template 1 template 3 template 2 - benartex.com · benartex, llc • 132 west 36th street, 4th...
TRANSCRIPT
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
Templates
Template 1
Template 2
Template 3
100% Templates
1” squarefor scale
SAMPLE KEY/SKU QTY CUT CUT PIECES VIA WOF
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
A
C
E
G
I
B
D
F
H
All Systems Glow Panel7948GL-55 Navy
Space Voyage7949GL-55 Navy
Rocket Launch7954GL-55 Navy
Weave6068-38 Orange
Cosmic Geo7950GL-55 Navy
Cosmic Geo7950GL-44 Lime
Weave6068-87 Red
Weave6068-30 Yellow
Galaxy Dots7951GL-51 Cobalt
Fussy cut (1) 32-1/2” x 40” panel.
(2) 9-1/2” x 44-1/2” LOFstrips.
(1) 3-1/2” x WOF strip. Sub-cut (5) 3-1/2”squares.
(40) Template 2 triangles.
(1) 3-1/2” x WOF strip.Sub-cut (5) 3-1/2”squares.
(2) 3” x 40” WOF strips.(2) 3” x 37-1/2” WOF
strips.
(3) 2-1/2” x WOF strips.*(6) 2-1/2” x WOF strips,
BINDING.
(4) 2” x WOF strips.Sub-cut (80) 2”squares.
(4) 3-1/2” x WOF strips. Sub-cut (40) 3-1/2”squares.
(2) 2-3/4” x WOF strips. Sub-cut (8) 2-3/4” x9-1/2” strips.
(40) Template 1 triangles.(40) Template 3 triangles.
* SEW STRIPS VIA SHORT ENDS THEN GO TO BORDER ASSEMBLY WOF/LOF=WIDTH/LENGTH OF FABRIC
1/2 yd
3/4 yd
1/3 yd
1-1/8yds
1 panel
1-1/3yds
1/4 yd
3/8 yd
1/4 yd
BORDER ASSEMBLY MEASURE WIDTH AND LENGTH OF THE QUILT TOP TO ENSURE C AND J BORDER SIZES, BELOW ARE OUR CUTTING SIZES.
FINISHED SIZE: 54” x 66”
FINISHING Cut batting and backing 3” larger than top on all sides. Layer backing, batting and top together and baste or pin. When quilting is completed, trim excess batting and backing. Bind as usual.
B
A
Trim blockto measure
36 ½” x 44 ½”AFTER addingFabric B border
BCenter Block
B B
Unit 1make 40
HT-1 T-3
T-2
HG
Unit 2make 40
Unit1F F
Block Onemake 5
H H
H H
E
Unit2
Unit2
Uni
t2
Unit2
Block Assembly1. Sew (1) B 3” x 40”strip to each side of the A32-1/2” x 40” panel. Sew(1) B 3” x 37-1/2” strip tothe top and to the bottom of the A panel. Trim the block to measure 36-1/2” x 44-1/2” to make the Center Block.
2. Place (1) H-Template 1triangle on top of (1)G-Template 2 triangle, rightsides together, aligning the leftsides. Sew the (2) trianglestogether along the left side.Press the smaller triangleopen.
3. Place (1) H-Template 3 triangle on top of theG-Template 3 triangle, right sides together, aligningthe right sides. Sew the (2) triangles together alongthe right side. Press the smaller triangle open tomake (1) Unit 1 square. Trim the unit to measure3-1/2” square.
4. Repeat Steps 2-3 to make (40) Unit 1 squarestotal.
5. Place (1) F 2” square on the bottom left corner of(1) Unit 1 square, right sides together. Sew acrossthe diagonal of the smaller square from the upperleft corner to the lower right corner. Flip open thetriangle formed and press. Trim away the excessfabric from behind the triangle ¼” away from thesewn seam.
6. Follow the diagram below for the seam directionto add a F 2” square to the lower right corner of theUnit 1 square to make (1) Unit 2 square.
7. Repeat Steps 5-6 to make (40) Unit 2 squarestotal.
8. Sew (1) H 3-1/2” square to eachside of (1) Unit 2 square to makethe top row. Repeat to make thebottom row. Sew (1) Unit 2 squareto each side of (1) E 3-1/2” squareto make the middle row. Sew the (3)rows together lengthwise to make(1) Block One square. Repeat tomake (5) Block One squares total.
Block Twomake 5
H H
H HUnit2
Unit2
Uni
t2
Unit2I
H1 2 1 2 1H H
D
D
C CCenter Block
H
H2 1 2 1 2H H H
Quilt Diagram
Note: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.
9. Sew (1) H 3-1/2” square to eachside of (1) Unit 2 square to makethe top row. Repeat to make thebottom row. Sew (1) Unit 2 squareto each side of (1) I 3-1/2” squareto make the middle row. Sew the (3)rows together lengthwise to make(1) Block Two square. Repeat tomake (5) Block Two squares total.
BORDER ASSEMBLY MEASURE WIDTH AND LENGTH OF THE QUILT TOP TO ENSURE C AND D BORDER SIZES, BELOW ARE OUR CUTTING SIZES.10. Sew (1) C 9-1/2” x (44-1/2”) strip to each sideof the Center Block.
11. Sew (1) D 2-1/2” x (54-1/2”) strips to the topand bottom of Center Block.
12. Sew (3) Block One squares, (4) H 2-3/4” x9-1/2” strips and (2) Block Two squares together.Sew the newly sewn strip to the top of the CenterBlock.
13. Sew (3) Block Two squares, (4) 2-3/4” x 91/2”strips and (2) Block One squares together. Sew thenewly sewn strip to the bottom of the Center Blockto make the quilt top.