AXE Platform

1. On system Level 2 the AXE 105 structure is devided into:

b) APZ and APT

2. At system level 2 the AXE 106 System Strucutre is devided into

b) System Modules

3. The Resource Module Platform (RMP)a) models and coordinates common resources for the applications.

4. The Application Modules are used toa) model and implement application oriented functions.

5. A Radio Base Station is directly connected to the

c) BSC

6. A BSC (Base Station Controller) provides the connection betweena) MSC/VLR and RBS

7. Which command prints out the physical position of a magazine ?a) EXPOP

TEST 2 (CHAPTER 2)1. To remove a fault in AXE you have to performa) Maintenance activities.

2. In which Module of the Exchange Library are the cabling descriptions ?c) C-Module

3. The B-Module containsc) Operation and Maintenance Manuals

4. Which Submodule of the B-Module contains the CommandDescriptions ?c) none of the above

5. Most AXE commands havec) 5 letters

6. In a Logfile in FIOL/WinFiol/AXEUSE the following is logged:

b) all commands and responses from the AXE.

7. TMOS is connected to the IOG via

b) a X.25 link

TEST 3 (CHAPTER 3)1. Consider an RP-pair. What is the working principle called, by which theycontrol the EMs ?Load sharing

2. Give a definition of the term Extension Module !

a smallest hardware unit in the Exchange

3. How many EMs can be connected to an RP-pair ?

16 EMs

4. Which command lists the equipment (EMs) controled by an RP ?

EXEMP5. Which types of routes exist in AXE ? Name all three !

internal routeExternal routeS\w route6. Name one command to print out the connections of a device !EXDRP,EXDAP

7. What are the task of the TSMs and the SPMs in the Group Switch ?TSM------ speech store the sample SPM----- connect to the out going route of diff TSM or the same TSM

8. Is an SPM connected as EM ?NOPES

9. What has to be defined first, the SNT or the DIP ? SNT10. Which of the both is directly connected to the Group Switch, the SNT orthe DIP ? SNT

11. Is Size Alteration working on the Data Store or on the Program Store ofthe CP ? Data store

12. Explain the difference between Local and Global Size Alteration Events ?Local -----affect only one block @timeGlobal ----affect all the Data files

AXE 10 OPERATION HANDLING IN GSM

1. Which command is used to printout the Routing Case Data?a) ANRSP

2. What’s the meaning of the parameter ‘SP’ in the Routing Case DataTable?a) Sending Program

3. Which Analysis Table is first to be changed in case of implementing newCharging Data?Traiff Data table

4. What’s the meaning of the parameter ‘NSP’ in the Tariff Data Table?a) New Signalling Point

b) Number of Start pulse5. Which command is used to printout the B-Number Analysis Data?

c) ANBSP

6. What is the result of the Pre-Analysis of the B-number?a) Origin for B-Number Analysis

7. Which command is used to specify a Traffic Recording Time Schedule?TRTSI

8. What’s the meaning of MTP?c) Message Transfer Part

9. What information element is included in the Service Information Octet(SIO)?User Part

AXE 10 HARDWARE MAINTENANCE IN GSM

TEST 1 (CHAPTER 1)1. Which command is used for changing the parameters for BlockingSupervision on routes?

c) BLURC

2. How many Signalling Terminals are connected to each PCD-D?a) 4

3. Which of the following is an alarm tha can be generated by faults in thesignalling network?

c) Signalling Terminal Fault

4. Which AXE subsystem is responsible for handling trunk lines?

c) TSS

5. A C7/SS7 Signalling Terminal can be tested using command:

d) C7STI

TEST 2 (CHAPTER 2)1. Which of the following tests is performed before a call connection isestablished in the Group Switch?b) through connection test

2. Which alarms relate to errors in the Group Switch?

c) "Group Switch Traffic Restriction" & "Group Switch Fault"

3. Which command is used to initiate a test of units in the Group Switch?

c) GSTEI4. Which command gives is used to load supervision parameters for aReference Clock?a) NSDAC

5. Which alarm relates to supervision of PCM lines?a) Digital Path Supervision

TEST 3 (CHAPTER 3)1. The RP-Bus is the connection between

the RPH and the RPs.

2. The RP-Bus is devided intoa) branches..3. What is the principle called by which two twin RPs control the EMs ?

c) Load Sharing4. The EM-Bus leads from the RPs to

c) the EMs5. The repair command sequence for an RP is

c) REPRI - REMRI - RECRI

6. The repair command sequence for an EM fault isc) REPRI - REMRI - RECRI

7. Which of the following is true ?b) Duplication of RPDs is not possible

TEST 4 (CHAPTER 4)1. What functions are carried out by the standby node in the IOG?File back on vol,supervision of itself, execution itselfInterface b\w CP And enternal device

2. What is meant by node reconfiguration?

Process of reloading & self diagnosis3. Explain the following status and states of the SB Node:ISOLATED DIAGNOSING: testing after faultWORKING RELOADED :working in stdby node

4. Why should the BLSNI & BLSNE comands only be used when absolutelynecessary?When node block &

5. What is the purpose of the SPS Event Log ?

6. What is the command to print the state of a link?C7LTP,EXEP7. When is it necessary to separate a link?

8. What is the purpose of the statistics function in the IOG?

9. What is the purpose of heartbeat signaling?

10. In IOG11, how many ports are blocked if an RPU board is faulty?

TEST 5 (CHAPTER 5)1. The state of a CP-side that does not run programs is:a) SB-HA

2. The APZ 212 system actually has two processors in each CP-side. Theseare the_____________ and the _____________.a) Central Processor Unit Regional Processor Unit

3. Hardware Faults in the CP can be detected by:

c) both of the above

4. Which command initiates an after repair check (board has been changed)in the CP?a) RECCI

5. Which command is used for printing "Restart Information"?

c) SYRIP

6. Which command initiates a system restart?b) SYREI7. How many RPs can be connected to the RPB?

b) 32

8. Side comparing circuits are used for comparing the data processed in thetwo CP-sides. Where is this comparison performed?

c) in the SB-side

9. All ongoing normal calls will be immediately disconnected in case of a:

c) large restart

10. Which command would you use to connect the CPT function?

b) PTCOI