tender for construction of nro at kaimalgarh, … · 2013-12-09 · expect our vendors to...

This Section to be enclosed with the PQ Bid

TENDER FOR CONSTRUCTION OF NRO AT KAIMALGARH, DISTRICT: JHAJJAR, HARYANA

Quotations are invited from all vendors registered with BPCL, with keenness to work in the state of

Haryana & with registration value upwards of Rs. 25 lakhs. Please quote your best rates. SERVICE TAX

shall be payable extra as per prevalent norms.

The tender document has been created vide BPCL SAP Collective RFQ no. 1000124732. To ensure equal

opportunity for all & to demonstrate transparency in our systems, this document has been uploaded on

the BPCL website http://www.bharatpetroleum.in , and is accessible from the tenders section, under

the category AMM, HRY & H.P.

Request for the document, or any clarifications can also be made by e-mail addressed to

[email protected] or [email protected]

The tender document shall also be available at this office in the form of a CD, and can be obtained on

request on any working day, during normal working hours.

Hard copies of the document shall not be distributed by this office.

To further publicise this tender, this office shall spread the communication to all registered vendor,

through Construction Group Engineers in BPCL Retail North.

The entire manuscript has to be downloaded by the interested vendor from the website. Hard copy

prints to be taken of the entire manuscript & each page to be signed, along with the seal, by the

vendor & duly filled up prior to submission. Please submit your bids in a spiral binding, so as to ensure

all pages intact. The sealed envelopes should carry the labels provided in ANNEXURE B. Vendors should

not attempt modifying or changing the contents of the document. In case such an attempt is discovered,

the same shall be rejected.

To witness the tender opening, we request all vendors to be present in this office of AMM HARYANA &

HIMACHAL, MANAGER CONSTRUCTION GROUP, PANIPAT, BHARAT PETROLEUM CORPORATION

LIMITED, PANIPAT INSTALLATION, NEAR IOC REFINERY, VILLAGE DADLANA, PANIPAT, HARYANA –

132140.

It is understood that the vendor have thoroughly gone through the entire information placed in the

tender enquiry & are committed to abide by the same.

This is a 2 Bid Tender. The 2 Bids comprise of the:-

1. Pre Qualification Bid (PQ)

2. Price Bid.

The 2 bids will have to be submitted by the vendor in separate plain envelopes. The envelopes

containing the bids will have to be sealed and placed in a bigger envelope. For each of these envelopes,

labels have been provided in ANNEXURE B. Please tear these labels & paste these on the respective

envelopes. This office shall first open & scrutinize the Pre Qualification Bid. Only after examining the PQ

& finding it in order, the price Bid shall be opened/ considered for evaluation. Hence it is vital that the

bids are labeled properly, using only the labels provided in ANNEXURE B.

VENDOR SAP CODE _______________________ SIGNATURE & SEAL OF THE VENDOR __________________


(a) PRE QUALIFICATION BID: -

Vendors participating in this tender have to submit the following pertinent documents, to be able to

qualify their Price Bid for evaluation. Please note that all the documents mentioned below are

sacrosanct. If any of the documents submitted by the vendor, as below lack in any manner, the

vendor shall be disqualified & the Price Bid shall not be opened, rejected & shall not be considered

for evaluation. The Undertaking from the Vendor, as per ANNEXURE A, has to be attached with the

Prequalification Bid.

I. Vendor to submit an Undertaking that declares the following 2 points:-

i. That the vendor is ready & willing to carry out jobs in the state of Haryana.

ii. That the vendor is capable of mobilizing resource, manpower & infrastructure at

the site, within a maximum of 3 days of award of LOI.

II. Registration with BPCL as a vendor: - This tender is invited from all Vendor registered

with BPCL. Hence kindly submit a copy of the registration letter. This letter should

clearly specify the Financial Limit of Registration. For some vendors, this document is

already available in this office. Notwithstanding the above, Submission of the

registration letter with this tender is mandatory for all vendors.

III. Financial Limit of Registration: - Vendors with Registration for Jobs of Rs. 25 Lakhs &

above shall qualify this criterion.

IV. PF Registration: - This is a mandatory requirement for all Vendors. Hence kindly submit a

copy of Valid PF Registration.

V. VAT Registration for carrying out jobs in Haryana.

i. Kindly submit a copy of Valid VAT Registration that entitles the firm for carrying

out jobs in the state of Haryana.

OR ii. If this registration is not available readily, kindly submit an Undertaking,

confirming that in case job is awarded, VAT Registration shall be applied for & a

copy of the Application receipt shall be submitted to this office within 7 working

days of award of LOI.

VI. Service Tax Registration: - This is a mandatory requirement for all Vendors. Hence kindly

submit a copy of valid Service Tax registration.

The format for the undertakings as mentioned in points above has been enclosed as ANNEXURE A.

Please use this format for the declarations.

(b) PRICE BID: - The Price Bid constitutes the rates offered by the vendors for each of the items

specified in the Bill of Quantities provided in this document. Price Bid of the vendor shall be

opened/ considered for evaluation only after the vendor qualifies the Pre Qualification Bid.

Procedure of filling up the Price Bid, process of evaluation/ rejection has been specified in the

Tender document already. We have also illustrated the ideal way to fill up the Price Bid.

The Price Bid Bill of Quantities has been prepared based on the existing Schedule of Rates (SOR). All

vendor registered with BPCL have access to this document & fully understand the process of

determining this Schedule of Rates. We have floated this tender to ensure that equal opportunity is

given to all vendor to get jobs & also to demonstrate transparency in our systems. Reciprocally we



expect our vendors to demonstrate utmost sincerity in their bidding. Following points should be kept in

mind by all bidders while quoting for this RFQ:-

1) ANNEXURE A: For the PQ Bid, vendors are required to give a declaration of Facts.

a. Please be absolutely sure about the correctness of the facts being declared by you.

b. Please fill in all the blanks provided in the Declaration, including Vendor name, Date of

declaration, Registration Nos., date of Issue, Name of Issuing Department.

c. Please fill in the declaration exactly in line with the Illustration enclosed.

d. At the bottom of the declaration space is provided for putting the Vendor’s stamp &

signature. Please do the needful.

e. Incomplete declarations shall reflect on the vendor’s lack of sincerity, this shall hamper

the vendor’s chances for being considered for evaluation & shall also attract disciplinary

action from this office.

2) As stated above, the BOQ has been prepared using the existing Schedule of Rates & it is amply

clear that all vendor have access to the SOR Document. Hence, the following needs to be borne

in mind while filling in the Price Bid:-

a. Vendor should refrain from quoting rates abnormally higher than the SOR Rates for all

the items. This is viewed as their lack of sincerity & lack of interest for this tendering

process. This unnecessarily prolongs our processing time & it therefore has an adverse

bearing on the start of execution.

b. Vendor should refrain from quoting rates abnormally lower than the SOR Rates, unless

they have very valid reasons and conviction to do so. Such vendor shall have to stand by

their quotations & should understand that this office shall not allow any dispensations,

or compromises with the quality/ quantity or specifications of the work.

c. It is clearly stated in the tender conditions that discounts on individual rates or on the

total Contract Value is not acceptable. Such bids shall be rejected outright.

d. Sufficient time is given to vendor to submit their quotes, hence utmost care to be taken

by all vendor to ensure that there are no calculation mistakes, cutting, over writing etc.

e. Vendors have to sign & stamp on all sheets of the tender document. Also please

mention the SAP Vendor code on all sheets where space has been provided for the

same.



PLEASE CHOOSE

EITHER POINT 7) OR

POINT 8). CLEARLY

INDICATE YOUR

CHOICE BY PUTTING

A TICK

APPROPRIATELY

Vendor to sign & duly stamp on

each place as below

Vendor to MENTION SAP CODE

ON EACH PLACE BELOW

ANNEXURE A

(To be attached with the documents of the Prequalification Bid)

DECLARATION OF FACTS BY M/s ____XYZ ENTERPRISES LIMITED____________ (Vendor Name to be filled in above)

Date: - XX/XX/XXXX

To, AMM Haryana & Himachal

BHARAT PETROLEUM CORPORATION LIMITED,

BPCL PANIPAT INSTALLATION, NEAR PANIPAT REFINERY,

BAHOLI, PANIPAT, HARYANA - 132140

Subject: Declaration of Facts & Submission of PQ Bid Documents pertaining to CRQ No.:- 1000124732,

Tender for Construction of NRO at Kaimalgarh, District: Jhajjar, Haryana.

Dear Sir,

In respect of the subject as above, I/ We declare the following, to best of my/ our knowledge:-

1) I/ We are ready & willing to carry out jobs in the state of Haryana.

2) I/We are capable of mobilizing resource, manpower & infrastructure at the site, within a maximum

of 3 days of award of LOI/ Purchase Order.

