tems panic handles · 2014-04-03 · tems panic handles for tempered glass, full frame and wood...
TRANSCRIPT
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
PL100A PL101A PL102A
PRL GLASS SYSTEMSPANIC HANDLES
FOR TEMPERED GLASS, FULL FRAME AND WOOD DOORS
PRL GLASS SYSTEMS
2
PANIC HANDLECONFIGURATIONS
PRL Glass systems inc.251 Mason way
City of industry, CA. 91746Phone: 800-433-7044
Fax: 626-968-9256www.prlglass.com
Leading the Industry in Proven Custom Archi-tectural Glass and Metal Door Hardware.
PRL is now offering 2 NEW completely revo-lutionary, adaptable glass door panic systems.
PL 100 PL 110. Glass Door Panic System
Both Series of Panic Door Systems accentuate glass entrance doors with its contemporary, minimal 1-1/4” tubular housing to accom-modate over 100 precision and manufactured fitting components engineered and mechani-cally synchronized for a safe panic function.Many door style configurations that include narrow full frame entrances and custom ap-plications are available, choose from a wide range of contemporary exterior pulls and adaptable handles, custom TVS header, an electric strike can also be utilized with this glass panic door system and work in conjunc-tion with a remote key less application, please consult PRL for details.
PANIC HANDLESFOR TEMPERED GLASS, FULL FRAME AND WOOD DOORS
The PL 100 panic door device can also be dogged by sliding a pin located below the cylinder hous-ing which allows the panic system to remain in an open position giv-ing free access during business hours. An electric strike can also be utilized with this glass panic door system and work in conjunction with a remote key less application.
Note: PRL manufactures two types of glass door panic systems; PL 100 for top latch and PL 110 for floor latch-ing panic device applications. State and Local building codes may require top latch for A.D.A. compliance.
•Thresholds are recommended on floor strike system as floor mounted strikes can be a tripping hazard.
PL110 is a contemporary panic door handle design primarily for glass door entrance systems - panics can be manufactured to be installed on wood and aluminum doors as well, please consult factory for specifica-tions. The slim 1 1/4” diameter interior panic bar system conceals the latching mechanism allowing minimal unin-terrupted view on 1/2” or 3/4” glass.
The PL 110 panic door device can also be dogged by sliding a pin located below the cylinder housing which al-lows the panic system to remain in an open position giving free access during business hours. An electric strike can also be utilized with this glass panic door system and work in conjunction with a remote key less application.
Note: State and Local building codes may require top latch for A.D.A. com-pliance. Please see PRL Glass Door Panic System PL 100 Series for all your top latching panic device applications.
•Thresholds are recommended on floor strike system as floor mount-ed strikes can be a tripping hazard.
3
PRL GLASS SYSTEMSPANIC HANDLECONFIGURATIONS
PRL Glass systems inc.251 Mason way
City of industry, CA. 91746Phone: 800-433-7044
Fax: 626-968-9256www.prlglass.com
PANIC HANDLESFOR TEMPERED GLASS, FULL FRAME AND WOOD DOORS
Handle A Handle B Handle C Handle D Handle E Handle F Handle G Handle H
Handle J Handle J-S Handle K Handle K-S Handle L Handle L-S Handle M Handle M-S
PRL GLASS SYSTEMS
4
CONFIGURATIONS
PRL Glass systems inc.251 Mason way
City of industry, CA. 91746Phone: 800-433-7044
Fax: 626-968-9256www.prlglass.com
ARCHITECTURAL HANDLE
Handle N Handle P Handle X Handle Y
Keyed access device
Push indicator“A” style exterior pull
PLDBL100A
PLDB100A
5
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
USPL100A PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.
PLDB100A DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100A see illustration
PLDH100A DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.
PLEZ100A ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.
4-1/8
Keyed access device
Push indicator“A” style exterior pull
PRL GLASS SYSTEMS
6
Architectural Hardware
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
US
Exception Maximum height for 1/2” glass doors is 108” tall when using “F” style exterior handle
Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:
•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware
•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation
The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use
SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )
Stainless steel tubing with 0.083” wall thickness ( 2 mm )
1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )
Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated
Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*
*Consult factory for fabrication
Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted
Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”
PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing
Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”
Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL
1.3 million tested by Architectural testing
PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths
Electric strike
Manual strike
Cylinder housing
PL100Apanichandle
PLDH100Adummyhandle
PL100Apanichandle
Blind fastener
PLDB100AdeadbolthandleWith keyedcylinders
10-1/2”
Retainer plate
PLEZ100Aelectronicegresshandle
36” to 42” refer to
Local code
Keyed access device
Push indicator“A” style exterior pull
7
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
US
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
US
Keyed access device
Push indicator“D” style exterior pull
PLDBL100D
PLDB100D
PRL GLASS SYSTEMS
8
Architectural Hardware
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
USPL100D PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.
