the 8th asme-jsmebaillis (université de lyon, cnrs, insa-lyon, cethil, umr5008, lyon, france)...

The 8th ASME-JSME

Thermal Engineering Joint Conference ( AJTEC2011 )

Conference Program

March 13 - 17, 2011

Waikiki Beach Marriott Resort & Spa, Honolulu, Hawaii

Co-sponsored by The Thermal Engineering Division, Japan Society of Mechanical Engineers

and The Heat transfer Division, American Society of Mechanical Engineers

In cooperation with

The Energy Transport Process Division, American Institute of Chemical Engineers

1

Announcement from the Chairpersons

The American Society of Mechanical Engineers (ASME) and the Japan Society of Mechanical Engineers (JSME)

have co-developed a successful series of joint conferences on thermal engineering at four-year intervals. AJTEC

2011 is the 8th ASME/JSME Thermal Engineering Joint Conference. The previous conferences in this series were

held in: Honolulu, Hawaii (1983 and 1987); Reno, Nevada (1991); Maui, Hawaii (1995); San Diego, California

(1999); Hawaii Island, Hawaii (2003); and Vancouver, Canada (2007). AJTEC 2011 will be held again in Honolulu

Hawaii.

The Key Themes of AJTEC 2011 are "Fundamental" and "Interdisciplinary" with a vision for the future of

Thermal Engineering.

The 20th century is, in many ways symbolized by the phrases "Division" and "Development". In the early part of

the century, engineers divided systems into their most fundamental elements for purpose of study. As the century

progressed, scientific understanding enabled the enormous development of many new technologies.

In the dawn of the new century, thermal engineers will be required to attain a better understanding of fundamental

phenomena governing complex and integrated mechanical, chemical, and energy systems. As such, we must

increase our efforts to integrate thermal engineering with other disciplines, and broaden our perspective to include

an ever-widening range of time scales (from ultra rapid to long term) and length scales (from nanoscale to global).

Such efforts require a strong collective will from the thermal engineering community to engage new technological

challenges and to collaborate with scientists and engineers from other disciplines to meet these challenges with

unique and innovative solutions. The 21st century has opened the gate for this new direction and the thermal

engineering community appears ready and willing to embrace the challenges that lie ahead.

The objective of the AJTEC 2011 conference is to provide an international forum for the exchange of such new

ideas and direction as described above and the presentation of the latest work in the field. We strongly encourage

attendance and paper submission from sister societies around the globe including those from ASME and JSME.

Koichi Hishida, Keio University, Conference Co-Chair (JSME)

James Klausner, University of Florida, Conference Co-Chair (ASME)

6

Floor Plan of the Meeting Area - Paoakalani Tower

Third Floor

Second Floor

7

General Information

Presentation and Audio-Visual Aids All the presentations except the Keynote Lectures are allotted for 20 minutes including discussion. Each session

room will have a fullcolor liquid crystal projector (LCP). The LCP will be equipped with a connection cable with

D-Sub mini 15-pin male connector for RGB-video input from computers. Note that speakers who wish to use the

LCP must prepare their own computer, presentation software, and additional connectors if needed.

Welcome Reception

On Sunday evening, March 13, 2011, all attendees are invited to the Welcome Reception. The Welcome Reception

will be held at 5:00 pm to 7:00 pm at the Pualeilani Terrace, which is located on the third floor of the Kealohilani

Tower and is connected to the second floor of the Paoakalani Tower.

Conference Banquet The conference banquet will be at 7:00 pm to 9:00 pm on Wednesday, March 16, 2011. Dinner will be served as a

buffet, with seating provided. The conference banquet will be held at the Kona Moku ballroom. The regular

registration fee includes admission to the banquet.

Conference Breakfast and Lunch Everyday of the technical sessions, Monday, March 14 through Thursday, March 17, a buffet style conference

breakfast and lunch will be served. All the attendees are invited to the conference breakfast and lunch.

Keynote Lectures

Keynote Lectures will be presented in the Kona Moku ballroom every morning from 9:00 am to 10:20 am.

Keynote Lecturers are as follows:

Keynote 1, 9:00 am - 9:40 am, Monday, March 14 Advanced Power Generation Systems and Related Thermal Engineering Problems, Mamoru Ozawa, Ryosuke

Matsumoto, Hisashi Umekawa (Kansai University, Suita, Osaka, Japan)

Keynote 2, 9:40 am - 10:20 am, Monday, March 14 Surrogate-Based Modeling and Dimension-Reduction Techniques for Thermo-Fluid & Energy Systems,

Young-Chang Cho, Wenbo Du, Amit Gupta, Chien-Chou Tseng, Ann Marie Sastry, Wei Shyy (University of

Michigan, Ann Arbor, MI, United States)

Keynote 3, 9:00 am - 9:40 am, Tuesday, March 15 Two-Phase Micro-Channel Heat Sinks: Theory, Applications and Limitations, Issam Mudawar (Purdue University,

West Lafayette, IN, United States)

Keynote 4, 9:40 am - 10:20 am, Tuesday, March 15 Spacecraft Thermal Management, Bruce Drolen (The Boeing Company, Los Angeles, United States)

Keynote 5, 9:00 am - 9:40 am, Wednesday, March 16 Significance of Micro-Scall Mass Transport Phenomena on Fuel Cells and CO2 Sequestration, Shuichiro Hirai,

Shohji Tsushima, Suguru Uemura (Tokyo Institute of Technology, Tokyo, Japan)

Keynote 6, 9:40 am - 10:20 am, Wednesday, March 16 Solar Thermal Fuel Production, Christian Sattler (German Aerospace Center, Cologne, Koln, Germany), Hans

Muller-Steinhagen (Technical University of Dresden, Dresden, Germany), Martin Roeb, Dennis Thomey, Martina

Neises (German Aerospace Center, Cologne, Koln, Germany)

8

Keynote 7, 9:00 am - 9:40 am, Thursday, March 17 Micro and Extended-Nano Fluidics on Microchip for Chemistry and Bio-Medical Applications, Takehiko

Kitamori (The University of Tokyo, Tokyo, Japan)

Donald Q. Kern Award Lecture

In honor of Donald Q. Kern, pioneer in process heat transfer, the AIChE Transport Energy Process Division

recognizes an individual's expertise in a given field of heat transfer or energy conversion. Selection criteria

include:

1. Significant contributions to applied heat transfer or conversion or in the translation of research results into

useful technological applications.

2. The recipient will prepare a written review article to be published in the AIChE Journal.

The 2010 Donald Q. Kern award recipient is Mohamed El-Genk, Regents' Professor, Chemical, Nuclear, and

Mechanical Engineering, University of New Mexico.

Lecture from Prof. Mohamed El-Genk will be held on 9:40 - 10:20 am, Thursday, March 17 at the Kona Moku

ballroom. Title of the lecture is:

Nucleate Boiling Enhancements on Porous Graphite and Micro-Porous and Macro-Finned Copper Surfaces

9

Organizing Committee

Chair Persons: Koichi Hishida, Keio University

James Klausner, University of Florida

Secretary-General: Isao Satoh, Tokyo Institute of Technology

Committee Members:Amanie Abdelmessih, Saint Martin's University

Alexis Abramson, Case Western Reserve University

Fumiteru Akamatsu, Osaka University

Kalyan Annamalai, Texas A&M University

Julie Asfia, Boeing Company

Debjyoti Banerjee, Texas A&M University

Alex Brown, Sandia National Laboratories

Qingjun (Steve) Cai, Teledyne Scientific

Takemi Chikahisa, Hokkaido University

Yaroslav Chudnovsky, Gas Technology Institute

Baratunde Cola, Georgia Institute of Technology

Ingrid Cotoros, Lockheed Martin

John Crepeau, University of Idaho

Hirofumi Daiguji, The University of Tokyo

Mohamed El-Genk, University of New Mexico

Ofodike A. Ezekoye, University of Texas

Yoshimichi Hagiwara, Kyoto Institute of Technology

Tatsuya Hasegawa, Nagoya University

Leiyong Jiang, National Research Council Canada

Amir Jokar, ThermoFluids Tech

Kris L Jorgensen, The Babcock & Wilcox Co.

Yasuo Kawaguchi, Tokyo University of Science

Masahiro Kawaji, City College of New York

Hideaki Kobayashi, Tohoku University

Atsuki Komiya, Tohoku University

Shigeru Koyama, Kyushu University

Tomoaki Kunugi, Kyoto University

Ben Q. Li, University of Michigan

Wei Li, Zhejiang University

Wojciech Lipinski, University of Minnesota

Raj M. Manglik, University of Cincinnati

Kaoru Maruta, Tohoku University

Shigeo Maruyama, The University of Tokyo

Yukihiko Matsumura, Hiroshima University

Alan McGaughey, Carnegie Mellon University

Kunal Mitra, Florida Institute of Technology

Koji Miyazaki, Kyushu Institute of Technology

Michael Modest, UC Merced

Arun Muley, Koch Heat Transfer

Yuji Nagasaka, Keio University

Kazuyoshi Nakabe, Kyoto University

Vinod Narayanan, Oregon State University

Arvind Narayanaswamy, Columbia University

Chang Oh, Idaho National Laboratory

Taku Ohara, Tohoku University

Keunhan (Kay) Park, University of Rhode Island

Yoav Peles, Rensselaer Polytechnic Institute

Leslie Phinney, Sandia National Laboratories

Joel Plawsky, Rensselaer Polytechnic Institute

T.S. Ravigururajan, Wichita State University

Shripad T. Revankar, Purdue University

Xiulin Ruan, Purdue University

Takushi Saito, Tokyo Institute of Technology

Jun Sakakibara, University of Tsukuba

Atsushi Sakurai, Niigata University

Laura Schaefer, University of Pittsburgh

Mitra Sexton, Knolls Atomic Power Laboratory

S.A. Sherif, University of Florida

Jessica Shi, Electric Power Research Institute

Masahiko Shibahara, Osaka University

Naoki Shikazono, The University of Tokyo

Ryo Shirakashi, The University of Tokyo

Ali Siahpush, Idaho National Laboratory

Alex da Silva, University of Texas at Austin

Manohar Sohal, Idaho National Laboratory

Kazuhiro Suga, Osaka Prefecture University

Yuji Suzuki, The University of Tokyo

Shigeru Tada, National Defense Academy

Masato Tagawa, Nagoya Institute of Technology

Yasuyuki Takata, Kyushu University

Mamoru Tanahashi, Tokyo Institute of Technology

Eiji Tomita, Okayama University

Shohji Tsushima, Tokyo Institute of Technology

Erol Ulucakli, Lafayette College

Xinwei Wang, Iowa State University

Brent Webb, Brigham Young University

Jun Yamada, Shibaura Institute of Technology

Kenji Yasuoka, Keio University

Theodore Zannis, Hellenic Naval Academy

Zhuomin Zhang, Georgia Institute of Technology

Chenn Zhou, Purdue University Calumet

10

Technical Sessions

Monday, March 14

Opening Remarks

Room: Kona Moku 8:50-9:00, Monday, March 14

Session Organizer: Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan)

Track 4: Keynote Lectures Track Chair: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan)

Track Co-Chair: James Klausner (Univesity of Florida, Gainesville, FL, United States)


4-1-3 Keynote - 1

Session Organizer: Koichi Hishida (Keio University, Yokohama, Japan)

AJTEC2011- 44427

Advanced Power Generation Systems and Related Thermal Engineering Problems, Mamoru Ozawa,

Ryosuke Matsumoto, Hisashi Umekawa (Kansai University, Suita, Osaka, Japan)


4-1-4 Keynote - 2

Session Organizer: Renwei Mei (University of Florida, Gainesville, FL, United States)

AJTEC2011-44034

Surrogate-Based Modeling and Dimension-Reduction Techniques for Thermo-Fluid & Energy Systems,

Young-Chang Cho, Wenbo Du, Amit Gupta, Chien-Chou Tseng, Ann Marie Sastry, Wei Shyy (University of

Michigan, Ann Arbor, MI, United States)

Track 1: Fundamentals of Heat and Mass Transfer Track Chair: Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan)

Track Co-Chair: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States)

Track Co-Chair: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)

Room: Honolulu 10:40-12:00, Monday, March 14

1-5-1 Radiative Heat Transfer - 1

Session Organizer: Michael Modest (UC Merced, Merced, CA, United States)

AJTEC2011-44011

A Simple Physical Approach to Model Spectral Radiative Properties of Semi-Transparent Dispersed

Materials, Leonid Dombrovsky (Joint Institute for High Temperatures, Moscow, Russia), Dominique

Baillis (Université de Lyon, CNRS, INSA-Lyon, CETHIL, UMR5008, Lyon, France)

AJTEC2011-44332

Measurements of Spectral Transmittance of Porous Cerium Dioxide Media in the Range 900-1,700 nm,

Krithiga Ganesan, Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)

AJTEC2011-44166

11

Radiative Property Measurements of Oxy-Fuel Flames, Clinton R. Bedick, Stephen K. Beer, Kent H.

Casleton, Benjamin T. Chorpening (US Department of Energy National Energy Technology Laboratory,

Morgantown, WV, United States), David W. Shaw (Department of Engineering, Beaver Falls, PA, United

States), M. Joseph Yip (US Department of Energy National Energy Technology Laboratory, Morgantown,

WV, United States)

AJTEC2011-44622

Control of Radiative Properties of Coatings Pigmented with Fe2O3 Nanoparticles, Hiroki Gonome, Mehdi

Baneshi, Atsuki Komiya, Shigenao Maruyama (Tohoku University, Sendai, Miyagi, Japan)

Room: Honolulu 13:40-15:00, Monday, March 14

1-5-2 Radiative Heat Transfer - 2

Session Organizer: Brent Webb (Brigham Young University, Provo, UT, United States)

AJTEC2011-44131

Hybrid SN-PN Solution of the Radiative Transfer Equation in Multi-Dimensional Media, Maathangi

Sankar, Sandip Mazumder (Ohio State University, Columbus, OH, United States)

AJTEC2011-44487

Importance Sampling in Monte Carlo Ray Tracing Solutions Applied to Radiation in Hypersonic Entry

Flows, Andrew Feldick (Pennsylvania State University, University Park, PA, United States), Michael

Modest (University of California, Merced, Merced, CA, United States)

AJTEC2011-44515

Thermal Radiation From a Photonic Crystal of Silica-Particles, Nozomi Ikemachi, Ryota Nakano, Shohei

Kurogi, Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)

AJTEC2011-44523

Effect of Skin Structure Change with Age on Optical Characteristics of Human Skin, Jun Yamada, Tatsuya

Ogawa, Hirokazu Kawai (Shibaura Institute of Technology, Tokyo, Japan), Hironobu Yoshikawa, Sadaki

Takata (Shiseido Co., LTD, Tokyo, Japan)

Room: Kou 10:40-12:00, Monday, March 14

1-8-1 Measurement - I

Session Organizer: Atsuki Komiya (Tohoku University, Sendai, Miyagi, Japan)

AJTEC2011-44271

Measurement Technique of In-Plane Thermal Resistance of PCB, Tomoyuki Hatakeyama, Masaru

Ishizuka, Shinji Nakagawa, Yuta Nakano (Toyama Prefectural University, Toyama, Japan), Masataka

Hirokawa (Oki Printed Circuit, Niigata, Japan), Toshio Tomimura (Kumamoto University, Kumamoto,

Japan)

AJTEC2011-44185

Uncertainties on HTC Measurement of Water Spray Quenching of Aluminum Alloys, Saeed Bikass, Bjørn

Andersson, Artem Pilipenk (Sintef and University of Oslo, Oslo, Norway)

AJTEC2011-44206

Dew and Frost Points Measurements and Estimation for Residual Gases in High-Pressure Hydrogen,

Kenji Ishida, Masataka Kosaka, Masanori Monde (Saga University, Saga, Japan)

AJTEC2011-44403

Visualization of Dispersed Phase Flow in Centrifugal Extractor Using Taylor-Couette Vortex Flow,

Hideharu Takahashi, Hiroshige Kikura, Kenji Takeshita, Masanori Aritomi (Tokyo Institute of

Technology, Tokyo, Japan)


1-8-4 Measurement - II

Session Organizer: Jun Sakakibara (University of Tsukuba, Tsukuba, Japan)

AJTEC2011-44370

12

Measurement of Current-Density in PEFC with NMR Sensors, Kuniyasu Ogawa, Yasuo Yokouchi (Keio

University, Yokohama, Japan), Tomoyuki Haishi (MRTechnology, Tsukuba, Japan), Kohei Ito (Kyushu

University, Fukuoka, Japan)

AJTEC2011-44415

Thermal Conductivity Measurement of Hydrogen at High Pressure and High Temperature, Koichi Kimura,

Shogo Moroe (Kyushu University, Fukuoka, Japan), Peter Lloyd Woodfield (Griffith University, Southport,

Qld, Australia), Jun Fukai (Kyushu University, Fukuoka, Japan), Kan’ei Shinzato (National Institute of

Advanced Industrial Science and Technology, Nishi-ku, Fukuoka, Japan), Masamichi Kohno (Kyushu

University, Fukuoka, Japan), Motoo Fujii (National Institute of Advanced Industrial Science and

Technology, Fukuoka, Nishi-ku, Japan), Yasuyuki Takata (Kyushu University, Fukuoka, Japan)

AJTEC2011-44582

Flow Pattern Dynamics Around a Vertical Dividing Junction, M. B. Alamu, B.J. Azzopardi (University of

Nottingham, Nottingham, United Kingdom)

AJTEC2011-44499

Unsteady Flow Structure Behind a Heated Cylinder Measured by Time-Resolved PIV with

Thermo-Couple Sensing, Yuji Ohta, Takuya Mukoyama, Koichi Hishida (Keio University, Yokohama,

Japan)


1-8-2 Instrumentation - I

Session Organizer: Koichi Hishida (Keio University, Yokohama, Japan)

Session Co-Organizer: Shripad T. Revankar (Purdue University, West Lafayette, IN, United States)

AJTEC2011-44120

Heat Source Localization Sensitivity Analyses for an Ultrasonic Sensor Array, Michael R. Myers

(Vanderbilt University, Nashville, TN, United States), Ariosto B. Jorge (Federal University of Itajuba,

Itajuba, MG, Brazil), D. G. Walker (Vanderbilt University, Nashville, TN, United States), Mark J. Mutton

