testing iso/iec 17025:2017 center (a govt. of india ... · 9921(part 4):: 1985 47...

TESTING LABORATORY, NSIC TECHNICAL SERVICECENTER (A GOVT. OF INDIA ENTERPRISE)

has been assessed and accredited in accordance with the standard

ISO/IEC 17025:2017''General Requirements for the Competence of Testing &

Calibration Laboratories''for its facilities at

JAPANIGATE, P.O. BALITIKURI, HOWRAH, WEST BENGAL, INDIA

in the field of

TESTINGCertificate Number: TC-5137

Issue Date: 26/12/2019 Valid Until: 25/12/2021

This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to continuedsatisfactory compliance to the above standard & the relevant requirements of NABL.

(To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org)

Signed for and on behalf of NABL

N. VenkateswaranChief Executive Officer

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

Permanent Facility

1 CHEMICAL- METALS& ALLOYS

Alluminium & its Alloy Silicon IS 504 (PART 1/SEC7): 2002


Aluminium & its Alloy Copper IS 504(PART 3/SEC 6):2002


Aluminium & its Alloy Manganese IS 504 (PART 5): 2002


Aluminium & its Alloy Tin IS 11035: 1984


Aluminium & its alloys Titanium IS 11035: 1984


Aluminium & its alloys Copper IS 11035: 1984


Aluminium & its Alloys Iron IS 11035: 1984


Aluminium & its Alloys Magnesium IS 11035: 1984


Aluminium & its Alloys Manganese IS 11035: 1984


Aluminium & its alloys Nickel IS 11035: 1984


Aluminium & its alloys Silicon IS 11035: 1984


Aluminium & its alloys Zinc IS 11035: 1984


Aluminium and its alloy Iron IS 504(PART 2/SEC 6):2002

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name TESTING LABORATORY, NSIC TECHNICAL SERVICE CENTER (A GOVT. OF INDIAENTERPRISE), JAPANIGATE, P.O. BALITIKURI, HOWRAH, WEST BENGAL, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-5137 Page No. : 1 / 89

Validity 26/12/2019 to 25/12/2021 Last Amended on -




Aluminium and its alloy Lead IS 11035: 1984


Aluminium and its alloys Chromium IS 11035: 1984


Carbon Steel Phosphorous IS 228 PART-3: 1987


Carbon Steel SULPHUR IS 228 (PART-9): 1987


Metal & Alloys Adhesion of Zinc Coated Steel IS 2629: 1985


Metals & Alloys Coating for Zinc Coated Steel IS 2633: 1986


Metals & Alloys Mass for Zinc Coating IS 6745: 1972


Plain Carbon Steel Carbon IS 228 (PART-1): 1987


Plain Carbon Steel Manganese IS 228 PART-2: 1987


Plain Carbon Steel SILICON IS 228 (PART-8): 1987


Plain Carbon Steel & Alloy Steel Molybdenum IS 8811: 1998


Plain Carbon Steel & Alloy Steel Aluminium IS 8811: 1998


Plain Carbon Steel & Alloy Steel Carbon IS 8811: 1998









Plain Carbon Steel & Alloy Steel Copper IS 8811: 1998


Plain Carbon Steel & Alloy Steel Phosphorous IS 8811: 1998


Plain Carbon Steel & Alloys Steel Vanadium IS 8811: 1998


Plain Carbon Steel & Alloys Steel Chromium IS 8811: 1998


Plain Carbon Steel & Alloys Steel Manganese IS 8811: 1998


Plain Carbon Steel & Alloys Steel Silicon IS 8811: 1998


Plain Carbon Steel & Alloys Steel Sulphur IS 8811: 1998


Stainless Steel Aluminium (by EmissionSpectrometer)

IS 9879: 1998


Stainless Steel Carbon (by Emission Spectrometer) IS 9879: 1998


Stainless Steel Chromium (by EmissionSpectrometer)

IS 9879: 1998


Stainless Steel Copper (by Emission Spectrometer) IS 9879: 1998


Stainless Steel Manganese (by EmissionSpectrometer)

IS 9879: 1998


Stainless Steel Molybdenum (by EmissionSpectrometer)

IS 9879: 1998









Stainless Steel Nickel (by Emission Spectrometer) IS 9879: 1998


Stainless Steel Phosphorous (by EmissionSpectrometer)

IS 9879: 1998


Stainless Steel Silicon (by Emission Spectrometer) IS 9879 : 1998


Stainless Steel Sulphur (by Emission Spectrometer) IS 9879: 1998


Stainless Steel Vanadium (by EmissionSpectrometer)

IS 9879: 1998

45 ELECTRICAL-SWITCHGEAR &PROTECTIVEEQUIPMENT

Alternating current dis connector(isolators) & Earthing switches forvoltages above 1 kV (upto 33 kV)

Mechanical Endurance test IEC 62271-102: 2018



Mechanical Endurance Test (WithdrawnStandared)IS9921(Part 4):: 1985



Resistance of the main circuit bymV drop

(WithdrawnStandared)IS9921(Part 5): 1985




(WithdrawnStandared)IS 9921(Part 4): 1985










Resistance of the main Circuit bymV drop

(WithdrawnStandared)IS9921(Part 2): 1982



Temperature Rise Test IEC-60060-(Part-1)-2010:IS 2071-(Part-1):2016



Temperature Rise Test (WithdrawnStandared)IS9921(Part 2): 1985



Temperature Rise Test (WithdrawnStandared)IS 9921(Part 4): 1985



Temperature Rise Test (WithdrawnStandared)IS 9921(Part 2): 1982


Alternating current dis-connectors(Isolators) & Earthing Switches forvoltages above 1kV(Upto 33 kV)

