tender costs of proposed works for bank of · pdf filetender costs of proposed works for bank...

1

TENDER COSTS OF PROPOSED WORKS FOR

BANK OF BARODA, AT

KHARSIA BRANCH

PREPARED BY :-

MURLIDHAR GIDWANI

Architectural and Engineering consultant,

36 Garh Complex, Near Geeta Lodge, Telephone Exchange Road, Bilaspur (C.G.)

Punjwani Galli, Near Sunita Lodge, Naharpara, Raipur (C.G.)

Contact : Mobile : 98271-24040, 94252-19998

office 07752-402938

Surya

2

SUMMARY OF TENDER COST OF PROPOSED WORKS

FOR

BANK OF BARODA, AT KHARSIA BRANCH

SUMMARY

1 COST OF INTERIOR WORKS

Rs.

2 COST OF ELECTRICAL WORKS

Rs.

3 COST OF AIRCONDITIONING WORKS

Rs.

4 COST OF MODULAR FURNITURE &

CHAIRS

Rs.

Total Rs.

Say Rs.

(Rs. In Words - Only)

3

TENDER OF COST OF PROPOSED INTERIOR WORKS FOR


1. CIVIL WORK :-

S.No. Particulars Quantities Unit Rates Amount

Sq.m./Cu.m ISI Rs. Rs.

C-1

Total Rs. NIL

(Rs. In Words - NIL)

2. PAINTING WORK :-

S.No

.

Particulars Quantities Unit Rates Amount


P-1

Total Rs. NIL

(Rs. In Words - NIL)

4

3. P.O.P. & GYPSUM WORK :-

S.No

.



G-1 Providing and fixing in position gypsum

board false ceiling as per manufacturer's

specifications and instructions with 12.5 mm

thk. "Gypboard" screw-fixed to the underside

of G.I. grid consisting of ceiling sections at

maximum center to center distance of 18",

perimeter channels and intermediate

channels at maximum center to center

distance of 4'-0". G.I. grid shall be fixed to

the RCC slab above with the help of 25 mm

x 0.5 mm strap hanger at maximum center to

center distance of 4'-0" both ways and soffit

cleats. Soffit cleats shall be fixed to the RCC

ceiling with W.E. type 12 mm Dai., 17/16"

long steel raw plug. The underside of the

boards shall be taped and filed to give a

smooth, seamless ceiling. The item shall be

completed as per manufacturer's

specifications and instructions including

necessary sleeves for ducts, finishing of

joints, cutouts, supports for AC grills, light

fixtures, speakers, grooves, etc. all complete

as per design and Architect's instructions.

Including Three coats of Plastic paint with

primer & Putty.

1100.00 Sqft

Total Rs.

5

4. CARPENTRY WORK :-

S.No

.



CW-1 Providing and fixing at site 9'0"/10'0" high

semi glazed/ blind, half height partition

made of 8mm Commercial ply on both side

of partition, with 1mm Laminate finish, up to 2'6" height and above 7'0", 5mm thick float

glass( modi or Eqi.) from 2'6" level to 7'0"

level fixed in wooden frame made with

2"x1.5" IInd Grade teak wood battens fixed

at Apr. 2'0" center to center both ways, as per

details. Glass shall be fixed with 3/4"x1.25"

section teak wood flat or moulded beading with 8mm grove. At the door opening wood

Battens of 2 3/4"x2" with 3/4"x1.5" patam

and 8mm grove opposite to patam, shall be

used. All exposed teak wood section will be

Painted after preparing the surfaces smooth

using base, putty, sand papers as required.

Door openings are excluded from area

measurements.

500.00 Sqft

CW-2

Providing and fixing at Wicket doors, for. 3'x4' Size openings, Made of 100x40mm Teak wood frame with 8mm Modi, Triveni Float Glass Paneling holded by teak wood ribs, Acid Etching will be done on glass, As per Designs, provided by architect casting up to 45/- per sqft. All exposed wood sections will be Polished in shade Mathcing to the laminate Shade . brass hinges, Designer's 6" long SS handles, and godrej locking arrange ments. Complete.

