terad ja lõikeriistad
DESCRIPTION
Terad ja lõikeriistadTRANSCRIPT
99
BLADES
Quality
Blades for Safety Knives
Snap Off Blades
Scraper Blades
Industrial Blades
P.98
P.100
P.101
P.102
P.102
100
92250
92116
92126 92129
692126 692129
92136 92139
92132
692136 692139
92216 92219
92212
692216 692219
92226 92229
692226 692229
92236 92239
692239
92406 92409
692406 692409
92306
692306
92416 92419
692416 692419
692137
Straight blades
STRAIGHT 50 mmLength 50 mm. Thickness 0.65 mm.
LONG STRAIGHT 60 mmLength 60 mm. Thickness 0.65 mm.
STRAIGHT SPECIAL 60 mmLength 60 mm. Thickness 0.65 mm.
Hooked blades
SMALL HOOKThickness 0.65 mm.
LARGE HOOKThickness 0.65 mm.
SUPER HOOKThickness 0.65 mm.
FOR CARPET & VINYL TRIMMERThickness 0.65 mm.
FOR HIGH-TECH TRIMMERThickness 0.65 mm
CONCAVEThickness 0.65 mm.
SUPER HOOK TITANIUMIce hardened steel titanium coated. 3 times more longlasting. Ideal for natural floorings (sisal, coco).
STRAIGHT «V-REX BLACK»Length 60 mm. Thickness 0.65 mm Extremely hard tempered
steel, black surface treatment. Long life.
QUALITY
TYPETITANIUM
100 Blades Safety Dispenser
QUALITY
TYPE
100 bladesSafety Dispenser
QUALITY
TYPE
100 Blades Safety DispenserCard with 10
blades
QUALITY
TYPE
100 Blades Safety DispenserPACK of 900
bladesCard with 10
blades
QUALITY
TYPE
100 Blades Safety DispenserDispenser of 900 bladesCard with 10 blades
QUALITY
TYPE
100 Blades Safety Dispenser
Card with 10 blades
QUALITY
TYPE
100 Blades Safety DispenserCard with 10
blades
QUALITY
TYPE
100 Blades Safety Dispenser
Card with 10 blades
QUALITY
TYPE
100 Blades Safety Dispenser
Card with 10 blades
QUALITY
TYPE
100 Blades Safety Dispenser
Card with 10 blades
QUALITY
TYPE
V-REX
BLACK10 blades
carded
101
692706
92600 92609
692600 692609
92700 92709
692700 692709
92750
92720
92809
692730
9 mm Cutter blades
18 mm Cutter blades
STANDARD 9 mmWidth 9 mm. Thickness 0.40 mm. 12 segments.
STANDARD 18 mmWidth 18 mm. Thickness 0.50 mm. 7 segments.
TAJIMA 18 mm RAZAR BLACK • More pointed sharpening angle for a better cutting finish. • Highly alloyed steel, best shelf life. Distributor of 10 blades. • Treatment of dark surface - for a better blade slide, - prevent glue adhesion - avoid oxidization.
18 mmWidth 18 mm. Thickness 0.50 mm. 14 segments.
THICK 18 mmWidth 18 mm. Thickness 0.65 mm. 7 segments.
HARD CUTTER 25 mmWidth 25 mm. Thickness 0.70 mm. 6 segments.
25 mm Cutter blades
MULTI HOOK 18 mmLength 18 mm. Thickness 0.5 mm. 3 segments.
Découverte 2010
QUALITY
TYPE
RAZAR
BLACK
10 blades carded
QUALITY
TYPE
100 Blades Safety Dispenser
Card with 10 blades
QUALITY
TYPE
100 Blades Safety DispenserCard with 10
blades
QUALITY
TYPE
100 Blades Safety Dispenser
QUALITY
TYPE
100 Blades Safety Dispenser
QUALITY
TYPE
Pack of 5 blades
QUALITY
TYPE
10 blades card
102
92520
1-92520
92560
1-92560
92515
1-92515
92510
1-92510
92525
92540
92530
92554
92000
92010
692010
92020
692050
Scraper blades
10 blades / dispenser.