PLDB100D DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systems.
PLDH100D DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.
PLEZ100D ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.
4-1/8
Keyed access device
Push indicator“D” style exterior pull
9
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
US
Exception Maximum height for 1/2” glass doors is 108” tall when using “F” style exterior handle
Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:
•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware
•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation
The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use
SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )
Stainless steel tubing with 0.083” wall thickness ( 2 mm )
1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )
Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated
Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*
*Consult factory for fabrication
Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted
Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”
PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing
Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”
Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL
1.3 million tested by Architectural testing
PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths
Electric strike
Manual strike
Cylinder housing
PL100Dpanichandle
PLDH100Ddummyhandle
PL100Dpanichandle
PLDB100DdeadbolthandleWith keyedcylinders
10-1/2”
Retainer plate
PLEZ100Delectronicegresshandle
36” to 42” refer to
Local code
Keyed access device
Push indicator“D” style exterior pull
PRL GLASS SYSTEMS
10
Architectural Hardware
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
US
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
US
Keyed access device
Push indicator
PLDBL100F
PLDB100F
“F” style exterior pull
11
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
USPL100F PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.
PLDB100F DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100F see illustration
PLDH100F DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.
PLEZ100F ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.
4-1/8
Push indicator
“F” style exterior pull
PRL GLASS SYSTEMS
12
Architectural Hardware
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
US
Exception Maximum height for 1/2” glass doors is 108” tall when using “F” style exterior handle
Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:
•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware
•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation
The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use
SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )
Stainless steel tubing with 0.083” wall thickness ( 2 mm )
1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )
Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated
Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*
*Consult factory for fabrication
Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted
Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”
PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing
Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”
Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL
1.3 million tested by Architectural testing
PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths
Electric strike
Manual strike
Cylinder housing
PL100Fpanichandle
PLDH100Fdummyhandle
PL100Fpanichandle
Blind fastener
PLDB100FdeadbolthandleWith keyedcylinders
10-1/2”
PLEZ100Felectronicegresshandle
36” to 42” refer to
Local code
Keyed access device
Push indicator
“F” style exterior pull
13
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
US
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
US
Keyed access device
Push indicator
“J” style exterior pull
PLDBL100J
PLDB100J
PRL GLASS SYSTEMS
14
Architectural Hardware
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
USPL100J PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.
PLDB100J DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100J see illustration
PLDH100A DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.
PLEZ100J ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.
4-1/8
Push indicator
“J” style exterior pull
SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )
Stainless steel tubing with 0.083” wall thickness ( 2 mm )
1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )
Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated
Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*
*Consult factory for fabrication
Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted
Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”
PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing
Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”
Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL
1.3 million tested by Architectural testing
PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths
15
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
US
Exception Maximum height for 1/2’ glass doors is 108” tall when using “F” style exterior handle
Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:
•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware
•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation
The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use
Electric strike
Manual strike
Cylinder housing
PL100Jpanichandle
PLDH100Jdummyhandle
PL100Jpanichandle
Standoff
PLDB100JdeadbolthandleWith keyedcylinders
10-1/2”
Retainer plate
PLEZ100Jelectronicegresshandle
36” to 42” refer to
Local code
10-1/2”
36” to 42” refer to
Local code
Push indicator
“J” style exterior pull
PRL GLASS SYSTEMS
16
Architectural Hardware
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
US
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
US
Keyed access device
Push indicator
“JS” style exterior pull
PLDBL100JS
PLDB100JS
17
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
USPL100JS PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.
PLDB100JS DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100J see illustration
PLDH100JS DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.
PLEZ100JS ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.
4-1/8
Push indicator
“JS” style exterior pull
SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )
Stainless steel tubing with 0.083” wall thickness ( 2 mm )
1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )
Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated
Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*
*Consult factory for fabrication
Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted
Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”
PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing
Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”
Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL
1.3 million tested by Architectural testing
PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths
PRL GLASS SYSTEMS
18
Architectural Hardware
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
US
Exception Maximum height for 1/2’ glass doors is 108” tall when using “F” style exterior handle
Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:
•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware
•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation
The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use
Electric strike
Manual strike
Cylinder housing
PL100JSpanichandle
PLDH100JSdummyhandle
PL100JSpanichandle
Standoff
PLDB100JSdeadbolthandleWith keyedcylinders
Retainer plate
PLEZ100JSelectronicegresshandle
10-1/2”
36” to 42” refer to
Local code
10-1/2”
36” to 42” refer to
Local code
Push indicator
“JS” style exterior pull
19
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
Architectural Hardware
US
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
US
PRL GLASS SYSTEMS
20
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL100A
21
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL100B
8
PRL GLASS SYSTEMS
22
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL100C
23
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL100D
PRL GLASS SYSTEMS
24
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
10 1/2
8
PL100E
25
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100F
36-42
10 1/2
10
PRL GLASS SYSTEMS
26
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL100FADA The PL100FADA panic handle is designed to meet ADA compliance. The exterior handle measures 10” from bottom of door to bottom of exterior handle.