7 Each

CW-3 Providing and fixing at site Hinged doors,

40mm thickness, flush door type partially

glazed By 5mm Modi or Triveni Float Glass,

fixed by 1/2"x3/4" flat beading, above 2'6"

height. With 1mm Laminate finish with out

joints on both faces of door. Exposed faces

will be covered by 3/4"x1.5" wooden

battens. All exposed wood sections will be

painted. brass hinges, Designer's 10" long SS

handles, and godrage locking arrange ments.

Complete.

Sqft

6

CW-

4

Making And Providing Wall Mounted Slip

holder and writing top with cheque drop box

at below of 1'6"x4'0"x3'6" size. Made by

18mm Ply with 1mm silver foil Laminate

Finish, top will be 8mm glass to view the

kind of slips with division for all kind of

slips.

1.0 Each

CW-5 Making and fixing of File Cabinet, of 18"

depth and , By 6mm,8mm,12mm,18mm

commercial Plys for file storage, With

1mm Laminate finish in desire shade and

combinations. Exposed Edges of Ply will be

covered by 1/2"x3/4" ribs. All exposed teak

wood section/ Inner face of Ply will be

Painted after preparing the surfaces smooth

using base, putty, sand papers as required.

With all Accessories Like handle, Locks etc.

Complete. As per design (front will be

measured.)

225.00 Sqft

CW-

6

Providing and fixing at site Swing Glass

Door made of 12mm thick float glass( modi

or Eqi.) with 1' wide acid ethching pattern at

middle, holded in powder coated Extruded

Aluminium standard sections rails fixed on

floor machine and at top. With 12" long SS

Designer handles.

CW-

7

Providing and fixing at site fixed 12mm

glass in powder coated extruded aluminium

section. With 1' wide acid ethching pattern at middle of glass

Sqft

CW-

8

Providing and fixing at site Top

Mounted/Floor mounted Door closures with

installation complete with cutting of floor.

A) Top Mounted Door closures (HardWyn or

Equ.)

1.0 Each

b) Floor mounted Door closures (Dorma or

saint gobin) no other floor machine will be

accepted

1.0 Each

CW-9 Making and fixing of Visitor's sofa's of 21"

seat width with out arms using upholstery

cloth of require shade not Exceeding cost

250/- per meter. Cushioned by 32 density u

foam and rubber foam on structure made by 18mm Commercial ply and 1.5"x1.5" II nd

grade wood section. All ply and wood

section shall be treated with anti termite

chemical.

10.00 SEAT

CW-

10 Providing and fixing granite casing on door opening 12'0'' wide with nosing on both

boges by using adhasive cement and all

complete attached

Rft

Total Rs.

7

5. MISCELLANEOUS WORK :-

S.No

.



M-1 Providing and installing in position verticle

blinds, made of 4" wide. Stripes and powder

coated channel on top, all complete as per

design.

60.0 Sqft

M-2 Floor mats at main entrance and toilet

entrance Synthetic grass type .

37.0 Sqft

M-3 Providing and fixing in position 12mm soft

board with upholster .

16.0 Sqft

M-4 Banks mono Display with digital Print on

perforated one way flex

40.0 Sqft

M-5 server room table making and fixing working

counter 2'6'' wide complete 18 mm 16mm,

12mm 8mm ply wood & teak wood and

1mm laminated fiber comple computer trey

and drawer

6.0 Rft

Total Rs.

8

SUMMARY OF ESTIMATE FOR INTERIOR WORK

SUMMARY

1 CIVIL WORK

Rs. NIL

2 PAINTING WORK

Rs. NIL

3 P.O.P. & GYPSUM WORK

Rs.

4 CARPENTRY WORK

Rs.

5 MISCELLANEOUS WORK Rs.

Total Rs.