Pack of 5 blades.
FOR SCRAPER - Standard 10 cmLength 102 mm. Width 14 mm. Thickness 0.45 mm.
FOR SCRAPER - Standard HD, 10 cm widthLength 102 mm. Width 18 mm. Thickness 0.65 mm.
FOR SCRAPER - Rounded angles 10 cmLength 102 mm. Width 14 mm. Thickness 0.45 mm.
FOR SCRAPER - with notches 10 cmLength 100 mm. Width 14 mm. Thickness 0.45 mm.
FOR WINDOW SCRAPERS 10 cmLength 102 mm. Width 18 mm. Thickness 0.30 mm.
FOR «BIG-SCRAPER» 12.7 cmLength 127 mm. Width 19 mm. Thickness 0.90 mm.
FOR «MEGA SCRAPERS» 20 cmLength 200 mm. Width 19 mm. Thickness 0.90 mm.
For «SCRAP LACANET» 15 cm and «VARIO SCRAPER»Length 150 mm. Width 18 mm. Thickness 1 mm.
Safety industrial blades
SQUARE ENDED RAZOR BLADESLength 38 mm.
TRAPEZE Patented modelLength 38 mm. Thickness 0.30 mm.
STRAIGHT SECURITY 70 mmLength 70 mm. Thickness 0.50 mm.
For 691045 safety knife
Loose packed
10 blades carded
100 Blades in Dispenser
10 blades carded
100 Blades in Dispenser
10 blades carded
100 Blades in Dispenser
10 blades carded
100 Blades in Dispenser
10 blades carded
5 blades carded
5 blades carded
10 blades carded
THIN THICK
THICKNESS 0.15 mm 0.30 mm
100 per box
50 per box
50 per blister
QUALITY REF
50 blades per pack
QUALITY
TYPE
Blister card (10 blades)
104
691180 91180
91195
91183
91075 91185
91280
FLOORING TOOLS CUTTING
Autolock cutters
AB - 9 mm Autolock cutter. Supplied with 2 extra quality spare blades in the handle. Blades snapper cap.
AB - 18 mm Autolock cutter. Supplied with 2 extra quality spare blades in the handle. Blades snapper cap.
18 mm «Classic» cutters
RP 3000 - 18 mm Autolock. Blades snapper cap. Supplied with 2 extra quality spare bladesin the handle.
Blister card Supplied loose
AB METAL - 18 mm Autolock professional cutter in zinc alloy.Blades snapper cap.Supplied with 1 blade in handle.
BEST SELLER
NE
W
!!
25 mm Cutters
«HARD CUTTER» - 25 mm Locking system by turning the knurl. Bi-material. Length: 170 mm. Uses blades 92809. Supplied in blister card.
FOR
PLASTERBOARDS
RP4000 - 18 mm Autolock cutter with metal fi n. Supplied with 2 spare blades.
FIN FOR MARKING FLOORCOVERING OR CARDBOARD BEFORE CUTTING
HEAVY DUTY LOCKING SYSTEM.
105
91060
91190 91200
91285 91255
91272 91273
Supplied with 5 blades in the cartridge.
FLOORING TOOLS CUTTING
Cutters
LC - 303 Universal cutter. Supplied with 2 spare blades in the handle. Blades snapper cap. Supplied in blister card.
LC - 521 Strong blocking system by turning the knurl. Supplied with 2 spare blades in the handle. Supplied in blister card.
LC - 520 Double blocking system. Heavy duty purpose. Supplied with 2 spare blades in the handle. Supplied in blister card.
Screw driver Openingpainting pots
Marking
AC - 521 Strong blocking system by turning the knurl. Supplied in blister card.
UP TO 25 KG
PRESSURE
LCM-500 - 18 mm Aluminium handle moulded with anti-slip elastomer. Shockproof and autolock. Supplied in blister card.