(Industrial Measurement Systems, Inc., Aurora, IL, United States)

AJTEC2011-44243

Ultrasound Characteristics in High-Temperature Fluid, Tomonori Ihara, Hiroshige Kikura, Yasushi

Takeda (Tokyo Institute of Technology, Tokyo, Japan), Eiji Ochi, Akira Inagaki (Japan Nuclear Fuel

Limited, Aomori, Japan)

AJTEC2011-44437

Response Compensation Scheme for Constant-Current Hot-Wire Anemometry Based on Frequency

Response Analysis, Kazuhide Kaifuku, Soe Minn Khine, Tomoya Houra, Masato Tagawa (Nagoya

Institute of Technology, Nagoya, Japan)

AJTEC2011-44442

Acceleration of Recursive Cross-Correlation PIV using Multiple GPUs, Shuhei Tarashima, Satoshi

Someya, Koji Okamoto (The University of Tokyo, Kashiwa, Chiba, Japan)

Room: Waikiki 1 10:40-12:00, Monday, March 14

1-3-2 Bubble Dynamics in Boiling Phenomena - 1

Session Organizer: David Christopher (Tsinghua University, Beijing, China)

Session Co-Organizer: Ichiro Ueno (Tokyo University of Science, Noda, Chiba, Japan)

AJTEC2011-44051

Lower Limit of Homogeneous Nucleation Boiling Explosion in Water During Linear Boundary Heating

and Contact with High Temperature Surface, Mohamamd Nasim Hasan, Masanori Monde, Yuichi

Mitsutake (Saga University, Saga, Japan)

AJTEC2011-44429

A New Empirical Model for Bubble Growth: Boiling in an Infinite Medium and on a Wall at High

Superheat, Herman D. Haustein (RWTH, Aachen, Germany), Georg F. Dietze, Reinhold Kneer (RWTH

Aachen University, Aachen, Germany)

13

AJTEC2011-44087

Extension of the Full Cavitation Model for Cryogenic Fluids, H. Q. Yang (CFD Research Corp., Huntsville,

AL, United States)


1-3-8 Bubble Dynamics in Boiling Phenomena - 2

Session Organizer: Hiroyasu Ohtake (Kogakuin University, Tokyo, Japan)

Session Co-Organizer: Deyu Li (Vanderbilt University, Nashville, TN, United States)

AJTEC2011-44153

Flushing of Non-Condensable Gases by Saturated Steam, Rajesh Patel, Raivat Patel, Chao Zhu (New

Jersey Institute of Technology, Newark, NJ, United States), Chao-Hsin Lin (Boeing Commercial

Airplanes, Seattle, WA, United States)

AJTEC2011-44324

Molecular Dynamics Simulations of Homogeneous and Heterogeneous Thermal Bubble Nucleation using

NPT Systems, Min Chen, Yunfei Chen (Southeast University, Nanjing, Jiangsu, China), Juekuan Yang,

Yandong Gao, Deyu Li (Vanderbilt Unviersity, Nashville, TN, United States)

AJTEC2011-44336

Nucleate Boiling Bubble Dynamics in a PDMS Microchannel with a Single Nucleation Site, Haojie Wang,

China, Xipeng Lin, David Christopher (Tsinghua University, Beijing, China)

AJTEC2011-44595

Condensation/Collapse of Vapor Bubble Injected to Subcooled Pool, Ichiro Ueno, Ryota Hosoya,

Chungpyo Hong (Tokyo Univeristy of Science, Chiba, Japan)


1-3-9 Heat Pipe and Thermosyphon

Session Organizer: Joel Plawsky (Rensselaer Polytechnic Institute, Troy, NY, United States)

Session Co-Organizer: Yoshiyuki Abe (AIST, Tsukuba, Ibaraki, Japan)

AJTEC2011-44360

Utilization of Advanced Working Fluids in Heat Pipes, Sean Reilly, Ivan Catton (University of California,

Los Angeles, Los Angeles, CA, United States)

AJTEC2011-44244

A Design for Loop Thermosyphon Including Effect of Non-Condensable Gas, Hiroyuku Toyoda,

Tadakatsu Nakajima, Yoshihiro Kondo (Mechanical Engineering Research Labo, Hitachi, Ltd.,

Hitachinaka, Ibaraki, Japan), Akio Idei, Shigemasa Sato (Enterprise Server Division, Hitachi, Ltd.,

Hadano, Kanagawa, Japan)

AJTEC2011-44312

Investigating the Performance of Bi-Porous Disk-Shaped Wick with the Restricted Vapor Space Via

Developing an Electric Analogue Method, ladan Amouzegar, Sean Reilly, Ivan Catton (University of

California, Los Angeles, Los Angeles, CA, United States)

AJTEC2011-44646

Development and Experimental Validation of a Micro-Nano Thermal Ground Plane, Peter de Bock, Shakti

Chauhan, Pramod Chamarthy, Chris Eastman, Boris Russ, Stanton Weaver, Bryan Whalen, Tao Deng (GE

Global Research Center, Niskayuna, NY, United States), Frank Gerner (University of Cincinnati,

Cincinnati, OH, United States), Douglas Johnson, David Courson (Air Force Research Laboratory,

Dayton, OH, United States), Quinn Leland, Kirk L. Yerkes (Air Force Research Laboratory, Wright

Patterson AFB, OH, United States)


1-2-3 Computational Heat and Mass Transfer (Mixed & Natural Convection)

Session Organizer: K. Suga (Osaka Prefecture University, Sakai, Osaka, Japan)

14

AJTEC2011-44419

Linear Stability Analysis for the Onset of Convection During Microwave Heating of Samples Confined

within Horizontal Plates, Tanmay Basak, Madhuchhanda Bhattacharya (Indian Institute of Technology

Madras, Chennai, Tamilnadu, India)

AJTEC2011-44420

Numerical Visualization of Heat Flow and Thermal Mixing in Various Differentially Heated Square

Cavities Using Bejan's Heatlines, Tanmay Basak, Ram Satish Kaluri (Indian Institute of Technology

Madras, Chennai, Tamilnadu, India)

AJTEC2011-44204

Marangoni Convection in Water Isopropanol Mixtures in the Presence of Soret Effect, Ziad Saghir, Md

Abdur Rahman (Ryerson University, Toronto, ON, Canada)

AJTEC2011-44531

Heat Flow Visualization for Natural Convection in Rhombic Enclosures: Bejan's Heatline Approach,

Anandalakshmi R, Tanmay Basak (Indian Institute of Technology Madras, Chennai, Tamilnadu, India)


1-2-8 Computational Heat and Mass Transfer (Industrial Applications) - 1

Session Organizer: Youhei Takagi (Osaka University, Toyonaka, Osaka, Japan)

AJTEC2011-44619

Parametric Fin Array Optimization for Radial Flux Machines Considering Time Varying Loads, Andrew

Semidey, J Rhett Mayor (Georgia Tech, Atlanta, GA, United States)

AJTEC2011-44638

A 3D Numerical Simulation of a Cylindrical Towel Heater with Symmetric and Asymmetric Heating,

Daniel Murray, Jose L. Lage (Southern Methodist University, Dallas, TX, United States)

AJTEC2011-44081

The Model of Temperature Field and Chemical Heterogeneity of Solidifying Ductile-Cast-Iron Roller,

Jana Dobrovska (VSB-Technical University Ostrava, Faculty of Metallurgy and Materials Engineering,

Ostrava, Czech Republic), Frantisek Kavicka, Karel Stransky, Bohumil Sekanina (Brno University of

Technology, Brno, Moravia, Czech Republic)

AJTEC2011-44021

Space-Time-Structure Map for as Cast Massive Rolls, Waldemar Wolczynski (Institute of Metallurgy and

Materials Science, KRAKÓW, Poland), Bogusz Kania (AGH University of Science and Technology,

KRAKÓW, Poland), Wojciech Wajda (Institute of Metallurgy and Materials Science, KRAKÓW, Poland),

Miroslaw Kostrzewa (ECO-HARPOON - Ecological Technologies Coy Ltd, WARSZAWA, Poland)


1-2-14 Computational Heat and Mass Transfer (Industrial Applications) - 2

Session Organizer: Sandip Mazumder (Ohio State University, Columbus, OH, United States)

Session Co-Organizer: Tanmay Basak (Indian Institute of Technology Madras, Chennai, Tamilnadu, India)

AJTEC2011-44013

Common Currency for System Integration of High Intensity Energy Subsystems, David Pratt, David

Moorhouse (USAF, WPAFB, OH, United States)

AJTEC2011-44058

Numerical Optimization of the Casting of Ceramic Material Eucor, Frantisek Kavicka (Brno University of

Technology, Brno, Moravia, Czech Republic), Jana Dobrovska (VSB-Technical University Ostrava,

Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic), Karel Stransky, Bohumil

Sekanina, Josef Stetina (Brno University of Technology, Brno, Czech Republic)

AJTEC2011-44270

Numerical Investigation of the Thermal Behavior in a Hydrogen Tank During Fast Filling Process, Youhei

Takagi (Osaka University, Toyonaka, Osaka, Japan), Naoya Sugie, Kazuhiro Takeda (Shizuoka University,

Hamamatsu, Japan), Yasunori Okano (Osaka University, Toyonaka, Osaka, Japan), Tooru Eguchi,

15

Kazuyuki Hirota (Suzuki Motor Corporation, Hamamatsu, Shizuoka, Japan)

AJTEC2011-44298

Effect of a Pair of Horizontal Frame Members on the Convective Heat Transfer with Laminar and

Turbulent Flow from a Recessed Window to a Room, Patrick Oosthuizen (Queen’s University, Kingston,

ON, Canada), David Naylor (Ryerson University, Toronto, ON, Canada)


1-1-1 Enhanced Convection - 1

Session Organizer: Amanie Abdelmessih (Saint Martin’s University, Lacey, WA, United States)

Session Co-Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States)

Session Co-Organizer: Kyoji Inaoka (Doshisha University, Kyoto, Japan)

AJTEC2011-44020

Convective Heat Transfer Enhancement in Nanofluids: Real Anomaly or Analysis Artifact?, Jacopo

Buongiorno, Lin-wen Hu (Massachusetts Institute of Technology, Cambridge, MA, United States),

Naveen Prabhat (3/17 Vivek Khand Gomti Nagar, Uttar Pradish, India)

AJTEC2011-44049

Influence of Particle Alignment on Thermal Diffusivity in Transformer Cores Made of Polymer Bonded

Soft Magnetic Composites, Mathias Anhalt, Bernd Weidenfeller (Clausthal University of Technology,

Clausthal-Zellerfeld, Germany)

AJTEC2011-44054

Correlation Between Thermal Diffusivity and Dynamic Mechanical Properties of Soft Magnetic Particle

Filled Thermoplastic Composites, Stefan Kirchberg, Mathias Anhalt, Bernd Weidenfeller (Clausthal

University of Technology, Clausthal-Zellerfeld, Niedersachsen, Germany)

AJTEC2011-44127

Detailed Heat Transfer Measurements Inside Rotating Ribbed Channels Using the Transient Liquid

Crystal Technique, Justin Lamont, Srinath Ekkad (Virginia Tech, Blacksburg, VA, United States)



Session Organizer: Qiusheng Liu (Kobe University, Kobe, Japan)

AJTEC2011-44128

An Annular Impinging Jet Alternated by Pulse-Modulated Synthetic Jets, Zdenek Travnicek, Vaclav Tesar

(Institute of Thermomechanics AS CR, Prague 8, Czech Republic)

AJTEC2011-44161

Film-Cooling Performance of Anti-Vortex Hole on a Flat Plate, Christopher LeBlanc, Diganta Narzary,

Srinath Ekkad (Virginia Polytechnic Institute and State University, Blacksburg, VA, United States)

AJTEC2011-44245

Numerical Predictions of Thermal and Hydraulic Performances of Heat Sinks with Enhanced Heat

Transfer Capability, Feng Zhou (Southeast University, Nanjing, Jiangsu, China), Nicholas Hansen, Ivan

Catton (University of California, Los Angeles, Los Angeles, CA, United States)

AJTEC2011-44247

VAT Based Modeling of Plate-Pin Fin Heat Sink and Obtaining Closure from CFD Solution, Feng Zhou

(Southeast University, Nanjing, Jiangsu, China), Nicholas Hansen, Ivan Catton (University of California,

Los Angeles, Los Angeles, CA, United States)



Session Organizer: Kazuya Tatsumi (Kyoto University, Kyoto, Japan)

AJTEC2011-44254

Heat Transfer Augmentation and Suppression in Optimal Rotating Cylinders in Cross-Flow, Tunde

16

Bello-Ochende, Josua P. Meyer, Oluseun I. Ogunronbi (University of Pretoria, Preotia, Gauteng, South

Africa)

AJTEC2011-44266

Heat Transfer Enhancement by Means of a Rotation Cylinder, Daiki Hirawa, Kyoji Inaoka, Mamoru

Senda (Doshisha University, Kyotanabe, Kyoto, Japan)

AJTEC2011-44555

Experimental Analysis of the Single-Phase Heat Transfer and Friction Factor Inside the Horizontal

Internally Micro-Fin Tube, Hou Kuan Tam, Lap Mou Tam (University of Macau, Macau, China), Afshin J.

Ghajar (Oklahoma State University, Stillwater, OK, United States)

AJTEC2011-44495

Investigation of Circular Water Jet Impingement Heat Transfer, Cuicui Liu, Zeyi Jiang, Xinxin Zhang

(University of Science and Technology Beijing, Beijing, China), Qiang Ma, Yusheng Sun (China Aviation

Planning and Construction Development Co, LTD, Beijing, China)

Track 2: Combustion and Energy Systems Track Chair: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan)

Track Co-Chair: S.A. Sherif (University of Florida, Gainesville, FL, United States)

Track Co-Chair: Mohamed El-Genk (University of New Mexico, Albuquerque, United States)

Room: Kona Moku C 10:40-12:00, Monday, March 14

2-2-1 Heat and Mass Transfer in Combustion Systems I - Gasification -

Session Organizer: Kaoru Maruta (Tohoku University, Sendai, Japan)

Session Co-Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)

AJTEC2011-44261

Experimental Study on Polymer Pyrolysis in High-Temperature Air Diluted by H2O an CO2 Using

Stagnation-Point Flow, Yasuhiro Ogami, Makoto Mori, Kentaro Yoshinaga, Hideaki Kobayashi (Institute

of Fluid Science, Tohoku University, Sendai, Japan)

AJTEC2011-44338

Char Y Tar Production from Dairy Biomass Gasification Using Air-Steam for Partial Oxidation, Gerardo

Gordillo (Los Andes University, Bogota, Cundinamarca, Colombia), Kalyan Annamalai (Texas A&M

University, College Station, TX, United States)

AJTEC2011-44308

Comparison of Models Used to Predict the Gas Composition of Mixtures Produces by Gasification of Wax

Palm Husk Using Airsteam for Partial Oxidation, Maria Fernanda Contreras, Gerardo Gordillo (Los

Andes University, Bogota, Cundinamarca, Colombia)

AJTEC2011-44307

Modeling and Simulation of Gasification of Indian Coal and Pet-Coke, Pushpavanam Subramaniam (I.I.T

Madras, Chennai, Tamil Nadu, India), Ankit Bhatnagar (Reliance Industries Limited, Jamnagar, Gujrat,

India)


2-2-2 Heat and Mass Transfer in Combustion Systems II - Flame Dynamics -

Session Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)

Session Co-Organizer: Yasuhiro Ogami (Institute of Fluid Science, Tohoku University, Sendai, Japan)

AJTEC2011-44181

Numerical Simulation on the Instability of Cylindrically Expanding Premixed Flames with Radiative Heat

Loss at Low Lewis Numbers, Satoshi Kadowaki, Takafumi Kusakai (Nagaoka University of Technology,

Nagaoka, Niigata, Japan)

AJTEC2011-44222

Flame Fractal Dimension Induced by Hydrodynamic Instability, Yukari Wada, Kazunori Kuwana

17

(Yamagata University, Yonezawa, Yamagata, Japan)

AJTEC2011-44477

Internal Fire Whirls Induced by Pool Fire in a Vertical Shaft, W.K. Chow (The Hong Kong Polytechnic

University, Hong Kong, China), Yan Huo, Ye Gao (Harbin Engineering University, Heilongjiang, China)

AJTEC2011-44250

Experimental Study on Characteristics of Methane-Coal Dust Mixture Explosion and Its Mitigation by

Ultra-Fine Water Mist, Hongli Xu, Xishi Wang, Rui Gu, Heping Zhang (University of Science &

Technology of China, Hefei, Anhui, China)


2-2-3 Heat and Mass Transfer in Combustion Systems III - Novel Gaseous Combustion -

Session Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)

Session Co-Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)

AJTEC2011-44216

The Effect of Distance Between Fuel and Oxidizer Nozzles on NOx Emission from High Temperature Air

Combustion, Yuzuru Nada, Yasutomo Zenman, Takahiro Ito, Susumu Noda (Toyohashi University of

Technology, Toyohashi, Aichi, Japan)

AJTEC2011-44143

Performance Tests for a Dry Low NOx Combustor Development, Hyung-mo Kim, Poo-min Park,

Soo-seok Yang (Korea Aerospace Research Institute, Daejeon, Korea (Republic)), Young-sung Ko

(Chungnam National University, Daejeon, Korea (Republic))

AJTEC2011-44042

Investigation of the Working Processes in a Gas Turbine Combustor with Steam Injection, Serhiy Serbin,

Anna Mostipanenko (National University of Shipbuilding, Mikolayiv, Ukraine), Igor Matveev (Applied

Plasma Technologies, McLean, VA, United States)

Room: Milo III 10:40-12:00, Monday, March 14

2-4-1 Heat and Mass Transfer in Energy Devices I - Fuel Cell 1-

Session Organizer: Yutaka Tabe (Hokkaido University, Sapporo, Hokkaido, Japan)


AJTEC2011-44416

Influence of Cell Components Structure on Coupling Phenomena in Single Cell of Polymer Electrolyte

Fuel Cell, Akira Nishimura, Atsushi Morimoto, Shigeki Tanaka, Atsushi Oshima, Masafumi Hirota (Mie

University, Tsu, Mie, Japan), Eiji Tohma, Yukio Kimura, Masahiko Narita (TOHO GAS Co., LTD., Tokai,