3) I/We are registered vendors of BPCL. Copy of registration letter dated XX/XX/XXXX, issued from

BPCL Office at ABC LOCATION, by Manager so & so has been enclosed herewith.

4) The Financial Limit of the Registration as per the letter enclosed is Rs. xx Lakhs.

5) I/We have a valid PF Registration. Registration No. abcdxyz, Document Date xx/xx/xxxx,

Issued By xyz office. Copy of PF Registration is enclosed herewith. We shall produce the original

document for verification if so demanded by your office.

6) I/We have a valid Service Tax Registration. Registration No. abcdxyz, Document Date

xx/xx/xxxx, Issued By xyz office. Copy of the same is enclosed herewith. We shall produce the

original document for verification if so demanded by your office.

7) I/We have a valid VAT Registration for carrying out jobs in Haryana.

Registration No. abcdxyz, Document Date xx/xx/xxxx, Issued By

xyz office. Copy of the same is enclosed herewith. We shall produce the

original document for verification if so demanded by your office.

8) I/We do not have a valid VAT Registration for carrying out jobs in the state

of Haryana. However, this is to confirm that in case job is awarded to us,

VAT Registration shall be applied for & a copy of the Application receipt

shall be submitted to this office within 15 working days of award of LOI. If

we default on this, BPCL office can, at it’s discretion, invoke clauses 24 &

25 of the General Conditions of Tender.

9) All the above statements have been made true to facts. If any of the statements is found in variance

with facts at any later date, we fully understand that BPCL Office can take disciplinary action as it

deems fit.

(Between Points 7 & 8 above, please strike out whichever is not applicable. This means that if VAT

registration is already available, then copy of the VAT registration is to be enclosed & Point 8 has to be

struck out. Or if VAT Registration is not available, please strike out Point No. 7. If point 7 is left blank, it

will be construed that the vendor has opted for commitment mentioned in point 8).

VENDOR SAP CODE _______________________ SIGNATURE & SEAL OF THE VENDOR __________________ 999999999999999999999999


ANNEXURE A

(To be attached with the documents of the Prequalification Bid)

DECLARATION OF FACTS BY M/s ______________________________________________ (Vendor Name to be filled in above)

Date: - ____________

To, AMM Haryana & Himachal


BPCL PANIPAT INSTALLATION, NEAR PANIPAT REFINERY,

BAHOLI, PANIPAT, HARYANA - 132140

Subject: Declaration of Facts & Submission of PQ Bid Documents pertaining to CRQ No.:- 1000124732,

Tender for Construction of NRO at Kaimalgarh, District: Jhajjar, Haryana.

Dear Sir,

In respect of the subject as above, I/ We declare the following, to best of my/ our knowledge:-

10) I/ We are ready & willing to carry out jobs in the state of Haryana.

11) I/We are capable of mobilizing resource, manpower & infrastructure at the site, within a maximum

of 3 days of award of LOI/ Purchase Order.

12) I/We are registered vendors of BPCL. Copy of registration letter dated __________, issued from

BPCL Office at ________________________, by ______________________has been enclosed

herewith.

13) The Financial Limit of the Registration as per the letter enclosed is Rs. _________ Lakhs.

14) I/We have a valid PF Registration. Registration No. ______________, Document Date ___________,

Issued By _______________________________________. Copy of PF Registration is enclosed

herewith. We shall produce the original document for verification if so demanded by your office.

15) I/We have a valid Service Tax Registration. Registration No. ______________, Document Date

___________, Issued By _____________________________________. Copy of the same is enclosed

herewith. We shall produce the original document for verification if so demanded by your office.

16) I/We have a valid VAT Registration for carrying out jobs in Haryana. Registration No.

______________, Document Date _________, Issued By _________________________. Copy of the

same is enclosed herewith. We shall produce the original document for verification if so demanded

by your office.

17) I/We do not have a valid VAT Registration for carrying out jobs in the state of Haryana. However,

this is to confirm that in case job is awarded to us, VAT Registration shall be applied for & a copy of

the Application receipt shall be submitted to this office within 7 working days of award of LOI. If we

default on this, BPCL office can, at it’s discretion, invoke clauses 24 & 25 of the General Conditions

of Tender.

18) All the above statements have been made true to facts. If any of the statements is found in variance

with facts at any later date, we fully understand that BPCL Office can take disciplinary action as it

deems fit.

(Between Points 7 & 8 above, please strike out whichever is not applicable. This means that if VAT

registration is already available, then copy of the VAT registration is to be enclosed & Point 8 has to be

struck out. Or if VAT Registration is not available, please strike out Point No. 7. If point 7 is left blank, it

will be construed that the vendor has opted for commitment mentioned in point 8).



ANNEXURE B

TEAR THIS LABEL TO PASTE ON THE PRE QUALIFICATION BID ENVELOPE

TEAR THIS LABEL TO PASTE ON THE PRICE BID ENVELOPE

TEAR THIS LABEL TO PASTE ON THE MAIN ENVELOPE

PRE QUALIFICATION BID To,

AMM HARYANA & HIMACHAL, MANAGER CONSTRUCTION GROUP, PANIPAT

BHARAT PETROLEUM CORPORATION LIMITED, BPCL PANIPAT INSTALLATION, NEAR PANIPAT REFINERY, BAHOLI, PANIPAT, HARYANA – 132140

--------------------------------------------------------------------------------------------------------------------------- CRFQ No. 1000124732

TENDER FOR CONSTRUCTION OF NRO AT KAIMALGARH, DISTRICT: JHAJJAR, HARYANA CLOSING DATE/TIME: 19

th AUGUST, 2010, 1500 Hrs.

TENDER OPENING: 19th AUGUST, 2010, 1530 Hrs.

PRICE BID To,

AMM HARYANA & HIMACHAL, MANAGER CONSTRUCTION GROUP, PANIPAT

BHARAT PETROLEUM CORPORATION LIMITED, BPCL PANIPAT INSTALLATION, NEAR PANIPAT REFINERY, BAHOLI, PANIPAT, HARYANA – 132140

--------------------------------------------------------------------------------------------------------------------------- CRFQ No. 1000124732

TENDER FOR CONSTRUCTION OF NRO AT KAIMALGARH, DISTRICT: JHAJJAR, HARYANA CLOSING DATE/TIME: 19

th AUGUST, 2010, 1500 Hrs.


To, AMM HARYANA & HIMACHAL,

MANAGER CONSTRUCTION GROUP, PANIPAT BHARAT PETROLEUM CORPORATION LIMITED, BPCL PANIPAT INSTALLATION,

NEAR PANIPAT REFINERY, BAHOLI, PANIPAT, HARYANA – 132140 ---------------------------------------------------------------------------------------------------------------------------

CRFQ No. 1000124732 TENDER FOR CONSTRUCTION OF NRO AT KAIMALGARH, DISTRICT: JHAHHAR, HARYANA

CLOSING DATE/TIME: 19th AUGUST, 2010 1500 Hrs.


AMM HARYANA & HIMACHAL

MANAGER CONSTRUCTION GROUP, PANIPAT


PANIPAT INSTALLATION, NEAR IOC REFINERY,

VILLAGE DADLANA, PANIPAT, HARYANA - 132140

CONSTRUCTION OF NRO AT KAIMALGARH,

DISTRICT: JHAJJAR, HARYANA

COLLECTIVE RFQ NO. 1000124732

LIMITED TENDER ENQUIRY.

ALL VENDORS REGISTERED WITH BPCL, WITH REGISTRATION OF Rs. 25 LAKH & ABOVE.

19th AUGUST 2010, 1500 Hrs.

29/07/2010

0180-2578881

+919958692525

TENDER OPENING TIME:- 19th AUGUST,2010, 1530 Hrs.


PLEASE ENCLOSE THIS WITH THE PRICE BID

COLLECTIVE RFQ NO. 1000124732

19th AUGUST, 2010, 1500 Hrs.

CONSTRUCTION OF NRO AT KAIMALGARH, DISTRICT: JHAJJAR, HARYANA

60 DAYS FROM THE DATE OF

AGREEMENT.



CRFQ No.:- 1000124732, CONSTRUCTION OF NRO AT KAIMALGARH, DISTRICT: JHAJJAR, HARYANA



Material/Services required at:

Rewari TOP

Bharat Petroleum Corporation Ltd.

