tender document - bharat petroleum · tender document tender reference no ... the iem should be...
TRANSCRIPT
Domain : bpcleproc.in
Parent department: BPCL
Department : CPO (M) -ProcurementGroup 3
Department officer : Sonia Srinivas
System ID : 29141 Tender Reference No. : CRFQ1000288539
Tender Title : GLOBALTENDER FORAnnual RateContract forsupply of CS Plugvalve(Manual)/CSPressure BalancePlug valves (BothManual &MOV)conformingto API 6D tovarious BPCLLocations all overIndia.
Tender Date : 08/11/2017
Tender Description : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plugvalve(Manual)/CS Pressure Balance Plug valves (Both Manual & MOV)conforming to API 6D to various BPCL Locations all over India.I. Annual RateContract will be placed on the successful bidder and will be valid for a periodof One Year from the date of placement of the contract.ii. No supplies are to be made against the Contract . Supplies are to be madeonly against Call-Offs or Purchase Orders(PO) which shall be placed by thevarious departments within BPCL. iii. BPCL may place the call-off or purchaseorders till the last validity date of the ARC.iv. The Call-Offs or Purchase Orders would be placed for any quantity asrequired by the respectivedepartments & the vendor will have to supply thesame.v. The materials are required at various BPCL locations all over India & thevendors have to deliver thematerials based on the call-offs/POs. .vi. The quantities against each item are only indicative / approximate & there isno assurance that BPCL will uplift any or all the items / quantities for which thecontract is placed. BPCL reserves the right to place call-offs for differentquantities of the items subject to being within the overall value of thecontract.vii. The validity of the contract may be extended by a further period ofupto SIX months on a mutual agreement basis. .viii. A repeat contract may also be placed on mutual agreement basis afterexpiry of the original contract. Any repeat contract will be at the same termsand conditions and rates as the original contract and valid upto a further periodof upto 12 months. .ix. In case the value of the contract gets exhausted within the one year validityperiod, BPCL reserves the right to place a repeat order for a value of upto theoriginal contract value. .2. Award of contract would on overall lowest landed cost basis.3. Purchase preference to MSEs (Micro & Small Enterprises) shall beapplicable as per tender condition. .4. DELIVERY PERIOD: Please quote your best delivery period on door-delivery basis, in the Unprice Bidattached with the tender document.5. Unloading & stacking at the delivery address will be arranged by consignee.However, advance information regarding expected date of delivery to Site In-charge must be given well in time for making unloading arrangements underadvice to originator of ORDER. .6. Bid validity 180 Days from the final due date of opening of tender. .IN CASE OF ANY CLARIFICATION PERTAINING TO E-PROCUREMENT PROCESS/tender, THE TENDERER MAY CONTACTTHE FOLLOWING PERSONNEL OF M/S BPCLPROCUREMENT LEADER :
Tender Document
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 1 of 46
MR.MANIMARAND DASARAJLANDLINE NO. : 022 24176408 / MOBILE NO. 8220002889 / E-MAIL :[email protected] PROCUREMENT MANAGER : MRS. SRINIVAS SONIALANDLINE NO. : 022 24176418 / MOBILE NO. 9820067543 / E-MAIL :[email protected] IEM should be contacted on their mobile / email, only if there are anycomplaints related to the tender. For Seeking clarifications / details related totender, the concerned BPCL official whose name and contact number is givenin the tender documents should be contacted. .To facilitate evaluation & comparison, BPCL shall convert all Bid prices offoreign Bidder expressed in the amounts in various currencies ( only Euro/USDis permitted) in which Bid price is payable, to Indian Rupees from referencerate archive rates as available in Reserve Bank of India, website on the date ofPrice Bid opening. In case, exchange rate is not available alternative sourcesviz. Economics Times etc. shall be considered for all the currencies.
Envelope Bidding Type : In 2 Part bidding Envelope Bidding Option : Document fees andEMD + Technicalbid + Price bid
Bid validity period (in days) : 180 Type of contract : Goods
Project duration / delivery orcompletion period (in days)
: 120 Form of Contract : Supply
Bid submission configuration
Bidding access : Open/Press
Base currency : INR Bidding type : Global
Bidding currencies : INR,EURO,USD
Key configuration
Bidding variant : Buy Mode of pre-bid meeting : Offline
Pre Bid Meeting Venue :
CENTRAL
PROCUREMENT
ORGANIZATION(MKTG),
BPCL, A INSTALLATION,
SEWREE FORT RD,
SEWREE(E), MUMBAI
400 015, INDIA PHONE
022 24176408/24176418
Dates configuration
Document downloading startdate
: 08/11/201710:00:00
Document downloading enddate
: 30/11/201715:00:00
Bid submission start date : 08/11/201710:01:00
Bid submission end date : 30/11/201715:00:00
Pre-bid meeting start date : 15/11/2017 Pre-bid meeting end date : 15/11/2017
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 2 of 46
11:00:00 13:00:00
Bid opening date : 30/11/201715:01:00
Document / EMD / Security fee detail
Tender fees : Not Applicable EMD amount : INR : 500000.00USD : 7660.00
EMD payable at : BHARATPETROLEUMCORPORATIONLIMITED,MUMBAI
Emd Clause :
Earnest Money Deposit
(EMD) ( also referred to as
Bid Security): You shall be
required to submit the
Earnest Money Deposit
(EMD) of Rs. 500000/-(
Five lakh) for Indian bidders
& USD 7660/- (for foreign
bidders) , if applicable in
physical form by the way of
demand draft drawn on any
Nationalised or scheduled
bank in favour of M/s
Bharat Petroleum
Corporation Ltd. and
payable at Mumbai or by
way of Bank Guarantee (
format attached) executed
by any scheduled bank
approved by Reserve Bank
of India, valid for 6 months
from due date of opening of
tender, at our office in a
sealed cover addressed to
Procurement Leader Gr 3,
with following boldly super-
scribed on the outer cover
CRFQ number, Item,
Closing date,Time,Name of
the tenderer. It should be
dropped in the tender box or
sent by Registered
Post/Courier to the
following address so as to
reach before the due date &
time of the tender.