27
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100F10 The PL100F10 is a heavy duty panic handle designed for over sized doors up to 120” tall by using 3/4” tempered glass and a full height “F” exterior handle UL Approved and tested by Architectural testing
36-42
10 1/2
PRL GLASS SYSTEMS
28
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL100G
8
29
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100H
36-42
10 1/2
8
PRL GLASS SYSTEMS
30
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100J
36-42
10 1/2
31
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100JS
36-42
10 1/2
PRL GLASS SYSTEMS
32
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100M
36-42
10 1/2
8
33
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100MS
36-42
10 1/2
8
PRL GLASS SYSTEMS
34
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100X
36-42
10 1/2
8
35
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100Z
36-42
10 1/2
PRL GLASS SYSTEMS
36
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100A
37
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100B
PRL GLASS SYSTEMS
38
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100C
39
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100D
PRL GLASS SYSTEMS
40
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100E
41
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100F
PRL GLASS SYSTEMS
42
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100FADA
43
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100F10 The PL100F10 is a heavy duty panic handle designed for over sized doors up to 120” tall by using 3/4” tempered glass and a full height “F” exterior handle UL Approved and tested by Architectural testing
PRL GLASS SYSTEMS
44
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100G
45
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100H
PRL GLASS SYSTEMS
46
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100J
47
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100JS
PRL GLASS SYSTEMS
48
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100M
49
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100MS
PRL GLASS SYSTEMS
50
PL100 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100X
51
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL100 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL100Z
PRL GLASS SYSTEMS
52
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Panic HandlesFor Tempered Glass Doors
53
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL110A
PRL GLASS SYSTEMS
54
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
10 1/2
PL110B
55
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL110C
PRL GLASS SYSTEMS
56
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
10 1/2
PL110D
57
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
PL110E
PRL GLASS SYSTEMS
58
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL110F
59
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
10 1/2
PL110G
PRL GLASS SYSTEMS
60
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
10 1/2
PL110H
61
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
10 1/2
PL110J
PRL GLASS SYSTEMS
62
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
10 1/2
PL110JS
63
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL110K
PRL GLASS SYSTEMS
64
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL110KS
65
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
PL110L
PRL GLASS SYSTEMS
66
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
PL110LS
67
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
10 1/2
PL110M
PRL GLASS SYSTEMS
68
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
10 1/2
PL110MS
69
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
PL110N
PRL GLASS SYSTEMS
70
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
PL110P
71
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
18 1/2
10 1/2
PL110X
PRL GLASS SYSTEMS
72
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
8
PL110Y
73
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
36-42
10 1/2
PL110Z
PRL GLASS SYSTEMS
74
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110A
75
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110B
PRL GLASS SYSTEMS
76
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110C
77
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110D
PRL GLASS SYSTEMS
78
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110E
79
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110F
PRL GLASS SYSTEMS
80
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110G
81
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110H
PRL GLASS SYSTEMS
82
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110J
83
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110JS
PRL GLASS SYSTEMS
84
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110K
85
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110KS
PRL GLASS SYSTEMS
86
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110L
87
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110LS
PRL GLASS SYSTEMS
88
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110M
89
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110MS
PRL GLASS SYSTEMS
90
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110N
91
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110P
PRL GLASS SYSTEMS
92
PL110 PANIC HANDLECONFIGURATIONS
Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110X
93
PRL GLASS SYSTEMS
PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles
PL110 PANIC HANDLECONFIGURATIONS
Finish
#4 brushed stainless steel
#8 polished stainless steel
Satin brass
Polished brass
us10b
Custom painted
The following list of mortise cylinders will work with PRL Panics and Deadbolts
Schlage RusswinCorbinSargent
YaleBest
Lori
20-001#0 1/2”5253411E641152218
MFR. NO. NOMINAL LENGTH
CAM NO.
1-1/8”
1-1/8”1-1/8”
1-1/8”
1-1/8”1-1/8”1-1/8”
B502-191#1#1X130001EC41161 (std.)4400-00-3002
Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”
PL110Y