Bawal Road,OPP.IOC Terminal

Village Karnawas Rewari- 123401

India______________________________________________________________________________________________________________________________________________Item Material RFQ Qty Unit Unit Price

Description Delivery date Value

Amount in Words_______________________________________________________________________00010 COMPOUND WALL NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00010 covers the following services:

10 7006796 2.500 M3

EXC ORD SOIL UPTO 1.5 M (Cubic meter)

EXCAVATION Excavation in all kinds of soil such as black cotton, silt, earth;

murrum; gravel; kankar; boulders; etc. excluding soft and hard rock and carting away

the excavated earth to an unobjectionable area upto 100 Mts.from plot boundary or

stacking rubble or spreading and leveling within the site as the case may be back

filling in layers of 150mm thick including compacting the trenches with excavated

earth free from organic matters; stones; sharp edged material; etc; complete. EXC

SOIL UPTO1.5 M_______________________________________________________________________ 20 7006947 2.500 M3

FOUNDN . PCC WITH 20MM METAL 1:3:6 (Cubic meter)

FOUNDATION; PLINTH; SUPERSTRUCTURE Providing & laying cement concrete at all

height/depth using 20mm metal incl. necessary shutting form work & curing for a

period of 14 days Removing of centering ,shuttering, scaffolding shall be done

carefully without such shock or vibration as would damage the concrete in foundation

and or in plinth. 1:3:6 mix._______________________________________________________________________ 30 7007632 20.000 M3

BLDG MASONRY BRICK FOUNDN CM 1:6 (Cubic meter)

Brick masonry work in foundation using best quality, locally available bricks CM

1:6_______________________________________________________________________ 40 7006169 44 M2

BLDG PLASTER SFC 1:6 12MM THICK (Square meter)

Sand faced cement plaster in CM 1:6 12mm thick_______________________________________________________________________ 50 7006170 44 M2


To,

BPCL ESTIMATE

MUMBAI . India - 400038.

Ph : , Fax : .

Vendor Code:300648

Quotation Due Date:19.08.2010

For Bharat Petroleum Corporation Ltd.

TRIAL PRINT OUT

REQUEST FOR QUOTATION Collective RFQ Number / Date

1000124732 / 29.07.2010

Contact person/Telephone

CONS GRP PANIPAT

Fax :

RFQ No / Date : 6000423739 / 29.07.2010

Page 1 of 24

Item Material RFQ Qty Unit Unit Price


Amount in Words_______________________________________________________________________ Sand faced cement plaster in CM 1:6 19mm thick_______________________________________________________________________ 60 7007343 10 RM

SANITARY . HD PVC PIPE 75MM (RUNNING METER)

SANITARY Providing & laying,jointing,fixing & testing heavy duty 6 kg/cm2 UPVC pipe

ISI marked pipe lines incl. fitting like tees,bends,sockets,elbows etc. in trenches

in the ground/in wall ,cutting, & testing etc. complete 75 MM_______________________________________________________________________ 70 9001169 10.000 M3

Prov n Lay . Bldg Masonry SS 1:6 (Cubic meter)

Providing n laying in building,

Brick masonary work in CM 1:6 in superstructure using best quality, locally

available bricks with a compressive strength of min.75Kg/Sqcm including

scaffolding where ever required, curing, disposal of surplus materials as

directed- In super structure for all heights.

_______________________________________________________________________ 80 7006180 34 M2

BLDG PLASTER . 40TK DPC IN CC1:2:4 (Square meter)

Providing and laying 40mm thick DPC in CC 1:2:4 (1 Part of cement; 2 Part of sand

and 4 part of graded stone aggregate) upto 10mm nominal size laid in proper level

line; position as per drawing &a coat of Bitumen of graded 85/25 applied @ 1.7

kg/sq.m after cleaning the surface with brush & finally with a piece of cloth

lightly soaked in kerosene oil incl. cost of waterproofing material mixed in CC as

per manufacturer's spec. complete in all respect as directed by E.O._______________________________________________________________________ 90 7006832 147 RM

FENCING . CHAINLINK 1.8 M HIGH (RUNNING METER)

FENCING/BOUNDARY WALL Supplying and erecting chainlink fencing with 2nos. 4mm GI

straining wire on the following heights of angle iron posts at approximately 2.5m

centre to centre embedded in CC 1:3:6as per our standard drawing no E.1S.01.001 incl.

painting vertical post with 2coats each of Red oxide and aluminium paint. 1.8m high_______________________________________________________________________00020 DRIVEWAY NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00020 covers the following services:

10 7006847 3,470.000 M3

FILLING EARTH AVAIL WITH 10T ROLLER (Cubic meter)

EARTH FILLING Back filling with approved quality earth in 150 mm thick layers well

compacted after sprinkling required quantity of water upto a max of 500Cum Brought

from outside Consolidate with 8-10T roller_______________________________________________________________________ 20 7006846 200.000 M3

FILLING EARTH AVAIL WITH 10T (Cubic meter)

RFQ Number :6000423739 Date : 29.07.2010To: BPCL ESTIMATE MUMBAI - 400038 India


TRIAL PRINT OUT

Page 2 of 24



Amount in Words_______________________________________________________________________ EARTH FILLING Back filling with approved quality earth in 150 mm thick layers well

compacted after sprinkling required quantity of water upto a max of 500Cum Available

within the site Consolidate with 8-10T roller_______________________________________________________________________ 30 7007254 2,880 M2

DWAY . WBM 100 MM THICK (Square meter)

ROAD WORK Supplying and spreading stone aggregate of required size as per our

specification in 2 layers to achieve the required thickness as mentioned below,

followed by supplying and spreading 20mm down stone aggregate to fill

voids,re-rolling the same with 8 - 10 ton roller, followed by supplying and spreading

murrum or quarry dust or approved quality earth, consolidating the same with optimum

water moisture till the surface is evenly and densely consolidate to achieve. NOTE :

Please note that each layer of stone aggregate has to be consolidated with 8 - 10 ton

roller. During the murrum filling, watering should be done per each run of the roller

and minimum 5 such runs have to be undertaken on subgrade. During each such sun if

any void is observed after watering the same shall be filled using 1:1mix of 20 mm

metal of murrum. The spreading of murrum,sprinkling of water, sweeping with a broom

and rolling shall continue until the slurry that is formed well after filling the

voids formed ahead of the wheels of the moving roller and any undulations in the

surface developed due to rolling shall be made good. The rates should be inclusive

of all cost of equipment, material, labour etc. 100 mm thick compacted WBM using

stone aggregate of size 40- 63 mm_______________________________________________________________________ 40 7007942 8.000 M3

DWAY . PAVER BL DWAY . PAVER BL KERB (Cubic meter)

PROVIDING & FIXING PRECAST/PREFABRICATED KERB STONE IN ALL SHAPES & SIZES AS

APPROVED BY SITE INCHARGE OF 1:2:4 CEMENT CONCRETE AND FIXED WITH CEMENT

MORTAR 1:2 INCL. CENTERING & SHUTTERING ETC. AND FINISHED SMOOTH WITH 6 MM

CEMENT PLASTER 1:3 ETC. COMPLETE

_______________________________________________________________________ 50 7006796 75.000 M3








SOIL UPTO1.5 M_______________________________________________________________________ 60 7007269 200 M2

DWAY BITU PREMIX CARPET 50TK (Square meter)

ROAD WORK Premix Carpet : Cleaning the existing surface with wirebrush & removing

all lose aggregate & traces of fine dust which get accumulated while brushing fine



TRIAL PRINT OUT

Page 3 of 24



Amount in Words_______________________________________________________________________dust shall be removed from the surface by blowing with gunny bag or any other means

as approved by the engineer.Tack Coat : Bitumen shall be heated to a temp. as

specified for the grade used and maintained at that temp. for the specified duration

(even for premix & seal coat bitumen should be heated as specified above) The tack

coat shall be applied evenly using 1Kg/sq m of bitumen over cleaned/dry surface by

means of pressure distributor/sprayer or any other means. The binder shall be

applied longitudenally along the length of the road & never across it. Premix Carpet

: Spreading pre mix stone aggregate of 10 mm size to a required thickness . Stone

aggregate shall be mixed with bitumen (grade 30/40) 56kg/Cu m. Spreading shall be

done evenly to obtain a uniform surface. Road surface shall be compacted by 10 ton

roller immediately after spreading the premix. Rolling shall be started at edges &

worked towards center. Each pass of roller shall uniformly overlap not less than

1/3rd of the track made by earlier pass. Usually5-6 runs shall be made for compacting

surface. Along curbs manholes & all other places not accessible to the roller shall

be compacted by means of steel rammers.Seal Coat: Providing 12mm thick seal coat

using sand precoated with bitumen 1kg/sq.m. dry & bitumen should be thoroughly mixed

to have uniform mix. The rolling shall be done as explained above. Rates include cost

of all material,labour,equipment etc. complete. 50mm Premix carpet_______________________________________________________________________ 70 7007270 200 M2

DWAY BITU SEAL COAT 12TK (Square meter)

ROAD WORK Seal Coat: Providing seal coat using sand/6mm grit precoated with bitumen

& bitumen should be thoroughly mixed to have uniform mix. The rolling shall be done

as explained above. Rates include cost of all material,labour,equipment etc.

complete. 12mm seal coat with bitumen 1Kg/Sqm_______________________________________________________________________ 80 7006944 2.000 M3


FOUNDATION; PLINTH; SUPERSTRUCTURE Providing and laying plain cement concrete using

40mm metal incl. shuttering form work and curing for a period of 14days. Removing of

centering; shuttering; shoring scaffolding shall be done carefully without such shock

or vibration as would damage the concrete in foundation and/or plinth 1:4:8 mix._______________________________________________________________________ 90 9001165 15.000 M3

Prov n Lay . Bldg Masonry FN 1:6 (Cubic meter)


Brick masonry work in CM1:6 in foundation using best quality, locally

available bricks with a compressive strength of min. 75Kg/Sqcm including


directed- In foundation upto plinth level.

