textile spinning
DESCRIPTION
TRANSCRIPT
Prepared by TANVEER AHMED 1
TEXTILE SPINNING
Process Quality Control
11/8/2010
Prepared by TANVEER AHMED 2
TEXTILE SPINNINGThe process or processes used in the production of single yarns or of fabrics generated directly from polymer.
1. Yarn from Staple Fiber: The formation of a yarn by a combination of drawingor drafting and twisting prepared strands of fibers,
suchas roving.
2. Filament Yarn: In the spinning of manufactured filaments, fiber-forming substances in the plastic or molten state, or in solution, are forced through the fine orifices in a metallic plate called a spinneret, or jet, at a controlled rate. The solidified filaments are drawn-off by rotating rolls, orgodets, and wound onto bobbins or pirns. There are several methods of spinning manufactured. Dry, Gel, Wet, Melt, Reaction and Phase Separation Spinning.
11/8/2010
Prepared by TANVEER AHMED 3
Spinning Process Diagram
1. RAW MATERIAL
2. BLOW ROOM
3. CARDING
4. DRAWING
5. COMBING
6. FINISHING
7. ROVING
8. RING
9. WINDING
RAW MATERIAL
BLOW ROOM
CARDING
DRAWING
COMBING
FINISHING
ROVING
RING
WINDING
11/8/2010
Prepared by TANVEER AHMED 4
Quality of raw material can be defined in various terms, as we studies Garvin categories quality into various terms.
1. Transcendent (product is superior to all competing products in every
way possible.)
2. Product based
3. User based
4. Manufacturing based
5. Value based
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 5
Garvin Eight attributes for quality also can implies in textile
1. Performance of Material / Product / Process
2. Features
3. Reliability
4. Conformance
5. Durability
6. Serviceability
7. Aesthetic
8. Perceived quality
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 6
Quality Of Textile RAW MATERIAL
Textile raw material universally called Textile Fibers:
A unit of matter, either natural or manufactured, that forms the basic element of fabrics and other textile structures.
A fiber is characterized by having a length at least 100 times its diameter or width.
The term refers to units that can be spun into a yarn or made into a fabric by various methods including weaving, knitting, braiding, felting, and twisting.
The essential requirements for fibers to be spun into yarn include a length of at least 5 millimeters, flexibility, cohesiveness, and sufficient strength. Other important properties include elasticity, fineness, uniformity, durability, and luster.
11/8/2010
Prepared by TANVEER AHMED 7
Fiber used as raw material for textile fabrics, are divided
(1), Animal Fibers, as wool, hair, silk;
(2), Vegetable Fibers, as cotton, linen, jute, hemp, ramie,
etc.;
(3), Mineral Fibers, as asbestos; and
(4), Artificial Fibers, as glass, metal threads, various
artificial silks, etc.;
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 8
Quality control and Quality assurance for textile evaluated through Testing Process.
TEXTILE TESTING CAN BE DIVIDED INTO:
1- CHEMICAL TESTING
2- PHYSICAL TESTING
The textile engineer or technologist in the quality of a product by doing:
In –Process of Final Verification Visual Inspection Hand Appraisal Laboratory Testing and Quality ControlFor some tests, internationally recognized standards exist, such as : ASTM ISO ANSI AATCC etc.
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 9
TEXTILE Fiber Testing:
100% cotton samples in the form of bale or opened and cleaned material (card mat).
Measurements
Micronaire
• Maturity Index
• UHML – Upper Half Mean Length
• UI – Uniformity Index
• SFI – Short Fiber Index
• Fiber Strength in g/Tex
• Elongation
• Moisture Content
• Color (Reflectance Rd, Yellowness +b) & Color Grade (USDA Upland, Pima, or regional
customized color chart)
• Trash (% Area, Trash Count) & Trash Grade (USDA)
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 10
TEXTILE Fiber Testing:
100% cotton samples in the form of bale or opened and cleaned material (card mat).
Measurements
Micronaire (Micro Grams Per Inch)
Quality Of Textile RAW MATERIAL
Measured by relating airflow resistance to the specific surface of fibers.
1 -------------- 3.1 Very fine
3.1 -------------- 3.9 fine
4.0 -------------- 4.9 medium
Above 6 Coarser
11/8/2010
Prepared by TANVEER AHMED 11
TEXTILE Fiber Testing:
100% cotton samples in the form of bale or opened and cleaned material (card mat).
Measurements
• Maturity IndexThe cotton fibre consists of cell wall and lumen. The maturity index is dependent upon the thickness of this cell wall.