9

TENDER OF COST OF PROPOSED ELECTRICAL WORKS FOR


A. POINT WRING WORK :-



Supply,Installation, Testing and

commissioning of (Providing and fixing of

all standard accessories) of light point, fan

point, exhaust fan point, bell point, group

control points, two way control points etc.

using 1.5 Sqmm PVC Pipes with all

accessories like heavy duty junction boxes,

cPVC bends, PVC pull boxes 100MM * 100

MM * 50MM or 150MM * 200MM * 50MM

deep, with covers etc.

The work scope is for surface/concealed

conduit system and therefore installation of

conduits on wall and slab with metallic/PVC

modular boxes, staples/saddles etc.&

cheiseling of wall & plastering by 1:6

Cement mortor is included in scope of

contractor.

All conduit accessories will be of threaded

type & tools & consumable like hacksaw

blades, threading dyes to be arranged by

contractor. The switch / socket (contractor

supplied) shall be of make as specified in list

of approved make with metallic/PVC

modular boxes, staples/saddles etc. is

included in scope of contractor.

The earth wire PVC insulated 1.5 sq. mm

copper 660 V/1.1 KV Grade is to be installed

in Pipe along with wires as per the drawing

& specifications. The conduit shall be fixed

on wall/slab at maximum 450mm distance by

GI saddles.

10

The work scope is including supply of all

material like conduit, wire, switchboard,

boxes, ceiling rose, angle holder, batten

holder. Complete work has to be executed as

per drawing, specification to ensure good

aesthetics, line & level. All materials like

wire, conduit, switches, switchboard shall be

supplied by contractor as per approved make.

Above specification governs all work

specified in items.

A.1 Supply, Installation, Testing and

commissioning of light points in group

control system including 2*1.5 sq. mm

copper flexible 660 V/1.1 KV grade

insulated wire, switch, switch board, conduit

and material.

A.1.1 1 Lights controlled by 6A switch. 14 Nos.

A.1.2 2 Lights controlled by 6A switch. 24 Nos.

A.1.3 6A socket with Switch on same board 10 Nos.

A.1.4 Step regulator with switch 6 Nos.

A.1.5 Sign board 16A Switch 2 Nos.

Total Rs.

11

B. CIRCUIT WIRING/MAINS WIRING WORK :-



Supply,Installation, Testing and

commissioning of Circuit/Mains

wiring from DB to switch board or

power socket outlet using 1.5 Sqmm

PVC pipe with all accessories like

heavy duty junction boxes, Pipe

bends, PVC pull boxes 100MM x100

MM x50MM to 300MM x 450MM

x50MM deep, with MS covers etc.

All conduit accessories will be of

threaded type & tools & consumable

like hacksaw blades, threading dyes to

be arranged by contractor. The switch

/ socket (contractor supplied) shall be

of make as specified in schedule and

list of approved make with metallic

modular boxes shall be installed for

concealed flush type arrangement

shall be fixed on wall/slab at

maximum 450mm distance by GI

saddles.

The work scope is including supply of

all material like conduit, wire, pull

boxes. Complete work has to be

executed as per drawing,

specifications to ensure good

aesthetics, line & level.

12

B.1 Supply, Installation, Testing and

commissioning of following size

flexible copper wire 660 V/1.1 KV

grade of approved make PVC

insulated including PVC Pipes,pull

boxes, hardware complete in all

respect.

B.1.1 2*2.5 sqmm(P&N)+1*1.5 sqmm (E) (

FOR lighting and ups circuits)

300.00 Mtr

B.1.2 2*4 sqmm(P&N)+1*2.5 sqmm (E) (

FOR AC circuits)

120.00 Mtr


commissioning of 16A switch and

16A - 5 pin socket outlet on separate

board (including supply of all material

like MS box, switch, socket and

hardware etc).

3 Nos.

B.3 3 no. 6A switch and 3 no. 6A 5 pin

socket on separate board.(At Router

Rack)

1 Nos.

B.4 3 no. 6A switch and 3 no. 6A 5 pin

socket on modular furniture (for comp

pp)

15 Nos.


commissioning of 20A industrial

socket, 20A pin top and 20A SP MCB

with box and the box shall be

concealed in wall. The box also shall

be of respective make of MCB.

