tfp grooved mechanical-5

of 72 /72
Effective Date: April 16, 2007 Supersedes Price Book: Sept. 18, 2006 U. S. List Prices for Mechanical Grooved Products www.grinnell.com

Upload: others

Post on 26-Feb-2022

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: TFP Grooved Mechanical-5

Effective Date: April 16, 2007Supersedes Price Book: Sept. 18, 2006

U. S. List Pricesfor

Mechanical Grooved Products

www.grinnell.com

Page 2: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 2 –

Grinnell Mechanical Grooved ProductsSection 1 - Introduction

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

Tyco Fire & Building Products - Terms & Conditions

General Terms & Conditions

Sales by Tyco Fire & Building Products (“TFBP”) shall be subject to the terms and conditions of sale as stated below, which shall constitute the complete agreement between the parties and may not be altered or modified except in writing duly executed by each party. The parties agree there are no agreements between the parties, oral or written, with respect to the products sold hereunder (including any made or implied from past dealings) except as expressed herein. No terms and conditions stated in or attached to Buyer’s communications to Seller, including but not limited to Buyer’s purchase order, the terms of which are hereby rejected, are applicable to these terms and conditions in any way and are not to be considered Buyer’s exceptions to the provisions of these terms and conditions. Trade custom, trade usage and past performance are superseded by these terms and conditions and shall not be used to interpret these terms and conditions.

Price Terms

All prices and quotes are FOB point of shipment unless otherwise specified and are subject to change without notice. Prices do not include sales, use, excise or similar taxes or duties. Buyer shall pay all applicable taxes directly if the law permits or will reimburse Seller if it is required to pay them. Buyer will provide tax exemption certificates or evidence of tax payment on request.

Payment Terms

2.0% 10/30. Prompt pay discount of 2% allowed within 10 days of invoice date and due at 30 days. Delinquent payments are subject to 1.5% monthly service charge (18% annually) on unpaid balances; or if such rate is prohibited under applicable law, then at the maximum rate as is permissible. TFBP further reserves the right to reclaim goods, which may be in the Buyer’s possession in the event of Buyer’s breach of the payment terms. Seller reserves a purchase money security interest in each product shipped, which will be satisfied by payment in full. Seller has the right to file a copy of this document as a financing statement.

Minimum Billing

The Minimum Billing Policy is $50.00 per Order. The Minimum Billing amount does not apply to orders for service/repair parts.

Shipping & Freight

“Free Freight” terms will be provided on single orders having a net value of $6,000.00 or greater for shipment at one time to a single destination. Shipments of non-stock products or shipments of products made directly from outside vendors may be subject to additional freight charges

Shipments within the Continental U.S. and Canada will be at the sole discretion of TFBP. If the Buyer specifies an alternate route, the Buyer assumes total transportation expenses and will be charged the actual freight expense incurred.

Shipments to destinations other than the Continental U.S. and Canada will be subject to special handling, packaging, and freight charges and billed to the Buyer. Any duties, tariffs, or other expenses will be paid by the Buyer.

Unless specifically indicated in writing to the contrary, and acknowledged by TFBP, TFBP reserves the right to make partial shipments.

Shipping Date & Delivery

Shipping dates are estimates only and are not guaranteed. Seller will use every effort to make shipments as scheduled and may make partial shipments. Shipping date and delivery specified are subject to any priorities or allocations necessitated by Government orders or regulations, and time and manner of delivery are subject to any delay on the part of the Buyer(s) in supplying necessary data, or by any changes in data at the Buyer(s) insistence, and/or to delays caused by Acts of God, strikes, lock-outs, riots, war, breakdowns, priorities or embargoes, accidents, civil or military authority, shortages of labor, delay in suppliers (or supplies) of material, difficulty in obtaining raw material, and any other cause beyond TFBP’s reasonable control. Delay in delivery for any of the aforementioned causes shall proportionately extend the time of delivery hereunder. TFBP shall be compensated for any and all extra costs and expenses occasioned by delays attributable to the Buyer(s).

Under no circumstances will TFBP be responsible for or the Buyer(s) entitled to incidental and/or consequential damages arising out of or owing to any delays in delivery whatsoever or for causes beyond TFBP’s reasonable control.

Cancellation

No products may be returned without prior written approval of TFBP. Orders placed with and accepted by TFBP may not be canceled except upon TFBP’s written consent prior to shipment and Buyer’s acceptance of TFBP’s cancellation charges which shall protect TFBP against all costs and losses. TFBP reserves the right to cancel any sale hereunder without liability to Buyer (except for refund of monies already paid), if the manufacture or sale of the products is or becomes technically or economically impractical.

Special Orders

Special material orders and made-to-order products may not be cancelled unless agreed to by TFBP in writing, and upon agreement as to compensation for work already performed. Any special material, TFBP non-manufactured items, or items deemed to be nonstandard may not be cancelled.

Page 3: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 3 –

Grinnell Mechanical Grooved ProductsSection 1 - Introduction

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

Limited Warranty

Products manufactured by Tyco Fire & Building Products (TFBP) are warranted solely to the original Buyer for ten (10) years from date of shipment by TFBP. No warranty is given for products or components manufactured by companies not affiliated by ownership with TFBP or for products and components which have been subject to misuse, improper installation, corrosion, or which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protection Association, and/or the standards of any other Authorities Having Jurisdiction. Materials found by TFBP to be defective shall be either repaired or replaced, at TFBP’s sole option. TFBP neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. TFBP shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by the Buyer or Buyer’s representatives.

IN NO EVENT SHALL TFBP BE LIABLE, IN CONTRACT, TORT, STRICT LIABILITY OR UNDER ANY OTHER LEGAL THEORY, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR CHARGES, REGARDLESS OF WHETHER TFBP WAS INFORMED ABOUT THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENT SHALL TFBP’S LIABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE.

The foregoing warranty is made in lieu of any and all other warranties, express or implied, including warranties of merchantability and fitness for particular purpose.

This limited warranty sets forth the exclusive remedy for claims based on failure of or defect in products, materials or components, whether the claim is made in contract, tort, strict liability or any other legal theory.

This warranty will apply to the full extent permitted by law. The invalidity, in whole or part, of any portion of the warranty will not affect the remainder.

Product Information Obligations

Buyer agrees to review all appropriate technical, service, safety, warranty, and other information and materials that it receives from TFBP and will provide such information and materials to any of Buyer’s customers.

Indemnity and Insurance

Buyer agrees to defend, indemnify and hold TFBP (and its agents, representatives, employees, officers, related companies, successors and assigns) harmless from all claims, demands, actions, damages, and liabilities (including attorney’s fees and consequential and incidental damages) arising out of any injury (including death) to any person or damage to any property in any way connected with any act or omission of Buyer, its agents, employees, or subcontractors. Buyer agrees to maintain Workmen’s Compensation and Comprehensive General Liability insurance, including property damage coverage, in an amount and form satisfactory to TFBP. Upon request, Buyer agrees to provide TFBP with certificates evidencing that such insurance is being maintained.

Return Goods Policy

1.The request to return material must include the description of material, reason for return, customer order number and/or customer invoice number to enable the request to be processed. No materials may be returned without this information.

2.When the request is approved, a Return Authorization form will be completed and include a predetermined number for reference and advise where the material should be returned. The Return Authorization form will contain a Packing list copy which must accompany materials when they are returned. Return Authorizations are valid for 30 days only from date of issue.

3. No credit will be issued for returned materials without an approved Return Authorization.

4. Materials being returned due to order entry and/or shipping errors on the part of TFBP will be credited at full value providing the materials are returned within 30 days from the date of the original shipment.

5. Credit of the actual price paid will be issued for defective materials only after the material has been inspected and verified to contain a defect by TFBP.

6. A 25% restocking charge and/or a $10.00 minimum charge, whichever is greater, will be assessed on Mechanical Grooved Products for inspecting, handling and restocking the material, and the total credit will depend upon the resale value of the material. Returned freight will be at the customer’s expense.

7.Items purchased for resale by TFBP may be returned under the Manufacturer’s terms and conditions only. If the Manufacturer will not accept the materials, credit will not be issued by TFBP to the Buyer.

8. Special material orders and made-to-order products are non-returnable.

9. Credit will not be issued for discontinued items. Items no longer manufactured or items superseded by another model are defined as discontinued.

10. In order to receive consideration for credit, material must be returned less than 2 years from date of original invoice and of reasonable quantities.

11.To receive consideration for credit, material must be in resalable condition.

12. Material that has been approved for return must be packed in such a way as to prevent damage during shipment. The use of original packaging is preferred. Credit cannot be issued for materials damaged in transit due to improper packaging.

Claims

Claims by the Buyer for billing errors, part shipment, shortages, freight charges or allowances of any kind must be made within thirty (30) days from receipt of the material pursuant to the terms and conditions of sale.

Tyco Fire & Building Products - Terms & Conditions

Page 4: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 4 –

Grinnell Mechanical Grooved ProductsSection 1 - Introduction

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

Table of Contents

Section 1 - Introduction

Terms and Conditions 2 - 3

Table of Contents 4 - 5

Section 2 - Grooved Couplings and Fittings

#772 Rigid Coupling w/Grade "E" EPDM or Grade "T" Nitrile Gasket 6

#772 Rigid Coupling w/Grade "E" EPDM or Grade "T" Nitrile Tri-Seal Gasket 6

#772 Rigid Coupling w/Grade "L" Silicone Gasket 7

#772 Rigid Coupling w/Grade "O" Fluoroelastomer Gasket 7

#705 Flexible Coupling w/Grade "E" EPDM or Grade "T" Nitrile Gasket 8

#705 Flexible Coupling w/Grade "E" EPDM or Grade "T" Nitrile Tri-Seal Gasket 8

#705 Rigid Coupling w/Grade "L" Silicone Gasket 9

#705 Rigid Coupling w/Grade "O" Fluoroelastomer Gasket 9

#707 Heavy-Duty Flexible Coupling w/Grade "E" EPDM or Grade "T" Nitrile Gasket 10

#707 Heavy-Duty Flexible Coupling w/Grade "E" EPDM or Grade "T" Nitrile Tri-Seal Gasket 10

#707 Heavy-Duty Flexible Coupling w/Grade "L" Silicone or Grade "O" Fluoroelastomer Gasket 11

#716 Reducing Coupling w/Grade "E" EPDM or Grade "T" Nitrile Gasket 12

#71 Grooved Flange Adapter w/Grade "E" EPDM or Grade "T" Nitrile Gasket 12

#770 High Pressure Rigid Coupling w/Grade "E" EPDM or Grade "T" Nitrile Gasket 12

Replacement Gaskets - EPDM "E" Gaskets For #772, #770, #705, #707, 13

Replacement Gaskets - Nitrile "T" Gaskets For #772, #770, #705, #707 13

Replacement Tri-Seal Gaskets - EPDM "E" Gaskets For #772, #770, #705, #707 13

Replacement Tri-Seal Gaskets - Nitrile "T" Gaskets For #772, #770, #705, #707 13

Replacement Gaskets - Grade "L" Silicone Gasket For #772, #770, #705, #707 14

Replacement Gaskets - Grade "O" Fluoroelastomer Gasket For #772, #770, #705, #707 14

Replacement Gaskets - EPDM "E" Gaskets For #716 14

Replacement Gaskets - Nitrile "T" Gaskets For #716 14

#71 Flange Adapter Replacement - "E" EPDM Gasket 15

#71 Flange Adapter Replacement - "T" Nitrile Gasket 15

Coupling Nut & Bolt Kit 15

Pipe Tape Chrome Plated w/Grinnell Logo 15

Grinnell Gasket Lubricant 15

Grinnell Silicon Gasket Lubricant 15

#71 Nut, Bolt and Gasket Kit . . . . . 15

#71 Flange Washer Adapter 15

#210 Mechanical Grooved 90° Elbow, #310 LR 90° Elbow 16

#316 Reducing Base Support Elbow, Groove x Flange 16

#201 Mechanical Grooved 45° Elbow, #301 LR 45° Elbow 17

#312 Grooved 22

1

2

° Elbow 17

#313 Grooved 11

1

4

° Elbow 18

#310 Mechanical Grooved 90° LR Elbow18

#301 Mechanical Grooved 45° LR Elbow19

#219 Mechanical Grooved Tee19

#310 - 3D, #310 - 5D, #310 - 6D Long Radius 90 Elbow, Painted20

#306 - 3D, #306 - 5D, #306 - 6D, Long Radius 60 Elbow, Painted20

#301 -3D, #301 - 5D, #301 -6D, Long Radius 45 Elbow, Painted21

#303 - 3D #303 - 5D #303 - 6D Long Radius 30 Elbow Painted21

Page 5: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 5 –

Grinnell Mechanical Grooved ProductsSection 1 - Introduction

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

Section 2 - Grooved Couplings and Fittings

(cont.)

#260 Grooved Cap 36

#260 Grooved Cap w/

1

2

" Tap, 36

#260 Grooved Cap w/

3

4

" Tap, 36

#260 Grooved Cap w/ 1" Tap, 36

#341 Groove x Flange - Adapter 150#37

#342 Groove x Flange - Adapter 300#37

#397 Groove x Groove - Swaged Nipple38

#398 Groove x Male Thread - Swaged Nipple39

#399 Groove x Plain - Swaged Nipple40

Section 3 - Branch Outlets

#730 Threaded Mechanical Tee w/Grade “E” EPDM or Grade “T” Nitrile Gasket41

#730 Grooved Mechanical Tee w/Grade “E” EPDM or Grade “T” Nitrile Gasket42

#730 Threaded Mechanical Cross w/Grade “E” EPDM or Grade “T” Nitrile Gasket43

#730 Grooved Mechanical Cross w/Grade “E” EPDM or Grade “T” Nitrile Gasket44

#730 Replacement "E" EPDM Gasket45

#730 Replacement "T" Nitrile Gasket45

Section 4 - Valves

#B302 Grooved Butterfly Valve EPDM or Nitrile46

#B308 Grooved Butterfly Valve EPDM or Nitrile D.I. Nickle Plated, Gear Operator46

#B308 Grooved Butterfly Valve - Options46

#B8101 Low Profile Butterfly Valve with Lever Handle47

#BV835 Grooved Ball Valve - 1,000 PSI with Lever Handle47

#590 Grooved Check Valve EPDM or Nitrile47

Section 5 - Accessories

#S853 Grooved Wye Strainer48

#S855 Grooved Tee-Type Strainer48

#SD810 Groove x Flange - Suction Diffuser49

#CB800 WROT x WROT - Circuit Balancing Valve49

#CB800 Flange x Flange - Circuit Balancing Valve50

#CB800 Thread x Thread - Circuit Balancing Valve50

#CB800 Groove x Groove - Circuit Balancing Valve50

Section 6 - Grooved Copper System

#672 Rigid Couplings W/ Grade "EN" Tri-Seal Gasket & Replacement Gaskets51

#61 Flange Adapter W/ Grade "EN" EPDM Gasket and Phenolic Washer & Replacement Gaskets51

#610 Grooved 90° Elbow52

#601 Grooved 45° Elbow52

#619 Tees52

#660 Caps52

#650 Grooved Concentric Reducer53

#652 Grooved Reducer, Grooved X Wrot53

#621 Reducing Tee, Grooved x Grooved x Grooved53

#618 Reducing Tee, Grooved x Grooved x Wrot54

#407GG Dielectric Waterway Transition Fitting, Grooved x Grooved54

#407GT Clearflow Dielectric Waterway Groove X Thread54

#407T Clearflow Dielectric Waterway Male Thread X Male Thread54

Table of Contents

Page 6: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 6 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

#772 Rigid Couplingw/Grade "E" EPDM or Grade "T" Nitrile Gasket

NomSize

Painted Galvanized

Grade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

1

1

4

77213ES 77213TS $28.75 77213EGS 77213TGS $36.25

1

1

2

77215ES 77215TS $28.75 77215EGS 77215TGS $36.25

2 77220ES 77220TS $29.50 77220EGS 77220TGS $38.00

2

1

2

77225ES 77225TS $33.75 77225EGS 77225TGS $43.75

3 77230ES 77230TS $39.50 77230EGS 77230TGS $51.25

4 77240ES 77240TS $56.00 77240EGS 77240TGS $72.75

5 77250ES 77250TS $72.25 77250EGS 77250TGS $94.75

6 77260ES 77260TS $96.50 77260EGS 77260TGS $125.25

8 77280ES 77280TS $151.75 77280EGS 77280TGS $197.75

10 77210ES 77210TS $271.00 77210EGS 77210TGS $362.25

12 77212ES 77212TS $303.00 77212EGS 77212TGS $406.25

14 77214ES 77214TS $395.75 77214EGS 77214TGS $507.75

16 77216ES 77216TS $515.75 77216EGS 77216TGS $658.25

18 77218ES 77218TS $596.25 77218EGS 77218TGS $772.50

20 77221ES 77221TS $709.75 77221EGS 77221TGS $927.75

24 77224ES 77224TS $1,045.00 77224EGS 77224TGS $1,324.00

#772 Rigid Couplingw/Grade "E" EPDM or Grade "T" Nitrile Tri-Seal Gasket

NomSize

Painted Galvanized

Grade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

1

1

4

77213E3S 77213T3S $42.75 77213E3GS 77213T3GS $50.50

1

1

2

77215E3S 77215T3S $41.50 77215E3GS 77215T3GS $49.50

2 77220E3S 77220T3S $42.50 77220E3GS 77220T3GS $51.25

2

1

2

77225E3S 77225T3S $51.75 77225E3GS 77225T3GS $61.00

3 77230E3S 77230T3S $54.50 77230E3GS 77230T3GS $67.25

4 77240E3S 77240T3S $77.50 77240E3GS 77240T3GS $95.25

5 77250E3S 77250T3S $122.50 77250E3GS 77250T3GS $216.75

6 77260E3S 77260T3S $145.00 77260E3GS 77260T3GS $177.25

8 77280E3S 77280T3S $191.50 77280E3GS 77280T3GS $240.00

10 77210E3S 77210T3S $326.00 77210E3GS 77210T3GS $415.00

12 77212E3S 77212T3S $371.00 77212E3GS 77212T3GS $477.75

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

Page 7: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 7 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

#772 Rigid Couplingw/Grade "L" Silicone Gasket

Nom.Size Painted List Price Galvanized List Price

1

1

4

77213LS $88.75 77213LGS $102.50

1

1

2

77215LS $88.75 77215LGS $102.50

2 77220LS $61.00 77220LGS $69.25

2

1

2

77225LS $69.50 77225LGS $81.25

3 77230LS $76.00 77230LGS $90.00

4 77240LS $112.25 77240LGS $132.75

5 77250LS $206.25 77250LGS $235.50

6 77260LS $236.50 77260LGS $275.00

8 77280LS $307.25 77280LGS $355.50

10 77210LS $474.75 77210LGS $577.00

12 77212LS $545.25 77212LGS $660.50

14 77214LS POA 77214LGS POA

16 77216LS POA 77216LGS POA

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

#772 Rigid Couplingw/Grade "O" Fluoroelastomer Gasket

Nom.Size Painted List Price Galvanized List Price

1

1

4

77213OS $175.25 77213OGS $190.00

1

1

2

77215OS $155.50 77215OGS $190.00

2 772200S $152.75 77220OGS $167.25

2

1

2

77225OS $165.25 77225OGS $182.00

3 77230OS $185.25 77230OGS $206.50

4 77240OS $302.50 77240OGS $335.75

5 77250OS $344.75 77250OGS $381.25

6 77260OS $418.00 77260OGS $467.50

8 77280OS $531.50 77280OGS $597.25

10 77210OS $767.25 77210OGS $884.00

12 77212OS $1,058.00 77212OGS $1,199.75

14 77214OS POA 77214OGS POA

16 77216OS POA 77216OGS POA

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

Page 8: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 8 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

#705 Flexible Couplingw/ Grade "E" EPDM or Grade "T" Nitrile Gasket

NomSize

Painted Galvanized

Grade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

1

1

4

70513ES 70513TS $21.75 70513EGS 70513TGS $28.00

1

1

2

70515ES 70515TS $26.50 70515EGS 70515TGS $33.25

2 70520ES 70520TS $27.00 70520EGS 70520TGS $34.00

2

1

2

70525ES 70525TS $31.25 70525EGS 70525TGS $39.50

3 70530ES 70530TS $36.25 70530EGS 70530TGS $45.75

4 70540ES 70540TS $50.75 70540EGS 70540TGS $66.50

5 70550ES 70550TS $73.25 70550EGS 70550TGS $95.25

6 70560ES 70560TS $88.00 70560EGS 70560TGS $114.50

8 70580ES 70580TS $137.75 70580EGS 70580TGS $184.00

10 70510ES 70510TS $368.75 70510EGS 70510TGS $362.25

12 70512ES 70512TS $412.00 70512EGS 70512TGS $406.25

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

#705 Flexible Couplingw/Grade "E" EPDM or Grade "T" Nitrile Tri-Seal Gasket

Nom.Size

Painted Galvanized

Grade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

1

1

4

70513E3S 70513T3S $35.75 70513E3GS 70513T3GS $43.00

1

1

2

70515E3S 70515T3S $39.50 70515E3GS 70515T3GS $47.25

2 70520E3S 70520T3S $40.50 70520E3GS 70520T3GS $48.25

2

1

2

70525E3S 70525T3S $48.25 70525E3GS 70525T3GS $57.25

3 70530E3S 70530T3S $51.25 70530E3GS 70530T3GS $62.00

4 70540E3S 70540T3S $73.50 70540E3GS 70540T3GS $90.00

5 70550E3S 70550T3S $126.00 70550E3GS 70550T3GS $150.75

6 70560E3S 70560T3S $139.25 70560E3GS 70560T3GS $169.00

8 70580E3S 70580T3S $179.75 70580E3GS 70580T3GS $228.50

10 70510E3S 70510T3S $368.75 70510E3GS 70510T3GS $484.25

12 70512E3S 70512T3S $412.00 70512E3GS 70512T3GS $542.00

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

Page 9: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 9 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

#705 Flexible Couplingw/Grade L Silicone Gasket

Nom.Size Painted List Price Galvanized List Price

1

1

4

70513LS $79.50 70513LGS $89.25

1

1

2

70515LS $82.00 70515LGS $96.25

2 70520LS $57.75 70520LGS $67.00

2

1

2

70525LS $66.50 70525LGS $76.75

3 70530LS $74.25 70530LGS $86.00

4 70540LS $109.75 70540LGS $128.50

5 70550LS $207.00 70550LGS $236.50

6 70560LS $235.25 70560LGS $274.00

8 70580LS $293.50 70580LGS $347.50

10 70510LS $477.25 70510LGS $576.75

12 70512LS $548.00 70512LGS $661.25

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

#705 Flexible Couplingw/Grade O Fluoroelastomer Gasket

Nom.Size Painted List Price

1

1

4

70513OS $166.00

1

1

2

70515OS $148.75

2 70520OS $149.50

2

1

2

70525OS $162.00

3 70530OS $183.75

4 70540OS $300.00

5 70550OS $345.50

6 70560OS $416.75

8 70580OS $517.75

10 70510OS $769.50

12 70512OS $1,060.50

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

Page 10: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 10 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006

022807-v1

#707 Heavy-Duty Flexible Couplingw/Grade E EPDM or Grade T Nitrile Gasket

NomSize

Painted Galvanized

Grade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

1 70701ES 70701TS $20.75 70701EGS 70701TGS $28.00

1

1

2

70715ES 70715TS $30.00 70715EGS 70715TGS $39.75

2 70720ES 70720TS $32.00 70720EGS 70720TGS $42.75

2

1

2

70725ES 70725TS $37.75 70725EGS 70725TGS $52.75

3 70730ES 70730TS $41.75 70730EGS 70730TGS $58.50

4 70740ES 70740TS $60.75 70740EGS 70740TGS $86.00

5 70750ES 70750TS $92.50 70750EGS 70750TGS $133.25

6 70760ES 70760TS $109.50 70760EGS 70760TGS $157.50

8 70780ES 70780TS $178.00 70780EGS 70780TGS $265.75

10 70710ES 70710TS $295.00 70710EGS 70710TGS $423.50

12 70712ES 70712TS $336.00 70712EGS 70712TGS $481.25

14 70714ES 70714TS $408.00 70714EGS 70714TGS $563.50

16 70716ES 70716TS $535.00 70716EGS 70716TGS $726.25

18 70718ES 70718TS $626.50 70718EGS 70718TGS $869.00

20 70721ES 70721TS $985.25 70721EGS 70721TGS $1,327.25

24 70724ES 70724TS $1,080.50 70724EGS 70724TGS $1,451.25

Note:

Items listed in shaded areas are non-cancelable and non-returnable.