_______________________________________________________________________00040 PUMP TANK INSTALLING NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00040 covers the following services:

10 7007577 1 EA

TANK . INSTALL U/G TANK E/P 15 KL TANK (each)



TRIAL PRINT OUT

Page 4 of 24



Amount in Words_______________________________________________________________________

MECHANICAL - UNDERGROUND TANKS/PIPELINES Installation of cylindrical underground

tank without HD arrangement as per our Drg. in Earth pit, after excavation in all

kinds of soil, bailing out of water, lowering the tank, levelling and testing the

tank hydrostatically with fresh water to a pressure of 0.36kg/ cm2 for 2 hrs.

painting with 2 coats of PF4 applying Shalimar tar plastic3 mm thick including cost

of paint to exterior surface of the tank, back filling of earth 150 mm, layers

including adequate watering, ramming etc. as per std. drawing incl. cleaning of the

site, providing 3 mm thick compressed graphite asbestos at manhole cover incl. supply

of materials, labour, complete to the satisfaction of Engineer-in-Charge with

RCC/masonry kerb wall. 15 KL tank as per std drg no RE.DRG.401_______________________________________________________________________ 20 7007578 1 EA

TANK . INSTALL U/G TANK E/P 20 KL TANK (each)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Installation of cylindrical underground

tank without HD arrangement as per our Drg. in Earth pit, after excavation in all

kinds of soil, bailing out of water, lowering the tank, levelling and testing the

tank hydrostatically with fresh water to a pressure of 0.36kg/ cm2 for 2 hrs.

painting with 2 coats of PF4 applying Shalimar tar plastic3 mm thick including cost

of paint to exterior surface of the tank, back filling of earth 150 mm, layers

including adequate watering, ramming etc. as per std. drawing incl. cleaning of the

site, providing 3 mm thick compressed graphite asbestos at manhole cover incl. supply

of materials, labour, complete to the satisfaction of Engineer-in-Charge with

RCC/masonry kerb wall. 20 KL tank as per std drg no RE.DRG.402_______________________________________________________________________ 40 8001033 132 RM

PIPE.50MM B. CL PIPE ABOVE 20 MT EARTH (RUNNING METER)

Supplying, laying, pressure testing @ 1.5 kg/cm2 'B' class MS black heavy duty

pipeline incl. Heavy duty forged MS fittings like socket, bends, elbow, tee,

nipples, unions, flanges etc. in all type of soils upto average 610 mm depth

and back filling earth well consolidated incl. Cutting threads, fixing,

painting with two coats of Shalitex Primer & Shalimar Tar plastic to a min.

thickness of 3 mm incl. the cost of paint complete as per our std. incl. swing

joints as required.50 dia above 20 M length

_______________________________________________________________________ 60 7007123 24 M

PIPE . S/L B CLASS IN CC/BI 75 MM (Meter)

PIPELINES AND FITTINGS: Supplying, laying, pressure testing @ 1.5 kg/cm2 'B' class

MS black heavy duty pipeline incl. Heavy duty forged MS fittings like socket, bends,

elbow, tee, nipples, unions, flanges etc. by cutting CC/Bitumen/WBM etc upto average

610 mm depth and back filling earth well consolidated and redoing the surface incl.

Cutting threads, fixing, painting with two coats of Shalitex Primer & Shalimar Tar

plastic to a min. thickness of 3 mm incl.the cost of paint complete as per our std.

75 dia_______________________________________________________________________



TRIAL PRINT OUT

Page 5 of 24



Amount in Words_______________________________________________________________________ 70 7007552 1 EA

TANK . . S/F 50 MM VENT HOOD (each)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Supplying and fitting 50mm vent hood for

U/G tank vent pipe comprising of 2 nos. 50mm elbows, 1 no. 50mm nipple with 2layers

of brass mesh of 11 mesh/linear cm as per our standards._______________________________________________________________________ 80 7007133 1 EA

PIPE . . S/F PV VALVE (each)

PIPELINES AND FITTINGS: Supplying & fixing of 50 mm dia PV valve on vent pipe of

Metalpower or approved make.(setting:10 In. pressure & 1 In. vacuum of water

column)._______________________________________________________________________ 90 7007572 2 EA

TANK . LOCKING ARRANGEMENT FILL LINE (each)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Supplying and fixing locking arrangement as

per the company's standard specifications Fill line_______________________________________________________________________ 100 7007573 2 EA

TANK . LOCKING ARRANGEMENT DIP PIPE (each)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Supplying and fixing locking arrangement as

per the company's standard specifications Dip pipe_______________________________________________________________________ 160 7007611 2 LS

TANK . BM CHAMBER 1X1X0.9M (Lumpsum)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Providing / constructing BM chamber for

tank Including plastering in c.m.1:4 and pcc 1:3:6 around the M/H bottom at complete.

manhole size 1 m x 1 m x 0.9 m ht._______________________________________________________________________ 170 7007612 4 LS

TANK . BM CHAMBER 0.6X0.6X0.9M (Lumpsum)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Providing / constructing BM chamber for

tank Including plastering in c.m.1:4 and pcc 1:3:6 around the M/H bottom at complete.

0.6 m x 0.6 m x 0.9 m for additional suction / Dip M/H_______________________________________________________________________ 180 7007317 900.000 KG

ROOF STEEL . SECTIONS (Kilogram)

ROOFING Supply/fabricating/erecting the Steel Section and in rolled steel sections

like R.S.J.; angles; Tees; channels etc and plates; square or rectangular rods.TATA

or SAIL make complete.including providing 2 coats of redoxide/zinc chromate pink

primer. (for less than ISA 50,locally available BIS certified sections to be used)_______________________________________________________________________ 190 7006944 2.000 M3






TRIAL PRINT OUT

Page 6 of 24



Amount in Words_______________________________________________________________________centering; shuttering; shoring scaffolding shall be done carefully without such shock









SOIL UPTO1.5 M_______________________________________________________________________ 210 7007632 10.000 M3



1:6_______________________________________________________________________ 220 7006169 20 M2



FLOOR TILE . NON SKID 7.5 Tk (Square meter)

FLOORING Providing and Fixing non-skid first quality ceramic tiles7.5mm of

SPARTEK/BELL/KAJARIA or of approved equivalent make in approved colour with cement

mortar bedding in flooring or skirting including filling of joints with white cement

mixed with colored pigment to match the tile colour._______________________________________________________________________ 260 7007564 1 EA

TANK . TRANSPORT TANK 20 DIST 1 TO 50 KM (each)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Transporting the 20KL tank with all

accessories including loading, unloading ( Octroi, taxes etc. if any) payable at

actual on production of document Distance 1 to 50 KM_______________________________________________________________________ 270 7007565 1 KM

TANK . TRANSPORT TANK 20 BEYOND 50 KM (Miles/Kms)

MECHANICAL - UNDERGROUND TANKS/PIPELINES Transporting the 20KL tank with all

accessories including loading, unloading ( Octroi, taxes etc. if any) payable at

actual on production of document Beyond 50 KM_______________________________________________________________________ 300 7007153 4 EA

PUMP . TRANSPORT DISTANCE 1-50 KM (each)

DISPENSING PUMPS Packing, loading, transporting and unloading of pump excl. Octroi/

taxes will be paid by production of actual document. Distance 1-50KM_______________________________________________________________________ 310 7007154 2 KM



TRIAL PRINT OUT

Page 7 of 24



Amount in Words_______________________________________________________________________PUMP . TRANSPORT BEYOND 50KM (Miles/Kms)

DISPENSING PUMPS Packing, loading, transporting and unloading of pump excl. Octroi/

taxes will be paid by production of actual document. Beyond 50KM_______________________________________________________________________ 320 7007141 4 EA

PUMP . INSTALLING MONO (each)

DISPENSING PUMPS Installing new pump on pedestal incl. providing and fixing

foundation bolts in CC 1:1.5:3 and connecting suction,electrical, earthing

connections. Mono Pump_______________________________________________________________________ 330 7007142 1 EA

PUMP . INSTALLING DUO (each)

DISPENSING PUMPS Installing new pump on pedestal incl. providing and fixing

foundation bolts in CC 1:1.5:3 and connecting suction,electrical, earthing

connections. DUO Pump_______________________________________________________________________00050 SALES BUILDING NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00050 covers the following services:

10 7006796 40.000 M3








SOIL UPTO1.5 M_______________________________________________________________________ 20 7006944 6.000 M3








1:6_______________________________________________________________________ 40 9001169 22.500 M3

Prov n Lay . Bldg Masonry SS 1:6 (Cubic meter)


Brick masonary work in CM 1:6 in superstructure using best quality, locally



TRIAL PRINT OUT

Page 8 of 24



Amount in Words_______________________________________________________________________available bricks with a compressive strength of min.75Kg/Sqcm including


directed- In super structure for all heights.