8 Nos.

Total Rs.

13

C. LIGHTING FIXTURES AND FANS :-



C.1 Supply , Installation, testing commissioning

of lighting fixtures. All fixtures should be complete with all accessories such as lamps,

starters , low loss copper chokes, PF

improvement capacitors etc.

The fixtures should be complete with ball &

socket type vibration dampers & all

accessories with necessary down rods (if

necessary). The fixtures should be complete

with ball & socket type vibration dampers and

all accessories with necessary down rods (if

necessary). As per following details.The model

No. given in BOQ is for one particular make

.The fixture shall be installed of given make or equivalent type from list of approved make as

per instructions of Architects /EIC . Above

specification governs all work specified in

items

C.1.1 Down light fitting suitable for following lamps

complete with all accessories and lamps.

2X36W FP-L 1 Nos

MAKE - HAVELLS- LHCC22236111

C.1.2 Square Down light fitting suitable for following

lamps complete with DL tray, & lamps all

accessories and lamps.

2X26W PL-C 20 Nos

MAKE - HAVELLS - LHOC73226399

C.1.3 surface mounted light fitting suitable for

following lamps complete with all accessories

and lamps.

4x18/20 W FTL 2 Nos

MAKE - HAVELLS-LHCFN1402411

C.1.4 Ceiling fan 1200mm sweep complete with all

accessories .

2 Nos

C.1.5 Wall fan 450mm sweep complete with all

accessories .

10 Nos

C.1.6 36 watt Strip tube light fittings with electronic

choke and complete accessories

6 Nos

C.1.7 1X18 watt down lighter 12 Nos

Total Rs.

14

D. CABLING WORK :-



D.1 Supply and laying of cables in excavated

trenches, concrete trenches, along walls,

through hume pipes, cable trays etc with

testing & commissioning.

The cable shall be 1.1 KV grade,

aluminium or copper armoured of approved

make as per following sizes

The scope includes supply & fixing of

aluminium cable tags( at every 6

Mts distance),clamps/saddles for dressing

of cable/cable route markers at every 7 Mtr.

distance as per drawings,

specifications & instruction of consultants

D.1.1 3.5c x50 sqmm AYFY

30.00 Mtr

D.1.2 3.5c x70 sqmm AYFY 50.00 Mtr

D.1.3 2c x10 sqmm AYFY (for DG) 30.00 Mtr

D.1.4 3.5c x6 sqmm AYFY (for UPS) 15.00 Mtr

D.2 Cable termination of armoured cables 1.1

KV grade including supply & installation

of cable glands, cable lugs (copper

double compression type), heat shrinkable

sleeves on long ends, crimping paste etc.

The work includes testing &

commissioning of cables, meggaring values

& submitting reports of tests. (One set includes termination of all cores of one end

only)

D.2.1 3.5c x70 sqmm AYFY 6 SET

D.2.2 4c x10 sqmm AYFY 4 SET



Total Rs.

15

E. LT PANELS AND DB:-



E.1 Supply,Installation, testing & commissioning

of following panels including supply and

installation of all

switchgears(SFU,HRCFUSES,CONTACTO

R,OVERLOAD RELAY,

MCCB,CHNGEOVER

SWITCH,MCB,CAPACITOR) and supply

and installation of all metering(Ammeter,

Voltm

, push buttons (Luminous/Non Luminous

type) , connectors, aux contact blocks,

control fuses , instrument CTs , protection

CTs ,APFCR relay , all protection relays ,

annunciation window etc entire fabrication

of panels, complete bus bar system, wiring, s

E.1.1 METER PANEL + MDB 1 No

1 -DG change over Switch 40AMP DP

1- Amp Meter, 1 -Volt Meter, Bus Bar

RYB, DG ON INDICATORS

1- 63 Amp BUSBAR

1- 63 Amp TPN MCB (INCOMER)