Lightning Impulse IS 2071(Part-1) :2016(IEC-60060-1-2010): 2016



Lightning Impulse (WithdrawnStandard)IS 9921(Part2): 1982










Lightning Impulse (WithdrawnStandard)IS 9921(Part4): 1985



Power Frequency voltage withstand(Dry & Wet)

(WithdrawnStandard)IS 9921(Part-5): 1985




(WithdrawnStandard)IS 9921(Part4): 1985



Power Frequency voltagewithstand(Dry & Wet)

(WithdrawnStandard)IS 9921(Part-2): 1982



Power Frequency voltagewithstand(Dry & Wet)

IS 2071-1(IEC-60060-1-2010): 2016


Alternating current disconnectors(Isolators) & earthing switches forvoltages above 33 kV (Upto 420 kV)


(WithdrawnStandard)IS 9921 (Part4): 1985



Temperature Rise (WithdrawnStandard)IS 9921 (Part4) : 1985










Temperature Rise Test (WithdrawnStandard)IS 9921 (Part2) : 1982


Alternating Current Switches forvoltage above 1 kv (up to 33 kv)


IS/IEC 62271-102:2003




IS/IEC 62271-105:2002








(WithdrawnStandard)IS 9920(Part2) : 1988


Alternating Current Switches forVoltages above 1 kv (upto 33 kV)

Lightning Impulse IS /IEC 62271-105:2002



Lightning Impulse (WithdrawnStandard)IS 9920 (Part2): 1988










Lightning Impulse IS 2071-1 (IEC-60060-1-2010): 2016



Lightning Impulse (WithdrawnStandard)IS 9920 (Part4): 1985



Lightning Impulse IS /IEC 62271-102:2018



Mechanical Endurance (WithdrawnStandard)IS 9920(Part4): 1985



Power Frequency VoltageWithstand (Dry & Wet)





IS /IEC 62271-102:2003




IEC-60060-(Part-1):2010,IS 2071-(Part-1): 2016















IS /IEC 62271-105:2002



Temperature Rise (WithdrawnStandard)IS 9920 (Part4): 1985



Temperature Rise IS /IEC 62271-102:2003



Temperature Rise IS /IEC 62271-105:2002



Temperature Rise (WithdrawnStandard)IS 9920(Part2): 1988


Circuit Breaker (AC Metal enclosedSwitch Gear and Control)

Temperature Rise IEC : 62271-1(amendment 2011):2007










Wet Power Frequency VoltageWithstand

IEC : 62271-100(amendment 1:12):2008



Dry Power Frequency VoltageWithstand

IEC : 62271-200: 2011




IEC :62271-1: 2007




IEC :62271-100(amendment 1:12):2008



Lightning Impulse VoltageWithstand

IEC: 62271-100(amendment 1 :12):2008




IEC: 62271-200 : 2011




IEC 62271-1(amendment 2011):2007










Measurement of ContactResistance

IEC : 62271-100(amendment 1:12):2008




IEC :62271 -1: 2007




IEC : 62271-200: 2011



Temperature Rise IEC : 62271-100(amendment 1: 12):2008



Temperature Rise IEC : 62271-200 : 2011




IEC : 62271-200: 2011




IEC:62271 -1: 2008









High Voltage Fuse Explosion (DropOut & Cut Out HV Fuse) (Up to 33KV)

Temperature Rise IEC-60060-(Part-1):2010,IS 2071-(Part-1): 2016



Temperature Rise IS 9385(Part 1): 2018



Temperature Rise IS 9385 (Part 2) : 2018


High Voltage Fuses-Explosion(Drop out & Cut Out HV Fuse) (Upto33 KV)

Lightning Impulse IS 9385 (Part 1): 2018



Lightning Impulse IS 9385 (Part 2) : 2018



Lightning Impulse IEC 60282-1: 2009



Lightning Impulse IS 9385(Part 1): 2018










Lightning Impulse IEC-60060-(Part-1):2010,IS 2071-(Part-1): 2016




IS 9385(Part 1): 2018




IEC-60060-(Part-1):2010,IS 2071-(Part-1): 2016




IEC 60282-2: 2008




IS 9385(Part 2) : 2018


High-Voltage Switchgear andControlgear

Lightning Impulse IEC 62271-103: 2018


HV Switchgears and Controlgears Power Frequency Voltage test (dry& wet)

IEC 62271-103: 2011









Switches and Disconnectors Measurement of Contact resistance IEC 62271-103: 2011


Switches and Disconnectors Mechanical Endurance test IEC 62271-103: 2011


Switches and disconnectors Temperature Rise test IEC 62271-103: 2011

115 ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES

Wrought Al.Wire Resistance / Conductivity /Resistivity

IS 2067: 1975


Ceramic/Glass Insulator / String(upto 33 KV Grade)

Verification of axial and radialdisplacement

IEC 60383-1: 1993


"Composite Insulator (solid corewith polymeric housing)"