#707 Heavy-Duty Flexible Couplingw/Grade E EPDM or Grade T Nitrile Tri-Seal Gasket

NomSize

Painted Galvanized

Grade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

11⁄2 70715E3S 70715T3S $42.75 70715E3GS 70715T3GS $53.50

2 70720E3S 70720T3S $44.75 70720E3GS 70720T3GS $56.50

21⁄2 70725E3S 70725T3S $55.00 70725E3GS 70725T3GS $70.25

3 70730E3S 70730T3S $56.75 70730E3GS 70730T3GS $74.00

4 70740E3S 70740T3S $82.50 70740E3GS 70740T3GS $108.50

5 70750E3S 70750T3S $145.50 70750E3GS 70750T3GS $189.00

6 70760E3S 70760T3S $161.00 70760E3GS 70760T3GS $211.50

8 70780E3S 70780T3S $218.00 70780E3GS 70780T3GS $299.25

10 70710E3S 70710T3S $350.25 70710E3GS 70710T3GS $471.75

12 70712E3S 70712T3S $411.75 70712E3GS 70712T3GS $542.25

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 11: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 11 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#707 Heavy-Duty Flexible Couplingw/Grade "L" Silicone or Grade "O" Fluoroelastomer Gasket

NomSize

Painted Coupling w/ Grade "L"

Silicone Gasket

ListPrice

Painted Coupling w/ Grade "O"

FluoroelastomerGasket

ListPrice

11⁄2 70715LS $90.00 70715OS $185.00

2 70720LS $62.75 70720OS $155.00

21⁄2 70725LS $73.25 70725OS $176.25

3 70730LS $79.75 70730OS $195.00

4 70740LS $119.25 70740OS $320.50

5 70750LS $226.75 70750OS $365.00

6 70760LS $256.75 70760OS $448.00

8 70780LS $333.50 70780OS $558.50

10 70710LS $499.00 70710OS $791.00

12 70712LS $577.75 70712OS $1,090.50

14 70714LS $704.75 70714OS $1,324.75

16 70716LS $924.50 70716OS $1,741.00

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 12: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 12 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#716 Reducing Couplingw/ Grade "E" EPDM Gasket or Grade "T" Nitrile Gasket

NomSize

Painted GalvanizedGrade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

2" x 11⁄2 7162015ES 7162015TS $45.00 7162015EGS 7162015TGS $54.75

21⁄2" x 2 7162520ES 7162520TS $59.00 7162520EGS 7162520TGS $74.00

3" x 2 7163020ES 7163020TS $67.25 7163020EGS 7163020TGS $85.25

3" x 21⁄2 7163025ES 7163025TS $57.75 7163025EGS 7163025TGS $74.00

4" x 2 7164020ES 7164020TS $106.75 7164020EGS 7164020TGS $135.25

4" x 21⁄2 7164025ES 7164025TS $95.75 7164025EGS 7164025TGS $126.25

4" x 3 7164030ES 7164030TS $89.50 7164030EGS 7164030TGS $116.00 5" x 4 7165040ES 7165040TS $120.75 7165040EGS 7165040TGS $159.25 6" x 4 7166040ES 7166040TS $182.50 7166040EGS 7166040TGS $230.25 6" x 5 7166050ES 7166050TS $159.75 7166050EGS 7166050TGS $207.25 8" x 6 7168060ES 7168060TS $273.50 7168060EGS 7168060TGS $346.75

#71 Grooved Flange Adapterw/ Grade "E" EPDM Gasket or Grade "T" Nitrile Gasket

NomSize

Painted GalvanizedGrade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

2 7120S 7120TS $130.00 7120GS 7120TGS $157.00

21⁄2 7125S 7125TS $161.25 7125GS 7125TGS $198.75

3 7130S 7130TS $174.00 7130GS 7130TGS $216.00 4 7140S 7140TS $233.25 7140GS 7140TGS $289.00 5 7150S 7150TS $270.75 7150GS 7150TGS $335.50 6 7160S 7160TS $295.25 7160GS 7160TGS $367.75 8 7180S 7180TS $333.50 7180GS 7180TGS $428.00 10 7110S 7110TS $528.25 7110GS 7110TGS $671.50 12 7112S 7112TS $691.50 7112GS 7112TGS $888.75

#770 High Pressure Rigid Couplingw/Grade "E" EPDM or Grade "T" Nitrile Gasket

NomSize

Painted GalvanizedGrade “E” EPDM Grade “T” Nitrile List Price Grade “E” EPDM Grade “T” Nitrile List Price

2 77020ES 77020TS $39.50 77020EGS 77020TGS $53.50

21⁄2 77025ES 77025TS $44.75 77025EGS 77025TGS $61.00

3 77030ES 77030TS $50.00 77030EGS 77030TGS $68.00 4 77040ES 77040TS $73.50 77040EGS 77040TGS $104.75 6 77060ES 77060TS $132.75 77060EGS 77060TGS $192.00 8 77080ES 77080TS $213.50 77080EGS 77080TGS $307.00 10 77010ES 77010TS $395.25 77010EGS 77010TGS $541.25 12 77012ES 77012TS $576.75 77012EGS 77012TGS $772.00

Note:Items listed in shaded areas are non-cancelable and non-refundable

For #770 High Pressure Rigid Coupling with Grade "E" EPDM Tri-Seal, Grade "T" Nitrile Tri-Seal, Grade "L" Silicone, or Grade "O" Fluoroelastomer Gasket Contact Tyco Fire and Building Products for price and availability

Page 13: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 13 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

Replacement GasketsEPDM "E" Gaskets

For #772, #770, #705, #707Nom.Size Part Number List Price

1 01EPDME $13.75

11⁄4 13EPDME $14.25

11⁄2 15EPDME $15.25

2 20EPDME $15.25

21⁄2 25EPDME $18.50

3 30EPDME $20.00

4 40EPDME $25.00

5 50EPDME $32.50

6 60EPDME $35.50

8 80EPDME $48.25

10 10EPDME $61.75

12 12EPDME $71.75

14 14EPDME $99.00

16 16EPDME $136.50

18 18EPDME $164.75

20 21EPDME $253.25

24 24EPDME $351.25

Replacement Tri-Seal GasketsEPDM "E" Gaskets

For #772, #770, #705, #707Nom.Size Part Number List Price

11⁄4 13EPDME3 $28.25

11⁄2 15EPDME3 $28.50

2 20EPDME3 $29.00

21⁄2 25EPDME3 $36.00

3 30EPDME3 $36.00

4 40EPDME3 $48.50

5 50EPDME3 $86.75

6 60EPDME3 $88.25

8 80EPDME3 $92.00

10 10EPDME3 $118.50

12 12EPDME3 $141.25

Replacement GasketsNitrile "T" Gaskets

For #772, #770, #705, #707Nom.Size Part Number List Price

1 01NITRILS $13.75

11⁄4 13NITRILS $14.25

11⁄2 15NITRILS $15.25

2 20NITRILS $15.25

21⁄2 25NITRILS $18.50

3 30NITRILS $20.00

4 40NITRILS $25.00

5 50NITRILS $32.50

6 60NITRILS $35.50

8 80NITRILS $48.25

10 10NITRILS $61.75

12 12NITRILS $71.75

14 14NITRILS $99.00

16 16NITRILS $136.50

18 18NITRILS $164.75

20 21NITRILS $253.25

24 24NITRILS $351.25

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Replacement Tri-Seal GasketsNitrile "T" Gaskets

For #772, #770, #705, #707Nom.Size Part Number List Price

11⁄4 13NITRILS3 $28.25

11⁄2 15NITRILS3 $28.50

2 20NITRILS3 $29.00

21⁄2 25NITRILS3 $36.00

3 30NITRILS3 $36.00

4 40NITRILS3 $48.50

5 50NITRILS3 $86.75

6 60NITRILS3 $88.25

8 80NITRILS3 $92.00

10 10NITRILS3 $118.50

12 12NITRILS3 $141.25

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 14: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 14 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Replacement GasketsGrade "L" Silicone Gasket

For #772, #770, #705, #707Nom.Size Part Number List Price

11⁄4 13SILICONE $73.50

11⁄2 15SILICONE $76.75

2 20SILICONE $47.00

21⁄2 25SILICONE $54.75

3 30SILICONE $59.00

4 40SILICONE $86.25

5 50SILICONE $170.25

6 60SILICONE $186.75

8 80SILICONE $208.25

10 10SILICONE $271.50

12 12SILICONE $320.50

14 14SILICONE $394.00

16 16SILICONE $524.25

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Replacement GasketsGrade "O" Fluoroelastomer Gasket

For #772, #770, #705, #707Nom.Size Part Number List Price

11⁄4 13FLUORO $164.50

11⁄2 15FLUORO $174.00

2 20FLUORO $142.00

21⁄2 25FLUORO $160.50

3 30FLUORO $177.50

4 40FLUORO $291.75

5 50FLUORO $312.50

6 60FLUORO $383.00

8 80FLUORO $439.00

10 10FLUORO $571.75

12 12FLUORO $847.25

14 14FLUORO $1,016.75

16 16FLUORO $1,340.75

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Replacement GasketsEPDM "E" Gaskets

For # 716 Reducing CouplingNom.Size Part Number List Price

2" x 11⁄2 2015EPDME $14.25

21⁄2" x 2 2520EPDME $18.75

3" x 2 3020EPDME $22.00

3" x 21⁄2 3025EPDME $22.00

4" x 2 4020EPDME $25.25

4" x 21⁄2 4025EPDME $25.50

4" x 3 4030EPDME $26.75

5" x 4 5040EPDME $31.25

6" x 4 6040EPDME $35.75

6" x 5 6050EPDME $38.75

8" x 6 8060EPDME $43.00

Replacement GasketsGrade "T" Nitrile

For # 716 Reducing CouplingNom.Size Part Number List Price

2" x 11⁄2 2015NITRILS $14.25

21⁄2" x 2 2520NITRILS $18.75

3" x 2 3020NITRILS $22.00

3" x 21⁄2 3025NITRILS $22.00

4" x 2 4020NITRILS $25.25

4" x 21⁄2 4025NITRILS $25.50

4" x 3 4030NITRILS $26.75

5" x 4 5040NITRILS $31.25

6" x 4 6040NITRILS $35.75

6" x 5 6050NITRILS $38.75

8" x 6 8060NITRILS $43.00

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 15: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 15 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

#71 Flange Adapter Replacement "E" EPDM Gasket

Nom.Size Part Number List Price

2 7120EPDME $12.25

21⁄2 7125EPDME $14.50

3 7130EPDME $16.00

4 7140EPDME $20.50

5 7150EPDME $25.25

6 7160EPDME $28.50

8 7180EPDME $38.75

10 7110EPDME $50.00

12 7112EPDME $58.00

#71 Flange Adapter Replacement "T" Nitrile Gasket

Nom.Size Part Number List Price

2 7120NITRILS $12.25

21⁄2 7125NITRILS $14.50

3 7130NITRILS $16.00

4 7140NITRILS $20.50

5 7150NITRILS $25.25

6 7160NITRILS $28.50

8 7180NITRILS $38.75

10 7110NITRILS $50.00

12 7112NITRILS $58.00

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Coupling Nut & Bolt KitNom.Size Qty/Kit Part No. List Price

3⁄8" x 21⁄4" 2 NB37225 $6.50 1⁄2" x 3" 2 NB50300 $6.75

5⁄8" x 31⁄4" 2 NB62325 $8.25 5⁄8" x 43⁄4" 2 NB62475 $14.25 3⁄4" x 43⁄4" 2 NB75475 $13.50 7⁄8" x 61⁄2" 2 NB87650 $23.00

1" x 51⁄2" 3 NB10550 $23.00

1" x 61⁄2" 2 NB10650 $24.25

11⁄8" x 53⁄4" 4 NB12575 $31.50

Pipe TapeChrome Plated w/Grinnell Logo

Part Number List Price

PT1000 $32.50

Grinnell Gasket LubricantNom.Size Part Number List Price

1 Quart 32005 $9.50

1 Gallon 32006 $31.00

Grinnell Silicon Gasket LubricantRecommended for use with Tri-Seal Gasket

Dow Corning #DC No. 7Nom.Size Part Number List Price

5.3 oz Tube 32037 $58.75

8 Lb. Can 32038 $1,075.00

#71 Flange Washer AdapterNom.Size Part Number List Price

2 7120FW $41.75

21⁄2 7125FW $43.75

3 7130FW $51.25

4 7140FW $59.75

5 7150FW $72.50

6 7160FW $83.00

8 7180FW $105.25

10 7110FW $146.25

12 7112FW $188.75

# 71 Nut, Bolt and Gasket KitNom.Size Part Number List Price

2 50240 $31.00

21⁄2 50241 $31.00

3 50242 $31.00

4 50243 $61.00

5 50248 $65.75

6 50244 $65.75

8 50245 $65.75

10 50246 $147.50

12 50247 $147.50

Page 16: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 16 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#210 Mechanical Grooved 90° Elbow

#210 90° Elbow

Nom. Size Painted List Price Galvanized List Price

11⁄4 21013S $38.75 21013GS $51.25

11⁄2 21015S $38.75 21015GS $51.25

2 21020S $38.75 21020GS $51.25

21⁄2 21025S $38.75 21025GS $51.25

3 21030S $68.50 21030GS $86.00

4 21040S $74.75 21040GS $104.75

5 21050S $179.75 21050GS $232.75

6 21060S $211.25 21060GS $280.50

8 21080S $441.75 21080GS $582.50

10 21010S $803.00 21010GS $1,040.25

12 21012S $1,286.50 21012GS $1,659.75

#310 LR 90°Elbow

14 75788 $2,300.50 73513 $2,986.00

16 75789 $2,988.25 73514 $3,864.50

18 75790 $3,792.50 73515 $4,726.75

20 75826 $4,999.25 73516 $6,203.00

24 75827 $7,239.25 73517 $9,012.25

#316 Reducing Base Support Elbow, Groove x FlangeNom. Size Painted List Price Galvanized List Price

6 x 4 72646 $714.75 72670 $864.00

6 x 5 72647 $809.50 72671 $978.75

8 x 5 72645 $1,068.25 72672 $1,286.00

8 x 6 72649 $1,086.75 72673 $1,314.25

10 x 6 72650 $1,472.00 72674 $1,659.50

10 x 8 72651 $1,627.75 72675 $1,968.75

12 x 8 72652 POA 72676 POA

12 x 10 72653 POA 72677 POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 17: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 17 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#201 Mechanical Grooved 45° Elbow

#201 45° Elbow

Nom. Size Painted List Price Galvanized List Price

11⁄4 20113S $38.75 20113GS $48.50

11⁄2 20115S $38.75 20115GS $48.50

2 20120S $38.75 20120GS $48.50

21⁄2 20125S $38.75 20125GS $48.50

3 20130S $68.50 20130GS $81.00

4 20140S $74.75 20140GS $97.50

5 20150S $179.75 20150GS $223.25

6 20160S $211.25 20160GS $267.00

8 20180S $441.75 20180GS $554.75

10 20110S $803.00 20110GS $876.25

12 20112S $1,286.50 20112GS $1,499.75

#301 LR 45° Elbow

14 73520 $1,722.50 73532 $2,205.75

16 75828 $1,938.75 73533 $2,407.25

18 75829 $2,272.75 73534 $2,786.50

20 75830 $2,986.00 73535 $3,670.50

24 75832 $4,585.50 73536 $5,588.50

#312 Grooved 221⁄2° Elbow Nom. Size Painted List Price Galvanized List Price

11⁄4 75550 $41.75 75570 $53.50

11⁄2 75551 $41.75 75571 $53.50

2 75552 $41.75 75572 $53.50

21⁄2 75553 $41.75 75573 $53.50

3 75554 $60.75 75574 $77.00

4 75555 $80.75 75575 $105.00

5 75556 $250.00 75576 $301.75

6 75557 $228.25 75577 $291.25

8 75558 $477.00 75578 $592.75

10 75559 $654.00 75579 $849.75

12 75560 $884.25 75580 $1,096.75

14 75561 $1,020.75 75581 $1,265.75

16 75562 $1,224.50 75583 $1,518.50

18 75563 $1,483.00 75584 $1,839.00

20 75564 POA 75585 POA

24 75565 POA 75586 POA

Page 18: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 18 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#313 Grooved 111⁄4° Elbow Nom.Size Painted List Price Galvanized List Price

11⁄4 75300 $41.75 75316 $53.50

11⁄2 75301 $41.75 75317 $53.50

2 75302 $98.25 75318 $115.00

21⁄2 75303 $98.25 75319 $115.00

3 75304 $60.75 75313 $75.75

4 75305 $74.75 75314 $99.75

5 75306 $250.00 75320 $294.25

6 75307 $228.25 75321 $276.25

8 75308 $407.50 75322 $484.50

10 75309 $610.50 75315 $729.00

12 75310 $884.25 75323 $1,071.25

14 75311 $922.75 75324 POA

16 75312 $1,137.25 75325 POA

18 73537 $1,377.00 75326 POA

20 73538 $1,619.25 75327 POA

24 73539 $2,294.75 75328 POA

#310 Mechanical Grooved 90° LR Elbow Nom. Size Painted List Price Galvanized List Price

11⁄4 73500 POA 73502 POA

11⁄2 73501 POA 73503 POA

2 75780 $88.75 73504 $116.00

21⁄2 75781 $256.00 73505 $274.75

3 75782 $88.75 73506 $116.00

4 75783 $132.25 73507 $177.25

5 75825 $675.50 73508 $774.25

6 75784 $386.00 73509 $507.75

8 75785 $924.50 73510 $1,182.25

10 75786 $1,916.00 73511 $2,309.75

12 75787 $3,123.25 73512 $3,677.50

14 75788 $2,300.50 73513 $2,986.00

16 75789 $2,988.25 73514 $3,864.50

18 75790 $3,792.50 73515 $4,726.75

20 75826 $4,999.25 73516 $6,203.00

24 75827 $7,239.25 73517 $9,012.25

Page 19: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 19 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#301 Mechanical Grooved 45° LR Elbow Nom. Size Painted List Price Galvanized List Price

11⁄4 73518 POA 73521 POA

11⁄2 73519 POA 73522 POA

2 75791 $77.00 73523 $97.50

21⁄2 75792 $247.00 73524 $278.50

3 75793 $77.00 73525 $97.50

4 75794 $93.50 73526 $124.50

5 75795 $627.75 73527 $688.75

6 75796 $277.25 73528 $355.25

8 75797 $481.75 73529 $626.50

10 75798 $1,436.75 73530 $1,694.25

12 75799 $1,663.75 73531 $2,042.50

14 73520 $1,722.50 73532 $2,205.75

16 75828 $1,938.75 73533 $2,407.25

18 75829 $2,272.75 73534 $2,786.50

20 75830 $2,986.00 73535 $3,670.50

24 75832 $4,585.50 73536 $5,588.50

#219 Mechanical Grooved TeeNom. Size Painted List Price Galvanized List Price

11⁄4 21913S $59.75 21913GS $85.00

11⁄2 21915S $59.75 21915GS $85.00

2 21920S $59.75 21920GS $85.00

21⁄2 21925S $59.75 21925GS $85.00

3 21930S $83.25 21930GS $114.00

4 21940S $126.75 21940GS $172.50

5 21950S $297.25 21950GS $377.25

6 21960S $343.25 21960GS $468.25

8 21980S $752.75 21980GS $988.50

10 21910S $1,564.00 21910GS $2,025.50

12 21912S $2,180.25 21912GS $2,785.00

14 73564 $2,310.25 73568 $2,877.25

16 73563 $2,609.25 73569 $3,313.50

18 73565 $3,261.50 73570 $4,205.25

20 73566 $4,673.25 73571 $5,925.00

24 73567 $7,125.25 73572 $9,241.75

Page 20: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 20 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#310 - 3D, #310 - 5D, #310 - 6D Long Radius 90 Elbow, PaintedNom. Size 3D List Price 5D List Price 6D List Price

2 310203D POA 310205D POA 310206D POA

21⁄2 310253D POA 310255D POA 310256D POA

3 310303D POA 310305D POA 310306D POA

4 310403D POA 310405D POA 310406D POA

5 310503D POA 310505D POA 310506D POA

6 310603D POA 310605D POA 310606D POA

8 310803D POA 310805D POA 310806D POA

10 310103D POA 310105D POA 310106D POA

12 310123D POA 310125D POA 310126D POA

14 310143D POA 310145D POA 310146D POA

16 310163D POA 310165D POA 310166D POA

18 310183D POA 310185D POA 310186D POA

20 310213D POA 310215D POA 310216D POA

24 310243D POA 310245D POA 310246D POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

#306 - 3D, #306 - 5D, #306 - 6D, Long Radius 60 Elbow, PaintedNom. Size 3D List Price 5D List Price 6D List Price