1- 32 Amp TPN MCB( FOR ACDB)

1- 32 Amp DP MCB ( FOR LDB)

1- 40 Amp DP MCB ( UPS DB)

1- 32 Amp TP MCB ( SPARE)

E.2 ACDB ( WITH ENCLOSURE COMPLETE) 1 Nos

Incomer :

32A TPN MCB - 1Nos

Outgoing :

16A DP MCB 3 Nos

16

16A DP MCB 1 Nos(SPARE)

20A TP MCB 2 Nos

E.3 UPS DB( WITH ENCLOSURE COMPLETE) 1

Incomer :

25A DP MCB - 1Nos

Outgoing :

10A SP MCB - 4Nos

E.4 LIGHT DB( WITH ENCLOSURE COMPLETE) 1

Incomer :

32A DP MCB - 1Nos

Outgoing :

16A SP MCB -2Nos

6A SP MCB - 5Nos E.5 32 A TPN MCB with enclosure for DOOR

switching

1 No

E.6 40 A DP MCB with enclosure for UPS

switching

1 No

Total Rs.

17

F. TELEPHONE WRING WORK :-



F.1 Supply & Installation of 1.5 Sqmm PVC

Pipes of approved make with accessories like

heavy duty pull boxes with covers, GI

saddles, bends, socket etc. in

concealed/surface manner in wall, ceiling,

floor etc.

The work includes chiseling of wall i.e. ziri

with mechanical cutter, saddling of conduits

at maximum 400 mm distance etc.

F.1.1 DIA 19mm conduit 20.00

Mtr

F.2 Supply,Installation, Testing &

commissioning of 0.5 mm size copper tinned

conductor unarmoured PVC cable of

following sizes

F.2.1 3 pair unrmoured cable 120.00 Mtr

F.3 Supply, Installation, Testing &

commissioning of Telephone outlet box RJ-

11 with top plate

2 Nos.

Total Rs.

18

G. LT EARTHING WORK :-



G.1 Preparation of the Earth station : (as per I.S.

3043)

a) Excavation of rocky earth, soft murrum, hard

murrum etc. and backing filing with black

cotton soil for the earth station, the earth pil

size is 1000mm X 1000mm X 2500mm deep.

b) S/F of Copper plate of size 600 X 300 X 3.00

mm

c) Supply & fixing 25mm X 5mm, 3 mtrs.

Copper strip from copper plate to earth

terminal including brazing/welding at plate

etc.

d) Supplying and laying position 15mm, 2mtrs.

G.I.B. class pipe for watering. S/F of one set

of reducer/funnel with mesh.

e) S/F of One set of reducer/funnel with mesh.

f) S/F of the following in the earth station.

i) 75 Kg. Charcol

i) 50 Kg. Original Salt

g) Construction of earth pit chamber and

necessary brick work, concrete, plastering,

S/F of C.I. Cover of size 12" X 12" complete

as per site requirement.

02 Set

G.2 Supplying and laying position 25 X 3mm

copper strip direct on wall / in ground with

screws and washer including soldering

/welding etc.

10.00 Mtrs.

G.3 Supply and laying of 6 SWG hot dip G.I.

Wire from earth terminal at earth station to

earth bus-bar/ pole etc. on wall / 0.3 mtr.

Below ground level, wherever required as

per sit condition.

12.00 Mtrs.

G.4 Supply and laying of 4 sqmm PVC insulated

copper wire in 15mm G.I. Pipe including

accessories complete as required. (For

Computers)

20.00 Mtrs.

Total Rs.

19

H. COMPUTER CABLING WORK :-



H.1 Supply & Installation of 20mm dia 1.5mm

thick PVC Conduit Pipe with accessories

like heavy duty pull boxes with covers,

GI saddles, bends, socket etc. in

concealed/surface manner in wall,

ceiling, etc.

H.1.1 DIA 20mm Conduit Pipe 10.00 Mtr

H.2 Supply & Installation of Cabling/ups/raw

power lines for computers Complete with

tees right angle bends fixing accessories in

Concealed manner in wall/Flooring. With

Palstering in 1:6 on walls.