Brittle Fracture Resistance NTSC(H)/ELEC.TEST/SOP(POLYMER) / 01: 2019


AC Metal enclosed switch gearcontrol gear

Impulse Voltage (WithdrawnStandard)IS 3427 :1997










Impulse Voltage IEC 60298: 1990



Power Frequency VoltageWithstand

(WithdrawnStandard)IS 3427 :1997




IEC 60298: 1990



Temperature Rise (WithdrawnStandard)IS 3427:1997



Temperature Rise IEC 60298: 1990


ACSR/ACASR/AAAC Electrical Resistance/Resistivity IS 398 (Part 5) : 1992


ACSR/ACASR/AAAC Electrical Resistance/Resistivity IS 398 (Part 4): 1994









ACSR/ACASR/AAAC Electrical Resistance/Resistivity IEC 61089: 1993


ACSR/ACASR/AAAC Electrical Resistance/Resistivity BS 215 (Part 1 & Part2): 1970


ACSR/ACASR/AAAC Electrical Resistance/Resistivity IS 398 (Rart 1) : 1996


ACSR/ACASR/AAAC Electrical Resistance/Resistivity IS 398 (Part 2) : 1996


ACSR/ACASR/AAAC Electrical Resistance/Resistivity IS 398 (Part 3): 1976


Aluminium Alloy Redraw Wire Resistance / Conductivity/Resistivity

IS 9997: 1991


Cables and Accessories DC Resistance of Armour IS 7098-2: 2011









Cables and Accessories DC Resistance of Armour IS 10810 PT -42 : 1984


Cables and Accessories DC Resistance of Conductor IS 8130 : 2013


Cables and Accessories DC Resistance ofConductor/Armour

IS 10810 PT-5: 1984


Cables and Accessories Impulse IS 7098-Part-2 : 2011


Cables and Accessories Impulse . IS 10810 PT-47 :1984


Cables and Accessories Impulse IS 7098-2: 2011


Cables and Accessories Insulation resistance/volumeresistivity

IS 10810 PT-43 : 1984









Cables and Accessories Insulation resistance/volumeresistivity

IS 7098-PT-2: 2011


Cables and Accessories Power Frequency VoltageWithstand Test

IS 7098-PT-2: 2011


Cables and Accessories Power Frequency VoltageWithstand Test

IS 10810 PT-45 : 1984


Ceramic / Glass Insulator/String(Upto 33 KV Grade)

Lightning Impulse voltage withstand& flash over (Dry)

IS 731: 1971


Ceramic /Glass Insulator /String (Upto 33 KV Grade)

Lightning Impulse voltage withstand& Flash over (Dry)

IEC 60383-1: 1993


Ceramic /Glass Insulator String (Upto 33 KV Grade)


IS 2071-(Part-1): 2016




IEC 60060-1: 2010











ANSI C29.2: 1992


Ceramic/Glass Insulator (145 KVGrade)

Wet power frequency voltagewithstand

IS 731: 1971




(Withdrawn Standard)IS 2544: 1973



Wet Power Frequency voltagewithstand

IEC 60383-2: 1993



Wet Power Frequency Voltagewithstand

IEC-60383-1: 1993



Galvanizing (Uniformity of zinccoating)

IS 4318: 1993




IS 2633: 1986











Withdrawn Standard IS2544: 1973




ANSI C29.1: 1988




IS 731 : 1971




ANSI C29.2: 1992



Mechanical Performance Test(Successive cycle of loading/un-loading followed bymechanical/electromechanicalfailing)

IS 731 : 1971




IS 4318 : 1993











IEC 60575: 1977




ANSI C29.1: 1988




ANSI C29.2: 1992



Mechanical Strength Withdrawn Standard IS2544: 1973



Mechanical Test (24 Hrs) IS 731 (Brforeamendment 7): 1971



Residual Strength test (aftermechanical damaged of the di-electric)

ANSI C29.2: 1992










Residual Strength test (aftermechanical damaged of the di-electric)

IEC 60797: 1984


Ceramic/Glass Insulator /String (Upto 33 KV Grade)


IEC 60383-2: 1993


Ceramic/Glass Insulator /String(Upto 33 KV Grade)




Ceramic/Glass Insulator String (Upto 33 KV Grade)


ANSI C29.6: 1996


Ceramic/Glass Insulator String (Upto 33 KV Grade)


ANSI C29.1: 1988


Ceramic/Glass Insulator(145 KVGrade)

Dry Power Frequency voltagewithstand



Ceramic/Glass Insulator/String(Above 33 KV Grade, Upto 72.5 KV)

Dry Lightning Impulse Voltagewithstand (w/o Flashover )











Dry Lightning Impulse Voltagewithstand (w/o Flashover)

IEC-60383-1: 1993



Dry Lightning Impulse voltagewithstand (w/o Flashover)

IEC -60383-2: 1993



Dry Lightning Impulse VoltageWithstand(w/o Flashover)

IS 731: 1971







Mechanical Load IEC-60383-2: 1993



Mechanical Load IEC-60383-1: 1993



Wet Power frequency voltagewithstand

IEC-60383-1: 1993











IS 731: 1971



Wet power frequency voltagewithstand

IEC 60383-2: 1993



Wet Power Frequency voltagewithstand



Ceramic/Glass Insulator/String (Upto 33 KV Grade)

Dry Power Frequency Voltagewithstand & flashover

ANSI C29.3: 1986




IS 7421: 1988



Dry power frequency voltagewithstand & flashover

ANSI C29.4: 1989



Dry Power frequency voltagewithstand & flashover

IEC-60137: 2008










Dry Power Frequency voltagewithstand & flashover

IS 1445: 1977




ANSI C29.6: 1996



Dry Power frequency voltagewithstand & flashover

IEC-60168: 2001




ANSI C29.2: 1992




( Withdrawn Standard)IS 2099: 1986




IEC-60168: 2001



Dry Power frequency Voltagewithstand & flashover

IS 5621 : 1970











IS 2071-(Part-1): 2016




IS 7421 : 1988




IS 5300: 1969



Dry Power Frequency Voltagewithstand & Flashover

IEC 60383-1: 1993



Dry Power Frequency VoltageWithstand & Flashover





ANSI C29.1: 1988




IEC 60060-1: 2010











IEC -60137: 2008







Dry power frequency voltagewithstand & flashover

ANSI C29.7: 1996




IEC 60060-1: 2010



Electromechanical failing IS 731: 1971



Electromechanical failing IEC -60383-1: 1993



Electromechanical failing ANSI C29.1: 1988










Electromehanical failing ANSI C29.2: 1992



Lightning Impulse Voltage Wihstand& flashover (Dry)

ANSI C29.7: 1996



Lightning Impulse voltage withstand& flashover (Dry)




Lightning Impulse VoltageWithstand & flashover (Dry)

IEC-60168: 2001



Lightning Impulse Voltage withstand& flashover (Dry)