PROCUREMENT
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 3 of 46
LEADER GR 3, CENTRAL
PROCUREMENT
ORGANIZATION(MKTG),
BPCL, A INSTALLATION,
SEWREE FORT RD,
SEWREE(E), MUMBAI
400 015, INDIA PHONE
022 24176408/24176418
Kindly ensure that the bank
confirmation for BG from
the authorized signatory of
the bank in their letter head
is submitted to us along
with BG
EMD Payment Method : Demand Draft
Documents
Sr.No. File name File description
Filesize (in
MB)Date and time Status
1 INSTRUCTIONS TOBIDDERS 29141.pdf
ITB 0.772 07/11/201718:32:13
Approved
2 GPC (with PMAArbitration clause &
Holiday Listing Link)on12.10.15 - 29141.pdf
gpc 0.394 07/11/201718:07:59
Approved
3 Electric Actuator SizingSheet 29141.pdf
actuator sizing sheet 0.022 07/11/201718:04:06
Approved
4 DECLARATION29141.pdf
declaration 0.083 07/11/201717:47:34
Approved
5 integrity pact01.09.17-29141.pdf
IP 2.525 07/11/201717:47:05
Approved
6 PV specs.pdf pv specifications 0.042 07/11/201717:18:23
Approved
7 CS PRESSUREBALANCE PLUGVALVES WITH
MOTOR.pdf
cspbpv specifications 0.179 07/11/201717:17:48
Approved
8 FORMAT FOR BANKGUARANTEE FOR
EMD.doc
BG format EMD 0.042 07/11/201717:16:30
Approved
9 PPLC.pdf local content policy 0.610 07/11/201717:15:25
Approved
10 Min qty format verified QTY CHART 0.449 07/11/2017 Approved
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 4 of 46
by TPIA.pdf 17:15:25
Bidding forms
Documentfees andEMD
EMD Form
Details Bidder's Response
EMD Amount offering
EMD payment method
Instrument No.
Payment Date
EMD Form
Technicalbid
BQC form FOR BIDDER
BQC form FOR BIDDER
BPCL REQUIREMENT BIDDERSRESPONSE
1.Established manufacturer/ Valid licensesThe bidder should be an established manufacturer of pressure balanced Plug valvesconfirming to API 6D and the valves to bear API monogram.Foreign bidder may bid either directly or through their Indian representative. In case Indianagent is quoting on behalf of the foreign manufacturer, all documents are to be submittedpertaining to the foreign manufacturer only along with relevant authorizations from foreignmanufacturer. However, the order shall be placed on the foreign manufacturer directly (ifsuccessful). No consortium bidding is allowed.Document Required:Bidder to submit relevant valid (as on bid due date) API 6D certificate.
2.Minimum quantity supplied in the pastThe bidder should have supplied at least 372 nos. of CS PBPVs of 50 mm diameter orhigher diameter during any continuous 12 months period in the last 5 years prior to the biddue date.Documents required:Bidder to submit copy of excise invoices/bill of lading along with purchase order/s of therespective sizes for supplies made during any continuous 12 months’ period in the last 5years prior to the bid due date.Above Data/documents required in point 2 should be duly verified by any one of thefollowing third party inspection agency viz. SGS /GLISPL / IRS / DNV / LRIS / EIL/TATA Projects / PDIL / ULIPL / RITES LTD / ITSIPL/BV/ ICS/Mecon/ TUV. Allcharges of the third party for attestations and verification shall be borne by the Vendors.
3.After sales supportThe vendor should have maintenance & service support in India. Details of the agency /company in India who will be extending this support should be provided.Documents required:a)Letter giving details of the maintenance and service support base in India on vendor’s
BQC form FOR BIDDER
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 5 of 46
letter head.b)In case the service support is by an agency appointed by the vendor, thensubmit the following:•Agreement copy between the vendor & their service agency.• Declaration by the vendoris to be given that in case at any point of time, the agency appointed by the vendor fails toprovide the service support, then vendor would be responsible to provide such a support.
4.Financial capacity(a)The vendor should have achieved a minimum average Annual financial turnover of Rs.3.50 Crs or USD 0.536 Million (For Foreign vendors) as per Audited financial statements(Balance Sheet and Profit & Loss account), during the last three consecutive accountingyears prior to the bid due date.(b)The vendor’s net worth should be positive as per last available Audited financialstatements including Balance Sheet and Profit & Loss account.Documents required:Available Audited Balance Sheets & Profit & Loss account of the vendor for the last threeconsecutive accounting years (English language only) prior to the bid due date.Letter from practicing CA on net worth based on latest audited balance sheet.
Technicalbid
Annexures for Acceptance
Acceptance Of Annexures
SrNo Document Name File
Name
I / We have read, understood and accepted the followingAnnexure of the Tender Document. (To read the Document pleaseclick the corresponding Download link)
1 Instruction toBidders(ITB)
ITB.pdf
2 General PurchaseConditions
gpc.pdf
Annexures for Acceptance
Technicalbid
Annexures for acceptance and upload after duly filled, signed & Stamped.
Annexures for acceptance
SrNo Document Name File Name
I / We have read, understood and accepted thefollowing Annexure of the Tender Document. (Toread the Document please click the correspondingDownload link)
1 Declaration Declaration.pdf
2 Integrity Pact (IP) IP.pdf
3 Electric ActuatorSizing Sheet
Electric ActuatorSizing Sheet .pdf
Annexures for acceptance and upload after duly filled, signed &
Stamped.
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 6 of 46
4 Template forUpdation of GSTRegistration details
GST Registration
Technicalbid
Particulars of Bidder for tender
Particulars of Bidder
. .
1. Name of the Tenderer
2.(a) Office Address/ PAN no.
2.(b) Factory Address
2.(c) Tel No - Office
2.(d) Tel No - Factory
2.(e) Fax No - Office
2.(f) Fax No - Factory
3. Email ID (The email ID should be valid for the full tender period and the information shared/ adviseissued/ other mails sent to this ID shall be treated as official communication from either sides)
4.Name/ designation of personnel handling the email IDs
PL MENTION COUNTRY OF ORIGIN & LOAD PORT Please confirm the Item Number / Descriptionand Part Number / BTN Classification / Custom Tariff Number (FOR FOREIGN BIDDERS)
Year of Establishment/Registration & Date ( Certificate of Registration issued by Registrar of firms/Companies to be uploaded
Bankers Information
. . .