H.2.1 25mm* 6 pvc conduits lines in floor trunking

lines

50.00 Mtr

H.3 Providing and fixing g.I. Junction boxes in

wwll/ floor in concealed manner with ss plate

cover with hales for cable out, guarded by

cable manager of 400*400 size max with

provision of accommodating 8 - 25mm dia

lines in each direction.

6 Each

H.4 Supply , installation, testing and

commissioning of enhanced CAT E5

LAN cable in previously laid conduits as

per item no. j.1 .

130.00 Mtr

H.5 Supply , installation,testing and commissioning of RJ 45 connector type computer socket outlet with RJ 45 connector of approved make.

15 Nos

H.6 Supply , installation,testing of Patch card of 1m Length

15 Each

Total Rs.

20

I. MUSIC SYSTEM WORK :-



I.1 Supply & Installation of 1.5 Sqmm PVC

Pipes of approved make with

accessories like heavy duty pull boxes

with covers, GI saddles, bends, socket

etc. in concealed/surface manner in wall,

ceiling, floor etc.

The work includes chiseling of wall i.e.

ziri with mechanical cutter, saddling of

Pipes at maximum 400 mm distance etc.

40.00 Mtr.

I.2 Supply & laying of 2 core speaker wire in

previously laid material PVC Pipes.

60.00 Mtr.

I.3 Supply, installation, testing &

commissioning of 6 W - 8 ohms 6" dia

ceiling mounted music supeakers with

line matching transtomer for 100/70 V

output line. (Philips LDB 8353 +

8377/equivatent, with bottom grill.

4 Nos

MAKE AHUJA CS 562T

I.4 Supply, installation, testing &

commissioning of 5.1 channnel hi-fi

CD/DVD music playing system With ,

2500 W amplifier, including mouning

rack,

1 Nos

Total Rs.

21

SUMMARY OF ESTIMATE FOR ELECTRICAL WORK



A

POINT WIRING

Rs.

B

CIRCUIT WIRING/MAINS WIRING

Rs.

C

LIGHTING FIXTURES AND FANS

Rs.

D

CABLING WORKS

Rs.

E

LT PANELS AND DB

Rs.

F

TELEPHONE WIRING

Rs.

G EARTHING

Rs.

H

COMPUTER CABLING

Rs.

I

MUSIC SYSTEM

Rs.

Total Rs.

22

TENDER OF COST OF PROPOSED AIR CONDITIONING

WORKS FOR BANK OF BARODA, AT KHARSIA BRANCH



1.0 SUPPLY OF EQUIPMENTS

1.2 CEILING MOUNTED SPLIT UNITS BLUE STAR MAKE consisting of :

Supply of air-cooled split air-conditioning

units as specified

a) Air-cooled condensing unit consisting of :

1.2.2 App.2 TR. Wall mounted split unit 3 STAR RATING 2.0 Each

1.2.2 App.1.5 TR. Wall mounted split unit 3 STAR RATING 2.0 Each

1.3 INSTALLATION

Installation,testing and commissioning of split air conditioning units as specified complete with

a) Mounting brackets/platform for condensing unit

b) Brackets and supports for evaporator units

1.3.2 App. 2 TR. Ceiling unit 2.0 Each

1.3.2 App. 1.5 TR. Wall mounted unit 2.0 Each

1.4 ADDITIONAL PIPING & CABLING

Extra for piping & cabling for distance between the condensing unit and evaporator complete

a) Hot gas line insulation

b) Liquid line with insulation

c) Power/Control cabling

1.4.1 For wall mounted units 35.0 Meter

2.1 Providing and installation of extra Concealed Rigid PVC/HDPE drain pipe with fittings,Including cheiseling of wall, Plastering of wall with 1:4 Cement Mortor for AC drains 40.0 Rmt

Total Rs.

tender costs of proposed works for bank of · pdf filetender costs of proposed works for bank...

Documents