IEC-60137: 2008



Mechanical Failing Load IS 731 : 1971



Mechanical Failing Load IS 4318: 1993










Mechanical Failing Load IEC-60383-1: 1993



Mechanical Failing Load IEC-60168: 2001



Porosity IS 731 : 1971



Porosity ANSI C29.7: 1996



Porosity ANSI C.29.1: 1988



Porosity IEC -60383-1: 1993



Porosity IEC-60168: 2001










Porosity IS 5621: 1970


















Porosity Withdrawn Standard IS2544: 1973
















Temperature Cycle IEC -60383-1: 1993



Temperature Cycle IS 7421: 1988



Temperature Cycle IS 4318 : 1993






Temperature Cycle IEC 60168: 2001
















Temperature Cycle (Withdrawn Standard)IS 2544: 1973






Under Oil Puncture withstand ANSI C29.1: 1988



Under Oil Puncture Withstand ANSI C29.7: 1996
















Under Oil Puncture withstand IEC-60383-1: 1993



Under Oil Puncture withstand (Withdrawn Standard)IS 2544: 1973



Under Oil Puncture Withstand IS 731: 1971



Under Oil Puncture Withstand IS 1445 : 1977



Under Oil Puncture Withstand IEC-60168: 2001



Visible Discharge IS 731 : 1971










Visible Discharge (Withdrawn Standard)IS 2544: 1973



Wet Power frequency voltagewithstand

ANSI C29.7: 1996



Wet Power Frequency Voltagewithstand & flashover

IEC -60383-1: 1993




IEC-60060-1: 2010








IEC 60383-2: 1993



Wet Power Frequency VoltageWithstand & flashover

IS 731 : 1971











IS 2071-1: 2016




IS 4318: 1993




ANSI C29.1: 1988




IS 7421: 1988



Wet Power Frequency VoltageWithstand & Flashover




Wet Power Frequency Voltagewithstand & Flashover

ANSIC C29.3: 1986




IEC-60168: 2001











IS 1445: 1977




ANSI C29.2: 1992




IEC- 60137: 2008




IS 5300 : 1969




ANSI C29.6: 1996


CIRCUIT BREAKER HV TEST IS/IEC:60947(Part-2):2003


Circuit Breaker Temperature Rise IS/IEC:60947(Part-2):2003









CLAMPS AND CONNECTOR DC RESISTANCE IS 5561 : 2018


CLAMPS AND CONNECTOR TEMPERATURE RISE ANSI/NEMA CC-1:2009


CLAMPS AND CONNECTORS Temperature Rise IS 5561: 2018


Composit Insulator Water Diffusion test IEC 62217: 2012


Composite Insulator (solid core withpolymeric housing)

Assembled Core Load time test IEC 61109: 2008


Composite Insulator (Solid core withpolymeric housing)

Brittle Fracture resistance NTSC(H)/ELEC.TEST/SOP(POLYMER)/01:2019



Damage limit proof test & test oftightness of interface between endfitting and insulator housing

IEC 61109: 2008










Dry Power Frequency Voltage IEC 62217: 2012



Galvanizing IEC 60383-1: 1993



Galvanizing IEC 61109: 2008



Mechanical Load (Sample test &routine test only)

IEC 61109: 2008



Mechanical Load(Sample test &routine test only)

IEC 60383-1: 1993



Porosity / Dye Penetration test IEC 62217: 2012



Porosity/Dye Penetration Test IEC 61109: 2008









Composite Insulator (Solid core withpolymeric housing)

Wet Power Frequency IEC 60383-1: 1993


Composite Insulator , (Solid corewith polymeric housing)

Dry Lightning Impulse withstandvoltage

IEC 61109: 2008


Composite Insulator(Solid core withPolymeric housing)

Wet Power Frequency IEC 60383-1: 1993


Composite Insulators Water Diffusion test ANSI/NEMA C29.11:2012


Copper rod / bar Resistance / Conductivity /Resistivity

IS 191: 2007


Copper rod/bar Resistance / Conductivity /Resistivity

IS 613 : 2000


Copper Strip Resistance / Conductivity /Resistivity

IS 1897 : 2008









Copper Strip Resistance / Conductivity /Resistivity

IS 3635: 1966


CT PT COMBINED UNIT Dry Power Frequency voltagewithstand

IEC -61869-1 : 2007


CT PT COMBINED UNIT Inter-turn over voltage test IEC -61869-1 : 2007


CT PT COMBINED UNIT Inter-turn over voltage test IS 16227-4 : 2015


CT PT COMBINED UNIT Inter-turn over voltage test IEC -61869-4 : 2013


CT PT COMBINED UNIT Lightning Impulse voltage withstand IS 16227-4 : 2015


CT PT COMBINED UNIT Lightning Impulse voltage withstand IS 16227-1: 2015









CT PT COMBINED UNIT Lightning Impulse voltage withstand IEC -61869-1: 2007


CT PT COMBINED UNIT Lightning Impulse voltage withstand IEC -61869-4: 2013


CT PT combined unit rated knee point emf and excitingcurrent

IS : 16227 Pt 4: 2015


CT PT COMBINED UNIT Wet Power Frequency voltagewithstand

IS 16227-4 : 2015



IS 16227-1: 2016



IEC -61869-1 : 2007



IEC -61869-4: 2013









CT-PT Combined unit Dry Power Frequency voltagewithstand

IS 16227-4 : 2015


CT-PT Combined unit Dry Power Frequency voltagewithstand

IS 16227-1: 2016


CT-PT Combined unit Wet Power Frequency voltagewithstand

IEC -61869-4: 2013


Current Transformer (upto 33 kVgrade)

Determination of secondary wdg.Resistance

IS : 2705 –( Part- 1):1992




IEC -61869-1: 2007




IEC -61869-2 : 2012




IS 16227-1: 2016











IS 16227-2: 2016



Test for rated knee point emf andexciting current at rated knee pointemf.