2 306203D POA 306205D POA 306206D POA

21⁄2 306253D POA 306255D POA 306256D POA

3 306303D POA 306305D POA 306306D POA

4 306403D POA 306405D POA 306406D POA

5 306503D POA 306505D POA 306506D POA

6 306603D POA 306605D POA 306606D POA

8 306803D POA 306805D POA 306806D POA

10 306103D POA 306105D POA 306106D POA

12 306123D POA 306125D POA 306126D POA

14 306143D POA 306145D POA 306146D POA

16 306163D POA 306165D POA 306166D POA

18 306183D POA 306185D POA 306186D POA

20 306213D POA 306215D POA 306216D POA

24 306243D POA 306245D POA 306246D POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 21: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 21 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#301 -3D, #301 - 5D, #301 -6D, Long Radius 45 Elbow, PaintedNom. Size 3D List Price 5D List Price 6D List Price

2 301203D POA 301205D POA 301206D POA

21⁄2 301253D POA 301255D POA 301256D POA

3 301303D POA 301305D POA 301306D POA

4 301403D POA 301405D POA 301406D POA

5 301503D POA 301505D POA 301506D POA

6 301603D POA 301605D POA 301606D POA

8 301803D POA 301805D POA 301806D POA

10 301103D POA 301105D POA 301106D POA

12 301123D POA 301125D POA 301126D POA

14 301143D POA 301145D POA 301146D POA

16 301163D POA 301165D POA 301166D POA

18 301183D POA 301185D POA 301186D POA

20 301213D POA 301215D POA 301216D POA

24 301243D POA 301245D POA 301246D POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

#303 - 3D, #303 - 5D, #303 - 6D, Long Radius 30 Elbow, PaintedNom. Size 3D List Price 5D List Price 6D List Price

2 303203D POA 303205D POA 303206D POA

21⁄2 303253D POA 303255D POA 303256D POA

3 303303D POA 303305D POA 303306D POA

4 303403D POA 303405D POA 303406D POA

5 303503D POA 303505D POA 303506D POA

6 303603D POA 303605D POA 303606D POA

8 303803D POA 303805D POA 303806D POA

10 303103D POA 303105D POA 303106D POA

12 303123D POA 303125D POA 303126D POA

14 303143D POA 303145D POA 303146D POA

16 303163D POA 303165D POA 303166D POA

18 303183D POA 303185D POA 303186D POA

20 303213D POA 303215D POA 303216D POA

24 303243D POA 303245D POA 303246D POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 22: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 22 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#312 3D, #312 - 5D, #312 - 6D, Long Radius 22 1/2 Elbow, PaintedNom. Size 3D List Price 5D List Price 6D List Price

2 312203D POA 312205D POA 312206D POA

21⁄2 312253D POA 312255D POA 312256D POA

3 312303D POA 312305D POA 312306D POA

4 312403D POA 312405D POA 312406D POA

5 312503D POA 312505D POA 312506D POA

6 312603D POA 312605D POA 312606D POA

8 312803D POA 312805D POA 312806D POA

10 312103D POA 312105D POA 312106D POA

12 312123D POA 312125D POA 312126D POA

14 312143D POA 312145D POA 312146D POA

16 312163D POA 312165D POA 312166D POA

18 312183D POA 312185D POA 312186D POA

20 312213D POA 312215D POA 312216D POA

24 312243D POA 312245D POA 312246D POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

#313 - 3D, #313 - 5D, #313 - 6D, Long Radius 11 1/4 Elbow, PaintedNom. Size 3D List Price 5D List Price 6D List Price

2 313203D POA 313205D POA 313206D POA

21⁄2 313253D POA 313255D POA 313256D POA

3 313303D POA 313305D POA 313306D POA

4 313403D POA 313405D POA 313406D POA

5 313503D POA 313505D POA 313506D POA

6 313603D POA 313605D POA 313606D POA

8 313803D POA 313805D POA 313806D POA

10 313103D POA 313105D POA 313106D POA

12 313123D POA 313125D POA 313126D POA

14 313143D POA 313145D POA 313146D POA

16 313163D POA 313165D POA 313166D POA

18 313183D POA 313185D POA 313186D POA

20 313213D POA 313215D POA 313216D POA

24 313243D POA 313245D POA 313246D POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 23: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 23 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#315 Groove x Male Thread - Adapter Elbow Nom. Size Painted List Price Galvanized List Price

11⁄4 75761 $75.25 73540 $83.50

11⁄2 75762 $95.75 73541 $111.50

2 75763 $67.00 73542 $83.50

21⁄2 75764 $117.25 73543 $128.25

3 75765 $108.75 73544 $133.25

4 75766 $227.50 73545 $272.75

6 75767 $338.25 73546 $409.25

#320 Groove x Male Thread - Tee Nom. Size Painted List Price Galvanized List Price

11⁄4 73547 $127.00 73552 $149.75

11⁄2 75490 $199.00 73553 $234.25

2 75491 $127.00 73554 $149.75

21⁄2 75492 $169.25 73555 $202.75

3 75493 $169.25 73556 $202.75

4 75494A $264.25 73557 $363.75

5 73548 $593.75 73558 $699.50

6 75495A $679.50 73559 $800.25

8 73549 $952.25 73560 $1,116.25

10 73550 $1,935.00 73561 $2,329.50

12 73551 $2,660.75 73562 $3,202.75

Page 24: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 24 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#221 Cast Reducing Tee, #321 Grooved Reducing Tee Nom. Size Painted List Price Galvanized List Price

11⁄2" x 11⁄2" x 11⁄4 73574 $112.75 73589 $125.00

2" x 2" x 1 75410 $128.25 75470 $150.75

* 2" x 2" x 11⁄2 2212015S $128.25 2212015GS $152.75

21⁄2" x 21⁄2" x 1 75412 $128.25 $150.75

21⁄2 x 21⁄2 x 11⁄4 75413 $194.00 73590 $228.25

21⁄2" x 21⁄2" x 11⁄2 75414 $128.25 73591 $152.75

21⁄2" x 21⁄2" x 2 75415 $128.25 75472 $152.75

* 3" x 3" x 1 2213010S $113.25 2213010GS $145.00

3" x 3" x 11⁄2 75417 $113.25 73592 $146.00

* 3" x 3" x 2 2213020S $113.25 2213020GS $146.00

3" x 3" x 21⁄2 75419 $113.25 75474 $146.00

4" x 4" x 1 75420 $152.75 $191.00

4" x 4" X 11⁄4 73575 $221.25 73593 $271.50

4" x 4" x 11⁄2 75421 $152.75 73594 $191.00

* 4" x 4" x 2 2214020S $152.75 2214020GS $201.00

4" x 4" x 21⁄2 75423 $152.75 75476 $201.00

* 4" x 4" x 3 2214030S $152.75 2214030GS $201.00 5" x 5" x 2 75425 $372.00 73595 $459.50

5" x 5" x 21⁄2 75426 $302.50 73596 $381.25

5" x 5" x 3 75427 $302.50 75489 $381.25 5" x 5" x 4 75428 $327.75 73597 $414.50

* 6" x 6" x 2 2216020S $361.00 2216020GS $474.25

6" x 6" x 21⁄2 75430 $361.00 75479 $474.25

* 6" x 6" x 3 2216030S $361.00 2216030GS $474.25

* 6" x 6" x 4 2216040S $361.00 2216040GS $474.25 6" x 6" x 5 75433 $361.00 — $477.25 8" x 8" X 2 73576 $520.75 73599 $657.50 8" x 8" x 3 75435 $520.75 75482 $657.50 8" x 8" x 4 75436 $752.75 75483 $973.00 8" x 8" x 5 75437 $752.75 75484 $979.75 8" x 8" x 6 75438 $752.75 75485 $983.75

10" x 10" X 2 75461 $907.25 73620 $1,143.50 10" x 10" x 3 75439 $907.25 73621 $1,203.25 10" x 10" x 4 75440 $948.25 73622 $1,212.25 10" x 10" x 5 75441 $969.50 73623 $1,238.00 10" x 10" x 6 75442 $969.50 73624 $1,253.75 10" x 10" x 8 75443 $987.00 73625 $1,302.00 12" x 12" x 3 73600 $1,221.50 73626 $1,577.25 12" x 12" x 4 73577 $1,309.00 73627 $1,681.25 12" x 12" x 5 73578 $1,390.50 73628 $1,781.50 12" x 12" x 6 75444 $1,400.50 73629 $1,814.75 12" x 12" x 8 75445 $1,439.50 73630 $1,856.50 12" x 12" x 10 75446 $1,506.50 73631 $1,942.75 14" x 14" x 6 75447 $1,450.50 73632 $1,860.50 14" x 14" x 8 73579 $1,485.75 73633 $1,891.00 14" x 14" x 10 75448 $1,571.75 73634 $2,003.50 14" x 14" x 12 75449 $1,682.00 75486 $2,154.75

Page 25: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 25 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

(Continued from Previous page)

Nom. Size Painted List Price Galvanized List Price

16" x 16" x 4 73580 POA 73635 POA16" x 16" x 8 75450 $1,889.25 73636 $2,395.00 16" x 16" x 10 75451 $2,041.50 73637 $2,587.00 16" x 16" x 12 75452 $2,082.50 75469 $2,645.50 16" x 16" x 14 75453 $2,438.25 73638 POA18" x 18" x 8 75455 $2,408.00 73639 POA18" x 18" x 10 75456 $2,499.25 73640 POA18" x 18" x 12 75457 $2,499.25 73641 POA18" x 18" x 14 75458 $2,891.75 73642 POA18" x 18" x 16 75459 $3,155.75 73643 POA20" x 20" x 14 73581 $3,849.75 73644 POA20" x 20" x 16 73582 $4,129.50 73645 POA20" x 20" x 18 73583 $4,541.00 73646 POA24" x 24" x 10 73584 $5,019.75 73647 POA24" x 24" x 12 73585 $5,161.00 73648 POA24" x 24" x 14 73586 $5,756.50 73649 POA24" x 24" x 16 73587 $5,886.50 73650 POA24" x 24" x 18 75460 $5,995.25 73651 POA24" x 24" x 20 73588 $6,508.75 73652 POA

Notes* Available as cast fitting.Items listed in shaded areas are non-cancelable and non-returnable.

#323 Groove x Male Thread - Reducing Tee Nom. Size Painted List Price Galvanized List Price

11⁄2" x 11⁄2" x 11⁄4 73653 $149.50 73686 $195.75 2" x 2" x 1 75500 $135.75 75520 $159.25

2" x 2" x 11⁄4 75409 $135.75 $159.25

2" x 2" x 11⁄2 75501 $135.75 75522 $161.00

21⁄2" x 21⁄2" x 1 76502 $135.75 75408 $159.25

21⁄2 x 21⁄2 x 11⁄4 75502 $266.75 73608 $275.75

21⁄2" x 21⁄2" x 11⁄2 75503 $135.75 73609 $161.00

21⁄2" x 21⁄2" x 2 75504 $135.75 73610 $161.00 3" x 3" x 1 75505 $135.75 75521 $169.75

3" x 3" x 11⁄2 75506 $135.75 75546 $169.75 3" x 3" x 2 75507 $135.75 75523 $169.75

3" x 3" x 21⁄2 75508 $234.00 73611 $275.25 4" x 4" x 1 75509 $169.50 75524 $209.75

4" x 4" X 11⁄4 76541 $246.50 $296.50

4" x 4" x 11⁄2 75541 $169.50 76524 $209.75 4" x 4" x 2 75510 $169.50 75525 $209.75

4" x 4" x 21⁄2 75511 $169.50 73691 $219.00 4" x 4" x 3 75512 $169.50 75526 $219.00 5" x 5" x 2 75513 $278.00 73692 $350.25

5" x 5" x 21⁄2 76822 $327.50 $414.75 5" x 5" x 3 73654 $302.50 75535 $381.25

#221 Cast Reducing Tee, #321 Grooved Reducing Tee

Page 26: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 26 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

(Continued from Previous page)

Nom. Size Painted List Price Galvanized List Price

5" x 5" x 4 73655 $327.50 73693 $414.50 6" x 6" x 2 75514 $425.00 75527 $529.75

6" x 6" x 21⁄2 75590 $425.00 75528 $529.75 6" x 6" x 3 75515 $425.00 75529 $529.75 6" x 6" x 4 75516 $425.00 73694 $529.75 6" x 6" x 5 75517 $425.00 73695 $529.75 6" x 6" x 8 POA POA8" x 8" X 2 75518 $520.75 73696 $670.50 8" x 8" x 3 75519 $614.25 73697 $931.75 8" x 8" x 4 73656 $752.75 73698 $973.00 8" x 8" x 5 73657 $752.75 73699 $978.75 8" x 8" x 6 73658 $752.75 73700 $983.75

10" x 10" X 2 73659 $907.00 73701 $1,125.25 10" x 10" x 3 73660 $907.00 73702 $1,125.25 10" x 10" x 4 73661 $948.25 73703 $1,212.25 10" x 10" x 5 73662 $833.75 73704 $1,238.00 10" x 10" x 6 73663 $969.50 73705 $1,253.75 10" x 10" x 8 73664 $987.00 73706 $1,302.00 12" x 12" x 3 73665 $1,221.50 73707 $1,577.50 12" x 12" x 4 73666 $1,309.00 73708 $1,681.25 12" x 12" x 5 73667 $1,384.00 73709 $1,797.75 12" x 12" x 6 73668 $1,400.50 73710 $1,814.75 12" x 12" x 8 73669 $1,439.75 73711 $1,856.50 12" x 12" x 10 73670 $1,506.50 73712 $1,859.25 14" x 14" x 6 73671 POA 73713 POA14" x 14" x 8 73672 POA 73714 POA14" x 14" x 10 73673 POA 73715 POA14" x 14" x 12 73674 POA 73716 POA16" x 16" x 4 POA POA16" x 16" x 8 73675 POA 73717 POA

16" x 16" x 10 73676 POA 73718 POA16" x 16" x 12 73677 POA 73719 POA16" x 16" x 14 POA POA18" x 18" x 8 73678 POA 73720 POA

18" x 18" x 10 73679 POA 73721 POA18" x 18" x 12 73680 POA 73722 POA18" x 18" x 14 73681 POA 73723 POA18" x 18" x 16 73682 POA 73724 POA20" x 20" x 14 POA POA20" x 20" x 16 POA POA20" x 20" x 18 POA POA24" x 24" x 8 73683 POA 73725 POA

24" x 24" x 10 73684 POA 73726 POA24" x 24" x 12 73685 POA 73727 POA24" x 24" x 14 POA POA24" x 24" x 16 POA POA24" x 24" x 18 POA POA

NotesItems listed in shaded areas are non-cancelable and non-returnable.

#323 Groove x Male Thread - Reducing Tee

Page 27: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 27 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

#250 Cast Concentric Reducer, #350 Fabricated Concentric Reducer

(Sizes 11⁄2" thru 6")

Nom. Size Painted List Price Galvanized List Price

11⁄2 X 1 74328 $45.25 73400 $53.25

11⁄2 X 11⁄4 72918 $45.25 73755 $53.25

2 X 1⁄2 72850 $45.25 73392 $53.25

2 X 3⁄4 72851 $45.25 73401 $53.25

2 X 1 72852 $45.25 73402 $53.25

2 X 11⁄4 72853 $49.75 73403 $58.50

2 X 11⁄2 72854 $45.25 73404 $53.25

21⁄2 X 1 72855 $285.00 73393 $313.25

*21⁄2 X 11⁄4 2502513S $45.25 2502513GS $53.25

*21⁄2 X 11⁄2 2502515S $45.25 2502515GS $53.25

*21⁄2 X 2 2502520S $45.25 2502520GS $53.25

3 X 1 72860 $49.75 73406 $60.50

3 X 11⁄4 72861 $283.25 73396 $317.75

*3 X 11⁄2 2503015S $54.50 2503015GS $66.75

*3 X 2 2503020S $39.75 2503020GS $48.75

*3 X 21⁄2 2503025S $54.50 2503025GS $66.00

4 X 1 72867 $59.75 73409 $74.00

4 X 11⁄4 72868 $468.00 73756 $524.25

4 X 11⁄2 72869 $358.00 73410 $391.75

*4 X 2 2504020S $53.00 2504020GS $65.50

*4 X 21⁄2 2504025S $66.00 2504025GS $80.50

*4 X 3 2504030S $66.00 2504030GS $80.50

5 X 11⁄2 73747 POA 73757 POA

5 X 2 72876 $658.50 73399 $727.50

5 X 21⁄2 72877 $511.00 73758 $554.50

*5 X 3 2505030S $77.00 2505030GS $95.00 *5 X 4 2505040S $91.75 2505040GS $115.00 *6 X 2 2506020S $121.75 2506020GS $152.00

*6 X 21⁄2 2506025S $135.75 2506025GS $166.75

*6 X 3 2506030S $121.75 2506030GS $152.00 *6 X 4 2506040S $106.00 2506040GS $137.75 *6 X 5 2506050S $157.00 2506050GS $195.75 8 X 2 73748 POA 73760 POA

8 X 21⁄2 73749 $224.75 73761 $279.25

*8 X 3 2508030S $217.25 2508030GS $271.25 *8 X 4 2508040S $217.25 2508040GS $272.50 *8 X 5 2508050S $217.25 2508050GS $274.50 *8 X 6 2508060S $276.75 2508060GS $346.75 10 X 4 72889 $516.25 73764 $636.00 10 X 5 73750 $1,137.25 73765 $1,297.75 10 X 6 72890 $564.50 73425 $704.50 10 X 8 72891 $564.50 73422 $716.00 12 X 4 72893 673.25 73766 $832.75 12 X 6 72894 $673.25 73767 $832.75 12 X 8 72895 $1,011.00 73423 $1,194.25 12 X 10 72896 $1,011.00 73424 $1,252.50

Page 28: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 28 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

(Sizes 8" thru 24")(Continued from Previous Page)

Nom. Size Painted List Price Galvanized List Price

14 X 6 72897 $3,819.00 73768 $4,139.25 14 X 8 72898 $2,164.00 73769 $2,394.50 14 X 10 72899 $1,891.00 73770 $2,110.75 14 X 12 72900 $2,070.50 73771 $2,334.50 16 X 8 72901 $3,100.50 73772 $3,381.00 16 X 10 72902 $2,978.75 73773 $3,036.00 16 X 12 72903 $3,019.00 73774 $3,400.50 16 X 14 72904 $3,019.00 73775 $3,442.00 18 X 12 72906 $4,245.75 73776 POA 18 X 14 72910 $3,437.75 73777 $4,331.5018 X 16 72911 $3,437.75 73778 $4,331.5020 X 10 73751 POA 73779 POA 20 X 12 72915 POA 73780 POA 20 X 14 73752 $4,701.25 73781 POA 20 X 16 73753 POA 73782 POA 20 X 18 73754 $3,598.50 73783 POA 24 X 10 72920 POA 73784 POA 24 X 12 72921 POA 73785 POA 24 X 14 72922 POA 73786 POA 24 X 16 72923 POA 73787 POA 24 X 18 72924 POA 73788 POA 24 X 20 72925 $9,483.50 73789 POA

Notes* Available as cast fitting.Items listed in shaded areas are non-cancelable and non-returnable.

#251 Cast Eccentric Reducer, #351 Fabricated Eccentric Reducer Nom. Size Painted List Price Galvanized List Price

11⁄2" x 1 POA POA

11⁄2" x 11⁄4 73812 $190.50 73845 POA

2" x 1⁄2 POA POA

2" x 3⁄4 $418.75 POA2" x 1 $215.50 POA

2" x 11⁄4 73813 $235.50 73846 POA

2" x 11⁄2 72930 $197.25 73847 POA

21⁄2" x 1 $509.00 $563.50

21⁄2" x 11⁄4 72931 $296.00 73848 $335.75

21⁄2" x 11⁄2 72932 $234.75 73850 $268.25

21⁄2" x 2 72933 $95.00 73851 $130.25 3" x 1 $546.25 $600.75

3" x 11⁄4 73814 $494.50 73852 $544.75

3" x 11⁄2 76587 $271.25 73853 $317.00 * 3" x 2 2513020S $109.00 2513020GS $149.50

* 3" x 21⁄2 2513025S $109.00 2513025GS $152.75 4" x 1 $1,106.25 $1,186.00

4" x 11⁄4 73817 $669.25 73855 $722.75

4" x 11⁄2 73816 $669.25 73856 $722.75 * 4" x 2 2514020S $132.75 2514020GS $186.25

* 4" x 21⁄2 2514025S $132.75 2514025GS $186.25

#250 Cast Concentric Reducer, #350 Fabricated Concentric Reducer

Page 29: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 29 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

(Continued from Previous Page)

Nom. Size Painted List Price Galvanized List Price* 4" x 3 2514030S $132.75 2514030GS $186.25 5" x 11⁄2 POA POA5" x 2 73818 $738.00 73860 POA

5" x 21⁄2 73819 $628.75 73861 POA5" x 3 72939 $607.25 73862 POA

* 5" x 4 2515040S $181.25 2515040GS $300.50 6" x 2 73820 $1,046.00 72963 $1,138.75

6" x 21⁄2 72941 $1,245.00 73864 $1,355.75 * 6" x 3 2516030S $241.00 2516030GS $338.25 * 6" x 4 2516040S $211.00 2516040GS $310.50 * 6" x 5 2516050S $253.00 2516050GS $359.50 8" x 2 POA POA

8" x 21⁄2 $1,661.75 POA8" x 3 72946 $1,215.00 73868 $1,323.00 8" x 4 72947 $1,062.00 73869 $1,211.25 8" x 5 72948 $1,062.00 73870 $1,211.25 8" x 6 72949 $427.00 73871 $581.75 10" x 4 72950 $1,948.25 73872 $2,336.75 10" x 5 73821 $1,835.25 73873 $2,160.00 10" x 6 72951 $1,384.25 73874 $1,640.75 10" x 8 72952 $1,171.50 73875 $1,457.00 12" x 4 73822 POA 73876 POA12" x 6 73823 $1,849.00 73877 $2,226.75 12" x 8 72953 $1,801.50 73878 $2,156.50 12" x 10 72954 $1,613.50 73879 $1,913.75 14" x 6 73824 $4,664.00 73880 $5,550.75 14" x 8 72955 $3,531.50 73881 $4,029.50 14" x 10 73825 $3,230.00 73882 $3,532.75 14" x 12 72956 $3,137.25 73883 $3,431.50 16" x 8 73827 $5,151.00 73884 POA16" x 10 73828 $4,759.75 73885 POA16" x 12 72958 $4,681.50 73886 $5,120.00 16" x 14 73830 $4,581.50 73887 POA18" x 12 73831 $6,079.00 73888 POA18" x 14 73832 $5,523.25 73889 POA18" x 16 73833 $5,523.25 73890 POA20" x 10 73834 POA 73891 POA20" x 12 73835 POA 73892 POA20" x 14 73836 POA 73893 POA20" x 16 73837 $8,072.75 73894 $9,427.00 20" x 18 73838 POA 73895 POA24" x 10 73839 POA 73896 POA24" x 12 73840 POA 73897 POA24" x 14 73841 POA 73898 POA24" x 16 73842 POA 73899 POA24" x 18 73843 POA 73900 POA24" x 20 73844 POA 73901 POA

Note:Items listed in shaded areas are non-cancelable and non-returnable.

