thank you from wood - meredith corporationtoys & kids’ furniture shop for more than 1,300...
TRANSCRIPT
Toys & Kids’ Furniture
Shop for more than 1,300 woodworking project plans, DVDs, back-issue collections, videos, tool reviews, books, and more!
Thank you from
WOOD®
Store.net
Thank you for ordering this WOOD®
magazine article. We hope you enjoy building your woodworking project. Please remember that this copyrighted material is for your use only.
It is unlawful to reprint or distribute it in any form.
Mobile Sheet-goods Rack/Cutofff Station
Visit us at WOODStore.net for more great project plans, like Shop Tools & Accessories Heirloom Furniture Outdoor Projects
MD-01071
Mobile Sheet-goods Rack/Cutoff Station
Blocks support sheets for circ-saw breakdown.
Little clearance needed; tools butt right alongside.
Fits in the space alongside your garage door
18"
50"Space for full-width cutoffs
The protruding ends act as both a clamping surface and a spacer between the spinning blade and the cutoffs stowed behind. Use a clamp-on straightedge to guide your saw.
IT DOUBLES AS A CUTOFF STATION
This compact unit packs loads of lumber into only 18" of width. Casters let you swivel one end to load up sheet goods from your driveway, then swivel the other to offload sheets into
your shop. The shorts rack side doubles as a simple panel saw, right, maximizing shop space even more. You can make it in a few hours from a single sheet of ¾" plywood, one 2×6, and seven 2×4s.
Build up the baseStart by cutting and assembling the 2×4 base with #8×3" flathead wood screws, as shown in the Exploded View on page 2. Add the 2×6 to the “sheets” side of the base keeping the bottoms of the base members flush. Cut a 16 1 ⁄2×96" piece of ¾" plywood to serve as the top of the base. Use a jigsaw to notch the ends and attach it to the base with #8×2" flathead wood screws.
MD-01059 ©Copyright Meredith Corporation 2015 woodstore.net
Small-Shop Solutions
2
EXPLODED VIEW
ENDS AND DIVIDER
¾ x 48 x 96" Plywood
1½ x 3½ x 96" Pine (2x4)
1½ x 3½ x 96" Pine (2x4)
1½ x 5½ x 96" Pine (2x6)
1½ x 3½ x 96" Pine (2x4) (5 needed)
Cutting DiagramFilename: 200Lumberrack2 (7-2)RL 7-2FILENAME:200LumberRckCD_#100672760.ai
Date: 7-6-10Lorna J.
Cutting Diagram
Stack up the rackCut the ends and divider to 13×47 ¾". Then, lay out and cut the angle on each, where shown in the Ends and Divider drawing. Set aside the angled cutoffs for later. Lay out the radius on the top of each end and the divider and jigsaw them to shape.
On the divider only, measure from the top and crosscut the divider down to 43 ½". Jigsaw the notches for the 2×4 supports where shown, then trace the cutout locations onto the end pieces for later reference.
With the base sitting flat on your workbench, attach the ends to the base, flush at the bottom edges and snug against the notches in the base top. (The ends protrude ½" from the front of the base to prevent sawing into the horizon-tal supports when used as a cutoff station. See photo on page 1.)
Crosscut the four horizontal supports to fit between the ends. Mark the location of the divider at 50" on each as well as on the base top. Install the horizontal supports and the divider, positioning it using the marks.
From the angled cutoffs you set aside, cut 3 ½×4 5∕8" filler pieces to fit under the protruding edge of the base top, where shown.
Install the four support blocks on the “shorts” side to serve as supports for breaking down sheet goods. Now load ’er up, tuck ’er away in the corner, and enjoy the extra space you’ve created.
Project design: Kevin BoyleIllustrations: Roxanne LeMoine; Lorna Johnson
For enlargeable versions of these drawings go to
woodmagazine.com/cutoffstation
woodmagazine.com
from the editors of WOOD®
magazine
Best-Ever Plans for Workshop Tools & Accessories
Download any of these woodworking plans, at woodmagazine.com/plans Or, to have paper plans mailed directly to you, call toll-free 1-888-636-4478.
Please have your credit card available.AD#WD1110
1,300+woodworking plans atwoodmagazine.com/plans
Go-Anywhere Tool Caddy Plan DP-00426
Shop Cart/Workbench Plan DP-00592
Mobile Tool CabinetPlan DP-00260
Lumber Storage Rack Plan DP-00135
Mobile Mitersaw Center Plan DP-00098
Space-Saving Double–Duty Tablesaw Workbench
Plan DP-00553
Roll-Around Tool Base Plan DP-00061
Flip-Top Work Center Plan DP-00239
Folding Work Table Plan DP-00620
Bench-Tool SystemPlan DP-00560
Mobile StoragePlan DP-00321
Shop-in-a-Box Tool CabinetPlan DP-00518
Traditional Workbench Plan DP-00482
Space-Saving Work Center Plan DP-00168
Mobile Sawing & Routing Center
Plan DP-00271
Simple ‘N’ Sturdy Tool Stand
Plan DP-00577
Five Great Clamp Organizers
Plan DP-00230
Basic Workbench and 6 Ways to Beef it Up
Plan DP-00456
Full-ServiceWorkbench Part 1
Plan DP-00058
Get’r-Done Shop Cart Plan DP-00486