IEC -61869-1: 2007




IS : 2705 – (Part-1) :1992




IS 16227-2: 2016




IEC -61869-2: 2012




IS 16227-1: 2016



Verification of marking IEC -61869-2: 2012










Verification of marking IS 16227-2: 2016



Verification of marking IEC -61869-1: 2007



Verification of marking IS : 2705 – (Part-1):1992



Verification of marking IS 16227-1: 2016


Current Transformer (Up to 33 KVGrade

Temperature Rise (Withdrawn Standard)IS 2705 (Part 4): 1992


Current Transformer (Up to 33 KVGrade)


IEC-61869-2: 2012




IS 16227 : (Part 2):2016











IS 16227: (Part 1) :2016




IS 16227 : (Part 2):2016




IS 2705 (Part 1) (RA2012): 1992




IS 2071-1: 2016




IEC 60060-1: 2010




IS 16227: (Part 1) :2016




IEC -61869-1 : 2007











IEC 60060-1: 2010




IS 2071-1: 2016




IS 2705 (Part 1) : 1992




IEC -61869-1: 2007




IEC-61869-2: 2012



Temperature Rise IS 2705-1: 1992



Temperature Rise IS 2705-1: 1992










Temperature Rise IS 16227 : (Part 2):2016



Temperature Rise IEC -61869-1: 2007



Temperature Rise IEC-61869-2: 2012



Temperature Rise IS 16227: (Part 1):2016




IEC -61869-1: 2007




IEC 60060-1: 2010




IS 2705 (Part 1) : 1992











IS 2071-1: 2016




IS 16227: (Part 1):2016




IEC-61869-2: 2012




IS 16227 : (Part 2):2016


Distribution Box HV Test IS/IEC 60947(Part-1):2004


Distribution Box Temperature Rise IS/IEC 60947(Part-1):2004


Dry Power Frequency voltagewithstand

CT-PT Combined unit IEC -61869-1 : 2007









Earth Wire Electrical Resistance/Resistivity IS 12776 : 2002


EC Grade Al.Rod Resistance/Conductivity/Resistivity IS 5484 : 1997


Indoor Post Insulator of OrganicMaterials above 1 KV

Dry Lightning Impulse withstandvoltage

IEC 60383-1: 1993




IS 9431 : 1979




IS 2071 (Part-1): 2016




IEC :60060-1: 2010



Lightning Impulse Puncture IS 2071 (Part-1): 2016










Lightning Impulse Puncture IEC:60060-1: 1989



Lightning Impulse Puncture IS 9431: 1979



Lightning Impulse voltage withstand& flashover

IEC: 60060-1: 1989




IS 9431 : 1979




IS 2071 (Part-1): 2016



Mechanical Strength IS 9431 : 1979



Wet Power Frequency IEC 61109: 2008









Insulated Cable Accessories Electrical Aging Test NFC 33020: 1998


Insulated Cable Accessories Electrical Aging Test NFC 33004: 1998


Insulated Cable Accessories Electrical Aging Test EN 50483-5: 2011


Insulated Cable Accessories Electrical Continuity Test NFC 33020 and NFC33021: 1998


Insulated Cable Accessories Endurance Test under Mechanicaland Thermal Stress

NFC 33041: 1998


Insulated Cable Accessories Mechanical Test NFC 33020 , NFC33041 , NFC 33040 ,NFC 33021: 1998


Insulated Cable Accessories Voltage Test NFC 33020 , NFC33041 , NFC 33040 &NFC 33021: 1998









Insulated Cable Accessories Water tightness test NFC 33020 , NFC33021 ,NFC 33040 &NFC 33041: 1998


Insulated Cable Accessories - DeadEnd Clamp/ Anchor Clamp

Dynamic Test under LowTemperature

NFC 33 041: 1998


Insulated Cable Accessories -Suspension Clamp

Dynamic Test at Low Temperature NFC 33040: 1998


Insulated Cable Accessories -Suspension Clamp

Endurance Test under Mechanicaland Thermal Stress

NFC 33040: 1998


Interconnecting Bus Bars for ACVoltage Up to 36 KV

Impulse Voltage IS 8084 : 1976



Insulation Resistance IS 8084: 1976




IS 8084 : 1976










Temperature Rise IS 8084: 1976


Low Carbon GS wire / formed wire Resistance / Conductivity /Resistivity

IS 12048: 1987


Low Carbon GS wire /formed wire Resistance / Conductivity /Resistivity

IS 3975: 1999


Low Carbon GS wire/formed wire Resistance / Conductivity /Resistivity

IS 10810-42 : 1984


Low voltage switchgear and controlgear assemblies (TTA & PTTA/Busbar trunking system)

Di-Electric Test IEC 60439-1 (RA2013): 1985



Di-Electric Test IEC 60439-2 (RA2013): 1987



Di-Electric test IS 8623 Part-1: 1993










Di-Electric Test IS 8623 Part-2: 1993



Temperature Rise IEC 61439-1: 2011



Temperature Rise IS 8623 Part 1: 1993



Temperature Rise IS 8623 Part-2: 1993



Temperature Rise IEC 61439-2: 2012


Metal Fitting / accessories forInsulator / Conductor/Earth Wiresfor O.H Lines

Electrical Resistance / resistivity /Conductivity

IS 12048 : 1987



Electrical Resistance/ resistivity /Conductivity

IS 2121 (Part-1) : 1981










Heating Cycle IS 2486(Part-1): 1993



Heating Cycle IS 2121 (Part-4) : 1991



Heating Cycle IS 2121 (Part-3) : 1992



Heating Cycle IS 61284 (Class AJoints Only), BS 3288Pt-1:1997: 1997



Heating Cycle IS 2121 (Part-2): 1981


Potential Transformer (Up to 33 KVGrade)