* Available as cast

#251 Cast Eccentric Reducer, #351 Fabricated Eccentric Reducer

Page 30: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 30 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#372 Reducer - Small End Threaded (Male)Nom. Size Painted List Price Galvanized List Price

11⁄2" x 1 76800 $47.00 76825 $58.00

2" x3⁄4 76801 $47.00 76826 $58.00

2" x 1 76802 $47.00 76827 $58.00

2" x 11⁄4 76815 $47.00 73794 $58.00

2" x 11⁄2 76803 $47.00 76828 $58.00

21⁄2" x 11⁄4 76816 $67.00 73795 $83.00

21⁄2" x 11⁄2 76817 $70.25 73796 $83.00

21⁄2" x 2 76804 $47.00 76829 $58.00

3" x 1 76805 $51.25 76830 $61.75

3" x 11⁄4 76818 $64.00 POA

3" x 11⁄2 76819 $58.00 73797 $69.50

3" x 2 76806 $58.00 76831 $69.50

3" x 21⁄2 76807 $70.25 76832 $83.00

31⁄2" x 3 73790 POA 73798 POA

4" x 1 76808 $66.50 76833 $80.50

4" x 11⁄4 76820 $104.25 POA

4" x 11⁄2 76821 $374.50 73799 $404.00

4" x 2 76809 $70.50 76834 $85.00

4" x 21⁄2 76810 $71.25 76835 $87.50

4" x 3 76811 $86.75 76836 $103.50

5" x 4 73791 $499.00 73800 $543.00

6" x 1 76812 $135.75 76837 $166.75

6" x 2 76813 $135.75 76838 $166.75

6" x 3 76814 $135.75 76839 $166.75

6" x 4 73792 $166.25 73801 POA

6" x 5 73793 POA 73802 POA

#391 Groove x Male Thread - Adapter NippleNom.Size Painted List Price Galvanized List Price

11⁄4" x 4 75121 $22.50 74292 POA

11⁄2" x 4 75122 $22.50 74293 POA

2" x 4 75123 $22.50 74294 POA

2" x 6 $36.00 POA

21⁄2" x 4 75124 $26.50 74295 POA

3" x 4 75125 $32.50 74296 POA

3" x 6 74335 $53.00 POA

4" x 6 75126 $53.75 74297 POA

5" x 6 75129 $111.75 74298 POA

6" x 6 75130 $144.25 74299 POA

8" x 6 75131 $161.75 74300 POA

10" x 8 75132 $235.50 74301 POA

12" x 8 75133 $295.25 74302 POA

Page 31: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 31 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#392 Groove x Groove - Adapter NippleNom.Size Painted List Price Galvanized List Price

11⁄4" x 4 75098 $22.50 74304 POA

11⁄2" x 4 75099 $22.50 74405 POA

2" x 4 75100 $22.50 74406 POA

21⁄2" x 4 75101 $26.50 74407 POA

3" x 4 75102 $32.50 74408 POA

4" x 6 75103 $53.75 74309 POA

5" x 6 75104 $111.75 74310 POA

6" x 6 75105 $144.25 74311 POA

8" x 6 75106 $161.75 74312 POA

10" x 8 75107 $235.50 74313 POA

12" x 8 75108 $295.25 74314 POA

#393 Groove x Plain - Adapter NippleNom.Size Painted List Price Galvanized List Price

11⁄4" x 4 75148 $22.50 74316 POA

11⁄2" x 4 74315 $22.50 74317 POA

2" x 4 75150 $22.50 74318 POA

21⁄2" x 4 75151 $26.50 74319 POA

3" x 4 75152 $32.50 74330 POA

4" x 6 75153 $53.75 74331 POA

5" x 6 75158 $111.75 74322 POA

6" x 6 75154 $144.25 74323 POA

8" x 6 75155 $161.75 74324 POA

10" x 8 75156 $235.50 74325 POA

12" x 8 75157 $295.25 74326 POA

#395 Hose Adapter Nipple, Groove x HoseNom.Size Painted List Price Galvanized List Price

1 x 31⁄4 72680 $77.75 72692 $92.50

11⁄4 x 35⁄8 72681 $77.75 72693 $92.50

11⁄2 x 4 72682 $77.75 72694 $92.50

2 x 45⁄8 72683 $77.75 72695 $92.50

21⁄2 x 51⁄2 72684 $77.75 72696 $92.50

3 x 6 72685 $111.75 72697 $135.00

4 x 71⁄4 72686 $195.25 72698 $235.25

5 x 93⁄4 72687 $295.25 72699 $354.50

6 x 11 72688 $351.25 72620 $429.00

8 x 121⁄2 72689 POA 72621 POA

10 x 14 72690 POA 72622 POA

12 x 16 72691 POA 72623 POA

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 32: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 32 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#380 Female Thread Adapter, Groove x FPTNom.Size Painted List Price Galvanized List Price

1 72601 $217.50 72607 $233.50

11⁄4 72602 $114.50 72608 $128.25

11⁄2 72603 $148.50 72609 $158.25

2 72604 $69.50 72610 $82.00

21⁄2 72613 $69.50 72614 $82.00

3 72605 $80.75 72611 $99.50

4 72606 $124.25 72612 $155.75

NoteItems listed in shaded areas are non-cancelable and non-returnable.

#314 Groove Mechanical Lateral Nom.Size Painted List Price Galvanized List Price

2 75700 $235.25 74700 $288.50

21⁄2 75701 $235.25 74701 $288.50

3 75702 $259.75 74702 $327.75

4 75703 $400.25 74703 $499.25

5 73902 $585.00 73903 $734.75

6 75704 $942.50 74704 $1,132.50

8 75705 $1,357.25 74705 $1,645.00

10 75706 $1,915.25 73904 $2,221.75

12 75707 $2,315.25 73905 $2,934.00

14 75708 POA 73906 POA

16 75709 POA 73907 POA

18 75710 POA 73908 POA

20 75711 POA 73909 POA

24 75712 POA 73910 POA

Page 33: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 33 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

#325 Grooved Reducing LateralNom.Size Painted List Price Galvanized List Price

3" x 3" x 2 75670 $203.50 73934 $254.25 3" x 3" x 21⁄2 75671 POA 75695 POA4" x 4" x 2 75672 $400.25 74672 $477.25

4" x 4" x 21⁄2 75673 $400.25 74673 $494.25 4" x 4" x 3 75674 $400.25 75696 $498.50 5" x 5" x 2 75675 POA 74675 POA

5" x 5" x 21⁄2 73911 $800.00 73935 POA5" x 5" x 3 75676 $585.00 74676 $726.00 5" x 5" x 4 75677 $585.00 74677 $737.25 6" x 6" x 2 75678 POA 74678 POA

6" x 6" x 21⁄2 73912 POA 73936 POA6" x 6" x 3 75679 $755.75 74679 $945.25 6" x 6" x 4 75680 $755.75 74680 $952.00 6" x 6" x 5 75681 $755.75 74681 $962.75 8" x 8" x 4 75682 $1,090.50 74682 $1,384.50 8" x 8" x 5 75683 $1,090.50 74683 $1,396.75 8" x 8" x 6 75684 $1,090.50 74684 $1,414.25

10" x 10" x 4 75685 $1,239.25 74685 $1,628.75 10" x 10" x 5 75686 POA 74686 POA10" x 10" x 6 75687 $1,359.50 74687 $1,737.75 10" x 10" x 8 75688 $1,384.75 74688 $1,849.25 12" x 12" x 4 75689 POA 74689 POA12" x 12" x 6 75690 $1,607.25 74690 $2,151.50 12" x 12" x 8 75691 $1,628.25 74691 $2,200.00 12" x 12" x 10 75692 $1,649.75 74692 $2,272.00 14" x 14" x 4 73913 POA 73937 POA14" x 14" x 6 73914 $1,859.50 73938 POA14" x 14" x 8 73915 POA 73939 POA14" x 14" x 10 73916 POA 73940 POA14" x 14" x 12 73917 POA 73941 POA16" x 16" x 6 73918 POA 73942 POA16" x 16" x 8 73919 POA 73943 POA16" x 16" x 10 73920 POA 73944 POA16" x 16" x 12 73921 POA 73945 POA16" x 16" x 14 73922 POA 73946 POA18" x 18" x 6 73923 POA 73947 POA18" x 18" x 8 73924 POA 73948 POA18" x 18" x 10 73925 POA 73949 POA18" x 18" x 12 73926 POA 73950 POA18" x 18" x 14 73927 POA 73951 POA18" x 18" x 16 73928 POA 73952 POA20" x 20" x 12 73929 POA 73953 POA20" x 20" x 14 73930 POA 73954 POA20" x 20" x 16 73931 POA 73955 POA24" x 24" x 16 73932 POA 74327 POA24" x 24" x 20 73933 POA 73956 POA

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 34: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 34 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#324 Mechanical Grooved Wye Nom. Size Painted List Price Galvanized List Price

11⁄4 75901 POA 74224 POA

11⁄2 75902 $225.75 74225 $268.25

2 75903 $225.75 74226 $268.25

21⁄2 75904 $225.75 74227 $268.25

3 75905 $269.75 74228 $320.50

4 75906 $353.25 74229 $425.50

5 75907 $506.25 74230 $608.75

6 75908 $626.25 74231 $762.25

8 75909 $901.50 74232 $1,108.25

10 75910 $1,555.50 74233 $1,905.75

12 75911 $1,718.25 74234 $2,174.00

14 75912 $2,200.25 74235 POA

16 75913 POA 74236 POA

18 75914 POA 74237 POA

20 75915 POA 74238 POA

24 75916 POA 74239 POA

Note:Items listed in shaded areas are non-cancelable and non-returnable.

#331 Grooved Mechanical Reducing Tee Wye Nom.Size Painted List Price Galvanized List Price

4" x 3" x 3 72037 $606.75 74213 $721.25

4" x 3" x 4 75734 $862.50 74214 $1,034.00

5" x 3" x 3 74207 $820.50 74215 $961.75

5" x 3" x 5 75736 $824.25 74216 $862.75

5" x 4" x 3 74208 POA 74217 POA

5" x 4" x 4 75737 POA 74218 POA

6" x 4" x 6 74209 POA 74219 POA

6" x 5" x 3 74210 POA 74220 POA

6" x 5" x 4 74211 POA 74221 POA

8" x 6" x 4 74212 POA 74222 POA

8" x 6" x 8 75746 POA 74223 POA

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 35: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 35 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

#330 Grooved Mechanical Tee Wye Nom.Size Painted List Price Galvanized List Price

2" x 2" x 2 75730 $409.75 73977 $488.50 21⁄2" x 21⁄2" x 21⁄2 75731 POA 73978 POA

3" x 3" x 3 75732 $469.50 73979 $567.50 4" x 4" x 3 73957 $566.50 73980 $686.00 4" x 4" x 4 75735 $652.25 73981 $794.00 5" x 5" x 3 73958 $820.50 73982 $961.75 5" x 5" x 4 73959 $945.00 73983 $1,055.75 5" x 5" x 5 75738 $1,390.00 73984 $1,698.25 6" x 6" x 3 73960 POA 73985 POA6" x 6" x 4 73961 $818.50 73986 $1,023.75 6" x 6" x 5 73962 POA 73987 POA6" x 6" x 6 75742 $1,246.50 73988 $1,541.50 8" x 8" x 3 73963 $799.75 73989 $1,162.75 8" x 8" x 4 73964 $953.25 73990 $1,314.25 8" x 8" x 5 73965 POA 73991 POA8" x 8" x 6 73966 $1,376.75 73992 $1,800.25 8" x 8" x 8 75759 $1,897.25 73993 $2,405.75

10" x 10" x 3 73967 $1,102.50 73994 $1,528.75 10" x 10" x 4 73968 $1,209.25 73995 $1,661.25 10" x 10" x 5 73969 POA 73996 POA10" x 10" x 6 73970 POA 73997 POA10" x 10" x 8 73971 $2,081.50 73998 $2,678.50

10" x 10" x 10 75752 $2,718.75 73999 $3,486.50 12" x 12" x 3 73972 POA 72031 POA12" x 12" x 4 73973 POA 72032 POA12" x 12" x 6 73974 POA 72033 POA12" x 12" x 8 73975 POA 72034 POA

12" x 12" x 10 73976 POA 72035 POA12" x 12" x 12 75758 $3,749.50 72036 $4,761.00

Note:Items listed in shaded areas are non-cancelable and non-returnable.

#327 Mechanical Grooved Cross Nom. Size Painted List Price Galvanized List Price

11⁄4 73728 $176.75 73736 $206.00

11⁄2 73729 $190.25 73738 $221.00 2 75840 $108.00 75849 $129.00

21⁄2 75841 $108.00 75850 $129.00 3 75842 $193.50 75851 $237.00 4 75843 $321.50 75852 $395.75 5 73730 $655.75 73739 $791.25 6 75845 $843.25 75853 $1,023.00 8 75846 $1,110.50 76757 $1,374.00 10 75847 $1,893.50 76758 $2,342.00 12 75848 $2,732.25 76759 $3,404.75 14 73731 POA 73742 POA16 73732 POA 73743 POA18 73733 POA 73744 POA20 73734 POA 73745 POA24 73735 POA 73746 POA

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 36: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 36 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#260 Grooved CapNom.Size Painted List Price Galvanized List Price

1 26001S $32.25 26001GS $39.00

11⁄4 26013S $32.25 26013GS $39.00

11⁄2 26015S $32.25 26015GS $39.00

2 26020S $32.25 26020GS $39.00

21⁄2 26025S $32.25 26025GS $39.00

3 26030S $32.25 26030GS $39.00 4 26040S $35.00 26040GS $46.00 5 26050S $83.00 26050GS $111.25 6 26060S $83.00 26060GS $111.25 8 26080S $159.00 26080GS $210.75 10 26010S $335.50 26010GS $437.00 12 26012S $549.50 26012GS $699.75 14 73807 $1,185.50 75488 $1,357.25 16 73803 $1,342.00 73808 $1,602.75 18 73804 $1,553.75 73809 $1,835.75 20 73805 $1,764.25 73810 $2,106.75 24 73806 $2,402.50 73811 $2,778.50

NoteSize 14" to 24" are fabricated Figure #360 Caps.

#260 Grooved Cap w/ 1⁄2" TapNom.Size Painted List Price

11⁄4 26013TS $40.50

11⁄2 26015TS $40.50

2 26020TS $40.50

21⁄2 26025TS $40.50

3 26030TS $40.50

4 26040TS $44.00

5 26050TS $104.00

6 26060TS $106.25

8 26080TS $199.50

10 26010TS $421.50

12 26012TS $690.00

#260 Grooved Cap w/ 3⁄4" TapNom.Size Painted List Price

21⁄2 26025T75S $40.50

3 26030T75S $40.50

4 26040T75S $44.00

5 26050T75S $104.00

6 26060T75S $106.25

8 26080T75S $199.50

10 26010T75S $421.50

12 26012T75S $690.00

#260 Grooved Cap w/ 1 TapNom.Size Painted List Price

3 26030T1S $40.50

4 26040T1S $44.00

5 26050T1S $104.00

6 26060T1S $106.25

8 26080T1S $199.50

10 26010T1S $421.50

12 26012T1S $690.00

Page 37: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 37 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#341 Groove x Flange - Adapter 150# Nom. Size Painted List Price Galvanized List Price

11⁄4 74240 POA 74245 POA

11⁄2 74241 $165.75 74246 $262.00

2 73230 $165.75 73250 $262.00

21⁄2 73231 $332.00 73251 $391.25

3 73232 $340.00 73252 $404.50

4 73233 $388.00 73253 $565.50

5 73234 $537.00 73254 $744.50

6 73235 $546.50 73255 $754.40

8 73236 $676.75 73256 $1,008.25

10 73237 $1,062.25 74253 $1,593.00

12 73238 $1,455.00 74254 $2,100.75

14 73239 $3,204.00 74255 $3,563.75

16 73240 $3,817.50 74256 $4,432.75

18 73241 $4,226.75 74257 $4,601.00

20 73242 $4,434.00 74258 $4,797.50

24 73243 $4,642.00 74259 $4,994.25

Note:Items listed in shaded areas are non-cancelable and non-returnable.

#342 Groove x Flange - Adapter 300# Nom. Size Painted List Price Galvanized List Price

11⁄4 74260 POA 74276 POA

11⁄2 74261 $190.75 74277 $224.50

2 74262 $204.00 74278 $239.50

21⁄2 74263 $204.00 74279 $239.50

3 74264 $283.00 74280 $358.25

4 73260 $533.75 73263 $610.75

5 73261 $546.50 73264 $561.50

6 73262 $546.50 74283 $826.00

8 74268 $1,119.00 74284 $1,331.00

10 74269 $1,440.75 74285 $1,696.50

12 74270 $2,162.25 74286 $2,546.75

14 74271 POA 74287 POA

16 74272 POA 74288 POA

18 74273 POA 74289 POA

20 74274 POA 74290 POA

24 74275 POA 74291 POA

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Page 38: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 38 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#397 Groove x Groove - Swaged NippleNom.Size Painted List Price

2" x 1 76840 $153.50

2" x 11⁄4 76841 $153.50

2" x 11⁄2 76842 $153.50

21⁄2" x 1 76843 $153.50

21⁄2" x 11⁄4 76844 $153.50

21⁄2" x 11⁄2 76845 $153.50

21⁄2" x 2 76846 $132.00

3" x 1 76847 $194.00

3" x 11⁄4 76848 $194.00

3" x 11⁄2 76849 $194.00

3" x 2 76850 $144.25

3" x 21⁄2 76851 $144.25

31⁄2" x 3 76852 $175.25

4" x 1 76853 $263.00

4" x 11⁄4 76854 $263.00

4" x 11⁄2 76855 $263.00

4" x 2 76856 $199.25

4" x 21⁄2 76857 $199.25

4" x 3 76858 $199.25

4" x 31⁄2 76859 $199.25

5" x 2 76860 $730.50

5" x 3 76861 $564.25

5" x 4 76862 $464.00

6" x 1 76863 $1,391.50

6" x 11⁄4 76864 $1,391.50

6" x 11⁄2 76865 $1,391.50

6" x 2 76866 $1,029.25

6" x 21⁄2 76867 $1,029.25

6" x 3 76868 $667.25

6" x 4 76870 $506.50

6" x 5 76871 $506.50

8" x 6 72038 $1,253.50

Page 39: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 39 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#398 Groove x Male Thread - Swaged NippleNom.Size Painted List Price

2" x 1 77001 $153.50

2" x 11⁄4 77002 $153.50

2" x 11⁄2 77003 $153.50

21⁄2" x 1 77004 $153.50

21⁄2" x 11⁄4 77005 $153.50

21⁄2" x 11⁄2 77006 $153.50

21⁄2" x 2 77007 $132.00

3" x 1 77008 $194.00

3" x 11⁄4 77009 $194.00

3" x 11⁄2 77010 $194.00

3" x 2 77011 $144.25

3" x 21⁄2 77012 $144.25

31⁄2" x 3 77013 $175.25

4" x 1 77014 $263.00

4" x 11⁄4 77015 $263.00

4" x 11⁄2 77016 $263.00

4" x 2 77017 $199.25

4" x 21⁄2 77018 $199.25

4" x 3 77019 $199.25

4" x 31⁄2 77020 $199.25

5" x 2 77021 $730.50

5" x 3 77022 $564.25

5" x 4 77023 $464.00

6" x 1 77024 $1,391.50

6" x 11⁄4 77025 $1,391.50

6" x 11⁄2 77026 $1,391.50

6" x 2 77027 $1,029.25

6" x 21⁄2 77028 $1,029.25

6" x 3 77029 $667.25

6" x 4 77031 $506.50

6" x 5 77032 $506.50

8" x 6 72039 $1,253.50

Page 40: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 40 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#399 Groove x Plain - Swaged NippleNom.Size Painted List Price

2" x 1 76051 $153.50

2" x 11⁄4 76052 $153.50

2" x 11⁄2 76053 $153.50

21⁄2" x 1 76054 $153.50

21⁄2" x 11⁄4 76055 $153.50

21⁄2" x 11⁄2 76056 $153.50

21⁄2" x 2 76057 $132.00

3" x 1 76058 $194.00

3" x 11⁄4 76059 $194.00

3" x 11⁄2 76060 $194.00

3" x 2 76061 $144.25

3" x 21⁄2 76062 $144.25

31⁄2" x 3 76063 $175.25

4" x 1 76064 $263.00

4" x 11⁄4 76065 $263.00

4" x 11⁄2 76066 $263.00

4" x 2 76067 $199.25

4" x 21⁄2 76068 $199.25

4" x 3 76069 $199.25

4" x 31⁄2 76070 $199.25

5" x 2 76071 $730.50

5" x 3 76072 $564.25

5" x 4 76073 $464.00

6" x 1 76074 $1,391.50

6" x 11⁄4 76075 $1,391.50

6" x 11⁄2 76076 $1,391.50

6" x 2 76077 $1,029.25

6" x 21⁄2 76078 $1,029.25

6" x 3 76079 $667.25

6" x 4 76081 $506.50

6" x 5 76082 $506.50

8" x 6 72040 $1,253.50

Page 41: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 41 –

Grinnell Mechanical Grooved ProductsSection 2 - Grooved Couplings & Fittings

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#730 Mechanical Tee - Threadedwith Grade "E" or Grade "T" Nitrile Gasket

NomSize

Painted ListPrice

Galvanized ListPriceGrade “E” EPDM Grade “T” Nitrile Grade “E” EPDM Grade “T” Nitrile