DC - 501 Strong blocking system by turning the knurl. Stainless steel blade guide reinforced at the end: can serve as a screwdriver. In the back, a hook can be used to trace the covering, cardboard, ... Supplied in blister card
NE
W
!!
NE
W
!!
DC - 561 Strong blocking system by turning the knurl. Stainless steel blade guide reinforced at the end. Can be used as a screwdriver. Ergonomic elastomer handle: better grip. Supplied with 2 spare blades in the handle. Supplied in blister card.
HEAVY DUTY
CUTTERS
- WITH FIN
- ALUMINIUM BODY
AUTOMATIC
BLADE LOADING
SUPPLIED WITH
RAZARBLACK BLADE
106
91210 91220
1 2 3
691000 691030
93420
93421
93422
93426
93427
93428
FLOORING TOOLS CUTTING
Automatic cutters
A metal blades loading magazine is located inside the cutters body. This may hold 5 to 6 blades.
Take the worn out blade from the front end of the cutter.
Pull the cursor all the way back to retrieve a new blade.
Push the cursor and the new blade is ready.
A 1000 R - 9 mm Autolock cutter. Aluminium body. Blades snapper cap. Supplied in blister card with 9 mm spare blades in the cartridge.
L 2000 P - 18 mm Locking system by turning the knurl. Blade s snapper supplied separetely. Supplied in blister card with 3 (18 mm) spare blades in the dispenser.
ALUMINIUM BODY
AUTOMATIC
BLADE
CHANGING
«Kicoupp»
KICOUPP Registered design. Made of fi ne polished aluminium. Special for butt joints. Supplied without blade in blister card. Uses blades 92000, 92010 and 92020.
«KICOUPP» WITH PROTECTED SOLE To cut coverings without damaging the support. Increases blades life. Supplied without bladein blister card.Uses blades 92040
and 92010.
Tile cutters
TILE CUTTER For rigid and soft PVC tiles, linoleum, rubber, etc. Aluminium structure.
30 cm Cutting width: 30 cm.
30 cm Spare upper blade
30 cm Spare base blade
61 cm Cutting width: 61 cm.
61 cm Spare upper blade
61 cm Spare base blade
107
91410
91400
91415
FLOORING TOOLS CUTTING
Trimmers
HIGH-TECH TRIMMER Patented model. Ideal tool for perfect and quick trimming of all kinds of fl oor coverings. The double adjustment of the cutter is achieved thanks to the double knurled knob: 1 - blades extraction, 2 - required tilt. It enables you to trim in both directions assuring a perfect cutting joint.
Angle adjustment by tilting, as shown on the pictures.
As shown on the drawings, small angle «A» is required for a perfect cut of a thick
fl oor covering and larger angle «B» is required for a thin one.
Uses blades 92416. Supplied with 2 blades,
bubble packed.
THICK FLOOR
COVERING
THIN FLOOR
COVERING
CARPET & VINYL TRIMMER Registered design. To easily trim thin fl oor covering. Uses blades 92406.
Supplied with 2 blades, packed in blister card.
INCLINE ANGLE ADJUSTMENT
BLADES IN - OUT
THE THINER FLOOR
COVERING IS THE MORE THE
STOPS HAVE TO BE
EXTRACTED AND INVERSELY
RUBIROM TRIMMER
Several working positions possible, left-right handed, pulling or pushing.
Cast aluminium. For trimming thin fl exible fl oor coverings. Uses blades: 92700 - 92720
or multi-hook cutter blades 92730.
N
EW !!
108
691101 91101
691130
691102 91102
91645
91155
691140
91140
91035
91100
FLOORING TOOLS CUTTING
Knives
PAINTED KNIFE
Made in zamak injected under pressure. High precision blades
holding device with safety studs.
Blister card Supplied loose
RETRACTABLE KNIFE Injected aluminium. 4 cutting positions. Supplied assembled with 1 straight blade. In blister card.