IEC-61869-3 : 2011




IEC-61869-1: 2007











IEC:60060-1: 2010




IS 2071 (Part-1) : 2016




(WithdrawnStandard)IS 3156 (Part1) : 1992



Lightning Impulse voltage withstand IS 2071 (Part-1) : 2016




IEC-61869-3 : 2011




IS-16227 (Part 3): 2015



Lightning Impulse voltage withstand IEC-61869-1: 2007










Lightning Impulse voltage withstand (WithdrawnStandard)IS 3156 (Part1) : 1992



Lightning Impulse voltage withstand IEC:60060-1: 2010




IS-16227 (Part-1): 2016



Temperature Rise IEC-61869-1: 2007



Temperature Rise IEC-61869-3 : 2011



Temperature Rise (WithdrawnStandard)IS 3156 (Part1) : 1992




IEC:60060-1: 2010











(WithdrawnStandard)IS 3156 (Part1) : 1992




IEC-61869-3 : 2011




IEC-61869-1: 2007




IS 2071 (Part-1) : 2016


Stockbridge Damper / SpacerDamper

Magnetic power loss IS 10162: 1982


Stockbridge Damper / SpacerDamper

Magnetic power loss IS 9708: 1993


Wrought Al.Wire Resistance / Conductivity /Resistivity

IS 3635 : 1966








425 MECHANICAL-MECHANICALPROPERTIES OFMETALS

(Cast iron , Structural Steel , SteelTube & Al & Al alloy Sheet & strip ,Deformed Steel Bars & Wires , MildSteel Wire , Wrought Al, Al AlloyWire , EC Grade Al Rod, Earth Wire, Power Connector , Barded WireGalvanized Stay Strand)

Bend IS 1599: 2012



Elongation% IS 1608 part 1: 2018



Ultimate Tensile Strength IS 1608-Part 1: 2018



Yield Strength IS 1608 -Part 1: 2018









(Mild Steel Wire , Wrought Al , AlAlloy Wire , EC Grade Al Rod ,Earth Wire , Power Connector)

Dimension Verification IS 739 : 1992



Dimension Verification IS 5584: 1997






Dimension Verification IS 1755: 1983






Freedom from Defects IS 739: 1992
















Freedom From Defects IS 5584: 1997



Freedom From Defects IS 5561 : 2018



Torsion IS 280 : 2006






Torsion IS 5561: 2018













Torsion IS 1755: 1993



Wrapping IS 5584: 1997



Wrapping IS 5561 : 2018









Wrapping IS 280: 2006


AA Conductor Breaking Load of All Individual Al.Wire

IS 398 (Part 1) : 1996









AA CONDUCTOR BREAKING LOAD OF ALLINDIVIDUAL AL. WIRES.

BS 215-1: 1970


AA CONDUCTOR BREAKING LOAD OF INDIVIDUALWIRES

ASTM B-524: 2011


AA Conductor Diameter of Individual Wire (Al.) IS 398 (Part 1): 1996


AA CONDUCTOR FREEDOM FROM DEFECT IEC 61089: 1991


AA Conductor Freedom from Defects IS 398 (Part 1) : 1996


AA CONDUCTOR Freedom from defects BS 215-1: 1970


AA Conductor Lay Ration IS 398 (Part 1) : 1996









AA CONDUCTOR MEASUREMENT OF DIA OFINDIVIDUAL WIRE(Al)

BS 215-1: 1970


AA CONDUCTOR MEASUREMENT OF DIA OFINDIVIDUAL WIRE(AL.)

IEC 61089: 1991


AA CONDUCTOR MEASUREMENT OF LAY RATIO BS 215-1: 1970


AA CONDUCTOR MEASUREMENT OF LAY RATIO ASTM B-524: 2011


AA CONDUCTOR WRAPPING TEST BS 215-1: 1970


AA CONDUCTOR WRAPPING TEST(AL.) ASTM B-524: 2011


AAA Conductors Breaking Load of All Individual Al.Wires.

IS 398 (Part 4) : 1994









AAA Conductors Diameter of Individual Wire (Al.) IS 398 (Part 4) : 1994


AAA Conductors Elongation IS 398 (Part 4): 1994


AAA Conductors Freedom From Defects IS 398 (Part 4) : 1994


AAA Conductors Lay Ratio IS 398 (Part 4) : 1994


AAAC CONDUCTOR FREEDOM FROM DEFECTS BS 3242: 1970


AAAC Conductor Measurement of Dia of IndividualWire(Al.)

ASTM B-399: 2010


ACSR Conductor Freedom from Defects IS 398 (Part 2): 1996









ACSR CONDUCTOR BREAKING LOAD OF ALLINDIVIDUAL AL./STEEL WIRE.

ASTM B-232: 2011



BS 215-2: 1970



ASTM B-711: 2005



SS 4240814: 1989


ACSR Conductor Diameter of Individual Wire (Al. &Steel)

IS 398 (Part 2): 1996


ACSR Conductor Diameter of Individual Wire (Al. &Steel)

IS 398 (Part 5) : 1992


ACSR CONDUCTOR DUCTILITY(ELONGATION/TORSION)

BS 215-2: 1970










ASTM B-232: 2011



SS 4240814: 1989



IEC 61089: 1991



ASTM B-711: 2005


ACSR CONDUCTOR Freedom from defect IEC 61089: 1991


ACSR CONDUCTOR Freedom from defect BS 215-2: 1970


ACSR CONDUCTOR Freedom from defect ASTM B-232: 2011









ACSR CONDUCTOR Freedom from defect SS 4240814: 1989


ACSR CONDUCTOR Freedom from defect ASTM B-711: 2005


ACSR Conductor Freedom from Defects IS 398 (Part 5) : 1992


ACSR CONDUCTOR Measurement of Dia. Of IndividualWire (Al. & Steel)