Aichi, Japan)

AJTEC2011-44369

Improvement of PEFC Cell Performance with a Movable Rib, Hirofumi Tanigawa, Ryoji Hakataya,

Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Japan)

AJTEC2011-44549

Measurement of Water, Temperature and Current Distributions in Anode of Polymer Electrolyte Fuel Cell

During Low Humidity Operation, Kosuke Nishida, Yoma Yokoi, Kazumasa Umed (Kyoto Institute of

Technology, Kyoto, Japan), Shohji Tsushima, Shuichiro Hirai (Tokyo Institute of Technology, Tokyo,

Japan)

AJTEC2011-44510

Analysis of Mass Transport Loss in PEMFC Induced by Rib/Channel Geometry, Yuichiro Tabuchi,

Takeshi Shiomi, Yosuke Fukuyama, Osamu Aoki, Norio Kubo, Kazuhiko Shinohara (Nissan Motor Co.,

Ltd, Yokosuka, Kanagawa, Japan)


2-4-2 Heat and Mass Transfer in Energy Devices II - Fuel Cell 2-

18

Session Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)

Session Co-Organizer: Akira Nishimura (Mie University, Tsu, Mie, Japan)

AJTEC2011-44525

Measurements of Heat and Mass Transport Characteristics Through PEMFC GDL, Takuto Araki,

Nobuyoshi Tachibana, Haruki Kaneko, Koichi Ota (Yokohama National University, Yokohama,

Kanagawa, Japan)

AJTEC2011-44517

Microscopic Observation of Ice Distribution in PEM Fuel Cell at Cold Start, Yutaka Tabe, Masataka Saito,

Ryosuke Ichikawa, Takemi Chikahisa (Hokkaido University, Sapporo, Hokkaido, Japan)

AJTEC2011-44481

Investigation of Liquid Water Behaviors in Carbon Paper GDL for PEMFCs by Soft X-Ray Radiography,

Shohji Tsushima, Takashi Sasabe, Shuichiro Hirai (Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44364

Structural Effects of Cathode Catalyst Layer on the Performance of PEFC, Hidetoshi Matsuda (Tokyo

institute of technology, Meguro-ku, Tokyo, Japan), Atsushi Ohma (Nissan Research Center, Meguro-ku,

Tokyo, Japan), Kazuyoshi Fushinobu, Ken Okazaki (Tokyo institute of technology, Meguro-ku, Tokyo,

Japan)


2-4-4 Heat and Mass Transfer in Energy Devices IV -Micro & Nano Scale Phenomena in Energy Devices-

Session Organizer: Shohji Tsushima (Tokyo Institute of Technology, Tokyo, Japan)

Session Co-Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)

AJTEC2011-44365

Fuel Gas Production by Plasma in a Microwave Oven at Atmospheric Pressure, Shinfuku Nomura (Ehime

University, Matsuyama, Japan), Andi Erwin Eka Putra (Hasanuddin University, Makassar, Indonesia),

Hiromichi Toyota, Shinobu Mukasa, Hiroshi Yamashita (Ehime University, Matsuyama, Japan)

AJTEC2011-44620

Experimental Analysis of Thermal and Electric Transport Characteristics of Nano-Gaps, Kohei Ito,

Tomoaki Hagio (Kyushu University, Fukuoka, Japan), Akira Matsuo, Yasushi Iwaisako (Nippon Tungsten

Co., Ltd., Miyaki-gun, Kiyama-cho, Japan), Osamu Nakabeppu (Meiji University, Kawasaki, Kanagawa,

Japan)

AJTEC2011-44633

Performance Characterization of an Microscale Integrated Combustor Oil Heat Exchanger, Mohammad

Ghazvini, Vinod Narayanan (Oregon State University, Corvallis, OR, United States)

AJTEC2011-44450

Numerical Simulations versus Experimental Data for a Pyroelectric Energy Converter Harvesting Waste

Heat, Brian A. James, Ashcon Navid, Raylene C. Moreno, Laurent Pilon (University of California, Los

Angeles, Los Angeles, CA, United States)

Track 3: Micro/Nano Scale Phenomena Track Chair: Shigeo Maruyama (The University of Tokyo, Tokyo, Japan)

Track Co-Chair: Taku Ohara (Tohoku University, Sendai, Japan)

Track Co-Chair: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States)

Track Co-Chair: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)

Room: Kona Moku A 10:40-12:00, Monday, March 14

3-2-1 Transport Phenomena in Nanoscale Systems for Enhanced Energy Transfer

Session Organizer: Arvind Narayanaswamy (Columbia University, United States)

Session Co-Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan)

AJTEC2011-44607

19

Heat Conduction Effect on Oscillating Heat Pipe Operation, Chris Smoot, Corey Wilson, Hongbin Ma

(University of Missouri, Columbia, MO, United States), Larry Greenberg (Northrop Grumman

Corporation, baltimore, MD, United States)

AJTEC2011-44642

Specification of Micro-Nanoscale Radiative Patterns Using Inverse Analysis for Increasing Solar Panel

Efficiency, Shima Hajimirza (The University of Texas at Austin, Austin, TX, United States), Georges El

Hitti (Mines ParisTech, Paris, Ile de France, France), Alex Heltzel, John Howell (The University of Texas

at Austin, Austin, TX, United States)

AJTEC2011-44635

Analysis of a Graphene/Ultrathin Graphite Heat Exchanger for Aerospace Thermal Management, Alex

Heltzel (PC Krause and Associates, Inc., West Lafayette, IN, United States), Columbia Mishra

(Department of Mechanical Engineering and the Texas Materials Institute, Austin, TX, United States),

Andrew Fleming (U.S. Air Force Research Laboratory, Wright-Patterson Air Force Base, OH, United

States), Rodney S. Ruoff (University of Texas at Austin, Austin, TX, United States)

AJTEC2011-44208

Optimized Ionic Wind-Based Cooling Microfabricated Devices for Improving a Measured Coefficient of

Performance, Andojo Ongkodjojo Ong, Alexis R. Abramson, Norman C. Tien (Case Western Reserve

University, Cleveland, OH, United States)


3-2-2 Transport Phenomena in Nanostructures for Energy Systems


Session Co-Organizer: Mitsuhiro Matsumoto (Kyoto University, Kyoto, Japan)

AJTEC2011-44492

Electromagnetic Energy Transport in Multi-Layered Nanoshell Cluster, Changhong Liu (Shanghai Jiao

Tong University, Shanghai, China), Ben Q. Li (University of Michigan, Dearborn, MI, United States)

AJTEC2011-44526

Ion Transport in Mesoporous Silica Thin Films, Hirofumi Daiguji, Daisuke Nakayama, Asuka Takahashi

(The University of Tokyo, Kashiwa, Chiba, Japan), Sho Kataoka, Akira Endo (National Institute of

Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan)

AJTEC2011-44195

A Molecular Dynamics Study for Diffusivity of Proton in Polymer Electrolyte Membrane, Takashi

Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan), Taiki Yoshida (Graduate

School of Engineering, Tohoku University, Sendai, Miyagi, Japan)


3-2-3 Transport Analysis for Nanoscale Energy Systems


Session Co-Organizer: Kenji Yasuoka (Keio University, Yokohama, Kanagawa, Japan)

AJTEC2011-44504

NEGF Quantum Simulation of Field Emission Devices, Terence Musho, D. G. Walker, S. M. Claiborne

(Vanderbilt University, Nashville, TN, United States)

AJTEC2011-44309

Control of Dielectric Fluid Flow Distribution in Micro-Tubes with EHD Conduction Pumping -

Numerical Study, Miad Yazdani (United Technologies Research Centre, East Hartford, CT, United States),

Jamal Yagoobi (Illinois Institute of Technology, Chicago, IL, United States)

AJTEC2011-44239

Investigating the Effect of Pipe Inclination on Two-Phase Gas-Liquid Flows Using Advanced

Instrumentation, Abolore Abdulahi, Lokman Abdulkareem, Sharaf Safa, Mukhtar Abdulkadir, Valente

Hernandez Perez, B.J. Azzopardi (University of Nottingham, Nottingham, Nottingham, United Kingdom)

20

Room: Kona Moku B 10:40-12:00, Monday, March 14

3-1-1 Phonon Transport in Nano and Molecular Systems

Session Organizer: Xinwei Wang (Iowa State University, Ames, IA, United States)

Session Co-Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)

AJTEC2011-44341

Phonon Transport in Asymmetric Sawtooth Nanowires, Nick Roberts, D. G. Walker (Vanderbilt University,

Nashville, TN, United States)

AJTEC2011-44129

A Hybrid SN-PN Formulation for Solution of the Boltzmann Transport Equation for Phonons, Arpit Mittal,

Sandip Mazumder (Ohio State University, Columbus, OH, United States)

AJTEC2011-44111

Excitation of Single Phonon Modes in Nanoscale Waveguides, Drew A. Cheney, Jennifer R. Lukes

(University of Pennsylvania, Philadelphia, PA, United States)

AJTEC2011-44060

Direct Simulation of the Nonlinear Boltzmann Transport Equation for Phonons, Yusuke Masao, Mitsuhiro

Matsumoto (Kyoto University, Kyoto, Japan)


3-1-2 Boundary Resistance and Conductance

Session Organizer: Xiulin Ruan (Purdue University, West Lafayette, IN, United States)

Session Co-Organizer: Yasutaka Yamaguchi (Osaka University, Suita, Osaka, Japan)

AJTEC2011-44314

Assesment of Vibrational Coupling at Solid-SAM-Solid Junctions, Christopher B. Saltonstall, John C.

Duda, Pamela Norris (University of Virginia, Charlottesville, VA, United States), Patrick Hopkins

(Sandia National Labs, Albuquerque, NM, United States)

AJTEC2011-44478

A Molecular Dynamics Study on Heat Transfer Characteristics over the Interface of Self-Assembled

Monolayer and Water Solvent, Gota Kikugawa, Taku Ohara (Tohoku University, Sendai, Japan), Toru

Kawaguchi, Ikuya Kinefuchi, Yoichiro Matsumoto (The University of Tokyo, Tokyo, Japan)

AJTEC2011-44643

A Quantum Mechanical Study of the Thermal Conduction Across a ZrB2-SiC Interface as a Function of

Temperature and Strain, Vikas Samvedi, Vikas Tomar (Purdue University, West Lafayette, IN, United

States)

AJTEC2011-44351

Slip Due to Rarefaction, Surface Roughness, and Intermolecular Interactions for Gases and Liquids,

Phillip Ligrani (Saint Louis University, St. Louis, MO, United States)


3-1-3 Boundary Resistance and Thermal Conductivity of Complex Molecular Systems

Session Organizer: Yuji Nagasaka (Dept. of System Design Eng., Keio University, Yokohama, Japan)

Session Co-Organizer: Xiulin Ruan (Purdue University, West Lafayette, IN, United States)

AJTEC2011-44600

Molecular Dynamics of Thermal Boundary Resistance Between a Carbon Nanotube and Surrounding

Fluids, Jin Hyeok Cha, Shohei Chiashi, Jun-ichiro Shiomi, Shigeo Maruyama (Department of Mechanical

Engineering, The University of Tokyo, Tokyo, Japan)

AJTEC2011-44320

Contact Thermal Resistance Between Individual Multi-Wall Carbon Nanotubes, Juekuan Yang, Scott

Waltermire, Yang Yang, Deyu Li (Vanderbilt University, Nashville, TN, United States), Yunfei Chen

(Southeast University, Nanjing, Nanjing, Jiangsu Province, China)

AJTEC2011-44465

21

Effect of Alkyl Chain Length on Molecular Heat Transfer Characteristics in Lipid Bilayers, Takeo Nakano,

Gota Kikugawa, Taku Ohara (Tohoku University, Sendai, Japan)

AJTEC2011-44656

Atomistic Scale Thermal Transport in Amorphous Materials and Its Interfaces, A. K. Roy (Air Force

Research Laboratory, Wright-Patterson, OH, United States), Vikas Varshney, Jonghoon Lee (Universal

Technology Corporation, Dayton, OH, United States), Sabyasachi Ganguli, Sangwook Sihn (University of

Dayton Research Institute, Dayton, OH, United States), Barry Farmer (Air Force Research Laboratory,

Wright-Patterson AFB, OH, United States)

Room: Milo IV&V 10:40-12:00, Monday, March 14

3-3-1 Experimental Techniques for Micro- and Nanoscale Property Measurements - 1

Session Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States)

Session Co-Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Hiroshima, Japan)

AJTEC2011-44340

Measurements of the Intrinsic Thermal Conductivity of Individual Multi-Wall Carbon Nanotubes,

Juekuan Yang, Scott Waltermire, Yang Yang, Deyu Li (Vanderbilt University, Nashville, TN, United States),

Yunfei Chen (Southeast University, Nanjing, Nanjing, Jiangsu Province, China)

AJTEC2011-44380

Development of the Thermal Flash Method for Characterization of Carbon Nanofibers, Nayandeep K.

Mahanta, Alexis R. Abramson (Case Western Reserve University, Cleveland, OH, United States)

AJTEC2011-44421

Infrared Imaging Microscope as an Effective Tool for Measuring Thermal Resistance of Emerging

Interface Materials, Andrew McNamara, Vivek Sahu, Yogendra Joshi, Zhuomin Zhang (Georgia Institute

of Technology, Atlanta, GA, United States)

AJTEC2011-44097

Raman and Infrared Thermometry for Microsystems, Leslie Phinney (Sandia National Laboratories,

Albuquerque, NM, United States), Wei-Yang Lu (Sandia National Laboratories, Livermore, CA, United

States), Justin R. Serrano (Sandia National Laboratories, Albuquerque, NM, United States)


3-3-2 Experimental Techniques for Micro- and Nanoscale Property Measurements - 2

Session Organizer: Bong Jae Lee (University of Pittsburgh, Pittsburgh, PA, United States)

Session Co-Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)

AJTEC2011-44489

Femtogram-Level Thermophysical Property Measurement of Polymeric Samples Using Heated

Microcantilevers, Andrew Gauffreau, Keunhan (Kay) Park (University of Rhode Island, Kingston, RI,

United States)

AJTEC2011-44508

A Platform for Thermal Property Measurements and Transmission Electron Microscopy of Nanostructures,

Tom Harris, Julio Martinez, Eric Shaner, Brian S. Swartzentruber, Jianyu Huang, John Sullivan (Sandia

National Laboratories, Albuquerque, NM, United States), Gang Chen (Massachusetts Institute of

Technology, Cambridge, MA, United States)

AJTEC2011-44574

High-Speed Transient Temperature Profile Control Using Adjoint-Based Optimal Control Scheme, Satoru

Ito, Yuji Suzuki (The University of Tokyo, Tokyo, Japan)

AJTEC2011-44302

Development and Characterization of an Electroplated Copper Nickel Alloy-Platinum

Micro-Thermocouple, Chan Ching, Simon Loane, Ravi Selvaganapathy, Chan Ching (McMaster

University, Hamilton, ON, Canada)

22


3-3-13 Phase Change Materials, Condensation, and Combustion

Session Organizer: Hirofumi Daiguji (The University of Tokyo, Kashiwa, Chiba, Japan)

Session Co-Organizer: Yoav Peles (R.P.I., Troy, NY, United States)

AJTEC2011-44230

High Temperature Thermal Characterization of Ge(2)Sb(2)Te(5) for Phase Change Memory, Jaeho Lee

(Stanford University, Stanford, CA, United States), John P. Reifenberg (Intel Corporation, Santa Clara,

CA, United States), Mehdi Asheghi, Kenneth Goodson (Stanford University, Stanford, CA, United States)

AJTEC2011-44226

Numerical Study of Performance Enhancement of Single-Shot Heat Sinks Using Nano-Enhanced Phase

Change Material, Ingrid Cotoros, Ab Hashemi (Lockheed Martin, Advanced Technology Center, Palo

Alto, CA, United States)

AJTEC2011-44050

Thermal Properties of Polyurethane Shape Memory Polymer Filled with Magnetite Particles, Bernd

Weidenfeller (Clausthal University of Technology, Clausthal-Zellerfeld, Germany), Hauke Marquardt

(German Research Center for Geosciences GFZ, Potsdam, Germany), Muhammad Y. Razzaq

(Helmholtz-Zentrum Geesthacht, Teltow, Germany), Mathias Anhalt (Clausthal University of Technology,

Clausthal-Zellerfeld, Germany), Lars Frormann (Fachhochschule Zwickau, Zwickau, Germany), Frank R.

Schilling (Karlsruhe Institute of Technology, Karlsruhe, Germany)

AJTEC2011-44342

Observation of Micro Premixed Flames Surrounded by High Temperature Burned Gas Flow, Manabu

Fuchihata, Tamio Ida (Kinki University, Higashi-Osaka, Osaka, Japan), Kazunori Kuwana (Yamagata

University, Yonezawa, Yamagata, Japan), Satoru Mizuno (Kinki University, Higashi-Osaka, Osaka,

Japan)

23

Tuesday, March 15



Room: Kona Moku 9:00-9:40, Tuesday, March 15

4-1-1 Keynote - 3

Session Organizer: Jungho Kim (University of Maryland, College Park, MD, United States)

AJTEC2011-44005

Two-Phase Micro-Channel Heat Sinks: Theory, Applications and Limitations, Issam Mudawar (Purdue

University, West Lafayette, IN, United States)

Room: Kona Moku 9:40-10:20, Tuesday, March 15

4-1-2 Keynote - 4

Session Organizer: Roy Hogan (Sandia National Laboratories, Albuquerque, NM, United States)

AJTEC2011-44645

Spacecraft Thermal Management, Bruce Drolen (The Boeing Company, Los Angeles, United States)




Room: Honolulu 10:40-12:00, Tuesday, March 15

1-4-2 Heat Pipe, Evaporator, Condenser, Thermal Cycle - 1

Session Organizer: Akio Tomiyama (Kobe University, Kobe, Japan)

Session Co-Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)

AJTEC2011-44015

The Constrained Vapor Bubble Experiment - Results From the International Space Station, Arya

Chatterjee, Joel Plawsky, Peter Wayner, Jr. (Rensselaer Polytechnic Institute, Troy, NY, United States),

David F. Chao, Ronald J. Sicker (NASA Glenn Research, Cleveland, OH, United States), Louis Chestney,

Tibor Lorik, John Eustace, John Zoldak (Zin Technologies, Cleveland, OH, United States)

AJTEC2011-44190

Liquid Film Thickness of Oscillating Flow in a Micro Tube, Youngbae Han, Naoki Shikazono, Nobuhide

Kasagi (The University of Tokyo, Tokyo, Japan)

AJTEC2011-44010

Experimental Adiabatic Two-Phase Pressure Drops of R134a, R236fa and R245fa in Small Horizontal

Circular Channels, Chin Lee Ong (IBM Zurich Research Laboratory, Ruschliklon, Switzerland), John R.

