Cisco 642-902 Exam Demo

Implementing Cisco IP Routing (ROUTE)

For Complete real exam in just $39 go on http://www.testbells.com/642-902.html

QUESTION NO: 297

To configure 6to4 on a dual-stack edge router. Which three of the following are valid in 6to4

Tunneling configuration? (Choose three)

A. IPv4 Tunnel IP address

B. Tunnel mode (6to4)

C. Tunnel Keepalives

D. IPv4 Tunnel Destination

E. IPv4 Tunnel Source.

F. 6to4 IPv6 address (within 2002 /16)

Answer: B,E,F

QUESTION NO: 298

In EIGRP, when the IP default-network command is configured on a router, what is generated in

the router’s configuration?

A. A static route

B. A directly connected route

C. An EIGRP route

D. A default route

Answer: D

QUESTION NO: 299

Refer to the exhibit.

OSPF is running throughout the network and RIP is being redistributed into OSPF in R2. You

want to minimize the propagation of LSAs into and out of Area 1.

Which OSPF feature would be best to achieve this goal?

A. stub

B. totally stubby

C. NSSA

D. totally NSSA

Answer: D

QUESTION NO: 300

A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table

on RouterA. The following information is available from RouterA:

configuration:

router bgp 65001

network 10.0.0.0

neighbor 172.16.1.1 remote-as 65002

no auto-summary

routing table information:

show ip route | include 10

O 10.10.10.0/24 [110/11] via 192.168.1.1, 2d00h, Ethernet0/0

Why is this prefix not in the local BGP table?

A. This route is not a BGP learned route.

B. The network command is wrong.

C. The 172.16.1.1 neighbor is down.

D. The prefix 10.10.10.0/24 is not a 'connected' route.

Answer: B

QUESTION NO: 301

Refer to the exhibit.

Which router configuration command can be given that will restrict router RTB from sharing its

routing information with router RTA?

A. the eigrp stub command on router RTA

B. the eigrp stub command on router RTB

C. the eigrp stub connected command on router RTA

D. the eigrp stub connected command on router RTB

E. the eigrp stub receive-only command on router RTA

F. the eigrp stub receive-only command on router RTB

Answer: F

QUESTION NO: 302

Given the above output, which statement is true?

A. 192.168.1.0 is a static route.

B. 192.168.1.0 is a summarized route.

C. 192.168.1.0 is a redistributed route into EIGRP.

D. 192.168.1.0 is equal path load balancing with 172.16.1.0.

Answer: C

QUESTION NO: 303

Which two types of routes will be advertised with the EIGRP configuration as shown?

(Choose two.)

router eigrp 100

eigrp stub

A. static

B. receive-only

C. summary

D. stub

E. connected

F. dynamic

Answer: C,E

QUESTION NO: 304

Refer to the exhibit.

What happens when the router stops receiving advertisements for the 10.1.2.0/24 network?

A. The summary route will be removed from the table.

B. The summary route will remain in the table.

C. The more specific routes will be advertised from the table.

D. 10.1.2.0/24 will still be advertised but packets destined for it will be dropped when they

reach this router.

Answer: B

QUESTION NO: 305

Refer to the exhibit. On all routers in the network, EIGRP has been configured for load

balancing across the three links. However, traffic destined for Network B from R1 is only load

balanced over paths R1-R2-R5 and R1-R3-R5. What is the cause of the problem?

A. EIGRP will not select more than two links for unequal cost path load balancing.

B. Because the path has a different link type, EIGRP will not select path R1-R4-R5 for load

balancing.

C. Because Router R4 is not a feasible successor, EIGRP will not select path R1-R4-R5 for load

balancing.

D. EIGRP will not select path R1-R4-R5 for load balancing unless the value of the variance

parameter is increased.

Answer: C

QUESTION NO: 306

Identify three characteristics of EIGRP feasible successors? (Choose three.)

A. A feasible successor is selected by comparing the advertised distance of a non-successor

route to the feasible distance of the best route.

B. If the advertised distance of the non-successor route is less than the feasible distance of best

route, then that route is identified as a feasible successor.

C. If the successor becomes unavailable, then the feasible successor can be used immediately

without recalculating for a lost route.

D. The feasible successor can be found in the routing table.

E. Traffic will be load balanced between feasible successors with the same advertised distance.

Answer: A,B,C

For Complete real exam in just $39 go on http://www.testbells.com/642-902.html