IEC 61089: 1991



ASTM B-711: 2005



BS-215-2: 1970



IEC 61089: 1991










ATM B-232: 2011



SS 4240814: 1989


ACSR CONDUCTOR MEASUREMENT OF LAY RATIO BS 215-2: 1970


ACSR CONDUCTOR MEASUREMENT OF LAY RATIO ASTM B-711: 2005


ACSR CONDUCTOR MEASUREMENT OF LAY RATIO IEC 61089: 1991


ACSR CONDUCTOR MEASUREMENT OF LAY RATIO SS 4240814: 1989


ACSR CONDUCTOR MEASUREMENT OF LAY RATIO ASTM B-232: 2011









ACSR CONDUCTOR STRESS -STRAIN ONCONDUCTOR

BS EN 50182: 2001


ACSR CONDUCTOR STRESS -STRAIN ON STEEL BS EN 50182: 2001


ACSR CONDUCTOR SURFACE CONDITION IEC 61089: 1991


ACSR CONDUCTOR SURFACE CONDITION BS 215-2: 1970


ACSR CONDUCTOR SURFACE CONDITION SS 4240814: 1989


ACSR CONDUCTOR SURFACE CONDITION ASTM B-711: 2005


ACSR CONDUCTOR SURFACE CONDITION ASTM B-232: 2011









ACSR CONDUCTOR ULTIMATE BREAKING LOAD BS 215-2: 1970


ACSR CONDUCTOR ULTIMATE BREAKING LOAD ASTM B-711: 2005


ACSR CONDUCTOR ULTIMATE BREAKING LOAD ASTM B-232: 2011


ACSR CONDUCTOR ULTIMATE BREAKING LOAD IEC 61089: 1991


ACSR CONDUCTOR WRAPPING(AL & STEEL) BS 215-2: 1970


ACSR CONDUCTOR WRAPPING(AL & STEEL) ASTM B-232: 2005


ACSR CONDUCTOR WRAPPING(AL & STEEL) ASTM B-711: 2005









ACSR CONDUCTOR WRAPPING(AL & STEEL) IEC 61089: 1991


ACSR Conductors Breaking Load of All IndividualAl./Steel Wire

IS 398 (Part 2) : 1996


ACSR Conductors Breaking Load of All IndividualAl.Steel Wire

IS 398 (Part 5) : 1992


ACSR Conductors Ductility (Elongation /Torsion) IS 398 (Part 5) : 1992


ACSR Conductors Ductility (Elongation/Torsion) IS 398 (Part 2) : 1996


ACSR Conductors Measurement of Lay Ration IS 398 (Part 2): 1996


ACSR Conductors Measurement of Lay Ration IS 398 (Part 5) : 1992









ACSR Conductors Stress -Strain on Steel Core IS 398 (Part 2): 1996


ACSR Conductors Stress-Strain on Conductor IS 398 (Part -2) : 1996


ACSR Conductors Surface Condition IS 398 (Part 5) : 1992


ACSR Conductors Surface Condition IS 398 (Part 2) : 1996


ACSR Conductors Ultimate Breaking Load IS 398 (Part 5): 1992


ACSR Conductors Ultimate Breaking Load IS 398 (Part 2): 1996


ACSR Conductors Wrapping (Al. & Steel) IS 398 (Part 2) : 1996









ACSR Conductors Wrapping (Al. & Steel) IS 398 (Part 5) : 1992


Cast iron , Structural Steel , SteelTube & Al & Al alloy Sheet & strip ,Deformed Steel Bars & Wires , MildSteel Wire , Wrought Al, Al AlloyWire , EC Grade Al Rod, Earth Wire, Power Connector , Barded WireGalvanized Stay Strand

Bend IS 1608 (Part-1): 2018


Cast iron , Structural Steel , SteelTube & Al & Al alloy Sheet & strip ,Deformed Steel Bars & Wires , MildSteel Wire , Wrought Al, Al AlloyWire , EC Grade Al Rod, Earth Wire, Power Connector , Barded WireGalvanized Stay Strand

Mass/Meter IS 1608, Part 1: 2018


Cast iron, Structural Steel, SteelTube & Al & Al alloy Sheet & strip,Deformed Steel Bars & Wires, MildSteel Wire, Wrought Al, Al AlloyWire, EC Grade Al Rod, Earth Wire,Power Connector, Barded WireGalvanized Stay Strand