2" x1 ⁄2 7302005ES 7302005TS $37.75 7302005EGS 7302005TGS $47.50

2" x 3⁄4 73020075ES 73020075TS $37.75 73020075EGS 73020075TGS $47.50

2" x 1 7302010ES 7302010TS $37.75 7302010EGS 7302010TGS $47.50

2" x 11⁄4 7302013ES 7302013TS $43.50 7302013EGS 7302013TGS $54.25

2" x 11⁄2 7302015ES 7302015TS $43.50 7302015EGS 7302015TGS $54.25

21⁄2" x 1⁄2 7302505ES 7302505TS $37.75 7302505EGS 7302505TGS $47.50

21⁄2" x3⁄4 73025075ES 73025075TS $37.75 73025075EGS 73025075TGS $47.50

21⁄2" x 1 7302510ES 7302510TS $37.75 7302510EGS 7302510TGS $47.50

21⁄2" x 11⁄4 7302513ES 7302513TS $53.25 7302513EGS 7302515TGS $65.25

21⁄2" x 11⁄2 7302515ES 7302515TS $53.25 7302515EGS 7302515TGS $65.25

21⁄2" x 2 7302520EP 7302520TP $53.25 7302520EGP 7302520TGP $65.25

3" X 1⁄2 7303005ES 7303005TS $43.50 7303005EGS 7303005TGS $53.00

3" X 3⁄4 73030075ES 73030075TS $43.50 73030075EGS 73030075TGS $53.00

3" X 1 7303010ES 7303010TS $43.50 7303010EGS 7303010TGS $53.00

3" x 11⁄4 7303013ES 7303013TS $55.50 7303013EGS 7303013TGS $69.50

3" x 11⁄2 7303015ES 7303015TS $55.50 7303015EGS 7303015TGS $69.50

3" x 2 7303020ES 7303020TS $63.75 7303020EGS 7303020TGS $79.75

4" X 1⁄2 7304005ES 7304005TS $55.00 7304005EGS 7304005TGS $65.75

4" X 3⁄4 73040075ES 73040075TS $55.00 73040075EGS 73040075TGS $65.75

4" X 1 7304010ES 7304010TS $55.00 7304010EGS 7304010TGS $65.75

4" x 11⁄4 7304013ES 7304013TS $65.00 7304013EGS 7304013TGS $76.25

4" x 11⁄2 7304015ES 7304015TS $67.25 7304015EGS 7304015TGS $85.00

4" x 2 7304020ES 7304020TS $67.25 7304020EGS 7304020TGS $85.75

4" x 21⁄2 7304025ES 7304025TS $70.25 7304025EGS 7304025TGS $91.75

4" x 3 7304030ES 7304030TS $75.00 7304030EGS 7304030TGS $96.75

5" x 11⁄2 7305015EP 7305015TP $82.50 7305015EGP 7305015TGP $105.00

5" x 2 7305020ES 7305020TS $82.50 7305020EGS 7305020TGS $105.00

5" x 21⁄2 7305025ES 7305025TS $87.00 7305025EGS 7305025TGS $111.25

5" x 3 7305030EP 7305030TP $92.75 7305030EGP 7305030TGP $120.00

6" x 11⁄4 7306013EP 7306013TP $84.25 7306013EGP 7306013TGP $108.75

6" x 11⁄2 7306015ES 7306015TS $84.25 7306015EGS 7306015TGS $108.75

6" x 2 7306020ES 7306020TS $84.25 7306020EGS 7306020TGS $108.75

6" x 21⁄2 7306025ES 7306025TS $91.25 7306025EGS 7306025TGS $118.00

6" x 3 7306030ES 7306030TS $97.00 7306030EGS 7306030TGS $125.25

6" x 4 7306040ES 7306040TS $107.50 7306040EGS 7306040TGS $140.25

8" x 21⁄2 7308025ES 7308025TS $148.75 7308025EGS 7308025TGS $188.25

8" x 3 7308030ES 7308030TS $157.25 7308030EGS 7308030TGS $199.50

8" x 4 7308040ES 7308040TS $161.75 7308040EGS 7308040TGS $209.50

Page 42: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 42 –

Grinnell Mechanical Grooved ProductsSection 3 - Branch Outlets

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#730 Mechanical Tee - Groovedwith Grade "E" or Grade "T" Nitrile Gasket

NomSize

Painted ListPrice

Galvanized ListPriceGrade “E” EPDM Grade “T” Nitrile Grade “E” EPDM Grade “T” Nitrile

2" x 11⁄4 7302013ERS 7302013TRS $43.50 7302013EGRS 7302013TGRS $54.25

2" x 11⁄2 7302015ERS 7302015TRS $43.50 7302015EGRS 7302015TGRS $54.25

21⁄2" x 11⁄4 7302513ERS 7302513TRS $53.25 7302513EGRS 7302513TGRS $65.25

21⁄2" x 11⁄2 7302515ERS 7302515TRS $53.25 7302515EGRS 7302515TGRS $65.25

21⁄2" x 2 7302520ERP 7302520TRP $53.25 7302520EGRP 7302520TGRP $65.25

3" x 11⁄4 7303013ERS 7303013TRS $55.50 7303013EGRS 7303013TGRS $69.50

3" x 11⁄2 7303015ERS 7303015TRS $55.50 7303015EGRS 7303015TGRS $69.50

3" x 2 7303020ERS 7303020TRS $63.75 7303020EGRS 7303020TGRS $79.75

4" x 11⁄4 7304013ERS 7304013TRS $65.00 7304013EGRS 7304013TGRS $76.25

4" x 11⁄2 7304015ERS 7304015TRS $67.25 7304015EGRS 7304015TGRS $85.00

4" x 2 7304020ERS 7304020TRS $67.25 7304020EGRS 7304020TGRS $85.75

4" x 21⁄2 7304025ERS 7304025TRS $70.25 7304025EGRS 7304025TGRS $91.75

4" x 3 7304030ERS 7304030TRS $75.00 7304030EGRS 7304030TGRS $96.75

5" x 11⁄2 7305015ERP 7305015TRP $82.50 7305015EGRP 7305015TGRP $105.00

5" x 2 7305020ERS 7305020TRS $82.50 7305020EGRS 7305020TGRS $105.00

5" x 21⁄2 7305025ERS 7305025TRS $87.00 7305025EGRS 7305025TGRS $111.25

5" x 3 7305030ERP 7305030TRP $92.75 7305030EGRP 7305030TGRP $118.75

6" x 11⁄4 7306013ERP 7306013TRP $84.25 7306013EGRP 7306013TGRP $108.75

6" x 11⁄2 7306015ERS 7306015TRS $84.25 7306015EGRS 7306015TGRS $108.75

6" x 2 7306020ERS 7306020TRS $84.25 7306020EGRS 7306020TGRS $108.75

6" x 21⁄2 7306025ERS 7306025TRS $92.75 7306025EGRS 7306025TGRS $118.00

6" x 3 7306030ERS 7306030TRS $97.00 7306030EGRS 7306030TGRS $125.25

6" x 4 7306040ERS 7306040TRS $107.50 7306040EGRS 7306040TGRS $140.25

8" x 21⁄2 7308025ERS 7308025TRS $148.75 7308025EGRS 7308025TGRS $188.25

8" x 3 7308030ERS 7308030TRS $157.25 7308030EGRS 7308030TGRS $199.50

8" x 4 7308040ERS 7308040TRS $161.75 7308040EGRS 7308040TGRS $209.50

Page 43: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 43 –

Grinnell Mechanical Grooved ProductsSection 3 - Branch Outlets

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#730 Mechanical Cross - Threadedwith Grade "E" or Grade "T" Nitrile Gasket

NomSize

Painted ListPrice

Galvanized ListPriceGrade “E” EPDM Grade “T” Nitrile Grade “E” EPDM Grade “T” Nitrile

2" x 11⁄4 7302013ECS 7302013TCS $68.50 7302013EGCS 7302013TGCS $89.00

2" x 11⁄2 7302015ECS 7302015TCS $68.50 7302015EGCS 7302015TGCS $89.00

21⁄2" x 11⁄4 7302513ECS 7302513TCS $83.00 7302513EGCS 7302513TGCS $107.25

21⁄2" x 11⁄2 7302515ECS 7302515TCS $83.00 7302515EGCS 7302515TGCS 107.25

3" x 11⁄4 7303013ECS 7303013TCS $83.00 7303013EGCS 7303013TGCS $104.00

3" x 11⁄2 7303015ECS 7303015TCS $83.00 7303015EGCS 7303015TGCS $104.00

3" x 2 7303020ECS 7303020TCS $95.75 7303020EGCS 7303020TGCS $119.50

4" x 11⁄4 7304013ECS 7304013TCS $100.75 7304013EGCS 7304013TGCS $126.75

4" x 11⁄2 7304015ECS 7304015TCS $100.75 7304015EGCS 7304015TGCS $126.75

4" x 2 7304020ECS 7304020TCS $107.75 7304020EGCS 7304020TGCS $128.00

4" x 21⁄2 7304025ECS 7304025TCS $107.75 7304025EGCS 7304025TGCS $128.00

4" x 3 7304030ECS 7304030TCS $112.75 7304030EGCS 7304030TGCS $145.50

5" x 2 7305020ECS 7305020TCS $123.25 7305020EGCS 7305020TGCS $157.25

5" 21⁄2 7305025ECS 7305025TCS $130.25 7305025EGCS 7305025TGCS $166.75

5" X 3 7305030ECP 7305030TCP $139.25 7305030EGCP 7305030TGCP $179.25

6" x 11⁄2 7306015ECS 7306015TCS POA 7306015EGCS 7306015TGCS POA

6" x 2 7306020ECS 7306020TCS POA 7306020EGCS 7306020TGCS POA

6" x 21⁄2 7306025ECS 7306025TCS $136.50 7306025EGCS 7306025TGCS $176.25

6" x 3 7306030ECS 7306030TCS $145.00 7306030EGCS 7306030TGCS $187.25

6" x 4 7306040ECS 7306040TCS $160.50 7306040EGCS 7306040TGCS $209.75

8" x 21⁄2 7308025ECS 7308025TCS $222.75 7308025EGCS 7308025TGCS $281.75

8" x 3 7308030ECS 7308030TCS $235.00 7308030EGCS 7308030TGCS $299.00

8" x 4 7308040ECS 7308040TCS $242.50 7308040EGCS 7308040TGCS $314.00

Page 44: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 44 –

Grinnell Mechanical Grooved ProductsSection 3 - Branch Outlets

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#730 Mechanical Cross - Groovedwith Grade "E" or Grade "T" Nitrile Gasket

NomSize

Painted ListPrice

Galvanized ListPriceGrade “E” EPDM Grade “T” Nitrile Grade “E” EPDM Grade “T” Nitrile

2" x 11⁄4 7302013ERCS 7302013TRCS $68.50 7302013EGRCS 7302013TGRCS $89.00

2" x 11⁄2 7302015ERCS 7302015TRCS $68.50 7302015EGRCS 7302015TGRCS $89.00

21⁄2" x 11⁄4 7302513ERCS 7302513TRCS $83.00 7302513EGRCS 7302513TGRCS $107.25

21⁄2" x 11⁄2 7302515ERCS 7302515TRCS $83.00 7302515EGRCS 7302515TGRCS $107.25

3" x 11⁄4 7303013ERCS 7303013TRCS $83.00 7303013EGRCS 7303013TGRCS $104.00

3" x 11⁄2 7303015ERCS 7303015TRCS $83.00 7303015EGRCS 7303015TGRCS $104.00

3" x 2 7303020ERCS 7303020TRCS $95.75 7303020EGRCS 7303020TGRCS $119.50

4" x 11⁄4 7304013ERCS 7304013TRCS $100.75 7304013EGRCS 7304013TGRCS $126.75

4" x 11⁄2 7304015ERCS 7304015TRCS $100.75 7304015EGRCS 7304015TGRCS $126.75

4" x 2 7304020ERCS 7304020TRCS $107.75 7304020EGRCS 7304020TGRCS $128.00

4" x 21⁄2 7304025ERCS 7304025TRCS $107.75 7304025EGRCS 7304025TGRCS $128.00

4" x 3 7304030ERCS 7304030TRCS $112.75 7304030EGRCS 7304030TGRCS $145.50

5" x 2 7305020ERCS 7305020TRCS $123.25 7305020EGRCS 7305020TGRCS $157.25

5" 21⁄2 7305025ERCS 7305025TRCS $130.25 7305025EGRCS 7305025TGRCS $166.75

5" X 3 7305030ERCS 7305030TRCS $139.25 7305030EGRCS 7305030TGRCS $179.25

6" x 11⁄2 7306015ERCS 7306015TRCS POA 7306015EGRCS 7306015TGRCS POA

6" x 2 7306020ERCS 7306020TRCS POA 7306020EGRCS 7306020TGRCS POA

6" x 21⁄2 7306025ERCS 7306025TRCS $136.50 7306025EGRCS 7306025TGRCS $176.25

6" x 3 7306030ERCS 7306030TRCS $145.00 7306030EGRCS 7306030TGRCS $187.25

6" x 4 7306040ERCS 7306040TRCS $160.50 7306040EGRCS 7306040TGRCS $209.75

8" x 21⁄2 7308025ERCS 7308025TRCS $222.75 7308025EGRCS 7308025TGRCS $281.75

8" x 3 7308030ERCS 7308030TRCS $235.00 7308030EGRCS 7308030TGRCS $299.00

8" x 4 7308040ERCS 7308040TRCS $242.50 7308040EGRCS 7308040TGRCS $314.00

Page 45: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 45 –

Grinnell Mechanical Grooved ProductsSection 3 - Branch Outlets

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#730 Replacement "E" EPDM GasketNom.Size Painted List Price

2" x 1⁄2 730EGS-1 $5.75

2" x 3⁄4 730EGS-1 $5.75

2" x 1 730EGS-1 $5.75

2" x 11⁄4 730EGS-2 $7.25

2" x 11⁄2 730EGS-2 $7.25

21⁄2" x 1⁄2 730EGS-1 $5.75

21⁄2" x 3⁄4 730EGS-1 $5.75

21⁄2" x 1 730EGS-1 $5.75

21⁄2" x 11⁄4 730EGS-3 $7.25

21⁄2" x 11⁄2 730EGS-3 $7.25

21⁄2" x 2 -

3" X 1⁄2 730EGS-1 $5.75

3" X 3⁄4 730EGS-1 $5.75

3" X 1 730EGS-1 $5.75

3" x 11⁄4 730EGS-2 $7.25

3" x 11⁄2 730EGS-3 $7.25

3" x 2 730EGS-4 $7.25

4" X 1⁄2 730EGS-1 $5.75

4" X3 ⁄4 730EGS-1 $5.75

4" X 1 730EGS-1 $5.75

4" x 11⁄4 730EGS-2 $7.25

4" x 11⁄2 730EGS-3 $7.25

4" x 2 730EGS-4 $7.25

4" x 21⁄2 730EGS-5 $8.25

4" x 3 730EGS-7 $9.25

5" x 11⁄2 730EGS-3 $7.25

5" x 2 730EGS-4 $7.25

5" x 21⁄2 730EGS-5 $8.25

5" x 3 730EGS-7 $9.25

6" x 11⁄4 $7.25

6" x 11⁄2 730EGS-3 $7.25

6" x 2 730EGS-4 $7.25

6" x 21⁄2 730EGS-6 $8.25

6" x 3 730EGS-8 $9.25

6" x 4 730EGS-9 $12.75

8" x 21⁄2 730EGS-6 $8.25

8" x 3 730EGS-8 $9.25

8" x 4 730EGS-9 $12.75

#730 Replacement "T" Nitrile GasketNom.Size Painted List Price

2" x 1⁄2 730TGS-1 $5.75

2" x 3⁄4 730TGS-1 $5.75

2" x 1 730TGS-1 $5.75

2" x 11⁄4 730TGS-2 $7.25

2" x 11⁄2 730TGS-2 $7.25

21⁄2" x 1⁄2 730TGS-1 $5.75

21⁄2" x 3⁄4 730TGS-1 $5.75

21⁄2" x 1 730TGS-1 $5.75

21⁄2" x 11⁄4 730TGS-3 $7.25

21⁄2" x 11⁄2 730TGS-3 $7.25

21⁄2" x 2 -

3" X 1⁄2 730TGS-1 $5.75

3" X 3⁄4 730TGS-1 $5.75

3" X 1 730TGS-1 $5.75

3" x 11⁄4 730TGS-2 $7.25

3" x 11⁄2 730TGS-3 $7.25

3" x 2 730TGS-4 $7.25

4" X 1⁄2 730TGS-1 $5.75

4" X 3⁄4 730TGS-1 $5.75

4" X 1 730TGS-1 $5.75

4" x 11⁄4 730TGS-2 $7.25

4" x 11⁄2 730TGS-3 $7.25

4" x 2 730TGS-4 $7.25

4" x 21⁄2 730TGS-5 $8.25

4" x 3 730TGS-7 $9.25

5" x 11⁄2 730TGS-3 $7.25

5" x 2 730TGS-4 $7.25

5" x 21⁄2 730TGS-5 $8.25

5" x 3 730TGS-7 $9.25

6" x 11⁄4 $7.25

6" x 11⁄2 730TGS-3 $7.25

6" x 2 730TGS-4 $7.25

6" x 21⁄2 730TGS-6 $8.25

6" x 3 730TGS-8 $9.25

6" x 4 730TGS-9 $12.75

8" x 21⁄2 730TGS-6 $8.25

8" x 3 730TGS-8 $9.25

8" x 4 730TGS-9 $12.75

Page 46: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 46 –

Grinnell Mechanical Grooved ProductsSection 4 - Valves

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#B302 Grooved Butterfly Valve, EPDM or Nitrile

Available with Gear Operator and Handwheel (as pictured) or Lever

Lock Handle. Specify when ordering

SizeLever Lock Part #

List PriceGear Op. Part #

List PriceEPDM, w Lever

NITRILE, w/Lever

EPDM, w/Gear Op.

NITRILE, w/Gear Op.

2" B30220EL B30220TL $387.00 B30220EG B30220TG $708.00

21⁄2" B30225EL B30225TL $477.00 B30225EG B30225TG $797.75

3 B30230EL B30230TL $497.50 B30230EG B30230TG $818.25

4 B30240EL B30240TL $594.75 B30240EG B30240TG $915.50

5" B30250EL B30250TL $1,060.50 B30250EG B30250TG $1,381.25

6" B30260EL B30260TL $1,119.50 B30260EG B30260TG $1,427.25

8" B30280EL B30280TL $1,456.50 B30280EG B30280TG $1,763.75

10" B30210EL B30210TL $2,584.50 B30210EG B30210TG $2,526.75

12" B30212EL B30212TL $2,859.50 B30212EG B30212TG $2,802.25

Model B308 Grooved Butterfly Valve, EPDM or Nitrile

D.I. Nickle Plated, Gear OperatorSize

Part # List riceEPDM NITRILE

14 B30814ENG B30814TNG $4,990.00 16 B30816ENG B30816TNG $6,826.00 18 B30818ENG B30818TNG $8,401.50 20 B30820ENG B30820TNG $11,369.00 24 B30824ENG B30824TNG $14,477.50

Note:Items listed in shaded areas are non-cancelable and non-returnable.

Model B308 Grooved Butterfly Valve - OptionItem List Price

Plain Shaft POA

Disc - 316 Stainless Steel POA

Disc - Bronze POA

Liner - Viton POA

Page 47: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 47 –

Grinnell Mechanical Grooved ProductsSection 4 - Valves

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

nModel B8101 Low Profile Butterfly Valve with Lever Handle

Size Part # List Price

2 B810120E $318.75

21⁄2 B810125E $404.25

3 B810130E $457.25

4 B810140E $503.25

6 B810160E $1,015.50

BV835 Grooved Ball Valve1,000 PSI with Lever Handle

Size Part # List Price

2 BV83520 $231.00

21⁄2 BV83525 $505.00

3 BV83530 $816.50

#590 Grooved Check Valve, EPDM or Nitrile

SizePart # List

PriceEPDM NITRILE

2 59030020 59030020T POA

21⁄2 59030025 59030025T $360.75

3 59030030 59030030T $426.25

4 59030040 59030040T $450.25

5 59030050 59030050T $749.50

6 59030060 59030060T $888.50

8 59030080 59030080T $1,214.00

10 59030010 59030010T P.O.A.

12 59030012 59030012T P.O.A.

Page 48: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 48 –

Grinnell Mechanical Grooved ProductsSection 4 - Valves

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#S853 Grooved Wye Strainer Size Painted List Price Galvanized List Price

2 S85320 $833.25 S85320G $931.50

21⁄2 S85325 $875.00 S85325G $991.75

3 S85330 $983.25 S85330G $1,130.50

4 S85340 $1,112.50 S85340G $1,316.00

5 S85350 $1,611.25 S85350G $1,920.00

6 S85360 $1,749.25 S85360G $2,152.50

8 S85380 $2,681.00 S85380G $3,356.50

10 S85310 $4,309.75 S85310G $5,410.50

12 S85312 $7,528.00 S85312G $9,149.50

#S855 Grooved Tee-Type StrainerSize Painted List Price Galvanized List Price

2 S85520 $822.75 S85520G $965.00

21⁄2 S85525 $864.50 S85525G $1,019.25

3 S85530 $970.75 S85530G $1,162.50

4 S85540 $1,099.00 S85540G $1,346.75

5 S85550 $1,591.50 S85550G $1,906.00

6 S85560 $1,727.50 S85560G $2,106.75

8 S85580 $2,648.00 S85580G $3,251.50

10 S85510 $3,888.50 S85510G $4,800.25

12 S85512 $5,006.00 S85512G $6,164.75

Page 49: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 49 –

Grinnell Mechanical Grooved ProductsSection 5 - Accessories

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#SD810 Groove x Flange - Suction DiffuserSize Part # List Price

3" x 2 S8103020 $1,812.50

3" x 21⁄2 S8103025 $1,302.75

3" x 3 S8103030 $1,320.25

4" x 2 S8104020 $1,356.50

4" x 21⁄2 S8104025 $1,431.50

4" x 3 S8104030 $1,544.25

4" x 4 S8104040 $1,788.50

5" x 3 S8105030 $2,504.25

5" x 4 S8105040 $1,993.75

5" x 5 S8105050 $2,094.75

6" x 3" S8106030 $2,105.75

6" x 4 S8106040 $2,125.75

6" x 5 S8106050 $2,542.50

6" x 6 S8106060 $2,640.00

8" x 5 S8108050 $2,708.25

8" x 6 S8108060 $2,855.50

8" x 8 S8108080 $4,914.00

10" x 6 S8101060 $5,102.00

10" x 8 S8101080 $5,544.75

10" x 10 S8101010 $6,681.25

12" x 8 S8101280 $6,996.00

12" X 10 S8101210 $7,908.50

12" X 12 S8101212 $10,999.75

14" X 10 S8101410 $10,237.25

14" X 12 S8101412 $11,435.50

14" X 14 S8101414 $13,886.75

16" X 14 S8101614 $14,292.75

Note:Items listed in shaded areas are non-cancelable and non-returnable.

