tentec hydraulic nuts - atlas copco · the hydraulic rams all tentec hydraulic nuts feature a...
TRANSCRIPT
TENTEC HYDRAULICNUTS
The worldwide standard for hydraulic nuts.
Hydraulic pressure is applied simultaneously to each Tentec Nut. All frictional factors connected with conventional bolt tightening methods are alleviated since Tentec Nuts apply a direct axial force to the bolt which generates a bolt elongation. This elongation/tension is perma-nently retained by means of the load retaining collar. Tentec Nuts have been designed to be as compact as possible, in order to allow adjacent fitment on as many applications as possible. In most cases they are designed to produce a residual bolt stress of 45000 lbs/In2 (310N/mm2) which is more than adequate for most bolted joint applications. As pressure is applied to the Tentec Nuts not only does the bolt elon-gate but also joint compression occurs. Since many applications incor-
BOLT TIGHTENING SOLUTIONSWe have many years experience of designing bespoke bolt tensioning tools for instances where standard hydraulic nuts are not suitable. Contact us for more information
TENTEC HYDRAULIC NUTSTYPE - BOTTOM COLLAR
TECHNICAL SPECIFICATIONS Maximum Working Pressure = 2275bar
Nut BodyDesigned with considerable allowable ram movement. Refer to column S below
Hydraulic ConnectionsUser configurable quick release connections.Side and top connections available
Hydraulic SealsProven seal technology ensures many 1000’s of tool pressure cycles
Load Collar
Threaded RamInterfaces with the load collar to
retain bolt load
porate some form of gasket, this joint compression can be substantial, in order to withstand this joint compression all Tentec Nuts are capable of considerable piston movement. This allows the Tentec Nuts, in most cases, the ability to tension a complete joint in only one pressurisation sequence, which can result in extremely high time savings.
O
Thread
H
Part No Thread Thread Part No Bolt Load O H S
Inch Inches Metric Metric kn Tons mm mm mm
BCHN:0875 7/8 M22 BCHN:0022 190 19.1 54 48 5
BCHN:1000 1" M24 BCHN:0024 205 20.6 57 44 5
BCHN:1125 1 1/8 M27 BCHN:0027 220 22.1 60 48 5
BCHN:1250 1 1/4 M33 BCHN:0033 265 26.6 67 51 5
BCHN:1375 1 3/8 M36 BCHN:0036 325 32.6 73 54 6
BCHN:1500 1 1/2 M39 BCHN:0039 373 37.5 78 56 6
BCHN:1625 1 5/8 M42 BCHN:0042 424 42.6 83 58 6
BCHN:1750 1 3/4 M45 BCHN:0045 445 44.6 86 60 6
BCHN:1875 1 7/8 M48 BCHN:0048 523 52.5 93 70 8
BCHN:2000 2 M52 BCHN:0052 629 63.1 102 71 8
BCHN:2250 2 1/4 M56 BCHN:0056 781 78.3 112 75 8
BCHN:2500 2 1/2 M64 BCHN:0064 941 94.4 124 86 8
BCHN:2750 2 3/4 M68 BCHN:0068 1042 104.5 131 90 8
BCHN:3000 3 M72 BCHN:0072 1246 125.1 144 94 10
BCHN:3250 3 1/4 M80 BCHN:0080 1607 161.3 159 104 10
BCHN:3500 3 1/2 M90 BCHN:0090 2027 203.4 176 114 10
BCHN:3750 3 3/4 M95 BCHN:0095 2160 216.7 182 118 10
BCHN:4000 4 M100 BCHN:0100 2466 247.5 200 124 15
BCHN:4500 4 1/2 M110 BCHN:0110 2814 282.4 215 136 15
BCHN:5000 5 M125 BCHN:0125 3820 383.4 244 148 15
BCHN:5500 5 1/2 M140 BCHN:0140 4954 497.1 272 164 15
BCHN:6000 6 M150 BCHN:0150 5655 567.5 290 176 15
TENTEC HYDRAULIC NUTSTYPE - TOP COLLAR
Maximum Working Pressure = 2275bar
Safety & ReliabilityIntegrated into the design of each hydraulic nut are enhanced safety
features including mechanisms to remove the hazard of over-stroking
the hydraulic rams All Tentec hydraulic nuts feature a mechanism
which directs oil flow away from the operator in the instance the ram
is over-stroked and exhausts oil harmlessly into the internal section
of the nut
Seal TechnologyOver the years Tentec has developed a class leading high pressure
seal technology. This innovative seal technology is industry proven
and offers many 1000’s of reliable and safe pressure cycles.