1 Name of Bankers & Full Address
2 Year of Commencement of manufacturing
Particulars of Bidder for tender
Technicalbid
A.DETAILS OF RELATIONSHIP WITH BPC DIRECTORS
DETAILS OF RELATIONSHIP WITH BPC DIRECTORS
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 7 of 46
PART- A (Applicable where Manufacturer is Sole Proprietor)
Description Bidder response
1.Name of Tenderer
2.a.Office Address
2.b.Residence Address
3.Telephone
4. State whether manufacturer is related to any of the director(s) of BPC
5.If Yes to 4, state the name of the Director and manufacturer
Put NA whichever is not applicable
PART- B (Applicable where the manufacturer is a partnership firm)
Description BiddersResponse
1. Name of the Partnership firm
2.Address :
3.Name of Partners
4.State whether any of the partner is a Director to BPC
5. If Yes to 4 ,state the names(s) of Directors.
6.State whether any of the partner is related to any of the Director(s)of BPC
7.If Yes to 6 state the name(s) of Director(s) and the concerned Partners relationshipwith him/her.
Put NA whichever is not applicable
PART - C (Applicable where the Manufacturer is a Public or Private Ltd. Co.)
Descrition BiddersResponse
1. Name of the Company
2.a.Address of Regd. Office
2.b.Address of Principal Office
3.State whether the company is a Pvt. Ltd. Co. or Public Ltd Co.
4. Names of Directors of the Company
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 8 of 46
5.State whether any of the Director of your Company is a Director of BPC .
6.If Yes to (5) state the name(s) name(s) of the Director
7.State whether any of the Director of your Company is related to any of the Directors ofBPC.
.If Yes to (7) state the name(s) of Director and the concerned Director's (of the Vendor)relationship with him/her.
Put NA whichever is not applicable
For the current list of BPC directors, please check on our website www.bharatpetroleum.in
Technicalbid
Technical Specifications for CS PRESSURE BALANCED PLUG VALVES
Technical Specifications for CS PRESSURE BALANCED PLUG VALVES
SR.NO. DESCRIPTION TECHNICAL SPECIFICATIONSBIDDERSCONFIRMATIONS/ DEVIATIONS
1 GENERAL .
1.1 Item CS Pressure Balance Plug Valves
1.2 Type Pressure Balance
1.3 Operation type(User to Specify)
Manual Operated
. . Lever for size up to 4" and Hand wheelwith Gear (fully enclosed) for sizes 6" &above
. . Motor Operated
. . Electrical Actuator with Gear
1.4 Size (NPS) As per SOR
1.5 Service Liquid Hydrocarbons(Naphtha/MS/HSD/SKO/ATF/LDO/HFHSD/FO)
1.6 Max WorkingPressure
10 Kg/cm2 (g)
1.7 OperatingTemperature
Ambient (Min 5 Deg C & Max 50 Deg C)
Technical Specifications for CS PRESSURE BALANCED
PLUG VALVES
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 9 of 46
2 DESIGN .
2.1 Design Standard API 6D
2.2 Pattern Short Pattern up to 12 inches and Venturi patternfor 14 inches and above
2.3 End Connections Integral Flanges , Raised Face Serrated Finish(125 AARH) Drilled to ANSI B 16.5
2.4 Face to FaceDimension
ANSI B 16.10
2.5 Pressure Rating ANSI B 16.5 150 #
2.6 Stem Design Anti Blow Out
2.7 API 6D Monogram Required for each valve
2.8 Fire Safe API 6FA
3 MATERIAL OFCONSTRUCTION
.
3.1 Body ASTM A 216 Gr. WCB / WCC
3.2 Plug ASTM A 216 Gr. WCB / WCC
. . Case hardened & Super Lomu treated
. . In case of integral stem & plug design for valvesize up to 4”, ASTM A 105 with Case hardened& Super Lomu treated is also acceptable.
3.3 Cover ASTM A 216 Gr. WCB / WCC / ASTM 105
3.4 Stem (No Casting) EN 19 S or AISI 4140
. . PTFE Coated Super Lomu treated
3.5 Seat Metal to Metal seated
3.6 Packing Graphite
3.7 Cover Gasket SPWD SS+ Grafoil
3.8 Studs / Bolts andNuts
Stud/ Bolts ASTM A 193-.Gr.B7
. Service Nut ASTM A 194-Gr.2H
3.9 Gear Unit (forvalve NPS 150NB& above)
Housing Cast Iron
. . Gear – SG Iron
. . Worm – EN8
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 10 of 46
3.10 Hand Wheel /Lever
Carbon Steel
4 SCOPE OFINSPECTION
To be carried out by BPCL Approved Third partyInspection Agency (TPIA)
. . 1) Review of documents by TPIA
. . a. Material Test Certificates for ALL componentsof valves (Body, Cover, Plug, Stem, Cover boltsand nuts, Gaskets, Packing etc.)
. . b. Manufacturer s Test Certificate for fire testdone on similar design.
. . c. Manufacturer quality Certificate stating thatthey have manufactured the valves as perstandards mentioned in specifications.
. . 2) Witness of Tests by TPIA
. . (All tests shall be carried in accordance with API6D / API 598)
. . a. Visual check 100%
. . b. Dimensional check 10%
. . c. Hydro-test (for shell & seat) 100%
. . d. Pneumatic test for seats 10%
. . e. Antistatic test (for soft seated & lined valve)10%
. . f. Operational test
. . . Smooth opening & closing of valves.- 1 NoRandom Per size
. . . Checking of direction of operation- - 1 NoRandom Per size
. . . Measurement of force required to operate theplug either in open or closed position under themaximum Differential Pressure.- 1 No RandomPer size
. . Material shall be dispatched to respectivelocations with ALL Material Test certificates andInspection Release Note issued by TPIA. Themarking, storage and dispatch of the valves shallbe as per BS 5353 / API 6D.