_______________________________________________________________________ 50 9002424 50 M2

Prov n Lay . Bldg Half Brick 75CM 1:4 (Square meter)


Half brick masonry work for partition wall in CM 1:4including stiffeners( 2

Nos, 6 mm dia full length @ every 4th course .

_______________________________________________________________________ 60 7006180 10.400 M2

BLDG PLASTER . 40TK DPC IN CC1:2:4 (Square meter)

Providing and laying 40mm thick DPC in CC 1:2:4 (1 Part of cement; 2 Part of sand

and 4 part of graded stone aggregate) upto 10mm nominal size laid in proper level

line; position as per drawing &a coat of Bitumen of graded 85/25 applied @ 1.7

kg/sq.m after cleaning the surface with brush & finally with a piece of cloth

lightly soaked in kerosene oil incl. cost of waterproofing material mixed in CC as

per manufacturer's spec. complete in all respect as directed by E.O._______________________________________________________________________ 70 7006949 6.000 M3

FOUNDN . RCC 1:2:4 mix (Cubic meter)

FOUNDATION; PLINTH; SUPERSTRUCTURE Providing and laying reinforced cement concrete

using reinforcement and 20mm metal incl. shuttering form work and curing for a period

of 14 days. Removing of centering, shuttering, shoring scaffolding shall be done

carefully without such shock or vibration as would damage the concrete in foundation;

lintel; plinth; column; beam ,slab etc.(excluding cost of reinforcement) 1:2:4 mix._______________________________________________________________________ 80 7006143 7.000 M3

BLDG RCC SLAB RFT PAID EXTRA 1:2:4 (Cubic meter)

Providing and laying RCC with reinforcement of specified quantity for slab using

20mm down metal incl. Centering, shuttering and curing for 21 days.(Reinforcement

will be paid separately) (b) 1:2:4 mix._______________________________________________________________________ 90 7006144 1,500.000 KG

BLDG RCC HYSD STEEL BARS (Kilogram)

Providing cold twisted HYSD steel bars of approved make of reputed concern for RCC

work including straightening, cutting, bending, binding and placing in position of

8mmand above dia and M.S. round bars dia._______________________________________________________________________ 100 7006166 50 M2

BLDG PLASTER IN CM 1:4 6MM THICK (Square meter)



TRIAL PRINT OUT

Page 9 of 24



Amount in Words_______________________________________________________________________ Cement plaster in CM 1:4 6mm thick_______________________________________________________________________ 110 7006169 180 M2





WATER PROOFING . . 100 TK MUD PHUSKA (Square meter)

WATER PROOFING Providing & laying 10 cm thick mud phuska of damped earth on roofs

laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with

phuska at 35 kg per cubic meter of earth and gobri leaping and covered with flat

brick tiles 22.5 x 11 cm x 4 cm of class 75 designation grouted with cement mortar

1:3 including pointing with cement mortar 1:3 and finished neat , also incuding the

painting top of roofs with bitumen 80/100 grade @ 1.7 kg per sq. before mud phuska

and impregnented with a coat of coarse sand @ 6 cm / per m2 area including the

cost of bitumen , cleaning the surface , T & P and all material labour etc.The

average thickness of complete water proofing would be 150 mm. The cost includes

preparation of 15 cm x 15 cm gola in 1:2:4 neeru finish, on the corners of parapet

wall & mud phusca and also the cost of making khurras of 450mm x450mm of requisite

nos. incld the cost of CI grating._______________________________________________________________________ 140 7007256 60 M2

DWAY . BKBATS 45 TO 80MM 150MM TK (Square meter)

ROAD WORK Supplying,spreading compacting 1st class brick bats/jhamas metal of size

45MM to 80 MM in hand crust to requisite thickness(measured after compaction)

including screening of bats/metals etc as necessary, hand packing ,sweeping watering

and rolling in stages with power roller to proper line, grade and camber lighting.

Guarding and barricading and making necessary earthen bund of 1 m width on each side,

where necessary to protect edges including cost of all meterial, complete. 150 mm

compacted thickness_______________________________________________________________________ 150 7006947 8.000 M3


FOUNDATION; PLINTH; SUPERSTRUCTURE Providing & laying cement concrete at all

height/depth using 20mm metal incl. necessary shutting form work & curing for a

period of 14 days Removing of centering ,shuttering, scaffolding shall be done

carefully without such shock or vibration as would damage the concrete in foundation

and or in plinth. 1:3:6 mix._______________________________________________________________________ 160 7006891 9 M2

FLOOR USING CC 1:2:4 . IPS 50 MM (Square meter)

FLOORING Providing and Laying IPS 50 mm thick in cement concrete1:2:4 mix for



TRIAL PRINT OUT

Page 10 of 24



Amount in Words_______________________________________________________________________flooring and dado including finishing the top in neat cement slurry and marking the

false square or as directed._______________________________________________________________________ 170 7006886 28.500 M2

FLOOR TILE . NON SKID 7.5 Tk (Square meter)

FLOORING Providing and Fixing non-skid first quality ceramic tiles7.5mm of

SPARTEK/BELL/KAJARIA or of approved equivalent make in approved colour with cement

mortar bedding in flooring or skirting including filling of joints with white cement

mixed with colored pigment to match the tile colour._______________________________________________________________________ 180 7006869 27 M2

FLOOR GLAZ TILE 5TK COLOR 300x300 (Square meter)

FLOORING Providing and fixing in flooring colored first quality glazed tiles 5 mm

thick of approved make LIKE BELL,KAJARIA,JOHNSONS,NAVEEN with cement mortar bedding

and filling of joint with white cement etc. complete over plastered surface. For size

300 x300mm_______________________________________________________________________ 190 7006908 32 M2

FLOOR . . 20 TO 22 MM CHEQUERE (Square meter)

FLOORING Supplying and fixing 20mm to 22mm thick checkered cement tiles in Grey/red

or yellow colour in bedding of cement mortar 1:4 mix._______________________________________________________________________ 200 7007942 7.000 M3

DWAY . PAVER BL DWAY . PAVER BL KERB (Cubic meter)

PROVIDING & FIXING PRECAST/PREFABRICATED KERB STONE IN ALL SHAPES & SIZES AS

APPROVED BY SITE INCHARGE OF 1:2:4 CEMENT CONCRETE AND FIXED WITH CEMENT

MORTAR 1:2 INCL. CENTERING & SHUTTERING ETC. AND FINISHED SMOOTH WITH 6 MM

CEMENT PLASTER 1:3 ETC. COMPLETE

_______________________________________________________________________ 210 7006292 20 M2

DOOR WIN FLOAT GLASS . 5.5MM TK (Square meter)

DOORS AND WINDOWS AND SHUTTERS Supplying; fitting fixing in position plain/frosted

float glass of Modi float or equivalent for glazed show window duly fixing with

metal/aluminium clamps/putty etc. complete as directed including transparent sealant

as required. 5.5 mm thick glass panel_______________________________________________________________________ 220 7006296 20 M2

DOOR WIN AL FRAM 101x45 60M POW COAT (Square meter)

DOORS AND WINDOWS AND SHUTTERS Providing and fixing frame work for fixed glass show

window out of aluminium section size 101 x 45mm x 2.10 mm with PVC beading & glazing

clip of 0.071 kg/M.( Jindal section or equivalent by weight) With 50 to 60 micron

powder coated aluminium_______________________________________________________________________ 230 7006300 3 M2

DOOR WIN AL FRAM OPENABLE 60M POW COAT (Square meter)



TRIAL PRINT OUT

Page 11 of 24



Amount in Words_______________________________________________________________________

DOORS AND WINDOWS AND SHUTTERS Fabricating openable type window section of Jindal

Casement window series 'B' or equivalent by weight .(a) Main frame Secno

8462(42mmx31mm,1.6mm thick) (b) shutter frame Sec No 8463 (42mmx31.2mm,1.6mm thk)( c

) 5mm thick clear float1 glass (d) clip Sec No 8461(28mmx15.3mm,1.6mmthk) (e) Mulion

Sec No 8464(46.2MMX42MM,1.6MMTHK) with handles, hinges and stoppers of anodized

aluminium sections.( Jindal sections or equivalent by weight) With 50 to 60 micron

powder coated aluminium_______________________________________________________________________ 240 7006312 12 M2

DOOR WIN PANEL & FR FUL AL 60M POWCOAT (Square meter)

DOORS AND WINDOWS AND SHUTTERS Fabricating erecting in position door frame using

fully panelled shutter of the following sections. (a) Door outer frame Sec No 4605.