Thome (Ecole Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland)

AJTEC2011-44262

Effects of Pitch and Depth on the Condensation Heat Transfer of R-134a Flowing Through Corrugated

Tubes, Suriyan Laohalertdecha, Somchai Wongwises (King Mongkut’s University of Technology

Thonburi, Bangkok, Thailand)

24

Room: Honolulu 13:40-15:00 Tuesday, March 15

1-4-7 Heat Pipe, Evaporator, Condenser, Thermal Cycle - 2

Session Organizer: Ali Siahpush (INL, Idaho Falls, ID, United States)

Session Co-Organizer: Tomoaki Kunugi (Kyoto University, Kyoto, Japan)

AJTEC2011-44258

Flashing Flow Mechanisms of HFC-134a and HFC-410a Through Short-Tube Orifices, Kitti Nilpueng,

Somchai Wongwises (King Mongkut’s University of Technology Thonburi, Bangkok, Thailand)

AJTEC2011-44267

Comparison of Various Alternative Refrigerants for Vapour Compression Refrigeration Systems, Ahmet

Selim Dalkilic (Yildiz Technical University, Istanbul, Turkey), Somchai Wongwises (King Mongkut’s

University of Technology Thonburi, Bangkok, Thailand)

AJTEC2011-44119

Neutron Imaging Feasibility of Liquid Metal Coolant Behaviors Inside a High Temperature Alloy Heat

Pipe, Kenneth Kihm (University of Tennessee, Knoxville, TN, United States), Daniel Hussey (National

Institute of Standards and Technology, Gaitherburgh, MD, United States), David Pratt (USAF, WPAFB,

OH, United States), Andrew Swanson (AFRL/RBSA, Wright-Patterson AFB, OH, United States)

Room: Honolulu 15:20-16:40 Tuesday, March 15

1-4-4 Boiling Heat Transfer

Session Organizer: M. Erol Ulucakli (Lafayette College, Easton, PA, United States)

Session Co-Organizer: Hisato Minagawa (The University of Shiga Prefecture, Siga, Japan)

AJTEC2011-44519

Heat Transfer Characteristics of Isolated Bubble Nucleate Boiling of Water, Tomohide Yabuki, Osamu

Nakabeppu (Meiji University, Kawasaki, Japan)

AJTEC2011-44045

Pool Boiling Heat Transfer of Highly Wetting Fluids on Smooth Metallic Surfaces, Bradley Bon, James

Klausner (University of Florida, Gainesville, FL, United States)

AJTEC2011-44401

Numerical Study on Subcooled Pool Boiling, Yasuo Ose, Tomoaki Kunugi (Kyoto University, Kyoto,

Japan)

AJTEC2011-44408

Enhancement of Saturation Boiling of PF-5060 on Microporous Surface, Saeil Jeon, Byeongnam Jo,

Debjyoti Banerjee (Texas A&M University, College Station, TX, United States)

Room: Kou 10:40-12:00 Tuesday, March 15

1-8-5 Instrumentation - II

Session Organizer: Raj M. Manglik (University of Cincinnati, Cincinnati, OH, United States)

Session Co-Organizer: Atsuki Komiya (Tohoku University, Sendai, Miyagi, Japan)

AJTEC2011-44287

Phosphor Thermometry by Using Rare Earth-Doped Yttrium Oxides, Naohiro Ishiwada (Keio University,

Tokyo, Japan), Satoko Fujioka, Toshihisa Ueda, Takeshi Yokomori (Keio University, Kanagawa, Japan)

AJTEC2011-44639

Magnetic Resonance Imaging Techniques for Measuring Film Cooling Flow Velocity and Effectiveness,

Christopher J. Elkins, Emin Issakhanian, John K. Eaton (Stanford University, Stanford, CA, United

States)

AJTEC2011-44461

Microscopic Fluid Temperature Measurements Using Fluorescence Polarization Method, Kazuya Tatsumi,

Akihisa Tozaki, Kazuyoshi Nakabe (Kyoto University, Kyoto, Kyoto, Japan)

AJTEC2011-44612

Electric Charge of Micro and Nano Bubbles by Interferometric Laser Imaging Technique, Tomohiro

25

Sekiguchi, Tatsuya Kawaguchi, Isao Satoh, Takushi Saito (Tokyo Institute of Technology, Tokyo, Japan)

Room: Kou 13:40-15:00 Tuesday, March 15

1-8-3 Diagnostics

Session Organizer: Kazuyoshi Nakabe (Kyoto University, Kyoto, Japan)

AJTEC2011-44444

Evaluation of Gas Permeability in Microfluidic Devices by Confocal Micro-PIV Combined with LIF

Technique, Mitsuhisa Ichiyanagi (The University of Tokyo, Tokyo, Japan), Keita Sakai, Shinya Kidani,

Yasuhiro Kakinuma, Yohei Sato, Koichi Hishida (Keio University, Yokohama, Japan)

AJTEC2011-44485

Impact of Interstitial Mass Transport Resistance on Water Vapor Diffusion Through Southern Mills

DefenderTM

750 Fabric Layers, Anshul Sharma (University of Texas - Austin, Austin, TX, United States),

Sandra Boetcher (University of North Texas, Denton, TX, United States), Walid Aissa (King AbdulAziz

University, Faculty of Engineering at Rabigh, Rabigh, Saudi Arabia), Matthew Traum (University of

North Texas, Denton, TX, United States)

AJTEC2011-44232

Evaluation of Effective Thermal Conductivity of Multilayer Printed Circuit Board, Yasushi Koito, Toshio

Tomimura, Yoshihiro Shiotsu (Kumamoto University, Kumamoto, Japan), Masaru Ishizuka, Tomoyuki

Hatakeyama (Toyama Prefectural University, Toyama, Japan)

AJTEC2011-44557

Validation of a Thermal Conductivity Measurement System for Fuel Compacts, Colby Jensen, Changhu

Xing, Heng Ban (Utah State University, Logan, UT, United States), Jeffrey Phillips (Idaho National

Laboratory, Idaho Falls, ID, United States)

Room: Waikiki 1 10:40-12:00 Tuesday, March 15

1-3-10 Condensation and Miscellaneous

Session Organizer: Niro Nagai (University of Fukui, Fukui, Japan)

Session Co-Organizer: Peter de Bock (GE Global Research Center, Niskayuna, NY, United States)

AJTEC2011-44532

Study on Condensation Heat Transfer of Micro Structured Surfaces (Effect on Condensation Heat Transfer

of Metal-Spattering Surfaces), Hiroyasu Ohtake, Takeru Komatsu (Kogakuin University, Tokyo, Japan),

Yasuo Koizumi (Shinshu University, Ueda, Nagano, Japan)

AJTEC2011-44155

Cooling-Induced Depressurization of a Steam-Filled Chamber, Pengfei He, Chao Zhu (New Jersey

Institute of Technology, Newark, NJ, United States), Chao-Hsin Lin (Boeing Commercial Airplanes,

Seattle, WA, United States), Rajesh Patel (New Jersey Institute of Technology, Newark, NJ, United States)

AJTEC2011-44502

Effects of Local Concentration on Freezing Solutions of Winter Flounder Antifreeze Protein, Yoshimichi

Hagiwara (Kyoto Institute of Technology, Kyoto, Sakyo-ku, Japan), Ryo Sakurai (Fujitsu, Kumagaya,

Japan), Daichi Yamamoto, Atsuhide Kitagawa (Kyoto Institute of Technology, Kyoto, Sakyo-ku, Japan)

AJTEC2011-44092

Functional Materials for Energy Storage: Fabrication of Shape Stabilized Polymeric Phase Change

Composites and the Determination of Their Thermophysical Properties for Use in Energy Conservation

Applications, Anjum Saleem, Lars Frormann (University of Applied Sciences, Zwickau, Germany)


1-3-11 Pool Boiling - 1

Session Organizer: Masanori Monde (Saga University, Saga, Japan)

Session Co-Organizer: Jungho Kim (University of Maryland, College Park, MD, United States)

AJTEC2011-44122

26

Effect of the Bottom and Top Configurations on Pool Film Boiling Around a Vertical Finite-Length

Cylinder, Satoru Momoki, Kenichi Araki, Toru Shigechi, Takashi Yamada (Nagasaki University, Nagasaki,

Japan), Kaoru Toyoda (Maizuru National College of Technology, Kyoto, Japan), Tomohiko Yamaguchi,

Odgerel Jambal (Nagasaki University, Nagasaki, Japan)

AJTEC2011-44084

Water-Heating Pool Boiling of Different Refrigerants on a Horizontal Smooth Tube, Tailian Chen

(Gonzaga University, Spokane, WA, United States)

AJTEC2011-44449

On the Scaling of Pool Boiling Heat Flux with Gravity and Heater Size, Jungho Kim, Rishi Raj (University

of Maryland, College Park, MD, United States), John McQuillen (NASA Glenn Research Center,

Cleveland, OH, United States)

AJTEC2011-44498

Concerning the Effect of Surface Material on Nucleate Boiling Heat Transfer of R-113, Reza Hosseini,

Amir Gholaminejad, Mahdi Nabil (Amirkabir University of Technology, Tehran, Tehran, Iran),

Mohammad Hossein Samadinia (The Islamic Azad University, West Tehran Branch, Tehran, Tehran, Iran)


1-3-4 Pool Boiling - 2

Session Organizer: Lars Frormann (Fachhochschule Zwickau, Zwickau, Germany)

Session Co-Organizer: Yasuo Koizumi (Shinshu University, Ueda, Nagano, Japan)

AJTEC2011-44286

Interaction of Liquid and Heating Surface During Nucleate Boiling Processes, Juris Ekmanis (Latvian

Academy of Sciences, Institute of Physical Enegetics, Riga, Latvia), Daniels Turlajs (Riga Technical

University, Riga, Latvia), Namejs Zeltins (Latvian Academy os Sciences, Institute of Physical Energetics,

Riga, Latvia), Sigurds Jaundalders (Riga Technical University, Riga, Latvia)

AJTEC2011-44593

Enhancement of Pool Boiling and Critical Heat Flux in Self-Rewetting Fluids at Above Atmospheric

Pressures, Mostafa Morovati, Hitesh Bindra (City College of New York, New York, NY, United States),

Shuji Esaki (Kagoshima National College of Technology, Kirishima, Kagoshima, Japan), Masahiro

Kawaji (City College of New York, New York, NY, United States)

AJTEC2011-44065

Experimental Research of Boiling Heat Transfer Phenomena on Metal Surface in State of Low

Gravitational Acceleration Field Between 0 g and 1 g, Eiji Nemoto (Ibaraki National College of

Technology, Hitachinaka, Ibaraki, Japan), Tomohiro Saitoh (NAZKA Aerospace Engineering Aerosopace

Design, Nagoya, Aichi, Japan)


1-2-7 Computational Heat and Mass Transfer (Heat Conduction & Diffusion) - 1


Session Co-Organizer: Ichiro Ueno (Tokyo University of Science, Noda, Chiba, Japan)

AJTEC2011-44237

Analysis of One-Dimensional Hyperbolic Heat Conduction in a Functionally Graded Thin Plate,

Mohammad Reza Raveshi, Shayan Amiri, Ali Keshavarz (K.N.Toosi University of Technology, Tehran,

Iran)

AJTEC2011-44177

Numerical Simulation of the Cooling Process of Cubic Shells, Manabu Okura (Tsurumi Industrial High

School, Yokohama, Japan), Kiyoaki Ono (Nihon University, Tokyo, Japan)

AJTEC2011-44167

Heat Transfer Between Colliding Surfaces and Particles, Like Li, Renwei Mei, James Klausner, David

Hahn (University of Florida, Gainesville, FL, United States)

27


1-2-13 Computational Heat and Mass Transfer (Heat Conduction & Diffusion) - 2

Session Organizer: Baratunde Cola (Georgia Institute of Technology, Atlanta, GA, United States)

Session Co-Organizer: Kazuya Tatsumi (Kyoto University, Kyoto, Kyoto, Japan),

Session Co-Organizer: Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States)

AJTEC2011-44276

Thermal Conductivity of Cage-Like Structures, Mona Zebarjadi, Keivan Esfarjani, Gang Chen

(Massachusetts Institute of Technology, Cambridge, MA, United States)

AJTEC2011-44578

Numerical Simulation of Heat and Mass Transfer of Limestone Decomposition in Lime Kiln, Do Duc Hai

(University Magdeburg, Magdeburg, Germany), Eckehard Specht (Otto-von-Guericke-Universität

Magdeburg, Magdeburg, Germany)

AJTEC2011-44343

Thermal Properties of Yttrium Aluminum Garnett from Molecular Dynamics Simulations, Majid

al-Dosari, D. G. Walker (Vanderbilt University, Nashville, TN, United States)


1-1-2 Non-Newtonian Convection

Session Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States)

Session Co-Organizer: Kazuyoshi Nakabe (Kyoto University, Kyoto, Japan)

AJTEC2011-44462

Structure of Low-Speed Streaks in Drag Reducing Flow with Polymer Solution Blown From the Channel

Wall, Hening Xu, Shota Ishitsuka, Masaaki Motozawa (Tokyo University of Science, Noda, Chiba, Japan),

Kaoru Iwamot (Tokyo University of Agriculture and Technology, Koganei, Tokyo, Japan), Hirotomo

Ando, Tetsuya Senda (National Maritime Research Institute, Mitaka, Tokyo, Japan), Bo Yu (China

University of Petroleum, Beijing, China), Yasuo Kawaguchi (Tokyo University of Science, Noda, Chiba,

Japan)

AJTEC2011-44464

Simultaneous PIV and PLIF Measurement on the Drag Reducing Channel Flow of the Homogeneous

Surfactant Solution, Takahiro Watanabe, Kohei Tanaka, Masaaki Motozawa, Yasuo Kawaguchi (Tokyo

University of Science, Noda, Chiba, Japan)

AJTEC2011-44542

Intertube Falling-Film Heat Transfer Behavior of Multiwall Carbon Nanotube Suspensions (MWCNT

Nanofluids), Binglu Ruan (Tsinghua University/University of Illinois/Xi’an Jiaotong University,

Beijing/Urbana/Xi’an, China), Anthony M Jacobi (University of Illinois, Urbana, IL, United States)


1-1-4 Natural Convection - 1

Session Organizer: Alex da Silva (University of Texas at Austin, Austin, TX, United States)

Session Co-Organizer: Yasuo Kawaguchi (Tokyo University of Science, Noda, Japan)

AJTEC2011-44636

The Effects of Solid Thermal Conductivity and Volume-Fraction in the Natural Convection Inside a

Heterogeneous Enclosure, Fernando C. De Lai, Admilson T. Franco, Silvio L. M. Junqueira (Federal

Technological University of Parana, Curitiba, Paraná, Brazil), Jose L. Lage (Southern Methodist

University, Dallas, TX, United States)

AJTEC2011-44493

An Experimental Study of Heat Transfer From Small Horizontal Cylinders at Near-Critical Pressures,

Yohann Rousselet (INSA Lyon, Lyon, Villeurbanne Cedex, France), Gopinath Warrier, Vijay K. Dhir

(University of California, Los Angeles, Los Angeles, CA, United States)

AJTEC2011-44507

28

Whole Field Temperature and Velocity Measurements for Two-Phase Flow Using PIV/LIF, Carlos E.

