iance wi th appl icable s tandards, i t i s necessar y to comply wi th minimum safet y d is tances as wel l as to ver i f y the operat ive force wi th in the sys tem.
A (m)B (mm) S (mm) T (mm)
[recommended] [minimum] [recommended]
up to 4 m 50 40 0 any
more than 4 m 150 80 0 any
Side mounting:
Technical drawing and minimum measurements:
DOOR 2 DOOR 1
Watch the assembly ins t ruc t ion v ideo.
Telescopic s l id ing gates Te lescopic s l id ing gates
Available in var ious t ypes of k it .
Components of the telescopic sys tem:
Galvanized cable covers for bot tom/side mounting
Galvanized f ixed pulley box for cable
Galvanized adjustable pulley box for cable
Galvanized cable ground f ix ing bracket
Galvanized connec tion bracket between the two leaves
Galvanized L-bracket for t rack 283
Galvanized track cap
Galvanized guide bracket with 4 rollers CableGalvanized track
Adjustable guide plate to be screwed
Galvanized wheel with internal suppor t
281.11281.21 282.401
282.501282.411282.511
282.521282.541
282.531282.551
283.011
283.013283.014
283.30X283.40X 284.401
284.501284.503
283.3X X283.4X X
283.200283.201
109.120T111.120T
HI -MOTIONS Sr l
Via del l ’ Indus tr ia, 91
36030 Sarcedo ( VI ) ITALY
T +39 0445 367536
F +39 0445 367520
w w w.himotions.i t