5 MARKING As per API 6D
6 PAINTING 1.Surface Preparation – Shot / Abrasive Blastingto Swedish Std SA 2 ? or SSPC SP6
. . 2. 2 Coats of Anti Corrosive Paint as per Mfg Std
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 11 of 46
7 DISPATCH 3.All burrs and sharp edges shall be removed andthe inside surface should have smooth finish.
. . 4. Valve to be supplied dry, clean and free frommoisture, dry and loose foreign material of anykind
. . 5. Valve ends shall be protected with Wood,metal or plastic cover
. . 6. Valve to be dispatched in fully closed position
8 DOCUMENTSREQUIRED
.
8.1 Along withTechnical Bid
7. GA Drawing of the offered valves
. . 8. Certificate of Authority to use official API 6DMonogram
. . 9. Fire Safe Testing Certificate for qualifying allsizes offered
8.2 Along withSupplies (3 Sets)
1. As Built Drawings
. . 2. Inspection Release Note by TPIA (Original)
. . 3. Material Test Certificates of valveComponents
. . 4. Fire safe type Test Certificate
. . 5Installation Manual
. . 6. Operation & Maintenance Manual indicatingperiodic lubrication detail & type of sealantrequired.
4 ELECTRICACTUATOR(APPLICABLEFORMOTORIZEDVALVES ONLY)
.
4.1 SCOPE The scope of this specification covers design,manufacture, assembly, shop testing and supplyof electrical motor operated valve actuatorsintended for fully opening and closing valveduty.
. . Each MOV shall be provided with Field Unit (located inside Electric actuator) through which 2-wire communication (over open protocol) will beestablished with the PLC ( In Control Room)
4.2 CODES ANDSTANDARDS
A. The equipment shall comply with therequirements of latest revision of the followingstandards issued by BIS (Bureau of IndianStandards) unless specified otherwise:
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 12 of 46
. . IS 5 Colours for ready mixed paints and enamels
. . IS 325 Three-phase Induction Motors
. . IS 2148 Flameproof enclosures for electricalapparatus
. . IS 4691 Degrees of protection provided byenclosure for rotating electrical machinery
. . IS 4722 Rotating electrical machines-Specification
. . IS 9334 Electric Motor Operated Actuators
. . IS 13947 Low Voltage Switchgear and Controlgear
. . (Parts-1, 3, 4&5)
. . B. In case of imported equipment the standardsof the country of origin shall be applicable ifthese standards are equivalent or more stringentthan the applicable Indian standards.
. . C.The equipment shall also conform to theprovisions of Indian Electricity Rules and otherstatutory regulations currently in force in thecountry.
. . D.In case Indian standards are not available forany equipment, standards issued byIEC/BS/VDE/IEEE/NEMA or equivalent agencyshall be applicable.
. . E.In case of any contradiction between variousreferred standards / specifications / data sheetsand statutory regulations, the following order ofdecreasing priority shall govern:
. . - Statutory regulations
. . - Data sheets
. . - Job specifications
. . - This specification
. . - Codes and standard
4.3 GENERALREQUIREMENTS
A The offered equipment shall be brand new withstate of the art technology and a proven fieldtrack record. No prototype equipment shall beoffered.
. . B. Vendor shall ensure availability of spare partsand maintenance support services for the offeredequipment for at least 15 years from the date ofsupply.
. . C. Vendor shall give a notice of at least one year
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 13 of 46
to the end user of equipment and BPCL beforephasing out the product / spares to enable the enduser to place order for spares and services.
. . D. The vendor shall be responsible for design,engineering and manufacturing of the completeactuator to fully meet the intent and requirementof this specification and attached data sheets.
4.4 SITE ANDSYSTEMCONDITIONS
The electrical motor operated valve actuatorsshall be suitable for operating under siteconditions and system conditions as specified inthe requisition and data sheet. If not specificallymentioned therein, a design ambient temperatureof 45? C and an altitude not exceeding 1000mabove mean sea level shall be considered
4.5 POWER SUPPLY The electrical motor operated valve actuatorsshall be suitable for power supply at 415V ?10%, 50 Hz ? 3 %, 3 phase.
4.6 TECHNICALSPECIFICATIONS
A.Each MOV actuator shall include the motor,actuator unit, gears, position indicators, limitswitches, hand wheel, electrical starter andcontrols, terminal box etc. as a self-containedunit. The actuator shall be sized to provideadequate torque and / or thrust to ensure thecomplete intended travel of the valve under theworst operating and electrical power supplyconditions.
i i.Motor a. The motor shall be 3-phase squirrel cageinduction type unless specified otherwise in thedata sheet. It shall have totally enclosed non-ventilated construction.
. . b. The motor shall be designed for valve actuatorservice with high starting torque and shall besuitable for Direct on line starting. It shall berated for S2-15 minute duty and shall conform toIS 325 or equivalent international standards.
. . c. The motor shall be provided withthermostat(s)/ thermister(s) embedded in the hotspots of motor winding for protecting the motor.
. . d. The motor shall be able to operate the actuatorat 75 % of rated voltage.
. . e. The motor shall have class 'F' insulation withtemperature rise limited to class 'B' limits. Motorwinding shall be treated to resist corrosive agentsand moisture.
. . f. Motor rotor shall preferably be of die-castaluminium and, if brazed, shall be free fromphosphorous.
. . g. Note 1: The rated torque output of electricactuator shall be at least 1.5 times the breaktorque required to operate the valve under max.differential pressure corresponding to the valveclass rating. [Vendor shall submit the breaktorque of valve & rated torque output of selectedactuator for each MOV.]
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 14 of 46
ii Integral Starter andControlTransformer
The reversing starter, control transformer andlocal controls shall be integral with the valveactuator. Solid state control of valve actuator andelectrically isolated interface for remote controlrequirement shall be provided, wherever thesefeatures exist in manufacturer's design.
. . The integral starter shall be supplied with thefollowing devices:
. . a) Electrically and mechanically interlockedreversing contactors for opening and closingoperations
. . b) Control transformer with necessary tappingsand protected with suitable easily replaceablefuses
. . c) Terminal block for external cable connectionfully prewired for internal devices of valveactuator.