#CB800 Solder x Solder - Circuit Balancing ValveSize Part # List Price

1⁄2 CB8000501 $48.50

3⁄4 CB8000751 $51.25

1 CB8001001 $69.50

11⁄4 CB8001251 $107.75

11⁄2 CB8001501 $124.50

2 CB8002001 $186.50

Page 50: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 50 –

Grinnell Mechanical Grooved ProductsSection 5 - Accessories

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#CB800 Flange x Flange - Circuit Balancing ValveSize Part # List Price

21⁄2 CB8002503 $473.25

3 CB8003003 $723.25

4 CB8004003 $997.50

5 CB8005003 $1,785.25

6 CB8006003 $2,283.00

8 CB8008003 $4,934.25

10 CB8001103 $6,410.00

12 CB8001203 $13,421.50

#CB800 Thread x Thread - Circuit Balancing ValveSize Part # List Price

1⁄2 CB8005002 $47.00

3⁄4 CB8000752 $51.75

1 CB8001002 $70.75

11⁄4 CB8001252 $109.00

11⁄2 CB8001502 $126.25

2 CB8002002 $188.75

#CB800 Groove x Groove - Circuit Balancing ValveSize Part # List Price

21⁄2 CB8002504 $408.50

3 CB8003004 $636.50

4 CB8004004 $880.50

5 CB8005004 $1,594.25

6 CB8006004 $2,135.50

8 CB8008004 $4,551.50

10 CB8001104 $5,971.75

12 CB8001204 $12,978.25

Page 51: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 51 –

Grinnell Mechanical Grooved ProductsSection 6 - Grooved Copper Systems

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

672 Rigid Couplings W/ Grade EN Tri-Seal Gasket

Nom. Size Part Number List Price

2 67220EN3 $25.00

21⁄2 67225EN3 $28.50

3 67230EN3 $31.75

4 67240EN3 $48.50

5 67250EN3 $83.30

6 67260EN3 $110.00

8 67280EN3 $171.25

Replacement Gaskets - Grade EN Tri-Seal(for #672 Coupling)

Nom. Size Part Number List Price

2 20EN3 $13.00

21⁄2 25EN3 $16.50

3 30EN3 $18.50

4 40EN3 $23.00

5 50EN3 $33.50

6 60EN3 $36.25

8 80EN3 $51.75

61 Flange AdapterW/ Grade EN EPDM Gasket

Nom. Size Part Number List Price

2 6120EN $200.25

21⁄2 6125EN $208.50

3 6130EN $218.25

4 6140EN $239.50

5 6150EN $322.50

6 6160EN $351.25

Replacement Gaskets - Grade EN EPDM(for #61 Flange Adapter)

Nom. Size Part Number List Price

2 6120NSF $16.00

21⁄2 6125NSF $17.75

3 6130NSF $19.50

4 6140NSF $25.00

5 6150NSF $31.00

6 6160NSF $35.75

Phenolic Washer(for #61 Flange Adapter)

Nom. Size Part Number List Price

2 61PW20 $22.00

21⁄2 61PW25 $23.75

3 61PW30 $25.75

4 61PW40 $41.00

5 61PW50 $45.25

6 61PW60 $51.00

Page 52: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 52 –

Grinnell Mechanical Grooved ProductsSection 6 - Grooved Copper Systems

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#610 Grooved 90º ElbowNom. Size Part Number List Price

2 61020S $43.00

21⁄2 61025S $46.75

3 61030S $65.75

4 61040S $153.00

5 61050S $436.50

6 61060S $697.25

8 61080S $1,310.25

#601 Grooved 45º ElbowNom. Size Part Number List Price

2 64520S $43.00

21⁄2 64525S $46.75

3 64530S $65.75

4 64540S $153.00

5 64550S $436.50

6 64560S $697.25

8 64580S $1,310.25

#619 TeeNom. Size Part Number List Price

2 61920S $71.50

21⁄2 61925S $76.00

3 61930S $113.50

4 61940S $250.25

5 61950S $703.50

6 61960S $869.75

8 61980S $1,554.25

#660 CapNom. Size Part Number List Price

2 66020S $29.50

21⁄2 66025S $43.75

3 66030S $55.25

4 66040S $83.00

5 66050S $94.25

6 66060S $171.50

8 66080S $326.25

Page 53: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 53 –

Grinnell Mechanical Grooved ProductsSection 6 - Grooved Copper Systems

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#650 Grooved Concentric ReducerNom. Size Part Number List Price

21⁄2 x 2 6502520 $62.25

3 x 2 6503020 $62.25

3 x 21⁄2 6503025 $62.25

4 x 2 6504020 $128.75

4 x 21⁄2 6504025 $128.75

4 x 3 6504030 $128.75

5 x 3 6505030 $364.75

5 x 4 6505040 $364.75

6 x 3 6506030 $394.75

6 x 4 6506040 $394.75

6 x 5 6506050 $394.75

8 x 6 6508060 $694.25

#652 Grooved ReducerGrooved X Wrot

Nom. Size Part Number List Price

2 x 1 6522010W $51.50

2 x 11⁄4 6522013W $51.50

2 x 11⁄2 6522015W $51.50

21⁄2 x 1 6522510W $63.25

21⁄2 x 11⁄4 6522513W $63.25

21⁄2 x 11⁄2 6522515W $63.25

21⁄2 x 2 6522520W $63.25

3 x 11⁄2 6523015W $78.50

3 x 2 6523020W $78.50

4 x 2 6524020W $147.25

#621 Reducing TeeGrooved x Grooved x Grooved

Nom. Size Part Number List Price

21⁄2 x 21⁄2 x 2 6212520 $114.00

3 x 3 x 2 6213020 $146.75

3 x 3 x 21⁄2 6213025 $193.75

4 x 4 x 2 6214020 $329.75

4 x 4 x 21⁄2 6214025 $329.75

4 x 4 x 3 6214030 $329.75

5 x 5 x 3 6215030 $1,008.75

5 x 5 x 4 6215040 $1,008.75

6 x 6 x 21⁄2 6216025 $1,232.25

6 x 6 x 3 6216030 $1,232.25

6 x 6 x 4 6216040 $1,232.25

6 x 6 x 5 6216050 $1,232.25

Page 54: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 54 –

Grinnell Mechanical Grooved ProductsSection 6 - Grooved Copper Systems

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#618 Reducing TeeGrooved x Grooved x Wrot

Nom. Size Part Number List Price

2 x 2 x 3⁄4 61820075WA $91.50

2 x 2 x 1 6182010WA $91.50

2 x 2 x 11⁄4 6182013WA $91.50

2 x 2 x 11⁄2 6182015WA $91.50

21⁄2 x 21⁄2 x 3⁄4 61825075WA $117.25

21⁄2 x 21⁄2 x 1 6182510WA $114.25

21⁄2 x 21⁄2 x 11⁄4 6182513WA $114.25

21⁄2 x 21⁄2 x 11⁄2 6182515WA $114.25

3 x 3 x 3⁄4 61830075WA $212.25

3 x 3 x 1 6183010WA $212.25

3 x 3 x 11⁄4 6183013WA $212.25

3 x 3 x 11⁄2 6183015WA $212.25

4 x 4 x 3⁄4 61840075WA $250.75

4 x 4 x 1 6184010WA $329.75

4 x 4 x 11⁄4 6184013WA $329.75

4 x 4 x 11⁄2 6184015WA $329.75

#407GG Dielectric Waterway Transition Fitting Grooved x Grooved IPS x CTS Size Part Number List Price

2 41480 $78.75

21⁄2 41474 $88.75

3 41475 $136.75

4 41476 $274.75

5 41477 $307.25

6 41478 $380.75

NoteItems listed in shaded areas are non-cancelable and non-returnable.

#407GT Dielectric WaterwayGroove x Thread

Nom.Size Painted List Price

1 41465 $29.00

11⁄4" x 4 41466 $38.75

11⁄2" x 4 41467 $45.00

2" x 4 41468 $46.00

21⁄2" x 6 41469 $62.75

3" x 6 41470 $113.75

4" x 6 41472 $152.75

#407T Dielectric WaterwayMale Thread x Male Thread

Nom.Size Painted List Price1⁄2" x 3 41455 $15.25 3⁄4" x 3 41456 $15.25

1" x 4 41457 $23.00

11⁄4" x 4 41458 $33.50

11⁄2" x 4 41459 $40.25

2" x 4 41460 $46.00

21⁄2" x 6 41461 $62.75

3" x 6 41462 $113.75

4" x 6 41464 $152.75

#B680 Copper System Butterfly ValveGrooved, EPDM

Size Part Number List Price

2 68020EL $391.50

21⁄2 68025EL $483.00

3 68030EL $530.00

4 68040EL $671.25

5 68050EL $853.25

6 68060EL $912.25

Roll Groover Mini-Mite 2"-8" Copper TubeModel #1039-66

Ratchet Hand Crank or Chucked into a Rigid 300Nom. Size Part Number List Price

2"-8" 41047 $745.00

Page 55: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 55 –

Grinnell Mechanical Grooved ProductsSection 7 - Stainless Steel System

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#472 Rigid Coupling 316 S.S.w/ Grade "E" or Grade "T" Nitrile Gasket

Nom.Size

Part Number ListPriceGrade “E” EPDM Grade “T” Nitrile

11⁄4 47213E 47213T $91.75

11⁄2 47215E 47215T $91.75

2 47220E 47220T $103.00

21⁄2 47225E 47225T $112.75

3 47230E 47230T $126.50

4 47240E 47240T $159.25

5 47250E 47250T $369.75

6 47260E 47260T $369.75

8 47280E 47280T $772.25

10 47210E 47210T $910.00

12 47212E 47212T $1,281.00

#472 Rigid Coupling 316 S.S.w/ Grade "E" or Grade "T" Nitrile Tri-seal Gasket

Nom.Size

Part Number ListPriceGrade “E” EPDM Grade “T” Nitrile

11⁄4 47213E3 47213T3 $104.00

11⁄2 47215E3 47215T3 $104.00

2 47220E3 47220T3 $119.75

21⁄2 47225E3 47225T3 $128.25

3 47230E3 47230T3 $141.00

4 47240E3 47240T3 $180.25

5 47250E3 47250T3 $417.50

6 47260E3 47260T3 $417.50

8 47280E3 47280T3 $811.75

10 47210E3 47210T3 $961.00

12 47212E3 47212T3 $1,343.50

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 56: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 56 –

Grinnell Mechanical Grooved ProductsSection 7 - Stainless Steel System

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#405 Flexible Coupling 316 S.S.w/ Grade "E" or Grade "T" Nitrile Gasket

Nom.Size

Part Number ListPriceGrade “E” EPDM Grade “T” Nitrile

1 40501E 40501T $70.25

11⁄4 40513E 40513T $82.50

11⁄2 40515E 40515T $91.75

2 40520E 40520T $103.00

21⁄2 40525E 40525T $112.75

3 40530E 40530T $126.50

4 40540E 40540T $159.25

5 40550E 40550T $560.25

6 40560E 40560T $560.25

8 40580E 40580T $1,098.00

#405 Flexible Coupling 316 S.S.w/Grade "E" or Grade"T" Nitrile Tri-Seal Gasket

Nom.Size

Part Number ListPriceGrade “E” EPDM Grade “T” Nitrile

11⁄4 40513E3 40513T3 $103.75

11⁄2 40515E3 40515T3 $103.75

2 40520E3 40520T3 $119.75

21⁄2 40525E3 40525T3 $128.25

3 40530E3 40530T3 $141.00

4 40540E3 40540T3 $180.25

5 40550E3 40550T3 $609.50

6 40560E3 40560T3 $609.50

8 40580E3 40580T3 $1,139.00

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 57: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 57 –

Grinnell Mechanical Grooved ProductsSection 7 - Stainless Steel System

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#410 90° Elbow304 S.S. & 316 S.S., Sch. 10

Nom. Size

304 S.S. 316 S.S. Part Number List Price Part Number List Price

1 410014 $134.50 410016 $150.00

11⁄4 410134 $120.25 410136 $181.50

11⁄2 410154 $55.75 410156 $58.25

2 410204 $62.55 410206 $65.75

21⁄2 410254 $85.25 410256 $89.25

3 410304 $86.00 410306 $106.75

4 410404 $123.25 410406 $154.00

5 410504 $842.75 410506 POA

6 410604 $327.00 410606 $408.25

8 410804 $569.00 410806 $711.00

10 410104 $1,124.25 410106 $1,405.25

12 410124 $1,763.00 410126 $2,203.25

NoteItems listed in shaded areas are non-cancelable and non-returnable.

#401 45° Elbow, 304 S.S. & 316 S.S., Sch. 10

Nom. Size

304 S.S. 316 S.S. Part Number List Price Part Number List Price

1 401014 $131.25 401016 $150.50

11⁄4 401134 $173.25 401136 $194.50

11⁄2 401154 $43.25 401156 $52.75

2 401204 $48.00 401206 $58.25

21⁄2 401254 $66.25 401256 $77.75

3 401304 $79.00 401306 $98.75

4 401404 $113.75 401406 $142.00

5 401504 $585.50 401506 POA

6 401604 $216.00 401606 $269.75

8 401804 $369.50 401806 $462.00

10 401104 $865.75 401106 $1,012.00

12 401124 $1,194.50 401126 $1,493.50

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 58: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 58 –

Grinnell Mechanical Grooved ProductsSection 7 - Stainless Steel System

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#419 Tee, 304 S.S. & 316 S.S., Sch. 10

Nom. Size

304 S.S. 316 S.S. Part Number List Price Part Number List Price

1 419014 $172.75 419016 $180.00

11⁄4 419134 $203.25 419136 $247.50

11⁄2 419154 $144.00 419156 $168.50

2 419204 $150.50 419206 $176.00

21⁄2 419254 $183.25 419256 $215.00

3 419304 $222.75 419306 $278.50

4 419404 $238.25 419406 $298.75

5 419504 $498.25 419506 POA

6 419604 $465.50 419606 $581.75

8 419804 $687.25 419806 $859.00

10 419104 $911.75 419106 $1,139.75

12 419124 $1,374.25 419126 $1,717.75

NoteItems listed in shaded areas are non-cancelable and non-returnable.

#460 Cap, 304 S.S. & 316 S.S., Sch. 10

Nom. Size

304 S.S. 316 S.S. Part Number List Price Part Number List Price

1 460014 $70.75 460016 $81.50

11⁄4 460134 $75.00 460136 $86.25

11⁄2 460154 $78.00 460156 $90.00

2 460204 $108.00 460206 $124.25

21⁄2 460254 $112.50 460256 $129.00

3 460304 $202.75 460306 $156.50

4 460404 $260.00 460406 $200.25

6 460604 $310.25 460606 $239.00

8 460804 $733.25 460806 $565.25

10 460104 $1,009.25 460106 $740.75

12 460124 $1,272.75 460126 $861.75

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 59: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 59 –

Grinnell Mechanical Grooved ProductsSection 7 - Stainless Steel System

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#421 Reducing Tee, 304 S.S. & 316 S.S., Sch. 10

Nom. Size

304 S.S. 316 S.S. Part Number List Price Part Number List Price

11⁄2 x 11⁄2 x 3⁄4 421150754 $148.75 421150756 $210.00

11⁄2 x 11⁄2 x 1 42115104 $152.25 42115106 $183.00

11⁄2 x 11⁄2 x 11⁄4 42115134 $155.25 42115136 $187.25

2 x 2 x 3⁄4 421200754 $160.00 421200756 $193.00

2 x 2 x 1 42120104 $163.75 42120106 $193.00

2 x 2 x 11⁄4 42120134 $180.50 42120136 $250.50

2 x 2 x 11⁄2 42120154 $207.75 42120156 $250.50

21⁄2 x 21⁄2 x 1 42125104 $208.50 42125106 $251.50

2 1⁄2 x 2 1⁄2 x 11⁄2 42125154 $235.50 42125156 $258.00

21⁄2 x 21⁄2 x 2 42125204 $222.75 42125206 $226.00

3 x 3 x 3⁄4 421300754 $188.00 421300756 $225.50

3 x 3 x 1 42130104 $208.75 42130106 $231.75

3 x 3 x 11⁄4 42130134 $247.50 42130136 $295.50

3 x 3 x 11⁄2 42130154 $258.00 42130156 $309.75

3 x 3 x 2 42130204 $275.75 42130206 $330.75

3 x 3 x 21⁄2 42130254 $265.50 42130256 $332.00

4 x 4 x 2 42140204 $312.50 42140206 $374.50

4 x 4 x 21⁄2 42140254 $335.25 42140256 $400.25

4 x 4 x 3 42140304 $366.75 42140306 $458.25

6 x 6 x 3 42160304 $473.50 42160306 $591.75

6 x 6 x 4 42160404 $587.75 42160406 $701.50

8 x 8 x 4 42180404 $562.25 42180406 $658.50

8 x 8 x 6 42180604 $737.25 42180606 $886.50

10 x 10 x 6 42110604 $899.75 42110606 $1,124.75

10 x 10 x 8 42110804 $907.50 42110806 $1,066.75

12 x 12 x 8 42112804 $1,296.25 42112806 $1,621.25

12 x 12 x 10 42112104 $1,550.00 42112106 $1,937.50

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 60: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 60 –

Grinnell Mechanical Grooved ProductsSection 7 - Stainless Steel System

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

#450 Concentric Reducer, 304 S.S. & 316 S.S., Sch. 10

Nom. Size

304 S.S. 316 S.S. Part Number List Price Part Number List Price

11⁄2 x 11⁄4 45015134 $119.00 45015136 $130.00

2 x 1 45020104 $86.25 45020106 $102.25

2 x 11⁄2 45020154 $107.50 45020156 $118.00

21⁄2 x 2 45025204 $118.75 45025206 $148.00

3 x 1 45030104 $249.50 45030106 $326.00

3 x 2 45030204 $77.25 45030206 $114.50

3 x 21⁄2 45030254 $63.00 45030256 $78.50

4 x 2 45040204 $103.25 45040206 $180.75

4 x 21⁄2 45040254 $142.00 45040256 $267.50

4 x 3 45040304 $73.00 45040306 $91.00

5 x 3 45050304 $516.75 45050306 $599.25

5 x 4 45050404 $440.00 45050406 $511.50

6 x 2 45060204 $1,179.25 45060206 $1,245.75

6 x 21⁄2 45060254 $1,198.50 45060256 $1,515.25

6 x 3 45060304 $238.50 45060306 $297.75

6 x 4 45060404 $180.75 45060406 $226.00

8 x 3 45080304 $1,591.50 45080306 $1,909.75

8 x 4 45080404 $180.75 45080406 $226.00

8 x 6 45080604 $456.75 45080606 $570.75

10 x 4 45010404 $1,496.75 45010406 $1,798.50

10 x 6 45010604 $1,080.00 45010606 $1,350.00

10 x 8 45010804 $1,206.50 45010806 $1,516.00

12 x 6 45012604 $2,302.25 45012606 $2,680.50

12 x 8 45012804 $1,644.25 45012806 $2,055.50

12 x 10 45012104 $1,510.75 45012106 $1,888.25

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 61: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 61 –

Grinnell Mechanical Grooved ProductsSection 7 - Stainless Steel System

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n#451 Eccentric Reducer, 304 S.S. & 316 S.S., Sch. 10

Nom. Size

304 S.S. 316 S.S. Part Number List Price Part Number List Price

11⁄2 x 11⁄4 45115134 $411.25 45115136 $471.75

2 x 1 45120104 $411.25 45120106 $471.75

2 x 11⁄2 45120154 $267.00 45120156 $306.25

21⁄2 x 2 45125204 $325.00 45125206 $383.75

3 x 1 45130104 $527.25 45130106 $642.00

3 x 2 45130204 $328.50 45130206 $358.25

3 x 21⁄2 45130254 $334.50 45130256 $384.25

4 x 2 45140204 $882.25 45140206 $1,229.00

4 x 21⁄2 45140254 $410.50 45140256 $697.75

4 x 3 45140304 $684.00 45140306 $854.50

5 x 3 45150304 $563.75 45150306 $636.25

5 x 4 45150404 $580.00 45150406 $657.75

6 x 2 45160204 $1,233.25 45160206 $1,451.25

6 x 21⁄2 45160254 $1,199.25 45160256 $1,379.75

6 x 3 45160304 $817.50 45160306 $1,005.25

6 x 4 45160404 $722.00 45160406 $1,056.75

8 x 3 45180304 $1,863.75 45180306 $2,429.00

8 x 4 45180404 $2,083.75 45180406 $3,235.00

8 x 6 45180604 $998.00 45180606 $1,005.75

10 x 6 45110604 $2,765.50 45110606 $4,117.25

10 x 8 45110804 $2,368.00 45110806 $3,669.25

12 x 6 45112604 $2,844.50 45112606 $3,555.75

12 x 8 45112804 $3,777.50 45112806 $4,836.75

12 x 10 45112104 $3,228.00 45112106 $4,251.75

NoteItems listed in shaded areas are non-cancelable and non-returnable.