Estrada-Perez (Texas A&M University, College Station, US Outlying Is), Sinchao Tan (Harbin

Engineering University, Harbin, Heilongjiang, China), Yassin Hassan (Texas A&M University, College

Station, TX, United States)

AJTEC2011-44552

Laminar Natural Convection From Vertical Cylinders: a Revisit to a Classical Subject, Jerod C. Day,

Matthew Traum, Sandra Boetcher (University of North Texas, Denton, TX, United States)


1-1-11 Natural Convection - 2

Session Organizer: Takashi Masuoka (Kyushu University, Fukuoka, Japan)

AJTEC2011-44604

Natural Convection Heat Transfer of Concentric/Eccentric Annulus Subjected to Inner Tube of Constant

Heat Flux, Reza Hosseini, Mahdi Alipour, Amir Gholaminejad (Amirkabir University of Technology,

Tehran, Tehran, Iran)

AJTEC2011-44411

Effect of Inner Pipe Rotation on Natural Convection Heat Transfer of Concentric Pipes, Reza Hosseini,

Amir Gholaminejad, Mahdi Alipour (Amirkabir University of Technology, Tehran, Tehran, Iran)

AJTEC2011-44409

Transport Process by Natural Convection and Molecular Diffusion of Two Component Gases in a

Stratified Fluid Layer, Tetsuaki Takeda, Hirotaka Isomi, Hiroki Hanazawa (University of Yanamashi,

Kofu, Yamanashi, Japan)

AJTEC2011-44452

Scaling of Transient Natural Convection Cooling in a Side-Cooled Cavity - The Effect of Variable

Viscosity, Obai Younis Taha Elamin (Taylors University College, Subang Jaya, Selangor, Malaysia), Feng

Xu, Chengwang Lei, John Patterson (University of Sydney, Sydney, Australia), Jordi Pallares, Francesc

Xavier Grau (Universitat Rovira i Virgili, Tarragona, Spain)


1-1-5 Natural/Mixed Convection

Session Organizer: Yaroslav Chudnovsky (Gas Technology Institute, Des Plaines, IL, United States)

Session Co-Organizer: Tetsuaki Takeda (University of Yamanashi, Yamanashi, Japan)

AJTEC2011-44191

Literature Review of Single Phase Internal Flow Heat Transfer Correlations in Straight Circular Conduits,

Amanie Abdelmessih, Erik McGuire (Saint Martin’s University, Lacey, WA, United States)

AJTEC2011-44174

An Experimental Study on Mixed Convection Heat Transfer for Thermally Developing Flow in

Horizontal Ducts with Radiation Effects, Rajamohan Ganesan (Curtin University of Technology, Miri,

Malaysia), Ramesh Narayanaswamy (Curtin University of Technology, Perth, Australia), Alexander

Gorin, Kumar Perumal (Curtin University of Technology, Miri, Malaysia)

AJTEC2011-44225

Natural Convection Heat Transfer in Vertical Fluid Layers of High Aspect Ratio, Takashi Masuoka

(Kyushu University, Fukuoka, Japan), Yasushi Kakimoto (Shizuoka University, Hamamatsu, Japan),

Hirokazu Ito, Koichi Inoue (University of Kitakyushu, Kitakyushu, Japan)

AJTEC2011-44227

Numerical Study of Thermal Convection in Boussinesq Stokes Suspension Occupying a Rectangular Box,

Manjunath Sreeramaiah, Chandrashekara Nazare Panduranga Rao (B.N.M. Institute of Technology,

Bangalore, Karnataka, India)

29




Room: Kona Moku B 13:40-15:00 Tuesday, March 15

2-1-1 Heat and Mass Transfer in Turbulent Combustion I

Session Organizer: Tatsuya Hasegawa (Nagoya University, Nagoya, Japan)

Session Co-Organizer: Alex Brown (Sandia National Labs, Albuquerque, NM, United States)

AJTEC2011-44039

An Experimental Study on Properties of Local Burning Velocity for Hydrogen Added Hydrocarbon

Premixed Turbulent Flames, Masaya Nakahara (Ehime University, Matsuyama, Japan), Jun Hashimoto

(Tsuyama National College of Technology, Tsuyama, Japan), Atsushi Ishihara (Saitama Institute of

Technology, Fukaya, Japan), Koich Murakami (Ehime University, Matuyama, Japan)

AJTEC2011-44221

Study of Thermo-Diffusive Effects on Iso-Octane/Air Flames at Fixed Turbulence Karlovitz Number,

Akihiro Hayakawa, Tomohiro Takeo, Yukito Miki, Yukihide Nagano, Toshiaki Kitagawa (Kyushu


AJTEC2011-44472

Flow-Geometry and Reynolds-Number Effects on Flame-Turbulence Interactions, Yuki Minamoto (Tokyo

Institute of Technology, Tokyo, Japan), Yuzuru Nada (Toyohashi University of Technology, Aichi, Japan),

Masayasu Shimura, Naoya Fukushima, Youngsam Shim, Mamoru Tanahashi, Toshio Miyauchi (Tokyo

Institute of Technology, Tokyo, Japan)

AJTEC2011-44587

Analysis of Thermocouple Responses to Turbulent Radiating Environments, OA Ezekoy, Craig

Weinschenk (University of Texas at Austin, Austin, TX, United States)


2-1-2 Heat and Mass Transfer in Turbulent Combustion II

Session Organizer: Leiyong Jiang (NRCC, Ottawa, ON, Canada)

Session Co-Organizer: Hideaki Kobayashi (Tohoku University, Sendai, Japan)

AJTEC2011-44294

DNS Analysis on Local Burning Velocity and Flame Displacement Speed of Turbulent Premixed Flames

with Different Density Ratio, Kazuya Tsuboi (Okayama University, Okayama, Japan), Tatsuya Hasegawa

(Nagoya University, Nagoya, Japan)

AJTEC2011-44479

Measurements of Fuel Concentration and Temperature Distributions in Lean Premixed Flame with

Swirling Flow, Masaharu Komiyama, Kenichiro Takeishi, Kazumi Araki (Osaka University, Suita, Osaka,

Japan)

AJTEC2011-44441

Local Quenching Recovery Processes of Premixed and Diffusion Interacting Flames in a Turbulent

Opposite Flow, Ikuyo Makino, Takayuki Kawanami (Tohoku University, Aoba-ku Sendai, Japan), Yuji

Yahagi (Shibaura Institute of Technology, Tokyo, Japan)

AJTEC2011-44585

Comparison of Accuracy and Computational Expense of Radiation Models in Simulation of

Non-Premixed Turbulent Jet Flames, Gopalendu Pal (University of California, Merced, Merced, CA,

United States), Ankur Gupta (The Pennsylvania State University, University Park, PA, United States),

Michael Modest (University of California, Merced, Merced, CA, United States), Daniel C Haworth (The

Pennsylvania State University, University Park, PA, United States)

30

Room: Kona Moku C 10:40-12:00 Tuesday, March 15

2-2-4 Heat and Mass Transfer in Combustion Systems IV - Coal and Biomass Combustion I -

Session Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)

Session Co-Organizer: Satoshi Kadowaki (Nagaoka University of Technology, Nagaoka, Niigata, Japan)

AJTEC2011-44608

Parametric Studies on PCI Performances, Dong Fu, Chenn Zhou, Dezhi Zheng (Purdue University

Calumet, Hammond, IN, United States), Kyle Ferron (United States Steel Canada, Hamilton, ON, Canada),

Yongfu Zhao (United States Steel, Munhall, PA, United States), John D’Alessio (United States Steel

Canada, Hamilton, ON, Canada)

AJTEC2011-44180

Deveropment of Advanced Combustor for Biomass, Masato Urashima, Shuichii Torii (Kumamoto

University, Kumamoto, Japan)

AJTEC2011-44093

Fluidised Bed Combustion of Blends of Coal and Pressed Sugar Beet Pulp, John Ward, Muhammad Akram,

Roy Garwood (University of Glamorgan, Pontypridd, Wales, United Kingdom)


2-2-5 Heat and Mass Transfer in Combustion Systems V - Coal and Biomass Combustion II -

Session Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)

Session Co-Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)

AJTEC2011-44205

Detecting Burner Instabilities Using Joint-Time Frequency Methods Whilst Co-Firing Coal and Biomass,

Palani Valliappan, Shee Meng Thai, Steven Wilcox, John Ward (University of Glamorgan, Pontypridd,

Wales, United Kingdom), Chee K Tan (University of Glamorgan, Rhondda Cynon Taff, Wales, United

Kingdom), Krzysztof Jagiello (Institue of Power Engineering, Warsaw, Poland)

AJTEC2011-44182

Reburning of Cattle Manure-Based Biomass with Coals in a Small Scale Boiler Burner Facility for NOx

and Hg Reductions, Hyukjin Oh (Research Institute of Industrial Science & Technology, Pohang, Korea

(Republic)), Kalyan Annamalai (Texas A&M University, College Station, TX, United States), John

Sweeten (Texas A&M University, Amarillo, TX, United States)

AJTEC2011-44522

The Characteristics of Recycled-NO Reduction in O2/CO2 Coal Combustion, Takashi Marumo, Jun-ichiro

Yamamoto, Hirotatsu Watanabe, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44279

NO Reduction Mechanism Peculiar to O2/CO2 Coal Combustion Characterized by High CO2

Concentration, Hirotatsu Watanabe, Takashi Marumo, Jun-ichiro Yamamoto, Ken Okazaki (Tokyo



2-2-6 Heat and Mass Transfer in Combustion Systems VI - Biomass and Waste Combustion -

Session Organizer: Kaoru Maruta (Tohoku University, Sendai, Japan)

Session Co-Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)

AJTEC2011-44145

Combustion of Bio-Coke (Highly Densified Biomass Fuel) Block in High-Temperature Air Flow,

Hiroyuki Ito, Yuto Sakai (Hokkaido University, Sapporo, Japan), Tamio Ida (Kinki University,

Higashi-Osaka, Japan), Yuji Nakamura, Osamu Fujita (Hokkaido University, Sapporo, Hokkaido, Japan)

AJTEC2011-44436

Effects of Heterogeneous Reaction and Slow/Rapid Volatilization Process on N2O Formation During the

Combustion of Pulverized Biomass, Yukihiko Okumura (Maizuru National College of Technology,

Maizuru, Kyoto, Japan), Hirotatsu Watanabe, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)

31

AJTEC2011-44159

Decomposition of Toluene as a Biomass Tar Through Partial Combustion, Noriaki Nakatsuka, Yasushi

Imoto, Jun Hayashi (Osaka University, Suita, Osaka, Japan) Miki Taniguchi, Kenichi Sasauchi

(Chugai-Ro, Osaka, Japan), Mayumi Matsuda (J-Science Lab, Kyoto, Japan), Fumiteru Akamatsu (Osaka

University, Suita, Osaka, Japan)

AJTEC2011-44242

Numerical Optimization of Waste to Energy Plant at Different Operating Conditions, Niko Samec, Miran

Kapitler, Filip Kokalj (University of Maribor, Faculty of Mechanical Engineering, Maribor, Slovenia)

Room: Milo III 10:40-12:00 Tuesday, March 15

2-4-5 Heat and Mass Transfer in Energy Devices V - Solar Energy 1 (Photovoltaic Cells) -

Session Organizer: Kohei Ito (Kyushu University, Fukuoka, Japan)


AJTEC2011-44513

Photovoltaic Generation of Electricity Using Near-Field Radiation, Katsunori Hanamura, Hirofumi Fukai,

Elaiyaraju Srinivasan, Masao Asano, Teppei Masuhara (Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44132

Band-Gap Tuned Direct Absorption for Hybrid Concentrating Solar Photovoltaic/Thermal System, Todd

Otanicar (Loyola Marymount University, Los Angeles, CA, United States), Ihtesham Chowdhury, Patrick

Phelan, Ravi Prasher (Arizona State University, Tempe, AZ, United States)

AJTEC2011-44580

Design Parameters for High-Efficiency Hybrid PV/Thermal Solar Energy Systems, Hamid Hadim, Jerry

Dutreuil (Stevens Institute of Technology, Hoboken, NJ, United States)

AJTEC2011-44349

Fabrication of a Dye Sensitized Solar Cell and Its Performance Dependence on Temperature and

Irradiance, Edwin Peng, Halil Berberoglu (The University of Texas at Austin, Austin, TX, United States)


2-4-6 Heat and Mass Transfer in Energy Devices VI - Solar Energy 2 (Thermal Utilization & Reactor) -


Session Co-Organizer: Katsunori Hanamura (Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44354

An Exergy-Based Metric for Evaluating Solar Thermal Absorber Technologies for Gas Heating, Maritza

Ruiz, Van Carey (University of California, Berkeley, CA, United States)

AJTEC2011-44328

Simulation on Solar Energy Collection to Power a Thermoacoustic Prime Mover Using Pressurized Hot

Steam, Ikhsan Setiawan, Makoto Nohtomi (Waseda University, Saitama, Japan), Masafumi Katsuta

(Waseda University, Tokyo, Japan)

AJTEC2011-44381

Characterization of Activated Carbon for Carbon Laden Flows in a Solar Reactor, Nesrin Ozalp,

Vidyasagar Shilapuram (Texas A&M University at Qatar, Doha, Qatar)

AJTEC2011-44387

Simulation of Solar Thermochemical Hydrogen Production Techniques, Mohamed Almodaris, Sara

Khorasani, Jocin James Abraham, Nesrin Ozalp (Texas A&M University at Qatar, Doha, Qatar)


2-4-3 Heat and Mass Transfer in Energy Devices III - Energy Storage & Utilization -

Session Organizer: Julie Asfia (Boeing Company, Huntington Beach, CA, United States)

Session Co-Organizer: Kosuke Nishida (Kyoto Institute of Technology, Kyoto, Japan)

AJTEC2011-44146

32

Design Concept and the Performance of a Metal Hydride Hydrogen Storage Tank in Totalized Hydrogen

Energy Utilization System, Tetsuhiko Maeda (National Institute of Advanced Industrial Science and

Technology, Tsukuba, Ibaraki, Japan), Keiichi Nishida, Shiro Yamazaki (Tokyo Institute of Technology,

Yokohama, Japan), Yoshiaki Kawakami, Masao Masuda (Takasago Thermal Engineering Co. Ltd., Atsugi,

Kanagawa, Japan), Manabu Tange (Shibaura Institute of Technology, Tokyo, Japan), Yasuo Hasegawa,

Hiroshi Ito, Akihiro Nakano (National Institute of Advanced Industrial Science and Technology, Tsukuba,

Ibaraki, Japan)

AJTEC2011-44148

The Actual Operation of Multiple Metal Hydride Hydrogen Storage Tanks in Totalized Hydrogen Energy

Utilization System, Yoshiaki Kawakami, Masao Masuda (Takasago Thermal Engineering Co. Ltd., Atsugi,

Kanagawa, Japan), Tetsuhiko Maeda, Akihiro Nakano (National Institute of Advanced Industrial Science

and Technology, Tsukuba, Ibaraki, Japan), Manabu Tange (Shibaura Institute of Technology, Tokyo,

Japan), Atsushi Takahashi (Takasago Thermal Engineering Co. Ltd., Atsugi, Kanagawa, Japan), Masakazu

Shoji, Hideyuki Aoki, Takatoshi Miura (Tohoku University, Sendai, Japan)

AJTEC2011-44630

Influence of Surface Emissivity and of Low Emissivity Shields on the Thermal Properties of Low Density

Insulating Materials, Manuela Campanale, Lorenzo Moro (Universita Degli Studi Di Padova, Padova,

Italy), Mariacarla Arduini Schuster (Zae Bayer, Wurzburg, Germany)

AJTEC2011-44592

Heat Transfer Effects on Dynamic Pressure Response of Pneumatic Vacuum Circuit, Zhonghua Guo,

Xiaoning Li (Nanjing University of Science and Technology, Nanjing, China), Toshiharu Kagawa (Tokyo

Institute of Technology, Yokohama, Japan)





Room: Kona Moku A 10:40-12:00 Tuesday, March 15

3-2-4 Phase Transition and Fluid Structure in Nanoscale Energy Systems

Session Organizer: Yoav Peles (R.P.I, Troy, NY, United States)

Session Co-Organizer: Takashi Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Japan)

AJTEC2011-44407

Molecular Dynamics Simulation of Three-Dimensional Heterogeneous Nucleation, Donguk Suh, Kenji

Yasuoka (Keio University, Yokohama, Japan)

AJTEC2011-44457

Multicanonical Molecular Dynamics Simulation Study of the Liquid-Solid and Solid-Solid Transitions in

Lennard-Jonse Clusters, Toshihiro Kaneko, Kenji Yasuoka, Ayori Mitsutake (Keio University, Yokohama,

Japan), Xiao Cheng Zeng (University of Nebraska - Lincoln, Lincoln, NE, United States)

AJTEC2011-44602

Cutoff Radius Effect of Water Configuration Using the Wolf Method, Kazuaki Takahashi (Keio University,

Yokohama, Japan), Tetsu Narumi (University of Electro-Communications, Tokyo, Japan), Kenji Yasuoka

(Keio University, Yokohama, Kanagawa, Japan)

AJTEC2011-44609

Molecular Dynamics Simulation of Quasi-Two-Dimensional Water Network on Ice Nucleation Protein,

Daisuke Murakami, Kenji Yasuoka (Keio University, Yokohama, Japan)


3-2-5 Interfacial Transport Phenomena in Energy Systems

33

Session Organizer: Kenji Yasuoka (Keio University, Yokohama, Japan)

Session Co-Organizer: Patrick Hopkins (Sandia National Labs, Albuquerque, NM, United States)

AJTEC2011-44373

Interfacial Thermal Resistance Between a Carbon Nanoparticle and Molten Salt Eutectic: Effect of

Material Properties, Particle Shapes and Sizes, Byeongnam Jo, Debjyoti Banerjee (Texas A&M University,

College Station, TX, United States)

AJTEC2011-44474

Molecular Analysis on the Dynamic Properties of Water Droplet at Solid-Liquid Interface Based on MD

Simulations, Yasutaka Yamaguchi, Donatas Surblys, Satoshi Nakaoka (Osaka University, Suita, Osaka,

Japan), Koji Kuroda, Tadashi Nakajima, Hideo Fujimura (Dai Nippon Printing Co., Ltd., Tsukuba, Ibaraki,

Japan)

AJTEC2011-44220

Effects of the Nanostructural Geometry at a Liquid-Solid Interface on the Interfacial Thermal Resistance

and the Liquid Molecular Non-Equilibrium Behaviors, Masahiko Shibahara (Osaka University, Osaka,

Japan), Taku Ohara (Tohoku University, Sendai, Miyagi, Japan)


3-2-6 Nanofluids and Nanoparticles in Energy Systems

Session Organizer: Avijit Bhunia (Teledyne Scientific, Thousand Oaks, CA, United States)

Session Co-Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan)

AJTEC2011-44448

Characterization and Convective Heat Transfer with Nanofluids, Yijun Yang, Alp Oztekin (Lehigh

University, Bethlehem, PA, United States), Satish Mohapatra (Dynalene, Inc., Whitehall, PA, United

States), Sudhakar Neti (Lehigh University, Bethlehem, PA, United States)

AJTEC2011-44453

Effect of Nano-Cluster Compactness on Thermal Physical Properties of Nanofluids, Zhaozan Feng, Wei Li,

Tingting Wu (Zhejiang University, Hangzhou, China)

AJTEC2011-44124

Nanofluid Extinction Coefficients for Photothermal Energy Conversion, Robert Taylor, Patrick Phelan,

Ronald Adrian, Ravi Prasher (Arizona State University, Tempe, AZ, United States), Todd Otanicar

(Loyola Marymount University, Los Angeles, CA, United States)

AJTEC2011-44170

Enhancing the Heat Transfer in Energy Systems From a Volumetric Approach, Todd Otanicar (Loyola

Marymount University, Los Angeles, CA, United States)


3-1-6 Design and Control of Thermal Transport

Session Organizer: Vikas Tomar (Purdue University, West Lafayette, IN, United States)

Session Co-Organizer: Yasutaka Yamaguchi (Osaka University, Suita, Osaka, Japan)

AJTEC2011-44071

Defect-Induced Thermal Rectification: Numerical Study on Carbon Nanotube and FPU-beta Lattice,

Hiroyuki Hayashi, Koji Takahashi (Kyushu University, Fukuoka, Japan)

AJTEC2011-44136

Tunable Thermal Conductivity of TiO2 Films of Close-Packed Nanoparticles, Patrick Hopkins (Sandia

National Laboratories, Albuquerque, NM, United States), Manish Mittal (University of Delaware, Newark,

DE, United States), Leslie Phinney, Anne M. Grillet (Sandia National Laboratories, Albuquerque, NM,

United States), Eric M. Furst (University of Delaware, Newark, DE, United States)

AJTEC2011-44521

Thermal Rectification in Graphene and Carbon Nanotube Systems Using Molecular Dynamics

Simulations, Ajit Vallabhaneni, Jiuning Hu, Yong P Chen, Xiulin Ruan (Purdue University, Lafayette, IN,

United States)

34

Room: Milo IV&V 10:40-12:00 Tuesday, March 15

3-3-4 Interfacial Phenomena and Thermal Properties - 1

Session Organizer: Ingrid Cotoros (Lockheed Martin, Advanced Technology Center, Palo Alto, CA, United States)

Session Co-Organizer: Gota Kikugawa (Tohoku University, Sendai, Japan)

AJTEC2011-44496

Sensing Changes of Surface Properties of Oxygen Nano-Bubbles in Water by the Ripplon Surface

Laser-Light Scattering, Yuma Ichikawa, Yu Nishimura, Yuji Nagasaka (Keio University, Yokohama,

Japan)

AJTEC2011-44070

Micro-Patterned Substrates with Nano-Scale Elements for Pool Boiling, Chad Hunter (Air Force

Research Laboratory, Materials and Manufacturing Directorate, WPAFB, OH, United States), Nicholas R.