. . MOV Actuators operating with AC power supplyshall be provided with Instantaneous Phasereversal protection.
iii Integral PushButton, Selectorswitches.Indications andControl devices
The following local control devices shall beprovided integral with the MOV actuator:
. . a) Push buttons for ‘Opening / Closing / Stop’ ,or alternatively ‘Open / Close’ selector switch
. . b)‘Local/ Off/ Remote’ selector switch, pad-lockable in each position
. . c)Local continuous position indication from‘Valve fully open’ to ‘Valve fully closedposition’, which may be of analogue or digitaltype using mechanical indication / Indicatinglamps / LEDs.
iv Torque and TravelLimit Switches
Torque limit switches shall be provided to protectthe motor from over-loading by cutting-off thepower supply to motor during opening andclosing operations. The limit switches shall bepreset. However, it shall be possible to set thevalue of maximum torque during closing from50% to 100% of rated torque of actuators. Travellimit switch shall be provided to cut-off thepower supply to the motor at the end of presetlimit of valve travel. The switches shall beprovided with requisite number of potential-freecontacts for valve actuator operation and forindication on remote panels. Instead ofmechanical torque limit switches, magnetic pulsecounter to measure and control the stroke ofactuator may be provided, wherever this featureexists in manufacturer's design.
v Control Facilities The internal controls and monitoring circuitsshall be incorporated within the integral starteralong with transformer and control unit of valveactuator.
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 15 of 46
. . Following remote control and monitoringfacilities are to be provided as a minimum:
. . MOV open command
. . MOV close command
. . MOV open status indication
. . MOV close status indication
. . Position status of Remote / Local / Off selectorswitch
. . Remote control facility shall be provided for allthe actuators. The remote control circuits shall bepowered from internally derived control supplyvoltage. In order to cater to remote control andindication requirements for 'Position of Remote /Local / Off selector switch’, an additionalMonitoring relay/ auxiliary relays shall beprovided as a part of the valve actuator. As analternative, a common status contact indicatingthe availability of the MOV actuator for remotecontrol may be provided by monitoring thefollowing:
. . - Loss of one or more phases of power supply
. . - Loss of control circuit supply
. . - Selector switch in local mode
. . - Local stop push button set to 'Off'
. . - Motor thermostat tripped
. . - Any other local fault / abnormal condition.
. . Mandatory Requirement:
. . The ESD port of an Electric Actuator shall have24 V DC power supply & provision ofhardwiring it with ESD Push Button (remotelylocated) through 6 x 1.5 sq mm control cable.
. . The MOV is required to Close/ Open (As perpre-defined fail safe condition) on pressing ofESD PB, irrespective of status of Actuatormounted Local controls (i.e. Local/ Remote/OffPosition Selector switch, Open PB, Close PB ).
. . Actuator shall also have 24 V DC powered portsfor remote visual indication of open / close statusof MOVs
vi Hand Operation A hand wheel with hand / auto lockable levershall be provided for emergency operation of theMOV. The Energization of the motor shallautomatically re-engage power operation.
vii Two-Wire Control This feature is required for each MOV . MOV
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 16 of 46
system actuators shall be suitable for 2-wire controlsystem. These actuators shall have individualfield units (i.e Electronic modules located insideelectric actuators) connectable to centralized PLCthrough a single 2 pair cable (closed loop) forcontrol and monitoring of the MOVs.Communication between the MOVs & PLC shallbe ' Serial RS 485 communication overMODBUS RTU protocol. The vendor shallindicate the maximum number of field units thatcan be connected to a 2-wire control Loop aswell as the maximum distance from the field unitto the centralized PLC. The vendor shall alsoindicate maximum number of control inputs andcontrol status outputs from each field unit thatcan be handled through the 2-wire controlsystem.
. . Each field unit / MOV actuator shall beaddressable from the PLC through a uniqueaddress code. Unless specified otherwise in thedata sheet, all the field settable / adjustableparameters of the MOV actuator shall be settablefrom the PLC. Similarly all the indicationsavailable on the MOV actuator shall be availableat the PLC. Full diagnostic features for the MOVactuators shall be available from the PLC.
. . In case of a fault at any location in the cable loop,the field units shall still have accessibility to /from the PLC through the other section of thecable loop.
. . In case if above functionalities are not possiblethrough PLC , then OEM specific Portableconfiguration Device is to be provided for eachlocation as part of MOV supply.
viii Nameplate Each motorized valve actuator shall be providedwith a stainless steel nameplate furnishing thefollowing details, attached firmly to it at a placeconvenient for reading:
. . a) Actuator tag number as per data sheet
. . b) Motor kW rating, motor time rating, motorsupply voltage, nominal motor phase current,auxiliary switch rating
. . c) Maximum torque setting
. . d) Actuator enclosure type, lubricant type
. . e) Actuator type, wiring diagram number /catalogue number, actuator serial number.
. . A separate nameplate shall be provided forhazardous area application.
ix . The enclosure of complete MOV actuatorincluding motor, integral starter, controltransformer unit and all control devices shallhave minimum IP-65 degree of ingressprotection.
x Wiring and All devices provided in the actuator shall be
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 17 of 46
Terminals wired up to the terminal block. The contacts forremote operation and indication shall also bewired up to the terminal block. Minimum 10%spare terminals shall be provided for futureinterlocks. Internal wiring for power and controlcircuits shall be appropriately sized for MOVactuator rating. Each wire shall be identified atboth ends using PVC ferrules. The terminalcompartment shall be separated from the innerelectrical components of the actuator by means ofa water tight seal so that the actuator electricalcomponents are protected from the ingress ofmoisture and foreign materials when thetechnical cover is removed during installationand maintenance.
xi . Vendor shall be solely responsible for thecompatibility of the MOV actuator with the valveand for the selection and sizing of variouselectrical devices and components in the actuator.
xii . The actuator shall be provided with minimumthree adequately sized cable entries viz, one forpower cable and two for control cables. Suitabledouble compression cable glands shall beprovided with each actuator for all cable entriesand sealing plugs for all control cable entries.The cable glands and plugs shall be made ofSS316
4.7 EQUIPMENTFOR CLASSIFIEDHAZARDOUSAREAS
A. Actuators meant for hazardous areas shallmeet the requirements of IS 2148, IEC 79 orequivalent international standards and shall besuitable for hazardous area classified underZone-1, Gas group IIA / IIB and Temperatureclass T3 (200? C).The manufacturer shall possessvalid test certificates issued by a recognizedindependent test house (CMRI / BASEEFA /LCIE / UL / FM or equivalent) for the offeredactuators. All indigenous equipment shallconform to Indian standards and shall have beentested and certified by Indian testing agencies.All equipment (indigenous and imported) shallalso have valid statutory approvals as applicablefor the specified hazardous locations from CCOEor any other applicable statutory authority. Allindigenous flameproof equipment shall havevalid BIS license and corresponding marking asrequired by statutory authorities.