Page 62: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 62 –

Grinnell Mechanical Grooved ProductsSection 8 - Miscellaneous

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Portable Roll GrooversModel 1112

1" - 12" Sch 40 pipe, 11⁄2 H.P., 110 V. 41048 $6,545.00

Model 10121" - 12" Sch 40 pipe, for use with Rigid® 300. 41041 $3,632.00

Model 1022

11⁄4" - 16" pipe, for use with Rigid® 300 41027 $8,176.00

Model 10411" - 6" Sch 40, 1" - 12" Sch 10, Copper Tube 2" - 6", for use with Rigid® 300. 41018 $2,544.00

Model 1010

1 1/2" - 6" Sch 40, 11⁄2" - 12" Sch 10 pipe, 11⁄2 H.P., 110 V. 41030 $6,530.00

Model 1023

11⁄4" - 12" Sch 40, 12" - 24" Std Wall .375, 11⁄2 H.P. 110 V. 41029 $9,679.00

Nipple Bracket Model 4037Fits Model 1021, 1022, 1023, 2021 41035 $485.00

Automated Roll GrooversModel 2021

11⁄4" - 12" Sch 40, 12" -24" Std Wall .375, 3 H.P., 220 V, 3 Ph. 41032 $18,115.00

Page 63: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 63 –

Grinnell Mechanical Grooved ProductsSection 8 - Miscellaneous

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

nRoll Groover EquipmentPorta-Bore Model 3013

11⁄4" - 12" pipe, cuts up to 41⁄2" dia. Holes. Includes Chain Clamp. 41049 $2,006.00

Pipe Stands

Model 40311" - 4" pipe, 600 pounds max., 2 roller bearings. 41037 $388.00

Model 40002" - 8" pipe, 900 pounds max., 4 roller bearings. 41038 $480.00

Model 40332" - 14" pipe, 1,200 pounds max., 2 columns, 6 roller bearings. 41039 $601.00

Mini-Mites™

Model 1039-66

11⁄4" - 6" Sch 40 pipe, 2" - 8" Copper Tube Includes hand crank, can adapt to Rigid® 300. 41047

$745.00

Model 1034

11⁄4" - 6" Sch 40 pipe, for use with Rigid® 300. 41015 $554.00

Model 10662" - 8" Copper, for use with Rigid® 300. 41014 $554.00

Page 64: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 64 –

Grinnell Mechanical Grooved ProductsSection 8 - Miscellaneous

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Grooved Fittings - Pieces Per Carton/CaseNom.Size #705 Flex Cp #707 HD Flex Cp #772 Rigid Cp #210 90* El #201 45* El #219 Tee

11⁄4 32 - 32 40 45 28

11⁄2 32 480 28 27 39 28

2 480 385 385 18 24 24

21⁄2 350 350 350 8 15 10

3 270 240 240 12 18 12

4 175 150 150 168 288 46

5 96 80 100 105 140 75

6 80 64 80 63 90 48

8 48 36 44 28 48 24

10 24 60 24 N/A N/A N/A

12 20 20 20 N/A N/A N/A

14 - 36 - - - -

16 - 9 - - - -

18 - 6 - - - -

20 - N/A - - - -

24 - N/A - - - -

Page 65: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 65 –

Grinnell Mechanical Grooved ProductsSection 9 - Index

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

01EPDME thru 10EPDME3 . . . . 13

10FLUORO. . . . . . . . . . . . . . . . . 14

10NITRILS thru 10NITRILS3 . . . 13

10SILICONE. . . . . . . . . . . . . . . . 14

12EPDME thru 12EPDME3 . . . . 13

12FLUORO. . . . . . . . . . . . . . . . . 14

12NITRILS thru 12NITRILS3 . . . 13

12SILICONE. . . . . . . . . . . . . . . . 14

13EPDME thru 13EPDME3 . . . . 13

13FLUORO. . . . . . . . . . . . . . . . . 14

13NITRILS thru 13NITRILS3 . . . 13

13SILICONE. . . . . . . . . . . . . . . . 14

14EPDME. . . . . . . . . . . . . . . . . . 13

14FLUORO. . . . . . . . . . . . . . . . . 14

14NITRILS . . . . . . . . . . . . . . . . . 13

14SILICONE. . . . . . . . . . . . . . . . 14

15EPDME thru 15EPDME3 . . . . 13

15FLUORO. . . . . . . . . . . . . . . . . 14

15NITRILS thru 15NITRILS3 . . . 13

15SILICONE. . . . . . . . . . . . . . . . 14

16EPDME. . . . . . . . . . . . . . . . . . 13

16FLUORO. . . . . . . . . . . . . . . . . 14

16NITRILS . . . . . . . . . . . . . . . . . 13

16SILICONE. . . . . . . . . . . . . . . . 14

18EPDME thru 18NITRILS. . . . . 13

20EN3 . . . . . . . . . . . . . . . . . . . . 51

20EPDME thru 20EPDME3 . . . . 13

20FLUORO. . . . . . . . . . . . . . . . . 14

20NITRILS thru 20NITRILS3 . . . 13

20SILICONE. . . . . . . . . . . . . . . . 14

21EPDME thru 24NITRILS. . . . . 13

25EN3 . . . . . . . . . . . . . . . . . . . . 51

25EPDME thru 25EPDME3 . . . . 13

25FLUORO. . . . . . . . . . . . . . . . . 14

25NITRILS thru 25NITRILS3 . . . 13

25SILICONE. . . . . . . . . . . . . . . . 14

30EN3 . . . . . . . . . . . . . . . . . . . . 51

30EPDME thru 30EPDME3 . . . . 13

30FLUORO. . . . . . . . . . . . . . . . . 14

30NITRILS thru 30NITRILS3 . . . 13

30SILICONE. . . . . . . . . . . . . . . . 14

40EN3 . . . . . . . . . . . . . . . . . . . . 51

40EPDME thru 40EPDME3 . . . . 13

40FLUORO . . . . . . . . . . . . . . . . 14

40NITRILS thru 40NITRILS3 . . . 13

40SILICONE. . . . . . . . . . . . . . . . 14

50EN3 . . . . . . . . . . . . . . . . . . . . 51

50EPDME thru 50EPDME3 . . . . 13

50FLUORO . . . . . . . . . . . . . . . . 14

50NITRILS thru 50NITRILS3 . . . 13

50SILICONE. . . . . . . . . . . . . . . . 14

60EN3 . . . . . . . . . . . . . . . . . . . . 51

60EPDME thru 60EPDME3 . . . . 13

60FLUORO . . . . . . . . . . . . . . . . 14

60NITRILS thru 60NITRILS3 . . . 13

60SILICONE. . . . . . . . . . . . . . . . 14

61PW20 thru 80EN3 . . . . . . . . . 51

80EPDME thru 80EPDME3 . . . . 13

80FLUORO . . . . . . . . . . . . . . . . 14

80NITRILS thru 80NITRILS3 . . . 13

80SILICONE. . . . . . . . . . . . . . . . 14

730EGS-1 thru 730TGS-9 . . . . . 45

2015EPDME thru 6050NITRILS . . . . . . . . . . . . . . . 14

6120EN thru 6160NSF . . . . . . . 51

7110EPDME thru 7110FW. . . . . 15

7110GS . . . . . . . . . . . . . . . . . . . 12

7110NITRILS . . . . . . . . . . . . . . . 15

7110S thru 7110TS . . . . . . . . . . 12

7112EPDME thru 7112FW. . . . . 15

7112GS . . . . . . . . . . . . . . . . . . . 12

7112NITRILS . . . . . . . . . . . . . . . 15

7112S thru 7112TS . . . . . . . . . . 12

7120EPDME thru 7120FW. . . . . 15

7120GS . . . . . . . . . . . . . . . . . . . 12

7120NITRILS . . . . . . . . . . . . . . . 15

7120S thru 7120TS . . . . . . . . . . 12

7125EPDME thru 7125FW. . . . . 15

7125GS . . . . . . . . . . . . . . . . . . . 12

7125NITRILS . . . . . . . . . . . . . . . 15

7125S thru 7125TS . . . . . . . . . . 12

7130EPDME thru 7130FW. . . . . 15

7130GS . . . . . . . . . . . . . . . . . . . 12

7130NITRILS . . . . . . . . . . . . . . . 15

7130S thru 7130TS . . . . . . . . . . 12

7140EPDME thru 7140FW. . . . . 15

7140GS . . . . . . . . . . . . . . . . . . . 12

7140NITRILS . . . . . . . . . . . . . . . 15

7140S thru 7140TS . . . . . . . . . . 12

7150EPDME thru 7150FW. . . . . 15

7150GS . . . . . . . . . . . . . . . . . . . 12

7150NITRILS . . . . . . . . . . . . . . . 15

7150S thru 7150TS . . . . . . . . . . 12

7160EPDME thru 7160FW. . . . . 15

7160GS . . . . . . . . . . . . . . . . . . . 12

7160NITRILS . . . . . . . . . . . . . . . 15

7160S thru 7160TS . . . . . . . . . . 12

7180EPDME thru 7180FW. . . . . 15

7180GS . . . . . . . . . . . . . . . . . . . 12

7180NITRILS . . . . . . . . . . . . . . . 15

7180S thru 7180TS . . . . . . . . . . 12

8060EPDME thru8060NITRILS . . . . . . . . . . . . . . . 14

20110GS thru 20180S . . . . . . . . 17

21010GS thru 21080S . . . . . . . . 16

21910GS thru 21980S . . . . . . . . 19

26001GS thru 26080TS . . . . . . . 36

32005 thru 32038 . . . . . . . . . . . . 15

40501E thru 40580T3 . . . . . . . . 56

41014 thru 41015 . . . . . . . . . . . . 63

41018 thru 41035 . . . . . . . . . . . . 62

41037 thru 41039 . . . . . . . . . . . . 63

41041 . . . . . . . . . . . . . . . . . . . . . 62

41047 . . . . . . . . . . . . . . . . . . . . . 54

41047 . . . . . . . . . . . . . . . . . . . . . 63

41048 . . . . . . . . . . . . . . . . . . . . . 62

41049 . . . . . . . . . . . . . . . . . . . . . 63

Page 66: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 66 –

Grinnell Mechanical Grooved ProductsSection 9 - Index

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page41455 thru 41480 . . . . . . . . . . . . 54

47210E thru 47280T3 . . . . . . . . . 55

50240 thru 50248 . . . . . . . . . . . . 15

61020S thru 66080S . . . . . . . . . . 52

67220EN3 thru 67280EN3 . . . . 51

68020EL thru 68060EL . . . . . . . . 54

70510E3GS thru 70510ES . . . . . . 8

70510LGS thru 70510OS. . . . . . . 9

70510T3GS thru 70512ES . . . . . . 8

70512LGS thru 70512OS. . . . . . . 9

70512T3GS thru 70513ES . . . . . . 8

70513LGS thru 70513OS. . . . . . . 9

70513T3GS thru 70515ES . . . . . . 8

70515LGS thru 70515OS. . . . . . . 9

70515T3GS thru 70520ES . . . . . . 8

70520LGS thru 70520OS. . . . . . . 9

70520T3GS thru 70525ES . . . . . . 8

70525LGS thru 70525OS. . . . . . . 9

70525T3GS thru 70530ES . . . . . . 8

70530LGS thru 70530OS. . . . . . . 9

70530T3GS thru 70540ES . . . . . . 8

70540LGS thru 70540OS. . . . . . . 9

70540T3GS thru 70550ES . . . . . . 8

70550LGS thru 70550OS. . . . . . . 9

70550T3GS thru 70560ES . . . . . . 8

70560LGS thru 70560OS. . . . . . . 9

70560T3GS thru 70580ES . . . . . . 8

70580LGS thru 70580OS. . . . . . . 9

70580T3GS thru 70580TS . . . . . . 8

70701EGS thru 70710ES . . . . . . 10

70710LS thru 70710OS . . . . . . . 11

70710T3GS thru 70712ES . . . . . 10

70712LS thru 70712OS . . . . . . . 11

70712T3GS thru 70714ES . . . . . 10

70714LS thru 70714OS . . . . . . . 11

70714TGS thru 70715ES . . . . . . 10

70715LS thru 70715OS . . . . . . . 11

70715T3GS thru 70716ES . . . . . 10

70716LS thru 70716OS . . . . . . . 11

70716TGS thru 70720ES . . . . . . 10

70720LS thru 70720OS . . . . . . . 11

70720T3GS thru 70725ES . . . . . 10

70725LS thru 70725OS . . . . . . . 11

70725T3GS thru 70730ES . . . . . 10

70730LS thru 70730OS . . . . . . . 11

70730T3GS thru 70740ES . . . . . 10

70740LS thru 70740OS . . . . . . . 11

70740T3GS thru 70750ES . . . . . 10

70750LS thru 70750OS . . . . . . . 11

70750T3GS thru 70760ES . . . . . 10

70760LS thru 70760OS . . . . . . . 11

70760T3GS thru 70780ES . . . . . 10

70780LS thru 70780OS . . . . . . . 11

70780T3GS thru 70780TS . . . . . 10

72031 thru 72036 . . . . . . . . . . . . 35

72037 . . . . . . . . . . . . . . . . . . . . . 34

72038 . . . . . . . . . . . . . . . . . . . . . 38

72039 . . . . . . . . . . . . . . . . . . . . . 39

72040 . . . . . . . . . . . . . . . . . . . . . 40

72601 thru 72614 . . . . . . . . . . . . 32

72620 thru 72623 . . . . . . . . . . . . 31

72645 thru 72677 . . . . . . . . . . . . 16

72680 thru 72699 . . . . . . . . . . . . 31

72850 thru 72896 . . . . . . . . . . . . 27

72897 thru 72915 . . . . . . . . . . . . 28

72918 . . . . . . . . . . . . . . . . . . . . . 27

72920 thru 72933 . . . . . . . . . . . . 28

72939 thru 72963 . . . . . . . . . . . . 29

73230 thru 73264 . . . . . . . . . . . . 37

73392 thru 73425 . . . . . . . . . . . . 27

73500 thru 73512 . . . . . . . . . . . . 18

73513 . . . . . . . . . . . . . . . . . . . . . 16

73513 . . . . . . . . . . . . . . . . . . . . . 18

73514 . . . . . . . . . . . . . . . . . . . . . 16

73514 . . . . . . . . . . . . . . . . . . . . . 18

73515 . . . . . . . . . . . . . . . . . . . . . 16

73515 . . . . . . . . . . . . . . . . . . . . . 18

73516 . . . . . . . . . . . . . . . . . . . . . 16

73516 . . . . . . . . . . . . . . . . . . . . . 18

73517 . . . . . . . . . . . . . . . . . . . . . 16

73517 . . . . . . . . . . . . . . . . . . . . . 18

73518 thru 73519 . . . . . . . . . . . . 19

73520 . . . . . . . . . . . . . . . . . . . . . 17

73520 thru 73531 . . . . . . . . . . . . 19

73532 . . . . . . . . . . . . . . . . . . . . . 17

73532 . . . . . . . . . . . . . . . . . . . . . 19

73533 . . . . . . . . . . . . . . . . . . . . . 17

73533 . . . . . . . . . . . . . . . . . . . . . 19

73534 . . . . . . . . . . . . . . . . . . . . . 17

73534 . . . . . . . . . . . . . . . . . . . . . 19

73535 . . . . . . . . . . . . . . . . . . . . . 17

73535 . . . . . . . . . . . . . . . . . . . . . 19

73536 . . . . . . . . . . . . . . . . . . . . . 17

73536 . . . . . . . . . . . . . . . . . . . . . 19

73537 thru 73539 . . . . . . . . . . . . 18

73540 thru 73562 . . . . . . . . . . . . 23

73563 thru 73572 . . . . . . . . . . . . 19

73574 thru 73579 . . . . . . . . . . . . 24

73580 thru 73588 . . . . . . . . . . . . 25

73589 thru 73600 . . . . . . . . . . . . 24

73608 thru 73611 . . . . . . . . . . . . 25

73620 thru 73634 . . . . . . . . . . . . 24

73635 thru 73654 . . . . . . . . . . . . 25

73655 thru 73685 . . . . . . . . . . . . 26

73686 thru 73692 . . . . . . . . . . . . 25

73693 thru 73727 . . . . . . . . . . . . 26

73728 thru 73746 . . . . . . . . . . . . 35

73747 thru 73750 . . . . . . . . . . . . 27

73751 thru 73754 . . . . . . . . . . . . 28

73755 thru 73767 . . . . . . . . . . . . 27

73768 thru 73789 . . . . . . . . . . . . 28

73790 thru 73802 . . . . . . . . . . . . 30

73803 thru 73811 . . . . . . . . . . . . 36

73812 thru 73817 . . . . . . . . . . . . 28

73818 thru 73844 . . . . . . . . . . . . 29

73845 thru 73856 . . . . . . . . . . . . 28

73860 thru 73901 . . . . . . . . . . . . 29

Page 67: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 67 –

Grinnell Mechanical Grooved ProductsSection 9 - Index

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

73902 thru 73910 . . . . . . . . . . . . 32

73911 thru 73956 . . . . . . . . . . . . 33

73957 thru 73999 . . . . . . . . . . . . 35

74207 thru 74239 . . . . . . . . . . . . 34

74240 thru 74291 . . . . . . . . . . . . 37

74292 thru 74302 . . . . . . . . . . . . 30

74304 thru 74326 . . . . . . . . . . . . 31

74327 . . . . . . . . . . . . . . . . . . . . . 33

74328 . . . . . . . . . . . . . . . . . . . . . 27

74330 thru 74331 . . . . . . . . . . . . 31

74335 . . . . . . . . . . . . . . . . . . . . . 30

74405 thru 74408 . . . . . . . . . . . . 31

74672 thru 74692 . . . . . . . . . . . . 33

74700 thru 74705 . . . . . . . . . . . . 32

75098 thru 75108 . . . . . . . . . . . . 31

75121 thru 75133 . . . . . . . . . . . . 30

75148 thru 75158 . . . . . . . . . . . . 31

75300 thru 75328 . . . . . . . . . . . . 18

75408 thru 75409 . . . . . . . . . . . . 25

75410 thru 75449 . . . . . . . . . . . . 24

75450 thru 75460 . . . . . . . . . . . . 25

75461 . . . . . . . . . . . . . . . . . . . . . 24

75469 . . . . . . . . . . . . . . . . . . . . . 25

75470 thru 75486 . . . . . . . . . . . . 24

75488 . . . . . . . . . . . . . . . . . . . . . 36

75489 . . . . . . . . . . . . . . . . . . . . . 24

75490 thru 75495A. . . . . . . . . . . 23

75500 thru 75513 . . . . . . . . . . . . 25

75514 thru 75519 . . . . . . . . . . . . 26

75520 thru 75526 . . . . . . . . . . . . 25

75527 thru 75529 . . . . . . . . . . . . 26

75535 thru 75546 . . . . . . . . . . . . 25

75550 thru 75586 . . . . . . . . . . . . 17

75590 . . . . . . . . . . . . . . . . . . . . . 26

75670 thru 75696 . . . . . . . . . . . . 33

75700 thru 75712 . . . . . . . . . . . . 32

75730 thru 75732 . . . . . . . . . . . . 35

75734 . . . . . . . . . . . . . . . . . . . . . 34

75735 . . . . . . . . . . . . . . . . . . . . . 35

75736 thru 75737 . . . . . . . . . . . . 34

75738 thru 75742 . . . . . . . . . . . . 35

75746 . . . . . . . . . . . . . . . . . . . . . 34

75752 thru 75759 . . . . . . . . . . . . 35

75761 thru 75767 . . . . . . . . . . . . 23

75780 thru 75787 . . . . . . . . . . . . 18

75788 . . . . . . . . . . . . . . . . . . . . . 16

75788 . . . . . . . . . . . . . . . . . . . . . 18

75789 . . . . . . . . . . . . . . . . . . . . . 16

75789 . . . . . . . . . . . . . . . . . . . . . 18

75790 . . . . . . . . . . . . . . . . . . . . . 16

75790 . . . . . . . . . . . . . . . . . . . . . 18

75791 thru 75799 . . . . . . . . . . . . 19

75825 . . . . . . . . . . . . . . . . . . . . . 18

75826 . . . . . . . . . . . . . . . . . . . . . 16

75826 . . . . . . . . . . . . . . . . . . . . . 18

75827 . . . . . . . . . . . . . . . . . . . . . 16

75827 . . . . . . . . . . . . . . . . . . . . . 18

75828 . . . . . . . . . . . . . . . . . . . . . 17

75828 . . . . . . . . . . . . . . . . . . . . . 19

75829 . . . . . . . . . . . . . . . . . . . . . 17

75829 . . . . . . . . . . . . . . . . . . . . . 19

75830 . . . . . . . . . . . . . . . . . . . . . 17

75830 . . . . . . . . . . . . . . . . . . . . . 19

75832 . . . . . . . . . . . . . . . . . . . . . 17

75832 . . . . . . . . . . . . . . . . . . . . . 19

75840 thru 75853 . . . . . . . . . . . . 35

75901 thru 75916 . . . . . . . . . . . . 34

76051 thru 76082 . . . . . . . . . . . . 40

76502 thru 76541 . . . . . . . . . . . . 25

76587 . . . . . . . . . . . . . . . . . . . . . 28

76757 thru 76759 . . . . . . . . . . . . 35

76800 thru 76821 . . . . . . . . . . . . 30

76822 . . . . . . . . . . . . . . . . . . . . . 25

76825 thru 76839 . . . . . . . . . . . . 30

76840 thru 76871 . . . . . . . . . . . . 38

77001 thru 77009 . . . . . . . . . . . . 39

77010EGS thru 77010TS. . . . . . 12

77010 thru 77011 . . . . . . . . . . . . 39

77012EGS thru 77012TS. . . . . . 12

77012 thru 77019 . . . . . . . . . . . . 39

77020EGS thru 77020TS. . . . . . 12

77020 thru 77024 . . . . . . . . . . . . 39

77025EGS thru 77025TS. . . . . . 12

77025 thru 77029 . . . . . . . . . . . . 39

77030EGS thru 77030TS. . . . . . 12

77031 thru 77032 . . . . . . . . . . . . 39

77040EGS thru 77080TS. . . . . . 12

77210E3GS thru 77210ES. . . . . . 6

77210LGS thru 77210OS. . . . . . . 7

77210T3GS thru 77212ES. . . . . . 6

77212LGS thru 77212OS. . . . . . . 7

77212T3GS thru 77213ES. . . . . . 6

77213LGS thru 77213OS. . . . . . . 7

77213T3GS thru 77214ES. . . . . . 6

77214LGS thru 77214OS. . . . . . . 7

77214TGS thru 77215ES. . . . . . . 6

77215LGS thru 77215OS. . . . . . . 7

77215T3GS thru 77216ES. . . . . . 6

77216LGS thru 77216OS. . . . . . . 7

77216TGS thru 77220ES. . . . . . . 6

77220LGS thru 77220OGS . . . . . 7

77220T3GS thru 77225ES. . . . . . 6

77225LGS thru 77225OS. . . . . . . 7

77225T3GS thru 77230ES. . . . . . 6

77230LGS thru 77230OS. . . . . . . 7

77230T3GS thru 77240ES. . . . . . 6

77240LGS thru 77240OS. . . . . . . 7

77240T3GS thru 77250ES. . . . . . 6

77250LGS thru 77250OS. . . . . . . 7

77250T3GS thru 77260ES. . . . . . 6

77260LGS thru 77260OS. . . . . . . 7

77260T3GS thru 77280ES. . . . . . 6

77280LGS thru 77280OS. . . . . . . 7

77280T3GS thru 77280TS . . . . . . 6

301103D thru 303806D . . . . . . . 21

306103D thru 310806D . . . . . . . 20

312103D thru 313806D . . . . . . . 22

Page 68: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 68 –

Grinnell Mechanical Grooved ProductsSection 9 - Index

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page401014 thru 410806 . . . . . . . . . . 57