(b) shutter bottom Sec No 4530 (c)Shutter top Sec No 4531 (d) shutter vertical Sec No

4504(e) lock rail Sec No 4621 (f) panels 10 gauge aluminum sheet (g) with anodized

aluminium hinges; handles on both sides; concealed vertical locks; openable from both

the sides and tower bolts. (if required) ( Jindal sections or equivalent by weight)

With 50 to 60 micron powder coated aluminium panelled shutter_______________________________________________________________________ 250 7006304 1.200 M2

DOOR WIN GL AND FR LOUVERED 60M POW COAT (Square meter)

DOORS AND WINDOWS AND SHUTTERS Providing and fixing louvered window of 100mm wide

5mm thick glass adjustable type for ventilation as per required size including

keeping opening for fixing exhaust fan if required. (Frame Sec No4605) ( Jindal

sections or equivalent by weight) With 50 to 60 micron powder coated aluminium_______________________________________________________________________ 260 7006341 2 EA

DOOR WIN . . FLOOR SPRING (each)

DOORS AND WINDOWS AND SHUTTERS Providing and fixing Floor spring of Everite or

equivalent make_______________________________________________________________________ 270 7006344 4 EA

DOOR WIN . . HYD DOOR CLOSER (each)

DOORS AND WINDOWS AND SHUTTERS Providing and fixing hydraulic door closer Everite or

equivalent_______________________________________________________________________00060 SANITARY WORK NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00060 covers the following services:

10 9002420 1 EA

CVL SEPTICK TANK . 15 USER (each)

Constructing 250mm thick brick masonry walls for septic tank as per standard

drawing for 15 users incl. excavation;sand filling; cement concrete

foundation; plastering (1:3CM) of internal walls with waterproofing

compound;plastering 1:4 CM external wall; on top and sides upto230mm below

finished formation ground level and also incl. CI manhole cover over septic



TRIAL PRINT OUT

Page 12 of 24



Amount in Words_______________________________________________________________________tank; inlet/ outlet chambers;3M long 75 mm dia PVC vent pipe with PVC

cover/fixed to the roof slope of the septic tank.

_______________________________________________________________________ 20 7007369 1 EA

SANITARY . . SOAK PIT 2.5DIA 3DEE (each)

SANITARY Construction of 2.5 m dia & 3m deep soak pit incl.with top slab as above .

Ref std drg for 50 persons usage._______________________________________________________________________ 30 7007344 30 RM




in the ground/in wall ,cutting, & testing etc. complete 100 mm_______________________________________________________________________ 40 7007343 10 RM




in the ground/in wall ,cutting, & testing etc. complete 75 MM_______________________________________________________________________ 50 7007342 10 RM




in the ground/in wall ,cutting, & testing etc. complete 50 mm_______________________________________________________________________ 60 7007347 15 RM

SANITARY . HD CI PIPE 100MM (RUNNING METER)

SANITARY Supplying & laying approved quality heavy duty CI pipe incl. Cost of

fittings, excavation, laying, backfilling, etc. complete 100 mm_______________________________________________________________________ 70 7007350 1 EA

SANITARY . . 100MM EARTHWARE GULL (each)

SANITARY Supplying and fixing earthware gully trap 100mm size with CI grating on top

incl. constructing suitable masonry chamber and plastering etc. complete._______________________________________________________________________ 80 7007351 4 EA

SANITARY . SCI NAHANI TRAP 75mm (each)

SANITARY Providing and fixing sand cast iron Nahani trap of self cleansing design

with sand cast iron or C.P. brass grating with or without vent arm; of the below

mentioned sizes for inlet and outlet; complete including cost of cutting and making

good the walls and floors wherever if required. 75mm_______________________________________________________________________ 90 7007396 2 EA

SANITARY . GATE VALVE 15 MM DIA (each)



TRIAL PRINT OUT

Page 13 of 24



Amount in Words_______________________________________________________________________ SANITARY Providing and fixing screwed gate valve with CI wheel of approved quality.

15 mm nominal bore_______________________________________________________________________ 100 7007392 1 EA

SANITARY . GATE VALVE 20MM DIA (each)

SANITARY Providing and fixing screwed gate valve with CI wheel of approved quality.


SANITARY . GATE VALVE 25MM DIA (each)

SANITARY Providing and fixing screwed gate valve with CI wheel of approved quality.


SANITARY . BRASS TOWEL RAILS 600MM LONG (each)

SANITARY P&F in position best Indian make 25 dia CP brass adjustable towel rails

fixed in with rawl plugs embedded in walls with CP brass screws complete in all

respect incl. Cutting &making good the walls etc. 600 mm long_______________________________________________________________________ 130 7007322 1 EA

SANITARY . WC ORISSA TYPE (each)

SANITARY Providing & fixing glazed Orissa Pattern W.C. pan (IndianType) of approved

colour & shade and of size 580 x 440mmconforming to IS 2556 (Part III) together with

glazed S/P trap as per IS 2556 (Part III); both of approved make & in selected

colour._______________________________________________________________________ 140 7007325 1 EA

SANITARY . WC PVC FLUSHING CI (each)

SANITARY Providing & fixing PVC low level flushing cistern of ISI mark; 10 lit

capacity; with CI brackets; 32 mm concealed PVC flush pipe brass ball cock with PVC

ball; 15 mm CP brass stop cock; 15mm PVC inlet connection; 15 mm PVC overflow pipe

including connection to water closet etc. complete._______________________________________________________________________ 150 7007332 2 EA

SANITARY . WASH BASIN COLOR 630x510 (each)

SANITARY Providing and fixing 630 x 510mm size white vitreous china wash basin of

CERA or other approved make & shade suitable for mounting on GI rag bolts with half

pedestal (pedestal fixed with screws). 32mm dia CP brass waste coupling of standard

pattern, 32mm dia. CP brass bottle trap and unions, 32mm dia PVC waste pipe, C.P.

brass chain with plug and 15mm CP brass pillar tap, CP brass stop tap with PVC

connection, complete._______________________________________________________________________ 160 7007337 1 EA

SANITARY . . MIRROR 600x450MM (each)

SANITARY Providing and fixing 600 x 450mm bevelled edge mirror of superior glass of

approved quality with 6mm thick asbestos cement sheet ground fixed to wooden cleats



TRIAL PRINT OUT

Page 14 of 24



Amount in Words_______________________________________________________________________with CP brass screws and washers complete as required._______________________________________________________________________ 170 7007449 1 EA

SANITARY . SINTEX TANKS 1000 ltrs. capac (each)

SANITARY Supplying and fixing Syntex/infra water tanks incl. cost of necessary

fittings for inflow/outflow/overflow of waterexcl. the cost of ladder. 1000 ltrs.

capacity_______________________________________________________________________ 180 7007428 6 EA

SANITARY . BRASS STOP COCK 12MM (each)

SANITARY Supplying and fixing heavy type CP brass stop cock (Esc or equiv.) 12 mm

size_______________________________________________________________________ 190 7007438 2 EA

SANITARY . BRASS BIB 12MM CROWN (each)

SANITARY Supplying and fixing heavy type CP brass bib cock (Essco or equiv.) 12 mm

size crown type_______________________________________________________________________ 200 8000581 2 EA

S/F of Urinalurinal (each)

Supply and fixing of Urinal "Parryware Magnum" or equivalent as approved

_______________________________________________________________________ 210 7007362 1 EA

SANITARY . . URINAL PARTITION (each)

SANITARY Providing and fixing Urinal partition of 1200x600x25mm thk cudappa stone

both sides polished incl fixing in wall etc complete._______________________________________________________________________ 220 7007411 50 RM

SANITARY . GI PIPELINE 25MM (RUNNING METER)

SANITARY Supplying and laying B class G.I. pipeline incl. cutting threading; testing

for water/air complete with fittings like couplings; tees; nipples and elbows incl.

the excavation/ backfilling the trench and also along the wall with the necessary

fittings : GST, TATA with R Brand fittings 25mm dia_______________________________________________________________________ 230 7007410 25 RM

SANITARY . GI PIPELINE 20 MM (RUNNING METER)


for water/air complete with fittings like couplings; tees; nipples and elbows incl.


fittings : GST, TATA with R Brand fittings 19mm dia_______________________________________________________________________ 240 7007409 50 RM

SANITARY . GI PIPELINE 12 MM (RUNNING METER)