POLISHED KNIFE
Blister card Supplied loose
LINOLEUM KNIFE Made of chromium-stainless steel. Ergonomic elastomer handle. Length: 22 cm.
LONG KNIFE For cutting strips in standing position before fl oor covering removal with a stripper. Length: 1.30 m. Uses straight interchangeable blades 92116
and hooked trimmer blades 92400 and 92410.
Safety knives
Automatic retractable blade device avoiding cutting risks when blade slips.
SAFETY RETRACTABLE KNIFE Made of zamak, painted black. Supplied with a mounted long straight blade. Spare blades 92136 and 92139.
Blister card
Supplied loose
KIT «SAFETY CUT» Includes: 91045 91140 692050 92136
94896
Red paint fi nish. Supplied without blade.
Shiny fi nish. Supplied without blade.
V-REX SAFETY KNIFE Cast metal fi xed blade knife. Quick opening by simply turning the knurl.Supplied with 3 straight blades «V-REX Black». In blister card.
Closed
Open
NE
W
!!
109
91115
91150
91653
91652
91655
92105
91650
92040
FLOORING TOOLS CUTTING
Automatic knives
«TAUREX®» KNIFE it extremely comfortable to use. Can withstand up to 60 000 openings.
made possible. Once the new blade has been replaced,close and lock the knife. The «TAUREX» knife is ready for use.
any movement of the blade.
GENUINE DELPHIN KNIFE 91150 Blister packed81150 LooseGENUINE DELPHINE KNIFE.Made of cast aluminium.Fast opening. Supplied with holster
Specifi c knives
CIRCULAR CUTTER Diameter from 4 to 16 cm. Supplied with 2 blades. For repairing burnt or worn areas.
Spare blades Pack of 2.
LOOP PILE CUTTER For foam backed fl oor coverings. Supplied with 10 blades 92105.
Spare blades Pack of 10.
CARPET KNIFE For tufted carpets. Supplied with 10 blades 92040.
Spare blades. Pack of 10.
MAGNETIC LUG SECURING THE
BLADE
LOCKING PISTON
NONSLIP GRIP
OPENING
SPARE BLADES IN THE HOLSTER
KNURL
CHANGE YOUR BLADES
WITHIN 4 SECONDS
EASY
OPENING
PATENTED
111
91320
93870
91350
91340
91385
DroitierLongueur : 26 cm.
91380
93400
93405
93415
93410
UTI
LISATION
UTI
LISATION
91370
FLOORING TOOLS CUTTING
CARPET SHEARS High quality steel. Polished and chromium plated.«Nogent» quality. First quality product. NAPPING SHEARS
To cut off excess fi bres. Length: 150 mm.
OFFSET HANDLE SHEARS Suitable for cutting natural fl oor coverings. High grade steel. Polished and chromium plated. Length: 25 cm.
BENTHANDLE SHEARS Lacquered blades, chromium plated nib.
Right handed Length: 28 cm.
CONCAVE SHEARS Stainless steel blades. Plastic rings.Length: 27 cm. Higher sharpness.Remove and stock the excess of wall paper glue.
Shears for fl ooring
STAINLESS STEEL SHEARS Stainless steel blades. Plastic rings. Length: 26 cm.
Profi les Shears
DÉMULTIPLIÉE COVERSTRIP SHEARSVanadium chromiun plated steel. for cutting 10/10 st steel, 18/10 brass, 15/10 steel, 17/10 aluminium profi les
STANDARD AVIATION SNIPSEuropean superior qualitySpecial notch blade.For cutting 10/10 stainless steel 12/10 brass, and 17/10 aluminium coverstrips
MITRE SHEARS
STRAIGHT SHEARS
PURPOSE
Especially designed for cutting
effortless rounded coverstrips
without bending them.
PPURPOSE
For cutting
smoothedges grippers,
PVC profi les, Ceramic
PVC profi les.
PLURICOUP Polished stainless steel teeth blades 42 mm. Ergonomic handle. Length 165 mm. For cutting PVC profi les, underlay, cables diam. max. 10 mm...