COTTON Fiber Cross-Section
cotton=15000/ Ne x Mic
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 12
TEXTILE Fiber Testing:
• Maturity Index
Quality Of Textile RAW MATERIAL
Maturity( Maturity Coefficient)
Lumen Width / Wall Thickness
Mature(less 0.7) Less than 1
Half Mature (0.7 to 0.9)
Less than 2 More than 1
Immature (0.9 above)
More than 2
11/8/2010
Prepared by TANVEER AHMED 13
TEXTILE Fiber Testing:
• UHML – Upper Half Mean LengthFiber length is described as "the average length of the longer one-half of the fibers (upper half mean length)" This measure is taken by scanning a "beard " of parallel fibers through a sensing region. The beard is formed from the fibers taken from the sample, clasped in a holding clamp and combed to align the fibers. Typical lengths of Upland cottons might range from 0.79 to 1.36in.
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 14
TEXTILE Fiber Testing:
• UHML – Upper Half Mean Length
Quality Of Textile RAW MATERIAL
11/8/2010
Prepared by TANVEER AHMED 15
TEXTILE Fiber Testing:
• UI – Uniformity IndexLength uniformity or uniformity ratio is determined as " a ratio between the mean length and the upper half mean length of the fibers and is expressed as a percentage“
with the Fibrogram. The span lengths at given percentages of fibres areusually measured; the 2.5% span length is considered to correlate with the classer's staple length. From the 50% span length and the 2.5% span length.
a uniformity index can be calculated:
Quality Of Textile RAW MATERIAL
LENGTH UNIFORMITY
UNIFORMITY INDEX [%]
Very High >85High 83-85Intermediate 80-82Low 77-79Very Low <77
11/8/2010
Prepared by TANVEER AHMED 16
QUALITY OF BLOW-ROOM
11/8/2010
Prepared by TANVEER AHMED 17
OBJECTIVES OF BLOW-ROOM Opening Cleaning Blending Mixing
2-BLOW-ROOM Processes
Cleaning eff = (trash in – trash in lap) x 100
Trash in raw cottonCount = wt/lenth => like 0.0013 for 14 oz/yd
11/8/2010
Prepared by TANVEER AHMED 18
2-BLOW-ROOM Processes
11/8/2010
Prepared by TANVEER AHMED 19
OBJECTIVES OF CARD
1. Opening
2.Cleaning
3.Leveling (Parallelization)
4.Sliver formation
3-CARDING Processes
11/8/2010
Prepared by TANVEER AHMED 20
3-CARDING Processes
11/8/2010
Prepared by TANVEER AHMED 21
3-CARDING Processes Cleaning EfficiencySliver Count variationNeps (small knots or tangled fiber)
Fiber Hooks
According to an investigation by Morton and Yen in Manchester, it can be assumed that of the fibres in the web:
more than 50% have trailing hooks
about 15% have leading hooks
about 15% have double hooks
and less than 20% of the fibres have no hooks. Such fibre hooks, which effectively convert longer fibres to short fibres, cannot be permitted in the yarn. 11/8/2010
Prepared by TANVEER AHMED 22
3-CARDING Processes
Reversal of the dispositions of hooks between the card and the comber.
C, card; D, sliver lap machine; E, ribbon lap machine; F, comber.
Reversal of the dispositions of hooks between the card and the ring spinning machine. H, roving frame
C, card;
GI, drawframe
GIl, drawframe IIH, roving frame
R, ring spinning machine
11/8/2010
Prepared by TANVEER AHMED 23
DRAWING PROCESSES
11/8/2010
Prepared by TANVEER AHMED 24
Drawing is an operation by which slivers are blended, doubled or leveled and by drafting reduced to proper sized sliver suitable of being fed to the simplex. Draw frame contributes less than 5% to the production cost of yam, however its influence on quality of yam. is significant. Draw frame process considerably influences the final product, as draw is last point of compensation for the elimination of errors produced by subsequent m/c.
4- Drawing Frame
IMPROVING EVENNESS
PARALLELIZATION
BLENDING
DUST REMOVAL
11/8/2010
Prepared by TANVEER AHMED 25
5- Drawing Finisher Frame
11/8/2010
Prepared by TANVEER AHMED 26
6- ROVING FRAME
A roving is a continuous fibrous strand drafted from a sliver and given cohesion by either inserting a small amount of twist or compacting the fibers with an oscillating apron. It is drafted and twisted to be spun into a yarn
FL-16, FL-100DRAFT RANGE = 7 TO 8
11/8/2010
Prepared by TANVEER AHMED 27
.
6- ROVING FRAME
11/8/2010
Prepared by TANVEER AHMED 28
7- RING FRAME
The ring spinning frame, commonly called the ring, is the conventional spinning system and it transforms the roving from the roving frame into spun yarn using the operations of:. Drawing. Twisting. Winding
11/8/2010
Prepared by TANVEER AHMED 29
7- RING FRAMEDeviation of count
Variation of strength
Count variation
Elongation
Twist variation
Remaining disturbing thick and thin places
Direction of yarn twist
Remaining foreign fibers
Evenness
11/8/2010
Prepared by TANVEER AHMED 30
7- RING FRAME
11/8/2010