. . B. Apart from the nameplate indicating the TagNo., a separate nameplate shall also be providedon each actuator to indicate the details of thetesting agency (CMRI or equivalent), testcertificate number with date, statutory approvalnumber with date, approval agency (CCE /DGMS or equivalent), BIS license number withdate, applicable Gas group and Temperature classetc. The nameplates shall be riveted / fixed withscrews and not pasted. In case any of the standarddetails listed above are embossed on theenclosures, the same need not be repeated.
4.8 INSPECTION,TESTING ANDACCEPTANCE
1. The equipment shall be subject to inspectionby BPCL or by an agency authorized by BPCL.Manufacturer shall furnish all necessaryinformation concerning the supply to BPCL / itsinspector. During the course of manufacturing,BPCL or its authorized representative shall befree to visit the works and assess the progress of
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 18 of 46
work and the manufacturer shall render allpossible assistance to do so.
. . 2 Routine and acceptance tests shall be carriedout at the manufacturers' works under- hissupervision and at his own cost. Two weeks'notice shall be given to BPCL for witnessing thefinal testing of the complete assembly to ensuresatisfactory operation of the MOV actuators.Type test certificates shall be furnished with bids.Final acceptance of MOVs at site shall be subjectto successful testing of the MOV actuators withthe valves.
. . 3. Type test certificates, original drawingsreferred in certificates and statutory approvalcertificates and BIS license, where applicable,shall be shown to the inspection agency ondemand. The certificates and BIS license must bevalid at the time of dispatch.
. . 4. Test certificates of bought -out componentsshall be shown to the inspection agency ondemand
4.9 AFTER SALESSERVICESUPPORTFACILITIES
OEMs of Electric Actuators are required to haveService Support Facilities in India along withTrained Engineers for preventive / breakdownmaintenance of the Electric Actuators within 48Hours after receipt of intimation from BPCL.
. . Details of Service Support Facilities are to befurnished by Vendors along with Technical Bid.
4.1 APPROVEDMAKES
M/s Rotork, M/s Limitorque, M/s Auma, M/sBiffi, M/s EIM.
. . NOTE: Compliance of above Technicalspecifications is essential for the validity ofabove approved makes.
5 TESTINGSTANDARD
API 6D / API 598
6 MARKING As per API 6D
7 PAINTING 10. Surface Preparation – Shot / AbrasiveBlasting to Swedish Std SA 2 ? or SSPC SP6
. . 11. 2 Coats of Anti Corrosive Paint as per MfgStd
8 DISPATCH 12.All burrs and sharp edges shall be removedand the inside surface should have smooth finish.
. . 13. Valve to be supplied dry, clean and free frommoisture, dry and loose foreign material of anykind
. . 14. Valve ends shall be protected with Wood,metal or plastic cover
. . 15.Valve to be dispatched in fully closed position
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 19 of 46
9 DOCUMENTSREQUIRED
.
9.1 Along withTechnical Bid
16 GA Drawing of the offered valves
. . 17 Certificate of Authority to use official API DMonogram
. . 18.Fire Safe Testing Certificate for qualifying allsizes offered
9.2 Along withSupplies (3 Sets)
7. As Built Drawings
. . 8.Inspection Release Note by TPIA (Original)
. . 9.Material Test Certificates of valve Components
. . 10.Fire safe type Test Certificate
. . 11.Installation Manual
. . 12.? Operation & Maintenance Manualindicating periodic lubrication detail & type ofsealant required.
. Notes: 1 BPCLApproved TPIA –As per TenderSpecifications .2.Reference shall bemade to latestEdition of API /ASTM standards inforce as on the dateof QAP approval,wherever specifiedin this data sheet.
.
To be completely filled and submitted by Bidder along with the Technical Bid.
Technicalbid
Technical Specifications for CS Plug Valves
Technical Specifications for CS Plug Valves
SR.NO. DESCRIPTION TECHNICAL SPECIFICATIONSBIDDERSCONFIRMATIONS /DEVIATIONS
1 GENERAL DATA .
1.1 Type CS Plug Valve (Short Pattern StandardType)
Technical Specifications for CS Plug Valves
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 20 of 46
1.2 Operation Manually Operated(Fitted with OperatingLever/Wheel)
1.3 Applicable for Sizes up to 100 NB
2 SERVICE DATA .
2.1 Service MS/HSD/SKOFOR TONDIARPETLUBES-- LUBES ADDITIVE
2.2 Max OperatingPressure(Kg/cm2)
7 KG/SQ.CM
2.3 OperatingTemperature (DegC)
55 DEG CFOR TONDIARPET LUBES--75 DEG C
3 DESIGN DATA .
3.1 Design Standard API 6D
3.2 Fire Safe API 607/API 6FA
3.3 Inspection & Testing BS 5353/API 6D
3.4 End Connection Flanged Class 150 Raised Face 125 AARHANSI B 16.5
3.5 Pressure Rating Class 150
3.6 Flange Dimensions& Drilling
ANSI.B.16.5, Class 150
3.7 Face to FaceDimensions
ANSI B 16.10 BS 2080
3.8 Valve PositionIndicator
Required
3.9 LockingArrangement
Required
4 MATERIAL OFCONSTRUCTION
.