Glavin (Air Force Research Laboratory, Materials and Manufacturing Directorate, Dayton, OH, United

States), S.A. Putnam, A.N. Khramov (University Technology Corporation, Dayton, OH, United States), C.

Muratore (Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson

AFB, OH, United States), T.S. Fisher (Birck Nanotechnology Center, West Lafayette, IN, United States),

J.G. Jones (Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson

AFB, OH, United States), Calvin Hong Li (Villanova University, Villanova, PA, United States)

AJTEC2011-44447

Molecular Dynamics Simulations and Kaptiza Conductance Prediction of Si/Au Systems Using the New

Full 2 nn Meam Si/Au Cross-Potential, Carolina Abs da Cruz (Centre de Thermique de Lyon CETHIL

UMR5008, Université de Lyon, INSA de Lyon, CNRS,Université Lyon1, Villeurbanne, France), Patrice

Chantrenne (Centre de Thermique de Lyon CETHIL UMR5008, Villeurbanne, France), Xavier Kleber

(CETHIL UMR5008, Université de Lyon, INSA de Lyon, CNRS,Université Lyon1, Villeurbanne, France)

AJTEC2011-44657

Modeling Grain Boundary Scattering and Thermal Conductivity of Polysilicon Using an Effective

Medium Approach, Timothy S. English, Justin L. Smoyer, John C. Duda, Pamela Norris (University of

Virginia, Charlottesville, VA, United States), Thomas E. Beechem, Patrick Hopkins (Sandia National

Laboratories, Albuquerque, NM, United States)


3-3-5 Interfacial Phenomena and Thermal Properties - 2

Session Organizer: Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United States)

Session Co-Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan)

AJTEC2011-44169

Development of a High Performance Thermal Interface Material With Vertically Aligned Graphite

Platelets, Yuan Zhao, Dennis R Strauss, Tony Liao (Teledyne Scientific & Imaging, Thousand Oaks, CA,

United States), Ya-chi Chen, Chung-Lung Chen (Teledyne Scientific, Thousand Oaks, CA, United States)

AJTEC2011-44135

Contributions of Anharmonic Phonon Interactions to Thermal Boundary Conductance, Patrick Hopkins

(Sandia National Laboratories, Albuquerque, NM, United States), John C. Duda, Pamela Norris

(University of Virginia, Charlottesville, VA, United States)

AJTEC2011-44333

Thermal Boundary Conductance Between Thin Metal Films and Graphite Substrates, Justin L. Smoyer

(University of Virginia, Charlottesville, VA, United States), John C. Duda, Pamela Norris, Arthur W.

Lichtenberger (University of Virginia, Charlottesville, VA, United States)


3-3-10 Nanofluids and Microchannels

Session Organizer: Qingjun (Steve) Cai (Teledyne Scientific Company, Thousand Oaks, CA, United States)

35


AJTEC2011-44310

Laminar Mixed Convection Nanofluids Flow in a Elliptic Duct Using Two Phase Approach, Alireza

Akbarinia (Institute for Electromagnetic Theory and Microelectronics, University of Bremen, Bremen,

Germany), Mohammad Shariat (University of Sistan and Baluchestan, Zahedan, Iran), Rainer Laur

(Institute for Electromagnetic Theory and Microelectronics, University of Bremen, Bremen, Germany)

AJTEC2011-44213

The Impact of Converging and Diverging Angle on the X-Shaped Micro-Channels, Tu Shu-Min, Shuichii

Torii (Kumamoto University, Kumamoto, Japan), Yang-Cheng Shih (National Taipei University of

Technology, Taipei, Taiwan)

AJTEC2011-44088

Characterization of Hybrid-Wicked Copper Heat Pipe, Chen Li, Xianming Dai (University of South

Carolina, Columbia, SC, United States), Levey T. Tran (University of Colorado, Boulder, CO, United

States), Fanghao Yang (University of South Carolina, Mechanical Eng., Columbia, SC, United States),

Ronggui Yang, YC Lee (University of Colorado, Boulder, CO, United States), Bo Shi (University of

Nanjing Science and Technology, Nanjing, Jiangsu, China)

36

Wednesday, March 16



Room: Kona Moku 9:00-9:40, Wednesday, March 16

4-1-5 Keynote - 5


AJTEC2011-44611

Significance of Micro-Scall Mass Transport Phenomena on Fuel Cells and CO2 Sequestration, Shuichiro

Hirai, Shohji Tsushima, Suguru Uemura (Tokyo Institute of Technology, Tokyo, Japan)

Room: Kona Moku 9:40-10:20, Wednesday, March 16

4-1-6 Keynote - 6

Session Organizer: Joerg Petrasch (University of Florida, Gainesville, FL, United States)

AJTEC2011-44581

Solar Thermal Fuel Production, Christian Sattler (German Aerospace Center, Cologne, Koln, Germany),

Hans Muller-Steinhagen (Technical University of Dresden, Dresden, Germany), Martin Roeb, Dennis

Thomey, Martina Neises (German Aerospace Center, Cologne, Koln, Germany)




Room: Honolulu 10:40-12:00, Wednesday, March 16

1-4-3 Droplets and Sprays

Session Organizer: Yoshimichi Hagiwara (Kyoto Institute of Technology, Kyoto, Japan)

Session Co-Organizer: Panneer Selvam (University of Arkansas, Fayetteville, AR, United States)

AJTEC2011-44044

Numerical Analysis of Microdroplet Impact and Evaporation on a Solid Surface, Gihun Son (Sogang

University, Seoul, Korea (Republic))

AJTEC2011-44158

Coupling of Hydrodynamics, Vaporization and Reaction with Liquid Spray Injection into a

High-Temperature Gas-Solid Reactor, Dawei Wang, Rajesh Patel, Chao Zhu (New Jersey Institute of

Technology, Newark, NJ, United States), Teh C. Ho (Corporate Strategic Research Laboratories,

Annandale, NJ, United States)

AJTEC2011-44331

Spray Cooling Heat Transfer Enhancement and Degradation Using Fractal-Like Micro-Structured

Surfaces, Alex Tulchinsky, Deborah Pence, James Liburdy (Oregon State University, Corvallis, OR,

United States)


1-4-1 Two-Phase Flow Phenomena in General - 1

37

Session Organizer: John Crepeau (University of Idaho, Moscow, ID, United States)

Session Co-Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)

AJTEC2011-44625

Interaction Between Two Falling Droplets in the Liquid-Liquid Two Phase Flow, Nao Ninomiya, Takeshi

Mori (Utsunomiya University, Utsunomiya, Tochigi, Japan)

AJTEC2011-44406

The Effect of Fine Particles Added into Water on the Motion of Bubbles Rising Helically, Hisato

Minagawa, Takahiro Yasuda (The University of Shiga Prefecture, Hikone, Shiga, Japan)

AJTEC2011-44089

Mass Transfer from a Bubble in a Vertical Pipe, Shogo Hosoda, Ryosuke Sakata, Kosuke Hayashi, Akio

Tomiyama (Kobe University, Kobe, Japan)



Session Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)

Session Co-Organizer: John Crepeau (University of Idaho, Moscow, ID, United States)

AJTEC2011-44546

Characteristics of Air-Oil Slug Flow in Inclined Pipe Using Tomographic Techniques, Lokman

Abdulkareem, B.J. Azzopardi, Sharaf Safa, Valente Hernandez-perez (University of Nottingham,

Nottingham, United Kingdom)

AJTEC2011-44114

A Mechanistic Heat Transfer Correlation for Non-Boiling Two-Phase Flow in Horizontal, Inclined and

Vertical Pipes, Clement C. Tang, Afshin J. Ghajar (Oklahoma State University, Stillwater, OK, United

States)

AJTEC2011-44606

Experimental Investigation of Two-Phase Flow in a Multi-Branch Reduced T-Junction with Co-Current

Stratified Gas-Liquid Flow, Robert Bowden, Ibrahim Hassan (Concordia University, Montreal, QC,

Canada)



Session Organizer: Weilin Qu (University of Hawaii at Manoa, Honolulu, HI, United States)

Session Co-Organizer: Yoshimichi Hagiwara (Kyoto Institute of Technology, Kyoto, Japan)

AJTEC2011-44187

Rewetting Processes During Top/Bottom Re-Flooding of Heated Vertical Surfaces, Muhammad Ilyas,

Masroor Ahmad, Colin Hale, Simon P Walker, Geoffrey F Hewitt (Imperial College London, London,

United Kingdom)

AJTEC2011-44028

Optimization of the Relationship Between the Two-Phase Friction Factor and Reynolds Equivalent

Number Model by Means of Genetic Algorithm, Berna Bolat, Muhammet Balcilar, Ahmet Selim Dalkilic

(Yildiz Technical University, Istanbul, Turkey), Somchai Wongwises (King Mongkut's University of

Technology Thonburi, Bangkok, Thailand)

AJTEC2011-44573

Thermal Fluctuations and Heat Transfer Measurements in a Externally Heated Rotary Cylinder,

Koteswara Rao Sunkara, Fabian Herz, Eckehard Specht (Otto von Guericke University Magdeburg,

Magdeburg, Saxony Anhalt, Germany)

Room: Kou 10:40-12:00, Wednesday, March 16

1-7-1 Heat and Mass Transfer in Micro-Scale Systems - 1

Session Organizer: Debjyoti Banerjee (Texas A&M University, College Station, TX, United States)

38

Session Co-Organizer: Yuji Suzuki (The University of Tokyo, Tokyo, Japan)

AJTEC2011-44356

Liquid Supply and Heat Transfer Performance of Sintered Cu Monolayer Wicks for Phase Change Heat

Transfer Applications, Stephen Sharratt (UCLA - MAE Department, Los Angeles, CA, United States),

Youngsuk Nam (Massachusetts Institute of Technology, Cambridge, MA, United States), Y. Sungtaek Ju

(UCLA - MAE Department, Los Angeles, CA, United States)

AJTEC2011-44056

Charging Station of a Planar Miniature Thermal Ground Plane, Mohammed Ababneh, Frank Gerner,

Doug Hurd (University of Cincinnati, Cincinnati, OH, United States), Peter de Bock, Shakti Chauhan, Tao

Deng (GE Global Research Center, Niskayuna, NY, United States)

AJTEC2011-44654

Development of a Compact Micro Pulsating Heat Pipe, Young Jik Youn, Sung Jin Kim (Korea Advanced

Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic))



Session Organizer: Vinod Narayanan (Oregon State University, Corvallis, OR, United States)

Session Co-Organizer: Yasuo Kawaguchi (Tokyo University of Science, Noda, Japan)

AJTEC2011-44038

A Microstructure Device for Single Phase Surface Cooling, Juergen J. Brandner, Stefan Maikowske,

Natrah Kamaruzaman (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)

AJTEC2011-44113

Analysis of Laminar Slip-Flow Thermal Transport in Microchannels with Transverse Rib and Cavity

Structured Superhydrophobic Walls at Constant Heat Flux, Daniel Maynes, Brent Webb, Vladimir

Soloviev (Brigham Young University, Provo, UT, United States)

AJTEC2011-44631

Fluid Flow Characteristics in Microchannels with Rib-Patterned Surface, Toru Yamada (The University of

Rhode Island, Kingston, RI, United States), Chungpyo Hong (Tokyo Univeristy of Science, Chiba, Japan),

Otto Gregory, Mohammad Faghri (The University of Rhode Island, Kingston, RI, United States)

AJTEC2011-44583

Experimental Study and Numerical Analysis of Water Single-Phase Pressure Drop Across an Array of

Circular Micro-Pin-Fins, Jonathan R. Mita, Weilin Qu, Marcelo H. Kobayashi (University of Hawaii at

Manoa, Honolulu, HI, United States), Frank E. Pfefferkorn (University of Wisconsin-Madison, Wisconsin,

WI, United States)



Session Organizer: Naoki Shikazono (The University of Tokyo, Tokyo, Japan)

Session Co-Organizer: Deborah Pence (Oregon State University, Corvallis, OR, United States)

AJTEC2011-44655

The Effect of Channel Diameter on Heat Transfer Characteristics of Two-Phase Flow in Microchannels,

Kyosung Choo, Daniel Trainer, Sung Jin Kim (Korea Advanced Institute of Science and Technology,

Daejeon, Yuseong-gu, Korea (Republic))

AJTEC2011-44551

Heat Transfer and Pressure Drop During Condensation of R-134a Inside Parallel Microchannels, Gil Goss

Jr., Stefano Frasson Macarini, Júlio César Passos (Federal University of Santa Catarina, Florianópolis,

Brazil)

AJTEC2011-44079

Flow Boiling Heat Transfer of Ternary Mixture in a Micro-Channel, Inmyong Park (Korea Advanced

Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic)), Sehwan In (Samsung

Heavy Industries Co., Ltd., Geoje, Gyeongsangnam Do, Korea (Republic)), Sangkwon Jeong (Korea

39

Advanced Institute of Science and Technology, Daejeon, Yuseong-gu, Korea (Republic))

AJTEC2011-44176

An Experimental Study on Thermal Hydraulic Characteristics of a Steam Condensation Flow in a Circular

Microtube, Koji Iiyama, Akiko Kaneko, Yutaka Abe, Shingo Asaba (University of Tsukuba, Tsukuba,

Japan), Yutaka Suzuki (Welcon, Co. Ltd., Niigata, Japan)



Session Organizer: Nao Ninomiya (Utsunomiya University, Utsunomiya, Japan)

Session Co-Organizer: Chang Oh (Idaho National Laboratory, Idaho Falls, ID, United States)

AJTEC2011-44374

Experimental Study of Thermal Performance of Nanofluids During Flow in Microchannels Using Surface

Temperature-Nano-Sensors, Seokwon Kang, Saeil Jeon, Debjyoti Banerjee (Texas A&M University,

College Station, TX, United States)

AJTEC2011-44353

Constrained Optimization of One-Dimensional Two-Phase Flow in Fractal-Like Branching Microchannel

Heat Sinks, Douglas Heymann, Deborah Pence (Oregon State University, Corvallis, OR, United States)

AJTEC2011-44563

Effect of 1D Cu Nanostructures on Heat Transfer Characteristics of Single Phase Microchannel Heat Sink,

Muhammad Yakut Ali, Fanghao Yang, Ruixian Fang, Chen Li, Jamil Khan (University of South Carolina,

Columbia, SC, United States)

AJTEC2011-44490

Impact of Surface Microstructures on Liquid Micro-Jet Array Impingement Cooling: Comparison

Between Single Phase and Phase Change Heat Transfer, Avijit Bhunia, Ya-chi Chen, Chung-Lung Chen

(Teledyne Scientific Company, Thousand Oaks, CA, United States)

Room: Waikiki 1 10:40-12:00, Wednesday, March 16

1-3-7 Two-Phase Flow and Heat Transfer - 1

Session Organizer: Hideo Yoshida (Kyoto University, Kyoto, Japan)

Session Co-Organizer: Frederick Best (Texas A&M University, College Station, TX, United States)

AJTEC2011-44118

Flow Boiling Characteristics for R1234ze in 1.0 and 2.2 mm Circular Channels, Cristiano B. Tibiriçá,

Gherhardt Ribatski (University of Sao Paulo, São Carlos, Sao Paulo, Brazil), John R. Thome (Ecole

Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland)

AJTEC2011-44026

Convective Boiling Heat Transfer Enhancement by Microgrooves in Plate Evaporator, Hirofumi Arima,

Nobuhiko Matsuo, Keita Shigyou (Saga University, Saga, Japan), Akio Okamoto (Kobe Steel, Ltd., Tokyo,

Japan), Yasuyuki Ikegami (Saga University, Saga, Japan)

AJTEC2011-44289

Study on Flow and Heat Transfer Characteristics of Tetra-n-Butyl Ammonium Bromide Hydrate Slurry,

Hiroyuki Kumano, Tetsuo Hirata, Yuki Kobayashi (Shinshu University, Nagano, Japan), Tomoya Kudoh

(Aishin Seiki Co., LTD., Aichi, Japan)

AJTEC2011-44116

Efficient Heat Transfer by Phase Transition in Microstructured Devices, Stefan Maikowske, Juergen J.