419014 thru 460806 . . . . . . . . . . 58

772200S . . . . . . . . . . . . . . . . . . . . 7

2212015GS thru 2216040S . . . . 24

2502513GS thru 2508060S . . . . 27

2513020GS thru 2514025S . . . . 28

2514030GS thru 2516050S . . . . 29

6182010WA thru 6184015WA. . . 54

6212520 thru 6524020W. . . . . . . 53

7162015EGS thru 7168060TS . . 12

7302005EGS thru 7302010TS . . 41

7302013ECS thru 7302013EGCS . . . . . . . . . . . . . . 43

7302013EGRCS . . . . . . . . . . . . . 44

7302013EGRS . . . . . . . . . . . . . . 42

7302013EGS. . . . . . . . . . . . . . . . 41

7302013ERCS . . . . . . . . . . . . . . 44

7302013ERS. . . . . . . . . . . . . . . . 42

7302013ES . . . . . . . . . . . . . . . . . 41

7302013TCS thru 7302013TGCS . . . . . . . . . . . . . . 43

7302013TGRCS . . . . . . . . . . . . . 44

7302013TGRS . . . . . . . . . . . . . . 42

7302013TGS. . . . . . . . . . . . . . . . 41

7302013TRCS . . . . . . . . . . . . . . 44

7302013TRS . . . . . . . . . . . . . . . . 42

7302013TS . . . . . . . . . . . . . . . . . 41

7302015ECS thru 7302015EGCS . . . . . . . . . . . . . . 43

7302015EGRCS . . . . . . . . . . . . . 44

7302015EGRS . . . . . . . . . . . . . . 42

7302015EGS. . . . . . . . . . . . . . . . 41

7302015ERCS . . . . . . . . . . . . . . 44

7302015ERS. . . . . . . . . . . . . . . . 42

7302015ES . . . . . . . . . . . . . . . . . 41

7302015TCS thru 7302015TGCS . . . . . . . . . . . . . . 43

7302015TGRCS . . . . . . . . . . . . . 44

7302015TGRS . . . . . . . . . . . . . . 42

7302015TGS. . . . . . . . . . . . . . . . 41

7302015TRCS . . . . . . . . . . . . . . 44

7302015TRS . . . . . . . . . . . . . . . . 42

7302015TS thru 7302510TS. . . . 41

7302513ECS thru 7302513EGCS . . . . . . . . . . . . . . 43

7302513EGRCS . . . . . . . . . . . . . 44

7302513EGRS . . . . . . . . . . . . . . 42

7302513EGS. . . . . . . . . . . . . . . . 41

7302513ERCS . . . . . . . . . . . . . . 44

7302513ERS. . . . . . . . . . . . . . . . 42

7302513ES . . . . . . . . . . . . . . . . . 41

7302513TCS thru 7302513TGCS . . . . . . . . . . . . . . 43

7302513TGRCS . . . . . . . . . . . . . 44

7302513TGRS . . . . . . . . . . . . . . 42

7302513TRCS . . . . . . . . . . . . . . 44

7302513TRS . . . . . . . . . . . . . . . . 42

7302513TS . . . . . . . . . . . . . . . . . 41

7302515ECS thru 7302515EGCS . . . . . . . . . . . . . . 43

7302515EGRCS . . . . . . . . . . . . . 44

7302515EGRS . . . . . . . . . . . . . . 42

7302515EGS. . . . . . . . . . . . . . . . 41

7302515ERCS . . . . . . . . . . . . . . 44

7302515ERS. . . . . . . . . . . . . . . . 42

7302515ES . . . . . . . . . . . . . . . . . 41

7302515TCS thru 7302515TGCS . . . . . . . . . . . . . . 43

7302515TGRCS . . . . . . . . . . . . . 44

7302515TGRS . . . . . . . . . . . . . . 42

7302515TGS. . . . . . . . . . . . . . . . 41

7302515TRCS . . . . . . . . . . . . . . 44

7302515TRS . . . . . . . . . . . . . . . . 42

7302515TS thru 7302520EGP. . . . . . . . . . . . . . . . 41

7302520EGRP . . . . . . . . . . . . . . 42

7302520EP . . . . . . . . . . . . . . . . . 41

7302520ERP. . . . . . . . . . . . . . . . 42

7302520TGP. . . . . . . . . . . . . . . . 41

7302520TGRP . . . . . . . . . . . . . . 42

7302520TP . . . . . . . . . . . . . . . . . 41

7302520TRP. . . . . . . . . . . . . . . . 42

7303005EGS thru 7303010TS . . 41

7303013ECS thru 7303013EGCS . . . . . . . . . . . . . . 43

7303013EGRCS . . . . . . . . . . . . . 44

7303013EGRS . . . . . . . . . . . . . . 42

7303013EGS . . . . . . . . . . . . . . . 41

7303013ERCS . . . . . . . . . . . . . . 44

7303013ERS. . . . . . . . . . . . . . . . 42

7303013ES . . . . . . . . . . . . . . . . . 41

7303013TCS thru 7303013TGCS . . . . . . . . . . . . . . 43

7303013TGRCS . . . . . . . . . . . . . 44

7303013TGRS . . . . . . . . . . . . . . 42

7303013TGS. . . . . . . . . . . . . . . . 41

7303013TRCS . . . . . . . . . . . . . . 44

7303013TRS. . . . . . . . . . . . . . . . 42

7303013TS . . . . . . . . . . . . . . . . . 41

7303015ECS thru 7303015EGCS . . . . . . . . . . . . . . 43

7303015EGRCS . . . . . . . . . . . . . 44

7303015EGRS . . . . . . . . . . . . . . 42

7303015EGS . . . . . . . . . . . . . . . 41

7303015ERCS . . . . . . . . . . . . . . 44

7303015ERS. . . . . . . . . . . . . . . . 42

7303015ES . . . . . . . . . . . . . . . . . 41

7303015TCS thru 7303015TGCS . . . . . . . . . . . . . . 43

7303015TGRCS . . . . . . . . . . . . . 44

7303015TGRS . . . . . . . . . . . . . . 42

7303015TGS. . . . . . . . . . . . . . . . 41

7303015TRCS . . . . . . . . . . . . . . 44

7303015TRS. . . . . . . . . . . . . . . . 42

7303015TS . . . . . . . . . . . . . . . . . 41

7303020ECS thru 7303020EGCS . . . . . . . . . . . . . . 43

7303020EGRCS . . . . . . . . . . . . . 44

7303020EGRS . . . . . . . . . . . . . . 42

7303020EGS . . . . . . . . . . . . . . . 41

Page 69: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 69 –

Grinnell Mechanical Grooved ProductsSection 9 - Index

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

7303020ERCS . . . . . . . . . . . . . . 44

7303020ERS . . . . . . . . . . . . . . . 42

7303020ES. . . . . . . . . . . . . . . . . 41

7303020TCS thru 7303020TGCS . . . . . . . . . . . . . . 43

7303020TGRCS. . . . . . . . . . . . . 44

7303020TGRS . . . . . . . . . . . . . . 42

7303020TGS . . . . . . . . . . . . . . . 41

7303020TRCS . . . . . . . . . . . . . . 44

7303020TRS . . . . . . . . . . . . . . . 42

7303020TS thru 7304010TS . . . 41

7304013ECS thru 7304013EGCS . . . . . . . . . . . . . . 43

7304013EGRCS. . . . . . . . . . . . . 44

7304013EGRS . . . . . . . . . . . . . . 42

7304013EGS . . . . . . . . . . . . . . . 41

7304013ERCS . . . . . . . . . . . . . . 44

7304013ERS . . . . . . . . . . . . . . . 42

7304013ES. . . . . . . . . . . . . . . . . 41

7304013TCS thru 7304013TGCS . . . . . . . . . . . . . . 43

7304013TGRCS. . . . . . . . . . . . . 44

7304013TGRS . . . . . . . . . . . . . . 42

7304013TGS . . . . . . . . . . . . . . . 41

7304013TRCS . . . . . . . . . . . . . . 44

7304013TRS . . . . . . . . . . . . . . . 42

7304013TS. . . . . . . . . . . . . . . . . 41

7304015ECS thru 7304015EGCS . . . . . . . . . . . . . . 43

7304015EGRCS. . . . . . . . . . . . . 44

7304015EGRS . . . . . . . . . . . . . . 42

7304015EGS . . . . . . . . . . . . . . . 41

7304015ERCS . . . . . . . . . . . . . . 44

7304015ERS . . . . . . . . . . . . . . . 42

7304015ES. . . . . . . . . . . . . . . . . 41

7304015TCS thru 7304015TGCS . . . . . . . . . . . . . . 43

7304015TGRCS. . . . . . . . . . . . . 44

7304015TGRS . . . . . . . . . . . . . . 42

7304015TGS . . . . . . . . . . . . . . . 41

7304015TRCS . . . . . . . . . . . . . . 44

7304015TRS . . . . . . . . . . . . . . . 42

7304015TS. . . . . . . . . . . . . . . . . 41

7304020ECS thru 7304020EGCS . . . . . . . . . . . . . . 43

7304020EGRCS. . . . . . . . . . . . . 44

7304020EGRS . . . . . . . . . . . . . . 42

7304020EGS . . . . . . . . . . . . . . . 41

7304020ERCS . . . . . . . . . . . . . . 44

7304020ERS . . . . . . . . . . . . . . . 42

7304020ES. . . . . . . . . . . . . . . . . 41

7304020TCS thru 7304020TGCS . . . . . . . . . . . . . . 43

7304020TGRCS. . . . . . . . . . . . . 44

7304020TGRS . . . . . . . . . . . . . . 42

7304020TGS . . . . . . . . . . . . . . . 41

7304020TRCS . . . . . . . . . . . . . . 44

7304020TRS . . . . . . . . . . . . . . . 42

7304020TS. . . . . . . . . . . . . . . . . 41

7304025ECS thru 7304025EGCS . . . . . . . . . . . . . . 43

7304025EGRCS. . . . . . . . . . . . . 44

7304025EGRS . . . . . . . . . . . . . . 42

7304025EGS . . . . . . . . . . . . . . . 41

7304025ERCS . . . . . . . . . . . . . . 44

7304025ERS . . . . . . . . . . . . . . . 42

7304025ES. . . . . . . . . . . . . . . . . 41

7304025TCS thru 7304025TGCS . . . . . . . . . . . . . . 43

7304025TGRCS. . . . . . . . . . . . . 44

7304025TGRS . . . . . . . . . . . . . . 42

7304025TGS . . . . . . . . . . . . . . . 41

7304025TRCS . . . . . . . . . . . . . . 44

7304025TRS . . . . . . . . . . . . . . . 42

7304025TS. . . . . . . . . . . . . . . . . 41

7304030ECS thru 7304030EGCS . . . . . . . . . . . . . . 43

7304030EGRCS. . . . . . . . . . . . . 44

7304030EGRS . . . . . . . . . . . . . . 42

7304030EGS . . . . . . . . . . . . . . . 41

7304030ERCS . . . . . . . . . . . . . . 44

7304030ERS . . . . . . . . . . . . . . . 42

7304030ES. . . . . . . . . . . . . . . . . 41

7304030TCS thru 7304030TGCS . . . . . . . . . . . . . . 43

7304030TGRCS. . . . . . . . . . . . . 44

7304030TGRS . . . . . . . . . . . . . . 42

7304030TGS . . . . . . . . . . . . . . . 41

7304030TRCS . . . . . . . . . . . . . . 44

7304030TRS . . . . . . . . . . . . . . . 42

7304030TS thru 7305015EGP. . 41

7305015EGRP . . . . . . . . . . . . . . 42

7305015EP . . . . . . . . . . . . . . . . 41

7305015ERP . . . . . . . . . . . . . . . 42

7305015TGP . . . . . . . . . . . . . . . 41

7305015TGRP . . . . . . . . . . . . . . 42

7305015TP. . . . . . . . . . . . . . . . . 41

7305015TRP . . . . . . . . . . . . . . . 42

7305020ECS thru 7305020EGCS . . . . . . . . . . . . . . 43

7305020EGRCS. . . . . . . . . . . . . 44

7305020EGRS . . . . . . . . . . . . . . 42

7305020EGS . . . . . . . . . . . . . . . 41

7305020ERCS . . . . . . . . . . . . . . 44

7305020ERS . . . . . . . . . . . . . . . 42

7305020ES. . . . . . . . . . . . . . . . . 41

7305020TCS thru 7305020TGCS . . . . . . . . . . . . . . 43

7305020TGRCS. . . . . . . . . . . . . 44

7305020TGRS . . . . . . . . . . . . . . 42

7305020TGS . . . . . . . . . . . . . . . 41

7305020TRCS . . . . . . . . . . . . . . 44

7305020TRS . . . . . . . . . . . . . . . 42

7305020TS. . . . . . . . . . . . . . . . . 41

7305025ECS thru 7305025EGCS . . . . . . . . . . . . . . 43

7305025EGRCS. . . . . . . . . . . . . 44

7305025EGRS . . . . . . . . . . . . . . 42

7305025EGS . . . . . . . . . . . . . . . 41

7305025ERCS . . . . . . . . . . . . . . 44

Page 70: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 70 –

Grinnell Mechanical Grooved ProductsSection 9 - Index

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page7305025ERS. . . . . . . . . . . . . . . . 42

7305025ES . . . . . . . . . . . . . . . . . 41

7305025TCS thru 7305025TGCS . . . . . . . . . . . . . . 43

7305025TGRCS . . . . . . . . . . . . . 44

7305025TGRS . . . . . . . . . . . . . . 42

7305025TGS. . . . . . . . . . . . . . . . 41

7305025TRCS . . . . . . . . . . . . . . 44

7305025TRS . . . . . . . . . . . . . . . . 42

7305025TS . . . . . . . . . . . . . . . . . 41

7305030ECP thru 7305030EGCP . . . . . . . . . . . . . . 43

7305030EGP. . . . . . . . . . . . . . . . 41

7305030EGRCS . . . . . . . . . . . . . 44

7305030EGRP . . . . . . . . . . . . . . 42

7305030EP . . . . . . . . . . . . . . . . . 41

7305030ERCS . . . . . . . . . . . . . . 44

7305030ERP. . . . . . . . . . . . . . . . 42

7305030TCP thru 7305030TGCP . . . . . . . . . . . . . . 43

7305030TGP. . . . . . . . . . . . . . . . 41

7305030TGRCS . . . . . . . . . . . . . 44

7305030TGRP . . . . . . . . . . . . . . 42

7305030TP . . . . . . . . . . . . . . . . . 41

7305030TRCS . . . . . . . . . . . . . . 44

7305030TRP . . . . . . . . . . . . . . . . 42

7306013EGP. . . . . . . . . . . . . . . . 41

7306013EGRP . . . . . . . . . . . . . . 42

7306013EP . . . . . . . . . . . . . . . . . 41

7306013ERP. . . . . . . . . . . . . . . . 42

7306013TGP. . . . . . . . . . . . . . . . 41

7306013TGRP . . . . . . . . . . . . . . 42

7306013TP . . . . . . . . . . . . . . . . . 41

7306013TRP . . . . . . . . . . . . . . . . 42

7306015ECS thru 7306015EGCS . . . . . . . . . . . . . . 43

7306015EGRCS . . . . . . . . . . . . . 44

7306015EGRS . . . . . . . . . . . . . . 42

7306015EGS. . . . . . . . . . . . . . . . 41

7306015ERCS . . . . . . . . . . . . . . 44

7306015ERS. . . . . . . . . . . . . . . . 42

7306015ES . . . . . . . . . . . . . . . . . 41

7306015TCS thru 7306015TGCS . . . . . . . . . . . . . . 43

7306015TGRCS . . . . . . . . . . . . . 44

7306015TGRS . . . . . . . . . . . . . . 42

7306015TGS. . . . . . . . . . . . . . . . 41

7306015TRCS . . . . . . . . . . . . . . 44

7306015TRS . . . . . . . . . . . . . . . . 42

7306015TS . . . . . . . . . . . . . . . . . 41

7306020ECS thru 7306020EGCS . . . . . . . . . . . . . . 43

7306020EGRCS . . . . . . . . . . . . . 44

7306020EGRS . . . . . . . . . . . . . . 42

7306020EGS. . . . . . . . . . . . . . . . 41

7306020ERCS . . . . . . . . . . . . . . 44

7306020ERS. . . . . . . . . . . . . . . . 42

7306020ES . . . . . . . . . . . . . . . . . 41

7306020TCS thru 7306020TGCS . . . . . . . . . . . . . . 43

7306020TGRCS . . . . . . . . . . . . . 44

7306020TGRS . . . . . . . . . . . . . . 42

7306020TGS. . . . . . . . . . . . . . . . 41

7306020TRCS . . . . . . . . . . . . . . 44

7306020TRS . . . . . . . . . . . . . . . . 42

7306020TS . . . . . . . . . . . . . . . . . 41

7306025ECS thru 7306025EGCS . . . . . . . . . . . . . . 43

7306025EGRCS . . . . . . . . . . . . . 44

7306025EGRS . . . . . . . . . . . . . . 42

7306025EGS. . . . . . . . . . . . . . . . 41

7306025ERCS . . . . . . . . . . . . . . 44

7306025ERS. . . . . . . . . . . . . . . . 42

7306025ES . . . . . . . . . . . . . . . . . 41

7306025TCS thru 7306025TGCS . . . . . . . . . . . . . . 43

7306025TGRCS . . . . . . . . . . . . . 44

7306025TGRS . . . . . . . . . . . . . . 42

7306025TGS. . . . . . . . . . . . . . . . 41

7306025TRCS . . . . . . . . . . . . . . 44

7306025TRS. . . . . . . . . . . . . . . . 42

7306025TS . . . . . . . . . . . . . . . . . 41

7306030ECS thru 7306030EGCS . . . . . . . . . . . . . . 43

7306030EGRCS . . . . . . . . . . . . . 44

7306030EGRS . . . . . . . . . . . . . . 42

7306030EGS . . . . . . . . . . . . . . . 41

7306030ERCS . . . . . . . . . . . . . . 44

7306030ERS. . . . . . . . . . . . . . . . 42

7306030ES . . . . . . . . . . . . . . . . . 41

7306030TCS thru 7306030TGCS . . . . . . . . . . . . . . 43

7306030TGRCS . . . . . . . . . . . . . 44

7306030TGRS . . . . . . . . . . . . . . 42

7306030TGS. . . . . . . . . . . . . . . . 41

7306030TRCS . . . . . . . . . . . . . . 44

7306030TRS. . . . . . . . . . . . . . . . 42

7306030TS . . . . . . . . . . . . . . . . . 41

7306040ECS thru 7306040EGCS . . . . . . . . . . . . . . 43

7306040EGRCS . . . . . . . . . . . . . 44

7306040EGRS . . . . . . . . . . . . . . 42

7306040EGS . . . . . . . . . . . . . . . 41

7306040ERCS . . . . . . . . . . . . . . 44

7306040ERS. . . . . . . . . . . . . . . . 42

7306040ES . . . . . . . . . . . . . . . . . 41

7306040TCS thru 7306040TGCS . . . . . . . . . . . . . . 43

7306040TGRCS . . . . . . . . . . . . . 44

7306040TGRS . . . . . . . . . . . . . . 42

7306040TGS. . . . . . . . . . . . . . . . 41

7306040TRCS . . . . . . . . . . . . . . 44

7306040TRS. . . . . . . . . . . . . . . . 42

7306040TS . . . . . . . . . . . . . . . . . 41

7308025ECS thru 7308025EGCS . . . . . . . . . . . . . . 43

7308025EGRCS . . . . . . . . . . . . . 44

7308025EGRS . . . . . . . . . . . . . . 42

7308025EGS . . . . . . . . . . . . . . . 41

7308025ERCS . . . . . . . . . . . . . . 44

Page 71: TFP Grooved Mechanical-5

See latest Catalog or Technical Data Sheets for specific Approvals, Listings, and Design Parameters. Prices subject to change without notice.

– 71 –

Grinnell Mechanical Grooved ProductsSection 9 - Index

Price Book

Effective Date

April 16, 2007

Supersedes: 9/18/2006022807-v1

Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page Part Number . . . . . . . . . . . . . . Page

Sect

ion

9In

dex

Sect

ion

8M

isce

llane

ous

Sect

ion

7St

ainl

ess

Stee

l Sys

tem

Sect

ion

6Gr

oove

d Co

pper

Sys

tem

sSe

ctio

n 5

Acce

ssor

ies

Sect

ion

4Va

lves

Sect

ion

3Br

anch

Out

lets

Sect

ion

2Gr

oove

d Co

uplin

gs &

Fitt

ings

Sect

ion

1In

trodu

ctio

n

7308025ERS . . . . . . . . . . . . . . . 42

7308025ES. . . . . . . . . . . . . . . . . 41

7308025TCS thru 7308025TGCS . . . . . . . . . . . . . . 43

7308025TGRCS. . . . . . . . . . . . . 44

7308025TGRS . . . . . . . . . . . . . . 42

7308025TGS . . . . . . . . . . . . . . . 41

7308025TRCS . . . . . . . . . . . . . . 44

7308025TRS . . . . . . . . . . . . . . . 42

7308025TS. . . . . . . . . . . . . . . . . 41

7308030ECS thru 7308030EGCS . . . . . . . . . . . . . . 43

7308030EGRCS. . . . . . . . . . . . . 44

7308030EGRS . . . . . . . . . . . . . . 42

7308030EGS . . . . . . . . . . . . . . . 41

7308030ERCS . . . . . . . . . . . . . . 44

7308030ERS . . . . . . . . . . . . . . . 42

7308030ES. . . . . . . . . . . . . . . . . 41

7308030TCS thru 7308030TGCS . . . . . . . . . . . . . . 43

7308030TGRCS. . . . . . . . . . . . . 44

7308030TGRS . . . . . . . . . . . . . . 42

7308030TGS . . . . . . . . . . . . . . . 41

7308030TRCS . . . . . . . . . . . . . . 44

7308030TRS . . . . . . . . . . . . . . . 42

7308030TS. . . . . . . . . . . . . . . . . 41

7308040ECS thru 7308040EGCS . . . . . . . . . . . . . . 43

7308040EGRCS. . . . . . . . . . . . . 44

7308040EGRS . . . . . . . . . . . . . . 42

7308040EGS . . . . . . . . . . . . . . . 41

7308040ERCS . . . . . . . . . . . . . . 44

7308040ERS . . . . . . . . . . . . . . . 42

7308040ES. . . . . . . . . . . . . . . . . 41

7308040TCS thru 7308040TGCS . . . . . . . . . . . . . . 43

7308040TGRCS. . . . . . . . . . . . . 44

7308040TGRS . . . . . . . . . . . . . . 42

7308040TGS . . . . . . . . . . . . . . . 41

7308040TRCS . . . . . . . . . . . . . . 44

7308040TRS . . . . . . . . . . . . . . . 42

7308040TS. . . . . . . . . . . . . . . . . 41

42110604 thru 42180606 . . . . . . 59

45010404 thru 45080606 . . . . . . 60

45110604 thru 45180606 . . . . . . 61

59030010T thru 59030080 . . . . . 47

61820075WA thru61840075WA . . . . . . . . . . . . . . . 54

73020075EGS thru73040075TS. . . . . . . . . . . . . . . . 41

421150754 thru 421300756 . . . . 59

2212015S . . . . . . . . . . . . . . . . . 24

B30210EG thru B30824TNG . . . 46

B810120E thru BV83530 . . . . . . 47

CB8000501 thru CB8000751 . . . 49

CB8000752 . . . . . . . . . . . . . . . . 50

CB8001001 . . . . . . . . . . . . . . . . 49

CB8001002 thru CB8001204 . . . 50

CB8001251 . . . . . . . . . . . . . . . . 49

CB8001252 . . . . . . . . . . . . . . . . 50

CB8001501 . . . . . . . . . . . . . . . . 49

CB8001502 . . . . . . . . . . . . . . . . 50

CB8002001 . . . . . . . . . . . . . . . . 49

CB8002002 thru CB8008004 . . . 50

NB10550 thru PT1000 . . . . . . . . 15

S8101010 thru S8108080 . . . . . 49

S85310 thru S85580G . . . . . . . . 48

Page 72: TFP Grooved Mechanical-5

GrinnellMechanical Products

Customer Service:Toll Free: (800) 558-5236

Fax: (800) 877-1295

Technical Service:Phone: (866) 500-4768

Fax: (401) 781-7317

www.grinnell.com