TRIAL PRINT OUT

Page 15 of 24



Amount in Words_______________________________________________________________________for water/air complete with fittings like couplings; tees; nipples and elbows incl.


fittings : GST, TATA with R Brand fittings 12mm dia_______________________________________________________________________ 250 7007338 2 EA

SANITARY . . SOAP DISPENSER (each)

SANITARY Providing and fixing SS /CP Brass soap dispenser of superior quality._______________________________________________________________________00070 PAINTING WORK NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00070 covers the following services:

10 7007156 200 M2

PAINT WW . CEMENT PAINT 2 COATS (Square meter)

WHITE WASHING / PAINTING : Preparing surface and painting with cement paint of

Snowcem or approved make, shade and quality, in all heights of walls,ceiling, sun

shades fins etc. incl. providing scaffolding,cleaning, curing and supply of all

materials and labour complete. 2 coats_______________________________________________________________________ 20 7007162 108 M2

PAINT WW . OBD 2 COATS (Square meter)

WHITE WASHING / PAINTING : Preparing surface and painting with Oil Bound distemper

of approved make, shade and quality in all heights of walls,ceiling, sun sheds fins

etc. incl. providing scaffolding,cleaning, curing and supply of all materials and

labour complete. 2 coats_______________________________________________________________________00080 CULVERT & DRAINAGE NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00080 covers the following services:

10 7006796 52.000 M3








SOIL UPTO1.5 M_______________________________________________________________________ 20 7006944 5.500 M3






FOUNDN . RCC 1:2:4 mix (Cubic meter)

FOUNDATION; PLINTH; SUPERSTRUCTURE Providing and laying reinforced cement concrete



TRIAL PRINT OUT

Page 16 of 24



Amount in Words_______________________________________________________________________using reinforcement and 20mm metal incl. shuttering form work and curing for a period

of 14 days. Removing of centering, shuttering, shoring scaffolding shall be done

carefully without such shock or vibration as would damage the concrete in foundation;

lintel; plinth; column; beam ,slab etc.(excluding cost of reinforcement) 1:2:4 mix._______________________________________________________________________ 40 7006144 1,200.000 KG

BLDG RCC HYSD STEEL BARS (Kilogram)

Providing cold twisted HYSD steel bars of approved make of reputed concern for RCC

work including straightening, cutting, bending, binding and placing in position of

8mmand above dia and M.S. round bars dia._______________________________________________________________________ 70 7007378 2 EA

SANITARY . INSPECTION CHAMBER 600x750 (each)

SANITARY Constructing brick masonary inspection chamber sizes as given below upto

0.60 M average depth in cement mortar 1:6, cement concrete 1:3:6 75mm thick in

foundation, cement conc.1:2:4 50mm thick benching,12mm thick cement plaster 1:2 with

floating coat of 1mm thk. of neat cement,RCC 1:2:4 slab 100 mm thk CC toping 50mm

thk. size 600 x 750 mm_______________________________________________________________________ 80 7007379 1 EA






thk. size 750 x 750 mm_______________________________________________________________________00090 ELECTRICAL WORK NRO KAIMALGARH 30.11.2010_______________________________________________________________________ The item 00090 covers the following services:

10 7006440 10 EA

ELECTRICAL . S & F LIGHT POLE ½ Y Pole (each)

Supplying fabricating erecting light pole in CC 1:3:6 ,painting the pole with two

coats each of red oxide primer and approved make/shade/quality enamel paint complete

excluding cost of foundation. (Height will be considered from finished driveway level

) ½ Y Pole as per standard drawing_______________________________________________________________________ 20 7006446 10 EA

ELECTRICAL . LIGHTPOLE FOUN >5 TO 7M HT (each)

Erecting supplied light pole in CC 1:3:6 including excavating in all types of soil

as per our standard drg. and specification. upto 7mtr height_______________________________________________________________________ 30 7006449 10 EA

ELECTRICAL . LIGHTPOLE WIRE >5 TO 7M HT (each)

Providing wiring of light/emblem pole internally with 3/20 PVC insulated copper

wire of approved make and making necessary connections. upto 7 mtr height_______________________________________________________________________ 40 7006472 200 RM



TRIAL PRINT OUT

Page 17 of 24



Amount in Words_______________________________________________________________________ELECTRICAL CABLE TRENCH ORD SOIL (RUNNING METER)

CABLE LAYING Excavating trench 600mm deep, 450mm wide for laying cables,supplying

and Filling sand 75mm below the cable and brick protection on the top of the cable,

back Filling to original shape, disposing of the surplus earth to out side the

premises as follows In ordinary soil_______________________________________________________________________ 50 7006488 300 M

ELECTRICAL CABLE CU. CAB 3x1.5sq. mm (Meter)

CABLE LAYING Supply, laying, testing and commissioning of Cu. Conductor power cable

PVC insulated PVC sheathed. 1100 V grade armoured cable in existing PVC conduit on

walls / false ceiling /roof. Laid in cable tray with end termination's connections,

earthing etc. complete as required 3 x 1.5 sq. mm_______________________________________________________________________ 69 7006487 200 M

ELECTRICAL CABLE CU. CAB 2x1.5sq. mm (Meter)





ELECTRICAL CABLE CU. CAB 3x2.5sqmm (Meter)





ELECTRICAL CABLE CU. CAB 4x16 sq. mm (Meter)




earthing etc. complete as required 4 x16 sq. mm_______________________________________________________________________ 90 7006546 3 EA

ELECTRICAL CABLE FLP GLAND 3 x 2.5 sq. m (each)

CABLE LAYING Supplying flame proof double comp cable gland with adaptor if required

(Baliga make or equivalent approved) conforming to IS 2148 suitable for following

cable size : 3 x 2.5 sq. mm_______________________________________________________________________ 100 7006543 4 EA

ELECTRICAL CABLE FLP GLAND 3 x 1.5 sq. m (each)

CABLE LAYING Supplying flame proof double comp cable gland with adaptor if required

(Baliga make or equivalent approved) conforming to IS 2148 suitable for following

cable size : 3 x 1.5 sq. mm_______________________________________________________________________



TRIAL PRINT OUT

Page 18 of 24



Amount in Words_______________________________________________________________________ 109 7006560 6 EA

ELECTRICAL CABLE COMM GLAND 2 x 1.5 sq. (each)

CABLE LAYING Supplying approved make quality commercial typec able glands suitable

for following cable size : (Baliga or equivalent make) 2 x 1.5 sq. mm_______________________________________________________________________ 110 7006561 20 EA

ELECTRICAL CABLE COMM GLAND 3 x 1.5 sq. (each)


for following cable size : (Baliga or equivalent make) 3 x 1.5 sq. mm_______________________________________________________________________ 120 7006569 6 EA

ELECTRICAL CABLE COMM GLAND 4 x16 sq. mm (each)


for following cable size : (Baliga or equivalent make) 4 x16 sq. mm_______________________________________________________________________ 130 7006589 2 EA

ELECTRICAL EARTH . CU PLATE (each)

Supply, installation, testing and commissioning of Earthing station with copper

plate earth electrode with copper plate 600 x 600 x 3mm size and 3m deep filling with

alternate layers of charcoal and salt and connection arrangements with earth

strips,including watering arrangement.BM chamber with CI cover._______________________________________________________________________ 140 7006594 200 M

ELECTRICAL EARTH . 8 SWG CU Wire (Meter)

Supply and erection of GI/copper wire/strip for loop earthing in pipe/earth/walls

with connection etc. complete as required and of following size. 8 SWG Copper Wire_______________________________________________________________________ 150 7006591 200 M

ELECTRICAL EARTH . 8 SWG GI Wire (Meter)

Supply and erection of GI/copper wire/strip for loop earthing in pipe/earth/walls

with connection etc. complete as required and of following size. 8 SWG GI Wire_______________________________________________________________________ 160 7006597 1.000 M3

ELECTRICAL . . CONTROL PANEL MS PLA (Cubic meter)

Providing, fixing, testing & commissioning control panel of size as per plan and

details using 14 / 16 SWG M.S. Plate with double door including powder coating in

machine grey colour including arrangements to fix meters switch gears etc. according

to plan and detail incl. locking arrangements & handles etc. complete._______________________________________________________________________ 170 7006598 4 RM

ELECTRICAL . . CU BUSBAR 25X5 MM (RUNNING METER)

Providing and fixing copper busbar of size 25 mm X 5 mm_______________________________________________________________________ 180 7006601 1 EA

ELECTRICAL . DIGITAL AMMETER 0-100A (each)



TRIAL PRINT OUT

Page 19 of 24



Amount in Words_______________________________________________________________________ Providing and fixing phase digital type ammeter GEC make or equivalent incl

selector switch 0-100Amps_______________________________________________________________________ 190 7006604 1 EA

