thanksgiving cards by tracie brown

2
7/31/2019 Thanksgiving Cards by Tracie Brown http://slidepdf.com/reader/full/thanksgiving-cards-by-tracie-brown 1/2 Thanksgiving Cards! a Purple Cows project designed by: Tracie Bro www.colorworksdesign.n  Too ls and supplie s: Purple Cows CraftGeek Wind It #7100 Purple Cows CraftGeek Pin It #7000 Purple Cows CraftGeek Laurel Leaf Pins #7008 Purple Cows 2 in 1 Trimmer #1040 Bazzill Cardstock CTMH Ranger Distress Ink Spellbinder Dies  Tulle Brads Instructions: 1.) Card is 5 x 6.5 with a back ground card front measuring 4.75 x 6.25 2.) Crinkle up background piece of paper in your hands then open and flatten then brush distress in across lightly to accent the wrinkles and crinkles. 3.) With the Purple Cows Wind It. Wind desired sh with wire and set aside. 4.) Die cut leaves and flower with the three colors card stock, distress the edges. Before placing them bunch, use pin it and place metal leaves into two o die cut leaves. Bend them and glue dot them into place, with a piece of tulle, then put a metal brad through the middle to keep them in place. 5.) Before pushing the brad into place wrap the wi shape from Wind It around it so it drops down int tulle. 6.) Die cut shape and stamp your sentiment onto another die cut shape, use pop up dots to place on bottom of sentiment and glue into place.

Upload: purple-cows-inc

Post on 04-Apr-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Thanksgiving Cards by Tracie Brown

7/31/2019 Thanksgiving Cards by Tracie Brown

http://slidepdf.com/reader/full/thanksgiving-cards-by-tracie-brown 1/2

Thanksgiving Cards!a Purple Cows project designed by: Tracie Bro

www.colorworksdesign.n

 Tools and supplies:Purple Cows CraftGeek Wind It #7100 Purple Cows CraftGeek Pin It #7000 Purple Cows CraftGeek Laurel Leaf Pins #7008Purple Cows 2 in 1 Trimmer #1040 Bazzill CardstockCTMHRanger Distress InkSpellbinder Dies TulleBrads 

Instructions:

1.) Card is 5 x 6.5 with a back ground card front

measuring 4.75 x 6.25

2.) Crinkle up background piece of paper in your

hands then open and flatten then brush distress in

across lightly to accent the wrinkles and crinkles.

3.) With the Purple Cows Wind It. Wind desired sh

with wire and set aside.

4.) Die cut leaves and flower with the three colors

card stock, distress the edges. Before placing them

bunch, use pin it and place metal leaves into two o

die cut leaves. Bend them and glue dot them into

place, with a piece of tulle, then put a metal brad

through the middle to keep them in place.

5.) Before pushing the brad into place wrap the wi

shape from Wind It around it so it drops down int

tulle.

6.) Die cut shape and stamp your sentiment onto

another die cut shape, use pop up dots to place on

bottom of sentiment and glue into place.

Page 2: Thanksgiving Cards by Tracie Brown

7/31/2019 Thanksgiving Cards by Tracie Brown

http://slidepdf.com/reader/full/thanksgiving-cards-by-tracie-brown 2/2

 Tools and supplies:Purple Cows CraftGeek Wind It #7100 Purple Cows CraftGeek Pin It #7000 Purple Cows CraftGeek Pins #7006 Purple Cows CraftGeek Punch It #7202 Purple Cows 2 in 1 Trimmer #1040 CardstockCTMHRanger Distress InkSizzix Die TulleBrad

Ribbon 

Thanksgiving Cards!a Purple Cows project designed by: Tracie Br

www.colorworksdesign

Instructions:

1.) Card is 5 x 6.5 with a back ground card front measu

4.75 x 6.25 then cut additional pieces of card stock for

band at bottom 2 x 5 and sentiment stamped on 2.75 x

2.) Stamp sentiment on the 2.75 x 4.5 and distress it, w

the Purple Cows Pin It, Pin the leaves.

3.) Using the Purple Cows Punch It, Punch a corner ofbrown cardstock. Trim to form a triangle.

4.) Die cut flowers in three sizes, Ink them and mold p

with your fingers by folding and bending.

5.) Place the band on bottom of card front a ½” from

bottom. Next place your 2.75 x 4.5 sentiment piece dow

the top. Next place your punched corner even with lef

hand corner of sentiment piece.

6.) Place the flowers into position, use metal brads to hthem in place permanently.

7.) Wrap tulle around card and fold under front

background paper glue dot into place. Adhere to card

and add a wired ribbon bow.