7/28/2019 THAYER Weigh Belt Feeder Data Sheet

http://slidepdf.com/reader/full/thayer-weigh-belt-feeder-data-sheet 1/2

THAYER SCALE, HYER INDUSTRIES, INC.P. O. Box 669, 91 Schoosett Street, Pembroke, MA, USA 02359

Phone (781) 826-8101 • Fax (781) 826-7944E-MAIL sales@thayerscale.com • WEBSITE http://www.thayerscale.com

   W   E   I   G

   H

   B   E   L   T

   /   F   E   E

   D   E   R

   D  a   t  a

   S

   h  e  e

   t

The completion of this engineering data sheet is necessary to correctly apply and design an accuratemeasurement system that meets all of your requirements. Please furnish all information requested below.

Please complete an Instrumentation Data Sheet to define your instrumentation/interface needs.

Please attach a free hand sketch of the application to this data sheet.

If you would like to conduct a material test, attach a Material Safety Data Sheet (MSDS) for each product

to be tested. DO NOT FORWARD MATERIAL AT THIS TIME. You will be given a shipping address, requiredsample size and a Material Authorization Number after your MSDS sheet(s) have been reviewed andapproved. 

Company : Contact :

Street Address : Title :

P. O. Box : Phone :

City : Fax :

State : E-Mail :

Zip/Postal Code : Project Name :

Application:

Totalize Measure Feed Rate Control Feed Rate

Feed Rate (minimum) :Feed Rate (normal) :Feed Rate (maximum) :For rate control application preferred drive type is

 Accuracy Required : % of 

Batch

Batch Size (minimum) :Batch Size (maximum) :Batch Time :Batch Frequency : batches per  

Material Specifications:

Ingredient Name : Chemical Name :

Particle Size : Max. Lump Size :

Bulk Density (Minimum) : Specific Gravity :

Bulk Density (Maximum) : Temperature : º

Moisture Content % : max min Dry Damp Wet

Material Characteristics:

Abrasive Dusty Free Flowing Packs Under Pressure

Adhesive Explosive Friable Rat Holes

Bridges Floodable Hygroscopic Toxic

Corrosive Fragile Interlocks & Mats Similar to

Types of Feeders known to be suitable for handling material:

Belt Vibratory Screw Rotary Vane

Weigh Belt/Feeder Data Sheet Page 1 of 2

7/28/2019 THAYER Weigh Belt Feeder Data Sheet

http://slidepdf.com/reader/full/thayer-weigh-belt-feeder-data-sheet 2/2

THAYER SCALE, HYER INDUSTRIES, INC.P. O. Box 669, 91 Schoosett Street, Pembroke, MA, USA 02359

Phone (781) 826-8101 • Fax (781) 826-7944E-MAIL sales@thayerscale.com • WEBSITE http://www.thayerscale.com

   W   E   I   G   H   B   E   L   T   /   F   E   E   D   E   R   D  a   t  a   S   h

  e  e   t

Process Flow:

Material is gravity fed through wide x long bin discharge opening.

Material is gravity fed through diameter bin discharge opening.

Material is fed via type pre-feeder, weigh belt. If right angle, width of pre-feeder is .

Feeder discharges to:

Weigh Belt/Feeder Construction Requirements:

Construction Type: Paint: Paint Tint (RAL):

Materials of Construction; Frame: Contact Parts:

Enclosure Requirements:

Design Pressure Rating: Design Vacuum Rating:

Dust Take-Off: Belt Cleaner:

Installation Notes:

 Ambient Temperature range: º to º Location is:

Electrical Area Classification for weigh belt/feeder : Non-Hazardous (unclassified)Class , Division , Group andClass , Division , Group

Electrical Area Classification for drive : Non-Hazardous (unclassified)Class , Division , Group andClass , Division , Group

Electrical Area Classification for instrument : Non-Hazardous (unclassified)Class , Division , Group andClass , Division , Group

Power available for motor/drive :   VAC, Phase, Hz

Weigh Belt/Feeder Data Sheet Page 2 of 2

CENTERLINEOF INLET

CENTERLINE OFDISCHARGE