terminology quiz click here to start centre bitcountersink bit counter bore bitspade bit what is the...
TRANSCRIPT
Terminology Quiz
Click here to start
Centre Bit Countersink Bit
Counter bore Bit Spade Bit
What is the correct name for the tool shown ?
What is the correct name for the tool shown ?
A Jack Plane A Combination Plane
A Rebate Plane A Moulding Plane
What is the correct definition of the word Ergonomics?
Relating to the enjoyment or study of beauty.Describes an object or a work of art that shows great beauty
The scientific study of people and their working conditions, especially done in order to improve effectiveness:
The study and recording of the physical properties of the human body
Which tool would be used to produce Knurling?
What is the correct name for the recess machined to allow the head of a bolt to sit below the surface of the
work piece?
Groove
Countersink
Counterbore
Chamfer
Fillet
Jointing Block Flat Pack Fixing
Knock Down Fixing Block joint
What is the generic name for this type of joint?
Jack Plane Combination Plane
Rebate Plane Compass Plane
What is the correct name for the tool shown ?
Jack Plane Combination Plane
Rebate Plane Compass Plane
What is the correct name for the tool shown ?
Groove
Rebate
Moulding
Chamfer
What is the correct name for the “Slope” on the edge of this kitchen worktop?
Fillet
Radius
Counter bore
Groove
Rebate
Moulding
Chamfer
What is the correct name for the “Slot” cut in the edge of this piece of wood?
Fillet
Radius
Knurling
Biscuit Cutter
Cordless Drill
Moulder
Router
What is the correct name for the power tool shown above?
Angle Grinder
Orbital Sander
Jigsaw
A Groove
A Rebate
A Moulding
A Chamfer
What is the correct name for the “shaping” along the edge of this piece of mahogany?
A Fillet
A Radius
A Curve
Fitted Furniture Flat Pack Furniture
Knock Down Furniture Boxed Furniture
What is the generic name for this type of Furniture?
On the diagram to the left indicate where a fillet has been added to increase the strength of the casting
When driving in nails or screws near the edge of a piece of wood it is a good Idea to pre-drill a hole to prevent the wood splitting. This is called a ?
A Countersink A Pilot Hole
A Counterbore A Fillet
Aesthetics
Shape
SizeProportion Pattern
Texture
Form
Symmetry
Which one of these areas would not be considered part of the field of Aesthetics
Colour
Weight
Groove
Rebate
Moulding
Chamfer
What is the correct name for the pattern being cut into this Centre Punch.
Fillet
Radius
Knurling
What is the correct definition of the word Anthropometrics?
Relating to the enjoyment or study of beauty.Describes an object or a work of art that shows great beauty
The scientific study of people and their working conditions, especially done in order to improve effectiveness:
The study and recording of the physical properties of the human body
Well Done
Quiz Completed
Wrong
Click here to try again