4.1 Body Carbon Steel Conforming to ASTM A216Gr.WCB
4.2 Class A1A
4.3 Cover Bolted ASTM A 216 Gr. WCB
4.4 Stem AISI 4140 PTFE Coated with PermanentlyBonded Low friction Coating
4.5 Plug Lubricated Taper PTFE impregnated ASTMA 216 WCB (Hardened)
4.6 Gland Bolted ASTM A 216 Gr. WCB
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 21 of 46
4.7 Gland Packing Graphite, Lubricated
4.8 Cover Bolts/Nuts ASTM A 193 Gr.B7/ ASTM A 194 Gr. 2H
4.9 Cover Gasket SPWD SS 304
4.1 Lubricant Screw with check valve SS 410
4.11 API Monogram API 6D Monogram required
5 SCOPE OFINSPECTION
To be carried out by BPCL Approved Thirdparty Inspection Agency (TPIA)1) Reviewof documents by TPIAa. Material Test Certificates for ALLcomponents of valves (Body, Cover, Plug,Stem, Cover bolts and nuts, Gaskets,Packing etc.)b. Manufacturer s Test Certificate for firetest done on similar design.c. Manufacturer quality Certificate statingthat they have manufactured the valves asper standards mentioned in specifications.2) Witness of Tests by TPIA(All tests shall be carried in accordance withAPI 6D / API 598)a. Visual check 100%b. Dimensional check 10%c. Hydro-test (for shell & seat) 10%d. Pneumatic test for seats 10%e. Antistatic test (for soft seated & linedvalve) 10%f. Operational test.-Smooth opening & closing of valves.- 1 NoRandom Per size.- Checking of direction of operation- - 1 NoRandom Per size.- Measurement of force required to operatethe plug either in open or closed positionunder the maximum Differential Pressure.- 1No Random Per size.Material shall be dispatched to respectivelocations with ALL Material Testcertificates and Inspection Release Noteissued by TPIA. The marking, storage anddispatch of the valves shall be as per BS5353 / API 6D.
To be completely filled and submitted by Bidder along with the Technical Bid.
Technicalbid
UNPRICED BID FORMAT FOR BIDDER
UNPRICED BID FOR VENDOR
BPCL REQUIREMENT BIDDERSRESPONSE
DELIVERY : (WE REQUIRE WITHIN 3 MONTHS FROM THE DATE OF FIRMORDER/CALL-OFF). PL QUOTE YOUR BEST DELIVERY PERIOD
UNPRICED BID FORMAT FOR BIDDER
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 22 of 46
HSN Code% GST
GSTN Code
all MOV are PBPV with actuators
Billing Address(should be same as place from where you will be supplying the materials)
PLEASE MENTION PLACE FROM WHERE MATERIALS WILL BEDESPATCHED(PL GIVE YOUR WORKS/FACTORY ADDRESS)PLEASE MENTIONTHE PERSONS NAME /PHONENO./E-MAIL ID FROM WHOM CLARIFICATIONSCAN BE SOUGHT
Pl mention Country of Origin & Loading PortPlease confirm the item Number / Description and Part Number/ BTN classification /Custom Tariff Number(For Foreign Bidders)
PLEASE CONFIRM, IF YOU ARE AN MSE (MICRO/SMALL ENTERPRISE)? IF YES,PLEASE UPLOAD THE RELEVANT AND VALID SUPPORTING DOCUMENTS (EMII) THIS IS TO AVAIL PURCAHSE PREFERENCE AS PER TENDER TERMS, IFAPPLICABLE.
We would like to enter into an Annual rate contract (ARC) for tendered items withsuccessful bidder. The ARC would be valid for 1year from the date of ARC. We may extendthe contract for further 6 months (on mutual agreement basis) from the date of expiry oforiginal contract. Call -offs would be issued for required quantity as and when required byour E&P.Dept or any other BPCL dept. Vendor to dispatch the materials against call-offsonly. The tender quantities are estimates only. There is no commitment for BPCL to utilisefull tender quantity. BPCL reserves the right to vary the quantities of the tender.The actualcall-offs would be on requirement. All orders placed within contractual period are to becarried out & price to remain firm till completion of order.
We may not uplift the full quantities if actual requirement is less than the ARC quantity.Please note that it is not obligatory on BPCL’s part to uplift any material manufactured byyou in anticipation of call-off. Materials are required at various locations all over India.
BPCL reserves the right to cancel / short close the ARC at any time at its sole descretionwithout giving any reasons to the vendor. BPCL decision would be binding & final. Theevaluation & award will be on overall landed lowest. Pl bid according to item description inprice bid.
all taxes mentioned in GPC are to be read as GST. In case of any error in taxes, then liabilitywill rest on the bidder
The PBG submission along with bills is a must & no value will be retained in lieu of PBG
PAYMENT TERM: The following payment terms shall be applicable a). Our paymentterms are 100% on the 30th day from the receipt and acceptance of materials at site, againstsubmission of Performance Bank Guarantee (PBG) for 10% of total order value. Pleaseconsider this condition in your quotation, as other payment terms may not be acceptable toBPCL. Payments will be released by originator of call-offs/orders.. Vendor to submitPerformance Bank Guarantee (PBG) for 10% of basic order value. Please consider thiscondition in your quotation, as other payment terms may not be acceptable to BPCL.
Technicalbid
Policy for Purchase Preference linked to Local Content
Policy for Purchase Preference linked to Local Content
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 23 of 46
Policy for Purchase Preference linked to Local Content
Sr No Policy for Purchase Preference linked to Local Content Vendor response
1 I /We hereby opt for Policy for Purchase Preference linked to Local Content
Price bid
foreign bidder to quote delivered duty paid price upto site.
Exchange rate as on date of opening of price bid will be considered for evaluation.
.