ELECTRICAL . VOLTMETER 0-500 V DIGITAL (each)

Providing and fixing 3 phase Digital type Voltmeter (0-500V) GEC make or equivalent

incl selector switch_______________________________________________________________________ 200 7006605 3 EA

ELECTRICAL . CT FOR AMMETER 150/5 0-100A (each)

Providing and fixing CT for ammeter. for 0-100Amps_______________________________________________________________________ 210 7006607 1 EA

ELECTRICAL . P&F Freq meter (each)

Providing and fixing the following 0-60Hz Frequency meter_______________________________________________________________________ 220 7006608 1 SET

ELECTRICAL . P&F RYB FUSES (set)

Providing and fixing the following Set of RYB phase indicating lamps transformer

type with slide fuses_______________________________________________________________________ 230 7006612 1 EA

ELECTRICAL . P&F 2.5/6 SQMM CU (each)

Providing and fixing the following Internal wiring for control panel in 2.5 Sq.mm &

6 sq.mm Cu. Special wire Fire proof / Flame proof of Polycab or equivalent approved

make including FLP lug etc. complete._______________________________________________________________________ 240 7006621 1 EA

ELECTRICAL . SFU HRC 100A TPN (each)

Providing fixing testing commissioning switch fuse unit with HRC FUSES including

connections complete. (L & T make) 100A TPN switch fuse unit_______________________________________________________________________ 250 7006630 3 EA

ELECTRICAL . CHANGEOVER SWITCH 63 Amp (each)

Providing and fixing testing, commissioning change over switch 63 Amp for provision

in electric panel_______________________________________________________________________ 260 7006649 10 EA

ELECTRICAL . MCB 1 PH 1 POLE 5 AMP (each)

Providing and fixing miniature circuit breaker [single phase single pole] of

approved quality and make confirming to IS 8828 for following ratings :(INDO KOPP,

HAGER, MDS) 5 AMP_______________________________________________________________________ 270 7006650 3 EA





TRIAL PRINT OUT

Page 20 of 24



Amount in Words_______________________________________________________________________approved quality and make confirming to IS 8828 for following ratings :(INDO KOPP,

HAGER, MDS) 15 AMP_______________________________________________________________________ 280 7006651 2 EA




HAGER, MDS) 32 AMP_______________________________________________________________________ 290 7006644 4 EA

ELECTRICAL . MCB SNGLE PH 5 AMP (each)

Providing and fixing miniature circuit breaker [single phase/double pole] of


HAGER, MDS) 5 AMP_______________________________________________________________________ 300 7006666 6 EA

ELECTRICAL . FIXTURES 1x40W light fixtu (each)

Supply, installation, testing and commissioning of prewired wall/ceiling/false

ceiling mounted type HPF fluorescent light fixtures including providing and fixing

tubes,chokes, starters, capacitors, earthing connections and mounting arrangements

etc. comp 1 x 40W similar to Philips light fixture No. TMC 18/140_______________________________________________________________________ 310 7006697 10 EA

ELECTRICAL . FITTINGS MH TO LIGHT POLE (each)

S/Fixing following fittings either of Philips,Crompton or GCE made incl. all

necessary arrangement to fix the same. Fixing the supplied metal halide/SV street

luminaires on yard lighting_______________________________________________________________________ 320 7006718 1 EA

ELECTRICAL . 3 PH VOLT STAB 15KVA (each)

Providing, installing & commissioning oil cooled unbalanced type 3 phase voltage

stabilizer ( range 160 v to 260 v ) incl over load trip relay of approved make

(Logicstat/Blue bird / Bhurji/ Kiranotics etc) incl cost of oil etc complete. 20kva_______________________________________________________________________ 330 7006726 20 EA

ELECTRICAL . . S/W LIGHT FAN POINTS (each)

Supply of material and wiring for light /fan point with 3/20 copper conductor, PVC

insulated 650 V grade ISI wires in heavy duty ISI 20 mm PVC conduit laid in existing

tray / on wall / in ceilings / floor complete with required plate swithches /

ceiling rose /_______________________________________________________________________ 340 7006727 10 EA

ELECTRICAL . . ONE LIGHT ONE SWITCH (each)

One light point controlled by one switch and wiring as above._______________________________________________________________________ 350 7006757 5 EA

ELECTRICAL . . P/F 15A PLUG 15A SWI (each)



TRIAL PRINT OUT

Page 21 of 24



Amount in Words_______________________________________________________________________

Providing and fixing 15A plug point with 4 Sq.mm single core copper conductor, PVC

insulated 650 V grade wires in heavy duty ISI 20 mm PVC conduit pipe laid in

existing tray / on walls with 5A / 15A socket of approved make like Anchor etc., 15A

plate switch complete._______________________________________________________________________ 360 7006764 300 RM

ELECTRICAL . HD PVC CONDUIT 25MM DIA (RUNNING METER)

Supplying and laying ISI heavy duty 6 kg/cm2 PVC conduit / pipe with accessories

and hardware complete as required. in wall / floors, ceilings, false ceilings etc

(Prakash / Triputi / Kishan etc.) PVC pipe 25 mm dia_______________________________________________________________________ 368 7006766 100 RM












(Prakash / Triputi / Kishan etc.) PVC pipe 100 mm dia_______________________________________________________________________ 380 7006774 1 EA

ELECTRICAL . S/D/F FOLL RUBBER MAT (each)

Supply,delivery & fixing of the following: Insulating rubber matting 6mm thk 11KV

grade size 1mx2m conforming to IS -5424/1969 to cover the front of main LT panel._______________________________________________________________________ 390 8000897 4 EA

ELE.POLYCARBONATE 98x98x61MM J.BOX. (each)

Supplying and fixing weather proof, waterproof, Polycarbonate junction boxes

made of DK thermoplastic polycerene with internally embeded gasket having

cable knockouts for cable entry with protection degree of IP 65 of sizes

98x98x61 mm of Hensal/Clipsal/Rittal/MECO make

_______________________________________________________________________ 400 8000926 3 EA

ELECTRICAL .TPN. MCB 64 AMP (each)



TRIAL PRINT OUT

Page 22 of 24



Amount in Words_______________________________________________________________________

Providing and fixing miniature circuit breaker TP+N [3 phase with neutral] of

approved quality and make confirming to IS 8828 for following ratings :(INDO

KOPP, Protec, MG, L&T, Havell) 64 AMP

_______________________________________________________________________ 410 7007376 6 EA






thk. size 450 x 450 mm_______________________________________________________________________ 420 7007377 6 EA






thk. size 600 x 600 mm_______________________________________________________________________ 440 8000997 10 EA

ELE.TPT.POLE/CANOP BEYOND.50 KM. (each)

Packing, loading, unloading with transportation of electrical yard or canopy

light fixtures equipment with care.beyond 50 Km

_______________________________________________________________________ 460 7006714 1 EA

ELECTRICAL . . S/F CVR CVT 0.5KVA (each)

Supply & fixing 0.5 kva CVR/CVT of standard make like Su-kam/Bhurji etc for MPD_______________________________________________________________________ 470 7006694 2 EA

ELECTRICAL . FITTINGS EXHAUST FANS (each)

S/Fixing following fittings either of Philips,Crompton or GCE made incl. all

necessary arrangement to fix the same. Supply, installation and commissioning of

exhaust fans suitable for use of 220/240V 50Hz single phase with frame gravity drop

louvers clamps etc. complete as required 450sweeps size._______________________________________________________________________ 480 7007317 450.000 KG

ROOF STEEL . SECTIONS (Kilogram)

ROOFING Supply/fabricating/erecting the Steel Section and in rolled steel sections

like R.S.J.; angles; Tees; channels etc and plates; square or rectangular rods.TATA

or SAIL make complete.including providing 2 coats of redoxide/zinc chromate pink

primer. (for less than ISA 50,locally available BIS certified sections to be used)_______________________________________________________________________



TRIAL PRINT OUT

Page 23 of 24

TERMS & CONDITIONS

Important Notice_______________________________________________________________________Sr.No Description_______________________________________________________________________ 001 Quotation received after due date will not be entertained

002 Your quotation must specify exact amount or percentage discount,

Excise, S.T., Charges, Transport, Packing & forwarding, Octroi, etc.

as applicable.

003 In case you are unable to quote, kindly send the quotation with a

regret for our records. Non-receipt of a regret will adversely

affect your vendor rating.

004 No quotation will be accepted without your rubber stamp and

signature.

005 Your quotation must be strictly in enclosed envelope

indicating Collective RFQ No., RFQ No. and due date.

006 For all future correspondences please mention the vendor code

Collective RFQ Number & RFQ Number.

007 Retention Money 10 % shall stand deducted from each and every

running bill submitted in the event of contract is awarded.

LIST OF ENCLOSURES



TRIAL PRINT OUT

Page 24 of 24