TECHNICAL SPECIFICATIONS
Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
Top Collar Hydraulic Nuts feature the same benefits as the Bottom Collar type Hydraulic Nuts. The Top Collar derivative is ideally used where the nut is sunk into a pocket or spot face. The load retaining collar is situated at the top of the hydraulic nut allowing for easy access by the user.
Nut BodyDesigned with considerable allowable ram movement.
Hydraulic ConnectionsUser configurable quick release connections.Side and top connections available
Hydraulic SealsProven seal technology ensures many 1000’s of tool pressure cycles
Load Collar Threaded Ram
Interfaces with the load collar to retain bolt load
Part No Thread Thread Part No O H Ram Stroke
Inch Inches Metric Metric kN Tons mm mm mm
TCHN:0875 7/8 M22 TCHN:0022 190 19.1 54 40 5
TCHN:1000 1 M24 TCHN:0024 205 20.6 57 44 5
TCHN:1125 1 1/8 M27 TCHN:0027 220 22.1 60 46 5
TCHN:1250 1 1/4 M33 TCHN:0033 265 26.6 67 48 5
TCHN:1375 1 3/8 M36 TCHN:0036 325 32.6 73 52 6
TCHN:1500 1 1/2 M39 TCHN:0039 373 37.5 78 56 6
TCHN:1625 1 5/8 M42 TCHN:0042 424 42.6 83 58 6
TCHN:1750 1 3/4 M45 TCHN:0045 445 44.6 86 60 6
TCHN:1875 1 7/8 M48 TCHN:0048 523 52.5 93 64 8
TCHN:2000 2 M52 TCHN:0052 629 63.1 102 72 8
TCHN:2250 2 1/4 M56 TCHN:0056 781 78.3 112 75 8
TCHN:2500 2 1/2 M64 TCHN:0064 941 94.4 124 81 8
TCHN:2750 2 3/4 M68 TCHN:0068 1042 104.5 131 89 8
TCHN:3000 3 M72 TCHN:0072 1246 125.1 144 96 10
TCHN:3250 3 1/4 M80 TCHN:0080 1607 161.3 159 104 10
TCHN:3500 3 1/2 M90 TCHN:0090 2027 203.4 176 114 10
TCHN:3750 3 3/4 M95 TCHN:0095 2160 216.7 182 117 10
TCHN:4000 4 M100 TCHN:0100 2466 247.5 200 126 15
TCHN:4500 4 1/2 M110 TCHN:0110 2814 282.4 215 138 15
TCHN:5000 5 M125 TCHN:0125 3820 383.4 244 150 15
TCHN:5500 5 1/2 M140 TCHN:0140 4954 497.1 272 168 15
TCHN:6000 6 M150 TCHN:0150 5655 567.5 290 174 15
Bolt Load
O
Thread
H
WHY USE HYDRAULIC NUTS?
TDR
195R
1 20
15:0
4 ©
201
5, A
tlas
Cop
co. A
ll rig
hts
rese
rved
.
ConsistentUsing multiple Hydraulic Nuts on a bolted joint gives a much
improved uniform bolt load across all bolts.
Axial Bolt LoadBolt load is applied axially to the bolt. Inconsistencies such
as friction, bending and lubricant are not a factor when using
Hydraulic Nuts. No torsional stresses are involved.
Fast TensioningMultiple Hydraulic Nuts offer aq uick and accurate method of
tightening a bolted joint.
AccurateBolt load is directly proportional to the pressure applied to the
Hydraulic Nut.
ISO 9001BS OHSAS 18001ISO 14001
COMMITTED TO SUSTAINABLE PRODUCTIVITY
www.bolttighteningsolutions.com
TENTEC BOLT TIGHTENING SOLUTIONS