Column name Bidder response
Item Sl. No. 1
Item Description VLV PLUG FL 150# CS TrCS 50NB
Location BPCL Location all over India
Quantity 50
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 2
Item Description VLV PLUG FLG 150# CS TrCS 80NB
Location BPCL Location all over India
Quantity 200
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
PRICE-BID (FOR FOREIGN BIDDER)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 24 of 46
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 3
Item Description VLV PLUG FLG 150# CS TrCS 100NB
Location BPCL Location all over India
Quantity 100
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 4
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 50NB
Location BPCL Location all over India
Quantity 72
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 5
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 80NB
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 25 of 46
Location BPCL Location all over India
Quantity 3050
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 6
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 100NB
Location BPCL Location all over India
Quantity 15
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 7
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 150NB
Location BPCL Location all over India
Quantity 4
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 26 of 46
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 8
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 200NB
Location BPCL Location all over India
Quantity 13
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 9
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 250NB
Location BPCL Location all over India
Quantity 1
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 10
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 300NB
Location BPCL Location all over India
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 27 of 46
Quantity 7
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 11
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 350NB
Location BPCL Location all over India
Quantity 8
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 12
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 400NB
Location BPCL Location all over India
Quantity 4
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 28 of 46
Column name Bidder response
Item Sl. No. 13
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 450NB
Location BPCL Location all over India
Quantity 2
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 14
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 500NB
Location BPCL Location all over India
Quantity 11
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 15
Item Description VLV PLUG FLG 150# CS PR.BL TrCS 600NB
Location BPCL Location all over India
Quantity 4
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 29 of 46
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 16
Item Description VLV PLUG FLG 150# CS MOV TrCS 50NB
Location BPCL Location all over India
Quantity 1
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 17
Item Description VLV PLUG FLG 150# CS MOV TrCS 80NB
Location BPCL Location all over India
Quantity 6
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 30 of 46
Column name Bidder response
Item Sl. No. 18
Item Description VLV PLUG FLG 150# CS MOV TrCS 100NB
Location BPCL Location all over India
Quantity 73
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 19
Item Description VLV PLUG FLG 150# CS MOV TrCS 150NB
Location BPCL Location all over India
Quantity 30
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 20
Item Description VLV PLUG FLG 150# CS MOV TrCS 200NB
Location BPCL Location all over India
Quantity 9
Unit of Measurement (UOM) each (EA)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 31 of 46
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 21
Item Description VLV PLUG FLG 150# CS MOV TrCS 250NB
Location BPCL Location all over India
Quantity 16
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 22
Item Description VLV PLUG FLG 150# CS MOV TrCS 300NB
Location BPCL Location all over India
Quantity 10
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 32 of 46
Item Sl. No. 23
Item Description VLV PLUG FLG 150# CS MOV TrCS 350NB
Location BPCL Location all over India
Quantity 5
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 24
Item Description VLV PLUG FLG 150# CS MOV TrCS 400NB
Location BPCL Location all over India
Quantity 1
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 25
Item Description VLV PLUG FLG 150# CS MOV TrCS 450NB
Location BPCL Location all over India
Quantity 10
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 33 of 46
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 26
Item Description VLV PLUG FLG 150# CS MOV TrCS 500NB
Location BPCL Location all over India
Quantity 10
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Column name Bidder response
Item Sl. No. 27
Item Description VLV PLUG FLG 150# CS MOV TrCS 600NB
Location BPCL Location all over India
Quantity 5
Unit of Measurement (UOM) each (EA)
Please mention the Currency in whichyou have quoted(should be either inUSD or EURO)
DDP Price per UOM (in your currency)( should include TPIA charges)
DDP Price per UOM (In Words in yourCurrency)
Price bid
PRICE BID (FOR INDIAN BIDDER)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 34 of 46
PRICE BID (FOR INDIAN BIDDER)
PRICE BID FORMAT
Column name Bidder response
ITEM CODE 1
ITEM DESCRIPTION VLV PLUG FL 150# CS TrCS 50NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 50
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 2
ITEM DESCRIPTION VLV PLUG FLG 150# CS TrCS 80NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 200
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 3
ITEM DESCRIPTION VLV PLUG FLG 150# CS TrCS 100NB
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 35 of 46
LOCATION BPCL Location all over India
QUANTITY REQUIRED 100
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 4
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 50NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 72
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 5
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 80NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 3050
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 36 of 46
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 6
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 100NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 15
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 7
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 150NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 4
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 8
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 37 of 46
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 200NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 13
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 9
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 250NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 1
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 10
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 300NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 7
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 38 of 46
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 11
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 350NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 8
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 12
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 400NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 4
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 39 of 46
Column name Bidder response
ITEM CODE 13
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 450NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 2
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 14
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 500NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 11
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 15
ITEM DESCRIPTION VLV PLUG FLG 150# CS PR.BL TrCS 600NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 4
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 40 of 46
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 16
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 50NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 1
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 17
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 80NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 6
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 41 of 46
% of GST
Column name Bidder response
ITEM CODE 18
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 100NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 73
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 19
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 150NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 30
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 20
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 200NB
LOCATION BPCL Location all over India
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 42 of 46
QUANTITY REQUIRED 9
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 21
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 250NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 16
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 22
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 300NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 10
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 43 of 46
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 23
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 350NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 5
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 24
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 400NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 1
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 25
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 450NB
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 44 of 46
LOCATION BPCL Location all over India
QUANTITY REQUIRED 10
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 26
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 500NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 10
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Column name Bidder response
ITEM CODE 27
ITEM DESCRIPTION VLV PLUG FLG 150# CS MOV TrCS 600NB
LOCATION BPCL Location all over India
QUANTITY REQUIRED 5
UNIT OF MEASUREMENT (UOM) each (EA)
Basic price in Rs per UOM
Basic price in Rs per UOM (In Words)
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 45 of 46
TPIA Charges in % of Basic
Freight Charges in % of Basic
% of GST
Prebid committee published
Start date 15/11/2017 11:00:00 End date 15/11/2017 13:00:00
Mode of pre bid Offline Published date 08/11/2017 09:39:34
Published by D Manimaran (CPO (M) -Procurement Group 3)
Remarks Approved to publish
Tender reference No : CRFQ1000288539 System ID : 29141
Tender title : GLOBAL TENDER FOR Annual Rate Contract for supply of CS Plug valve(Manual)/CS Pressure Balance Plug valves (BothManual & MOV)conforming to API 6D to various BPCL Locations all over India.
page 46 of 46