Brandner, Roland Dittmeyer (Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, Germany)


1-3-13 Two-Phase Flow and Heat Transfer - 2

Session Organizer: Tailian Chen (Gonzaga University, Spokane, WA, United States)

Session Co-Organizer: Satoru Momoki (Nagasaki University, Nagasaki, Japan)

40

AJTEC2011-44083

A Study of Critical Heat Flux During Flow Boiling in Microchannel Heat Sinks, Tailian Chen (Gonzaga

University, Spokane, WA, United States), Suresh V. Garimella (Purdue University, West Lafayette, IN,

United States)

AJTEC2011-44292

Flow Instability and Critical Heat Flux for Flow Boiling of Water in a Vertical Annulus at Low Pressure,

Christoph Haas, Leonhard Meyer, Thomas Schulenberg (Karlsruhe Institute of Technology,

Eggenstein-Leopoldshafen, Baden-Württemberg, Germany)

AJTEC2011-44661

Characterization of a Dual Chambered Two Phase Separator, Frederick Best, Cable Kurwitz, Casey Klein

(Texas A&M University, College Station, TX, United States)

AJTEC2011-44514

Experimental and Numerical Study on Growth of Single Vapor Bubble in Upward Flow Through Vertical

Mini-Tube, Hiroshi Iwai, Motohiro Saito, Yuichi Kami, Yasuhiro Niina, Hideo Yoshida (Kyoto University,

Kyoto, Japan)


1-3-14 Evaporation of Liquid Film and Impinging Droplets - 1

Session Organizer: Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Japan)

Session Co-Organizer: Jorge Alvarado (Texas A&M, College Station, TX, United States)

AJTEC2011-44501

Falling Water Film Evaporation on Horizontal Finned Tube Arrays at Low Pressure, Xiao-Yu Wu, Wei Li

(Zhejiang University, Hangzhou, Zhejiang Province, China), Zhong Luo (Wolverine Tube (Shanghai) Co.

Ltd, Shanghai, China)

AJTEC2011-44597

Multi-Nozzle Spray Cooling in a Closed Loop, Quinn Leland (Air Force Research Laboratory, WPAFB,

OH, United States), Lanchao Lin (University of Dayton Research Institute, Dayton, OH, United States)

AJTEC2011-44533

Measurements of Rewetting Temperatures of Hot Dry Surface in Saturated and Subcooled Film Boiling,

Hiroyasu Ohtake, Nozomi Nagashima (Kogakuin University, Tokyo, Japan), Yasuo Koizumi (Shinshu

University, Ueda, Nagano, Japan)

AJTEC2011-44211

Effect of Cooling Water Temperature on Impinging Jet Heat Transfer on Hot Steel Plate, Jungho Lee,

Cheong-Hwan Yu, Kyu Hyung Do (Korea Institute of Machinery and Materials, Deajeon, Korea

(Republic))


1-3-15 Evaporation of Liquid Film and Impinging Droplets - 2


Session Co-Organizer: Joel Plawsky (Rensselaer Polytechnic Institute, Troy, NY, United States)

AJTEC2011-44652

Two-Phase Cooling Characteristics of Mono-Dispersed Droplets Impacted on a Heated Surface, Seyed

Reza Mahmoudi, Kaz Adamiak, Peter Castle (University of Western Ontario, London, ON, Canada)

AJTEC2011-44509

Multiple Droplet Impingements on Nanostructured Surfaces for Enhanced Spray Cooling, Jorge Alvarado

(Texas A&M, College Station, TX, United States), Yen-Po Lin (University of Illinois at Urbana

Champaign, Urbana, IL, United States)

AJTEC2011-44388

Sub-Atmospheric Mini-Jet Impingement Boiling of Water Under Saturated and Subcooled Conditions,

Ruander Cardenas, Preeti Mani, Vinod Narayanan (Oregon State University, Corvallis, OR, United

States)

41

AJTEC2011-44512

Study on Cooling of Hot Water by Air Flow with Evaporation, Yasuo Koizumi, Yutaka Ebihara (Shinshu

University, Ueda, Nagano, Japan), Michio Murase (INSS, Mihama, Fukui, Japan)


1-2-2 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues) - 1

Session Organizer: Masayuki Kaneda (Osaka Prefecture University, Sakai, Osaka, Japan)

AJTEC2011-44100

Quantitative Evaluation of the Thickness of the Free Surface by the Interface-Tracking Method, Y. Saito, K.

Yasumura, Masakazu Shoji (Tohoku University, Sendai, Miyagi, Japan), Yohsuke Matsushita (Kyushu

University, Kasuga, Fukuoka, Japan), Hideyuki Aoki, Takatoshi Miura (Tohoku University, Sendai,

Miyagi, Japan), S. Ogasawara, M. Daikoku (Hachinohe Institute of Technology, Hachinohe, Aomori,

Japan), M. Shirota, T. Inamura (Hirosaki University, Hirosaki, Aomori, Japan)

AJTEC2011-44109

Thermodiffusion in a Binary Fluid Mixture Subject to External Vibrations: Effect of Variable Physical

Properties, Aram Parsa, Ziad Saghir (Ryerson, Toronto, ON, Canada)

AJTEC2011-44138

Simulation of Heat and Mass Transfer Involving Vapour Condensation in the Presence of

Non-Condensable Gases in Plane Channels, Mohammad Saraireh (Victoria University, School of

Engineering and Science, Melbourne, Victoria, Australia), Graham Thorpe (Victoria University, Centre

for Environmental Safety and Risk Engineering, Melbourne, Victoria, Australia), Jun-De Li (Victoria

University, School of Engineering and Science, Melbourne, Victoria, Australia)


1-2-10 Computational Heat and Mass Transfer (Multiphase Flows & Interface Issues) - 2

Session Organizer: Wensheng Lin (Shanghai Jiao Tong University, Shanghai, China)

AJTEC2011-44200

Prediction of Turbulent Convective Heat Transfer to Supercritical CH4/N2 Mixture in a Vertical Circular

Tube, Zhongxuan Du, Wensheng Lin, Anzhong Gu (Shanghai Jiao Tong University, Shanghai, China)

AJTEC2011-44236

Application of Immersed-Boundary Method to Complex Geometry Flows with Heat Transfer, Chao-An

Lin, Chuan-Chieh Liao (National Tsing Hua University, Hsinchu, Taiwan)

AJTEC2011-44268

Surface Vortex Simulation at Selected Water Temperatures, Aljaz Skerlavaj, Andrej Lipej (Turboinatitut

d.d., Ljubljana, Slovenia), Jure Ravnik, Leopold Skerget (University of Maribor, Maribor, Slovenia)

AJTEC2011-44027

Modelling of Combined Heat and Mass Transfer of Water Droplets in Thermal Technology Equipment,

Stasys Sinkunas, Gintautas Miliauskas, Kristina Norvaisiene, Kestutis Sinkunas (Kaunas University of

Technology, Kaunas, Lithuania)


1-2-1 Computational Heat and Mass Transfer (Thermal CFD) - 1

Session Organizer: Tomoya Houra (Nagoya Institute of Technology, Nagoya, Japan)

AJTEC2011-44405

Numerical and Experimental Investigation of Temperature and Flow Fields in a Full Vehicle, Devadatta

Mukutmoni, Jaehoon Han (Exa Corporation, Livonia, MI, United States), Ales Alajbegovic (Exa

Corporation, Ann Arbor, MI, United States)

AJTEC2011-44295

Internal Turbine Blade Cooling Simulation: Advanced Models Assessment on Ribbed Configurations,

Florian Guillou, Francois Chedevergne (ONERA - DEFA, Chatillon Cedex, France)

42

AJTEC2011-44371

Fundamental Study of Turbulence-Radiation Interaction in Turbulent Channel Flow Using Direct

Numerical Simulation, Atsushi Sakurai, Koji Matsubara (Niigata University, Niigata, Japan), Shigenao

Maruyama (Tohoku University, Sendai, Miyagi, Japan)

AJTEC2011-44278

Numerical Simulation for Heat and Fluid Flow Through Porous Media, Masayuki Kaneda, Yusuke

Matsushima, K Suga (Osaka Prefecture University, Sakai, Osaka, Japan)


1-2-9 Computational Heat and Mass Transfer (Thermal CFD) - 2

Session Organizer: Atsushi Sakurai (Niigata University, Niigata, Japan)

AJTEC2011-44121

CFD Modelling with Buoyancy Effects for a Heat and Moisture Transfer Ceiling Panel, Melanie

Fauchoux (University of Saskatchewan, Saskatoon, SK, Canada), Prabal Talukdar (Indian Institute of

Technology, New Delhi, India), Carey Simonson, David Torvi (University of Saskatchewan, Saskatoon,

SK, Canada)

AJTEC2011-44009

CFD Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic

Characteristics in the Rod Bundles with Grid Spacer, C.C. Liu, Yuh-Ming Ferng, C. K. Shih, Bau-Shei Pei

(National Tsing Hua University, Hsinchu, Taiwan)

AJTEC2011-44431

A CFD Analysis of Transverse Airflow Around the Exterior of an Aircraft Fuselage Inside a Large

Enclosure, Yaamunan Venkatesan, Rohitha Paruchuri, T. S. Ravigururajan (Wichita State University,

Wichita, KS, United States)


1-1-3 Single Phase Convection - 1

Session Organizer: Masaaki Motozawa (Tokyo University of Science, Noda, Japan)

Session Co-Organizer: Yaroslav Chudnovsky (Gas Technology Institute, Des Plaines, IL, United States)

AJTEC2011-44007

Heat Transfer and Fluid Flow Characteristics Over Streamlined Symmetrical Body Positioned at

Unfavorable Angles to the Flow, M.Bassam Nabhan (University of Bahrain, A’Ali, Central, Bahrain)

AJTEC2011-44067

Transient Heat Transfer from a Horizontal Plate in Forced Flow of Various Gases, Qiusheng Liu (Kobe

University, Kobe, Hyogo, Japan), Makoto Shibahara (Osaka University, Suita, Osaka, Japan), Katsuya

Fukuda (Kobe University, Kobe, Hyogo, Japan)

AJTEC2011-44091

From Chip to Cooling Tower Data Centre Modelling: Influence of Air-Stream Containment on Operating

Efficiency, Thomas J. Breen (Univeristy of Limerick, Limerick, Ireland), Ed J. Walsh, Jeff Punch (Stokes

Institute, University of Limerick, Limerick, Ireland), Amip J. Shah, Cullen E. Bash, Brandon Rubenstein,

Scot Heath, Niru Kumari (Hewlett Packard Company, Palo Alto, CA, United States)

AJTEC2011-44383

Case Study for Energy-Efficiency of Liquid-Cooled Data Centers, Ricardo Rivera-Lopez, Mark Kimber

(University of Pittsburgh, Pittsburgh, PA, United States)



Session Organizer: Kenichiro Takeishi (Osaka University, Osaka, Japan)

AJTEC2011-44377

Proper Orthogonal Decomposition of Husir's Temperature and Velocity Fields, Anthony DiCarlo,

43

Kimberly H. Chung (MITRE Corportation, Bedford, MA, United States)

AJTEC2011-44432

Modeling Airflow Inside an Aircraft Interior with Multiple Inlets and Outlets, Rohitha Paruchuri,

Yaamunan Venkatesan, T. S. Ravigururajan (Wichita State University, Wichita, KS, United States)

AJTEC2011-44259

Testing of Rectangular Channels with Perturbed Entrances for Temperature Difference under Constant

Heat Flux, Tunde Bello-Ochende, Jacek Matyja (University of Pretoria, Preotia, Gauteng, South Africa)

AJTEC2011-44246

Flow Characteristics Over a Backward-Facing Step in a Duct in Low Reynolds Number Range, Nobuyuki

Suyama, Kyoji Inaoka, Mamoru Senda (Doshisha University, Kyotanabe, Kyoto, Japan)



Session Organizer: Kaoru Iwamoto (Tokyo University of Agriculture and Technology, Tokyo, Japan)

AJTEC2011-44530

Channel Flow Along a Wavy Heated Wall, Sergey Barboy, Alex Rashkovan, Gennady Ziskind

(Ben-Gurion University, Beer-Sheva, Israel)

AJTEC2011-44536

Large Eddy Simulation of Film Cooling with Swirling Coolant Flow, Yutaka Oda, Kenichiro Takeishi, Dai

Shimizu (Osaka University, Suita, Osaka, Japan)

AJTEC2011-44541

Film Cooling Effectiveness Distributions on a Flat Plate with a Double Hole Geometry Using PSP, Lesley

Wright, Evan Martin (Baylor University, Waco, TX, United States)

AJTEC2011-44350

Average Nusslet Number Correlations for Pressure and Suction Sides of Squealer Turbine Blade Tip,

Chaouki Ghenai (Florida Atlantic University, Boca Raton, FL, United States)



Session Organizer: Yutaka Oda (Osaka University, Osaka, Japan)

AJTEC2011-44623

Design of Miniature Liquid Cooler for LED, Henrik Soerensen, Soeren N. Bertel (Aalborg University,

Aalborg, Denmark)

AJTEC2011-44626

Scaling Laws for Electrohydrodynamic Air Movers, Nels Jewell-Larsen, Gustavo Joseph, Kenneth Honer

(Tessera, Inc., San Jose, CA, United States)

AJTEC2011-44640

Thermal Dispersion in Metal Foams, Theresa B. Hoberg, Kenshiro Muramatsu, Erica M. Cherry, John K.

Eaton (Stanford University, Stanford, CA, United States)

AJTEC2011-44178

Entropy Generation Rate in Forced Convection Flow about Inclined Surfaces in a Porous Medium,

Bourhan Tashtoush, Bekir S. Yilbas (KFUPM, Dhahran, Dammam, Saudi Arabia)




Room: Kona Moku B 10:40-12:00, Wednesday, March 16

44

2-1-3 Heat and Mass Transfer in Turbulent Combustion III

Session Organizer: Mamoru Tanahashi (Tokyo Institute of Technology, Tokyo, Japan)

Session Co-Organizer: OA Ezekoye (University of Texas, Austin, TX, United States)

AJTEC2011-44473

DNS of Turbulent Premixed Flames and Heat Transfer in a Constant Volume Vessel, Naoya Fukushima,

Akihiko Tsunemi, Masayasu Shimura, Youngsam Shim, Mamoru Tanahashi, Toshio Miyauchi (Tokyo


AJTEC2011-44422

Computational Test Design for High-Speed Liquid Impact and Dispersal, Alex Brown, Kurt E. Metzinger

(Sandia National Labs, Albuquerque, NM, United States)

AJTEC2011-44290

Effects of Diluent Gases on Combustion of Coal Gasification Gas: Comparison Between N2 and CO2

Dilution, Yukihide Nagano, Kunihoro Kado, Tomohiro Takeo, Yukito Miki, Toshiaki Kitagawa (Kyushu


AJTEC2011-44476

DNS on Autoignition and Flame Propagation of Inhomogeneous Methane-Air Mixtures in a Closed Vessel,

Makito Katayama, Naoya Fukushima, Masayasu Shimura, Mamoru Tanahashi, Toshio Miyauchi (Tokyo


Room: Milo III 10:40-12:00, Wednesday, March 16

2-5-1 Heat and Mass Transfer in Air Conditioning and Refrigeration - I

Session Organizer: Shigeru Koyama (Kyushu University, Fukuoka, Japan)

Session Co-Organizer: S.A. Sherif (University of Florida, Gainesville, FL, United States)

AJTEC2011-44215

Influence of Inserting the Heat Pipe into the MH Particle Bed on the Refrigeration Performance, Sangchul

Bae (Waseda University, Honjo, Saitama, Japan), Masafumi Katsuta, Keisuke Ishikawa, Yusuke Haruna,

Eiji Morita (Waseda University, Tokyo, Japan)

AJTEC2011-44019

Analysis of Heat Transfer Characteristics in Liquefaction Processes of CBM with High Nitrogen Content,

Wensheng Lin, Ting Gao, Anzhong Gu (Shanghai Jiao Tong University)

AJTEC2011-44163

Heat-Pump-Based Thermal Storage for Intermittent Electrical and Thermal Sources, Patrick Phelan,

Ronald Calhoun, Steven Trimble, James E Baker, Jon Sherbeck (Arizona State University, Tempe, AZ,

United States)


2-5-2 Heat and Mass Transfer in Air Conditioning and Refrigeration - II

Session Organizer: S.A. Sherif (University of Florida, Gainesville, FL, United States)

Session Co-Organizer: Shigeru Koyama (Kyushu University, Fukuoka, Japan)

AJTEC2011-44393

Feasibility of Vortex Tube Air-Conditioning System, Mohammad Hamdan, Emad Elnajjar, Ahmed

Alawar, Waseem Siddique (United Arab Emirates University, Alain, Abu Dhabi, United Arab Emirates)

AJTEC2011-44482

Air Cleaning Method with Humidity Swing Operation for Reducing Suspended Particulate Matters,

Nagisa Onoda, Osamu Nakabeppu (Meiji University, Kawasaki, Kanagawa, Japan)

AJTEC2011-44591

Water Vapor Adsorption - Desorption Behavior of a Small Piece of Desiccant Rotor in Temperature Swing,

Akio Kodama, Yasuko Washio (Kanazawa University, Kanazawa, Japan), Kumiko Okamoto (Mitsubishi

Plastic, Inc., Yokohama, Japan), Yugo Osaka (Kanazawa University, Kanazawa, Japan)

45


2-3-1 Autoignition and Performance in Engines

Session Organizer: Takemi Chikahisa (Hokkaido University, Sapporo, Hokkaido, Japan)

Session Co-Organizer: Chao Zhang (University of Western Ontario, London, ON, Canada)

AJTEC2011-44282

A Study of HCCI Combustion Characteristics by Using Light Emission and Absorption Spectroscopy,

Akira Iijima, Koji Yoshida, Hideo Shoji (Nihon University, Chiyoda-ku, Tokyo, Japan)

AJTEC2011-44466

Experimental Study on Combustion in Miniature Glow Ignition Engine - Detection of Spontaneous Light

Emission and Pressure -, Daisuke Kuno, Masaaki Motozawa, Yasuo Kawaguchi (Tokyo University of

Science, Noda, Chiba, Japan)

AJTEC2011-44202

A Computational Study on the Effects of Pre-Ignition Processes on Diesel Engine Combustion and

Emissions, Suresh Aggarwal (University of Illinois at Chicago, Chicago, IL, United States), Douglas E.