Elongation% IS 1599: 2012










Mass/Meter IS 1599: 2012



Ultimate Tensile Strength IS 1599: 2012



Yield Strength IS 1599: 2012


Chain Pulley Block Proof Load IS 3832 : 2005


Conductor and Earth WireAccessories

Bend IS 2121 (Part 1 ): 1981









CONDUCTOR AND EARTH WIREACCESSORIES

BEND BS 3288-1: 2014



BEND IEC 61284: 1997



Clamp Slip Strength IS 2121 (Part 1) : 1981



Clamp Slip Strength IS 2121 (Part 3): 1992



CLAMP SLIP STRENGTH IEC 61284: 1997



CLAMP SLIP STRENGTH BS 3288-1: 2014



Failing Load IS 2121 (Part 2): 1981










FAILING LOAD BS 3288-1: 2014



FAILING LOAD IEC 61284: 1997



Mechanical Strength IS 2121 (Part 3) : 1992



MECHANICAL STRENGTH BS 3288-1: 2014



MECHANICAL STRENGTH IEC 61284: 1997



Resilience BS 3288-1: 2014



RESILIENCE IEC 61284: 1997










Resilient IS 2121 (Part 1) : 1981



Tensile Strength IS 2121 (Part 1): 1981



TENSILE STRENGTH IEC 61284: 1997



TENSILE STRENGTH BS 3288-1: 2014



Verification of Dimension IS 2121 (Part 3) : 1992
















VERIFICATION OF DIMENSION IEC 61284: 1997



VERIFICATION OF DIMENSIONS BS 3288-2: 2014



Visual Examination IS 2121 (Part 3): 1992



Visual Examination IS 2121 (Part 2) : 1981



Visual Examination IS 2121 (Part 1 ) : 1981



VISUAL EXAMINATION BS 3288-2: 2014



Visual examination IEC 61284: 1997










Wrapping IS 2121 (Part 1): 1981



WRAPPING IEC 61284: 1997



WRAPPING BS 3288-1: 2014


Couplers Distortion IS 2750 : 1964


Couplers Slip BS EN74-1: 2005


Earth Wire Breaking Force IS 12776 : 2002


Earth Wire Diameter of Individual Wire IS 12776 : 2002









Galvanized Barbed Wire Dimension Verification IS 278: 2009


Galvanized Barbed Wire Ductility (Wrapping) IS 278: 2009


Galvanized Barbed Wire Freedom from Defects IS 278: 2009


Galvanized Barbed Wire Mass of Wire IS 278: 2009


Galvanized Stay Strand Diameter of Individual Wire IS 6594 : 2001













Galvanized Stay Strand Ductility(Torsion/Wrapping) IS 6594: 2001


Galvanized Stay Strand Ductility(Torsion/Wrapping) IS 1755 : 1983


Galvanized Stay Strand Ductility(Torsion/Wrapping) IS 2141: 2000


Galvanized Stay Strand Freedom From Defects IS 1755: 1983


Galvanized Stay Strand Freedom From Defects IS 2141 : 2000


Galvanized Stay Strand Freedom From Defects IS 6594 : 2001


Galvanized Stay Strand Lay Ratio IS 1755 : 1983









Galvanized Stay Strand Lay Ratio IS 2141: 2000


Galvanized Stay Strand Lay Ratio IS 6594: 2001


METAL FITTINGS OF INSULATOR DEFLECTION IEC 61284: 1997


METAL FITTINGS OF INSULATOR DEFLECTION BS 3288-1: 2014


METAL FITTINGS OF INSULATOR MECHANICAL STRENGTH BS 3288-1: 2014


METAL FITTINGS OF INSULATOR MECHANICAL STRENGTH IEC 61284: 1997


METAL FITTINGS OF INSULATOR SLIP STRENGTH IEC 61284: 1997









METAL FITTINGS OF INSULATOR SLIP STRENGTH BS 3288-1: 2014


METAL FITTINGS OF INSULATOR VISUAL EXAMINATION IEC 61284: 1997


Metal Fittings of Insulators Deflection IS 2486 (Part 1): 1993


Metal Fittings of Insulators Mechanical Strength IS 2486 (Part 1): 2013


Metal Fittings of Insulators Slip Strength IS 2486 (Part 1): 1993


Metal Fittings of Insulators Verification of Dimension IS 2486 (Part 2): 1989


METAL FITTINGS OFINSULATORS

VERIFICATION OF DIMENSION BS 3288-2: 2014










VERIFICATION OF DIMENSION IEC 61284: 1997


Metal Fittings of Insulators Visual Examination IS 2486 (Part 1) : 1993



VISUAL EXAMINATION BS 3288-1: 2014


Mild Steel Wire , Wrought Al , AlAlloy Wire , EC Grade Al Rod ,Earth Wire , Power Connector

Dimension Verification IS 1608 (Part-1): 2018


Mild Steel Wire, Wrought Al, Al AlloyWire, EC Grade Al Rod, Earth Wire,Power Connector

Freedom from Defects IS 1608 (Part 1): 2018



Torsion (Withdrawn Standard)IS 1608 : 2005



Wrapping (Withdrawn Standard)IS 1608 : 2005









Point Hook with Shank Proof Load IS 15560: 2005


Sluice Valve , Butterfly Valve ,Swing Check Type , Non ReturnValve

Hydraulic IS 14846: 2000



Hydraulic IS 13095: 1991



Hydraulic IS 5312 (Part 1): 2004



Verification of Dimension IS 5312 (Part-1) : 2004



Verification of Dimension IS 13095 : 1991


Sluice Valve , Butterfly Valve ,Swing Check Type , Non-ReturnValve

Verification of Dimension IS 14846 : 2000









SPACER DAMPER ASSEMBLY TORQUE TEST IS 10162: 1982


SPACER DAMPER ASSEMBLY TORQUE TEST IEC 61854: 1998


SPACER DAMPER CLAMP BOLT TORQUE TEST IEC 61854: 1998


SPACER DAMPER CLAMP BOLT TORQUE TEST IS 10162: 1982


SPACER DAMPER VERIFICATION OF DIMENSION IEC 61854: 1998


SPACER DAMPER VERIFICATION OF DIMENSION IS 10162: 1982


SPACER DAMPER VISUAL EXAMINATION IS 10162: 1982









SPACER DAMPER VISUAL EXAMINATION IEC 61854: 1998


Steel Wire Rope Breaking Force IS 2266: 2002


VIBRATION DAMPER CLAMP BOLT TORQUE TEST IEC 61897: 1998


VIBRATION DAMPER CLAMP BOLT TORQUE TEST IS 9708: 1993


VIBRATION DAMPER MASS PULL OFF IEC 61897: 1998


VIBRATION DAMPER MASS PULL OFF IS 9708: 1993


VIBRATION DAMPER VERIFICATION OF DIMENSION IEC 61897: 1998









VIBRATION DAMPER VERIFICATION OF DIMENSION IS 9708: 1993


VIBRATION DAMPER VISUAL EXAMINATION IEC 61897: 1998


VIBRATION DAMPER VISUAL EXAMINATION IS 9708: 1993






testing iso/iec 17025:2017 center (a govt. of india ... · 9921(part 4):: 1985 47...

Documents