Longman (Argonne National Laboratory, Argonne, IL, United States)

AJTEC2011-44391

Engine Performance Characteristics Under Controlled Engine Temperature with Variable Operating

Parameters, R. K. Mandloi, A. Rehman (M.A.National Institute of Technology, Bhopal, India)


2-3-2 Engine Combustion Modeling for Control

Session Organizer: Suresh Aggarwal (University of Illinois at Chicago, Chicago, IL, United States)

Session Co-Organizer: Akira Iijima (Nihon University, Chiyoda-ku, Tokyo, Japan)

AJTEC2011-44203

Development of Diesel Engine Emissions Control Models Based on Heat Release Rate Analysis of

Combustion Processes, Dong Wang, Chao Zhang (University of Western Ontario, London, ON, Canada)

AJTEC2011-44459

Study on Simple and High-Speed Diesel Combustion Model for Driving Mode Simulator Available for

Premixed and Diffusion Combustion of Sprays, Takemi Chikahisa, Yutaka Tabe (Hokkaido University,

Sapporo, Hokkaido, Japan), Kazushige Kikuta (Tomakomai National College of Technology, Tomakomai,

Japan), Abu Shadat Muhammad Sayem (Hokkaido University, Sapporo, Hokkaido, Japan)

AJTEC2011-44035

Multidimensional Modeling of Temperature Distribution in Engine Combustion Chamber, Yuanhong Li,

Song-Charng Kong (Iowa State University, Ames, IA, United States)

AJTEC2011-44139

Shear Heating Effects in Modeling High Viscosity Oil Piston Skirts EHL in Idling Speeds Initial Engine

Start Up, Syed Adnan Qasim, M. Afzaal Malik, Mumtaz Ali Khan (National University of Sciences and

Technology, Rawalpindi, Punjab, Pakistan), Riaz Ahmed Mufti (National University of Sciences and

Technology, Islamabad, Punjab, Pakistan)





Room: Kona Moku A 10:40-12:00, Wednesday, March 16

3-2-7 Nanoscale Transport Phenomena during Thermal Conduction - 1


46

Session Co-Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Hiroshima, Japan)

AJTEC2011-44339

First-Principles-Based Interatomic Potential for Si and Its Thermal Conductivity, Keivan Esfarjani, Gang

Chen (Massachusetts Institute of Technology, Cambridge, MA, United States), Asegun Henry (Georgia

Institute of, Atlanta, GA, United States)

AJTEC2011-44107

Thermal Transport in LEDs for Solid State Lighting, Zonghui Su, Jonathan A. Malen, Jacob H. Melby,

Robert F. Davis (Carnegie Mellon University, Pittsburgh, PA, United States)

AJTEC2011-44094

Quasi-Ballistic Heat Transfer from Metal Nanostructures on Sapphire, Austin Minnich, Gang Chen

(Massachusetts Institute of Technology, Cambridge, MA, United States)

Room: Milo IV&V 10:40-12:00, Wednesday, March 16

3-3-6 Thermal Properties and Performance of Nanofluids

Session Organizer: Leslie Phinney (Sandia National Laboratories, Albuquerque, NM, United States)


AJTEC2011-44649

Thermal Conductivity Affected by Temperature and Particle Size in Al2O3-Water Nanofluids, Fei Duan, D.

Kwek, A. Crivoi (School of Mechanical and Aerospace Engineering, Singapore, Singapore)

AJTEC2011-44372

A Simple Analytical Model for Specific Heat of Nanofluid with Tube Shaped and Disc Shaped

Nanoparticles, Seunghwan Jung, Debjyoti Banerjee (Texas A&M University, College Station, TX, United

States)

AJTEC2011-44375

Experimental Investigation of Molten Salt Nanofluid for Solar Thermal Energy Application, Donghyun

Shin, Debjyoti Banerjee (Texas A&M University, College Station, TX, United States)

AJTEC2011-44659

The Effective Thermal Conductivity of Water Based Alumina Nanofluids in the Fully Developed Laminar

Flow in a Circular Tube Under a Constant Wall Heat Flux Condition, Young Su Na, Joon Sik Lee (Seoul

National University, Seoul, Gwanak-gu, Korea (Republic)), Kenneth Kihm (University of Tennessee,

Knoxville, TN, United States)


3-3-7 Thermal Properties of Nanoporous and Nanostructured Materials

Session Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States)

Session Co-Organizer: Takashi Tokumasu (Institute of Fluid Science, Tohoku University, Sendai, Japan)

AJTEC2011-44046

Thermal Conductivity of Sol-Gel Amorphous Mesoporous Silica Thin Films: Molecular Dynamics

Simulations versus Experiments, Thomas Coquil, Laurent Pilon (University of California, Los Angeles,

Los Angeles, CA, United States)

AJTEC2011-44047

Thermal Conductivity of Amorphous and Crystalline Mesoporous Titania Thin Films From 30 to 320 K,

Jin Fang (University of California, Los Angeles, Los Angeles, CA, United States), Christian Reitz,

Torsten Brezesinski (Justus-Liebig-University of Giessen, Giessen, Germany), E. Joseph Nemanick, Sarah

Tolbert, Laurent Pilon (University of California, Los Angeles, Los Angeles, CA, United States)

AJTEC2011-44137

Estimating Density Reduction and Phonon Localization from Optical Thermal Conductivity

Measurements of Porous Silica and Aerogel Thin Films, Patrick Hopkins, Bryan J Kaehr (Sandia National

Labs, Albuquerque, NM, United States), Darren Dunphy (Unversity of New Mexico, Advanced Materials

Lab, Albuquerque, NM, United States), C. Jeffrey Brinker (Sandia National Labs, Albuquerque, NM,

United States)

47

AJTEC2011-44571

In-Plane Thermal Conductivity of PEM Fuel Cell Gas Diffusion Layers, Ehsan Sadeghi, Ned Djilali

(University of Victoria, Victoria, BC, Canada), Majid Bahrami (Simon Fraser University, Surrey, BC,

Canada)


3-3-8 Properties of Micro- and Nanomaterials - 1

Session Organizer: Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)

Session Co-Organizer: Bong Jae Lee (University of Pittsburgh, Pittsburgh, PA, United States)

AJTEC2011-44315

Predicting Phonon Properties from Molecular Dynamics Simulations Using the Spectral Energy Density,

Joseph Turney, John Thomas, Alan McGaughey (Carnegie Mellon University, Pittsburgh, PA, United

States), Cristina H. Amon (University of Toronto, Toronto, ON, Canada)

AJTEC2011-44160

Role of Chemical Ordering on Phononic Transport in Binary Alloys, John C. Duda, Timothy S. English,

Donald A. Jordan, Pamela Norris, William A. Soffa (Department of Mechanical and Aerospace

Engineering, University of Virginia, Charlottesville, VA, United States)

AJTEC2011-44644

Role of Interface Thermal Boundary Resistance, Straining and Morphology in Thermal Conductivity of a

Set of Si-Ge Superlattices and Biomimetic Si-Ge Nanocomposites, Vikas Samvedi, Vikas Tomar (Purdue


AJTEC2011-44548

Thermal Conductivity Augmentation in Polymeric Nanocomposites, Leandro Sphaier, Luiz Carlos Nunes,

João Marciano Reis, Debora C. Moreira (Universidade Federal Fluminense, Niteroi, RJ, Brazil)


3-3-9 Properties of Micro- and Nanomaterials - 2

Session Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan)

Session Co-Organizer: Keunhan (Kay) Park (University of Rhode Island, Kingston, RI, United States)

AJTEC2011-44184

Size-Dependent Model for Thin Film Thermal Conductivity, Alan McGaughey (Carnegie Mellon

University, Pittsburgh, PA, United States), Daniel P. Sellan (University of Toronto, Toronto, ON, Canada),

Eric S. Landry (Lytron, Inc., Woburn, MA, United States), Cristina H. Amon (University of Toronto,

Toronto, ON, Canada)

AJTEC2011-44273

Impact on Thermal Conductivities of Nanostructured Bismuth Telluride Based Thin Films, Saburo Tanaka

(Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan), Masayuki Takashiri (Komatsu Ltd.,

Hiratsuka, Kanagawa, Japan), Koji Miyazaki (Kyushu Institute of Technology, Kitakyushu, Fukuoka,

Japan)

AJTEC2011-44337

Measurements of the Thermal Conductivity of Individual Alfa-Tetragonal Boron Nanoribbons, Juekuan

Yang, Scott Waltermire, Yang Yang, Deyu L (Vanderbilt Unviersity, Nashville, TN, United States), Xiaoxia

Wu, Terry Xu (The University of North Carolina at Charlotte, Charlotte, NC, United States)

48

Thursday, March 17



Room: Kona Moku 9:00-9:40, Thursday, March 17

4-1-8 Keynote - 7

Session Organizer: Kenji Yasuoka (Keio University, Yokohama, Japan)

AJTEC2011-44641

Micro and Extended-Nano Fluidics on Microchip for Chemistry and Bio-Medical Applications, Takehiko

Kitamori (The University of Tokyo, Tokyo, Japan)


4-1-7 AIChE Donald Q. Kern Award Lecture

Session Organizer: Masahiro Kawaji (City College of New York, New York, NY, United States)

AJTEC2011-44663

Nucleate Boiling Enhancements on Porous Graphite and Micro-Porous and Macro-Finned Copper

Surfaces, Mohamed El-Genk (University of New Mexico, Albuquerque, United States)




Room: Honolulu 10:40-12:00, Thursday, March 17

1-9-1 Heat Transfer in Manufacturing - Session 1

Session Organizer: Ben Q. Li (University of Michigan, Dearborn, MI, United States)

Session Co-Organizer: Takushi Saito (Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44068

Scaling Thermocapillary Surface Velcoity in Weld Pool, Peng S. Wei, C. L. Lin (Dept. Mech.&

Electro-Mech. Eng., National Sun Yat-Sen University, Kaohsiung, Taiwan), C. N. Ting (Dragon Steel

Corporation, Taichung Hsien, Taiwan)

AJTEC2011-44017

Precise Control Method of Temperature Rising Speed of Wafer During Rapid Thermal Processing with

Lamp Heaters, Shigeki Hirasawa, Tsuyoshi Kawanami (Kobe University, Kobe, Japan)

AJTEC2011-44018

Experimental Study on Model Predictive Control to Minimize Temperature Change of Vertical Plate with

Varying Heat Generation, Shigeki Hirasawa, Tsuyoshi Kawanami (Kobe University, Kobe, Japan)

AJTEC2011-44384

Heat Transfer Analysis of a Novel Piezoelectric Air Pump, Andrew Eastman, Mark Kimber (University of

Pittsburgh, Pittsburgh, PA, United States), Atsuhiko Hirata, Gaku Kamitani (Murata Manufacturing Co.,

Ltd., Kyoto, Japan)


49


Session Organizer: T. S. Ravigururajan (Wichita State University, Wichita, KS, United States)

Session Co-Organizer: Kazuyoshi Fushinobu (Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44108

Development of Heat Sinks for Air Cooling and Water Cooling Using Lotus-Type Porous Metals, Hideo

Nakajima (Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Japan), Hiroshi

Chiba (Mitsubishi Electric Corp., Amagasaki, Osaka, Japan), Tetsuro Ogushi (Hiroshima International

University, Kure, Japan)

AJTEC2011-44392

Thermal Analysis of Direct Chill Casting, Ashok Kumar Nallathambi, Mohit Tyagi, Eckehard Specht,

Albrecht Bertram (Otto von Guericke University, Magdeburg, Germany)

AJTEC2011-44366

Development of New Heat Exchanger Design, Anthony Couzinet, Daniel Pierrat, Laurent Gros (CETIM,

NANTES, France), Thierry Kunc (Bertin Technologies, Saint Quentin en Yvelines, France), Antoine

Foata (DGA Essais Propulseurs, Orsay, France)



Session Co-Organizer: Shigeki Hirasawa (Kobe University, Kobe, Japan)

AJTEC2011-44455

Formation of Electro-Conductive Part on Polymeric Material Surface by CO2 Laser Irradiation, Takushi

Saito, Tatsuya Kawaguchi, Isao Satoh (Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44456

Laser Direct Joining Between Stainless Steel and Amorphous Polyamide Plastic, Yousuke Kawahito

(Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka, Japan), Koji Nishimoto (Anan

National College of Technology, Anan, Tokushima, Japan), Seiji Katayama (Joining and Welding

Research Institute, Osaka University, Ibaraki, Osaka, Japan)

AJTEC2011-44564

Thermal Effects During Hollow Polymer Fiber Drawing, Ashley Emery, Ann Mescher, Heather Dillon,

Spencer Grange (University of Washington, Seattle, WA, United States)

AJTEC2011-44240

FDTD Analysis of Ultra Short Pulse Laser Propagation in Transient Lens Effect, Munehiro Chijiiwa,

Kazuyoshi Fushinobu, Ken Okazaki (Tokyo Institute of Technology, Tokyo, Japan)

Room: Kou 10:40-12:00, Thursday, March 17


Session Organizer: Hiroyasu Ohtake (Kogakuin University, Tokyo, Japan)

AJTEC2011-44064

Experimental Investigation of a Scaled-Up Passive Interdigital Micromixer with Circular-Sector Mixing

Elements, Kristina J. Cook, YanFeng Fan, Ibrahim Hassan (Concordia University, Montreal, QC,

Canada)

AJTEC2011-44218

Simultaneous Heat Transfer and Pressure Drop Measurements for a Horizontal Micro-Tube, Lap Mou Tam,

Hou Kuan Tam (University of Macau, Macau, China), Afshin J. Ghajar (Oklahoma State University,

Stillwater, OK, United States)

AJTEC2011-44570

Thermal Contact Resistance at Metal Foam-Solid Surface Interface, Ehsan Sadeghi (University of

Victoria, Victoria, BC, Canada), Scott Hsieh (Simon Fraser University, Burnaby, BC, Canada), Majid

Bahrami (Simon Fraser University, Surrey, BC, Canada)

AJTEC2011-44572

Finite Element Analysis of Reaction Front Tracking in Lime Calcination, P Ch Gourisankar Sandaka,

50

Ashok Kumar Nallathambi, Eckehard Specht (Otto Von Guericke University Magdeburg, Magdeburg,

Germany)


1-2-5 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms) - 1

Session Organizer: Kosuke Nishida (Kyoto Institute of Technology, Kyoto, Japan)

AJTEC2011-44291

Thermal Optimization for Internal Embedded Conductive Cooling Schemes Using Topology

Optimization Techniques, Jaco Dirker, Josua P. Meyer (University of Pretoria, Preotia, Gauteng, South

Africa)

AJTEC2011-44082

Scale Effects on Thermal-Fluid Performance of Optimized Hierarchical Structures, Ercan M. Dede, Yan

Liu (Toyota Research Institute of North America, Ann Arbor, MI, United States)

AJTEC2011-44539

Evaluation of Uncertainties of One-Directional Analytical Model for Thermoreflectance Technique,

Changhu Xing, Zilong Hua, Heng Ban (Utah State University, Logan, UT, United States), David Hurley

(Idaho National Laboratory, Idaho Falls, ID, United States), J. Rory Kennedy (DOE Idaho National Lab,

Idaho Falls, ID, United States)

AJTEC2011-44565

Combining Meshless Analysis and Kalman Filters to Estimate Parameters When System Models are

Inaccurate, Ashley Emery (University of Washington, Seattle, WA, United States), Darrell Pepper

(University of Nevada, Las Vegas, Las Vegas, NV, United States)


1-2-12 Computational Heat and Mass Transfer (Numerical Schemes & Algorithms) - 2

Session Organizer: Yutaka Oda (Osaka University, Suita, Osaka, Japan)

AJTEC2011-44275

BEM Based Solution of Turbulent Flow over Periodic Hills with Heat Transfer, Leopold Skerget, Jure

Ravnik (University of Maribor, Maribor, Slovenia)

AJTEC2011-44318

Introduction of Object Oriented FEM Model Developed for Solving Thermal-Hydraulic Processes,

Dalibor Frydrych, MIlan Hokr (Technical University of Liberec, Liberec, Czech Republic)

AJTEC2011-44547

Comparisons Between Integral Transform, Finite Volumes and Combined Solution Strategies for

Convective Heat Transfer Problems, Daniel Chalhub, Leandro Sphaier (Universidade Federal Fluminense,

Niteroi, RJ, Brazil)

Room: Waikiki 1 10:40-12:00, Thursday, March 17

1-3-1 Solid-Liquid Phase Change - 1

Session Organizer: Shuichii Torii (Kumamoto University, Kumamoto, Japan)

Session Co-Organizer: Deyu Li (Vanderbilt University, Nashville, TN, United States)

AJTEC2011-44653

Entropy Generation Analysis for Mono-Dispersed Droplet Cooling at Critical Heat Flux Regime, Seyed

Reza Mahmoudi (Department of Electrical and Computer Engineering, University of Western Ontario,

London, ON, Canada), Kaz Adamiak, Peter Castle (University of Western Ontario, London, ON, Canada)

AJTEC2011-44662

Effects of Surface Treatment on Frost Formation and Defrosting, Kim Kyoungmin, Kwan-Soo Lee

(Hanynag University, Sungdong-gu, Seoul, Korea (Republic))

AJTEC2011-44367

Crystal Orientation Rotation of Ice During Growth in a Bended Capillary, Yoshikazu Teraoka, Ryo Fukuno,

51

Koji Matsumoto (Chuo University, Tokyo, Japan)

AJTEC2011-44031

Numerical Model of Heat Transfer and Mass Transfer During the Solidification of a Concasting Steel,

Josef Stetina, Frantisek Kavicka (Brno University of Technology, Brno, Czech Republic)



Session Organizer: Placidus B. Amama (UDRI/AFRL, Dayton, OH, United States)

Session Co-Organizer: Hiroyuki Kumano (Shinshu University, Nagano, Japan)

AJTEC2011-44099

Numerical Study of the Vertical Solidification Process, Sabrina Nouri (UDTS, Algiers, Algeria),

Mouhamed Benzeghiba (USTHB, Algiers, American Samoa), Ahmed Benzaoui (University of Sciences

and Technology, Algiers, Algeria)

AJTEC2011-44288

Numerical Simulation for Infrared-Assisted Freeze Drying of Solution Products, Chi Sung Song (Korea

Institute of Machinery and Materials, Daejeon, Korea (Republic)), Jin Hyun Nam (Daegu University,

Gyungsan, Korea (Republic)), Charn-Jung Kim (Seoul National University, Seoul, Korea (Republic))

AJTEC2011-44274

Estimation of Cooling Performance of PCM Module by Using CFD Analysis with Enthalpy Porosity

Method, Tomoyuki Hatakeyama, Masaru Ishizuka, Shinji Nakagawa, Sadakazu Takakuwa (Toyama

Prefectural University, Toyama, Japan)

AJTEC2011-44425

Phase Change Material and the Thermoelectric Effect for Solar Energy Harvesting and Storage, Qi Zhang,

Amen Agbossou (University of Savoie, Bourget du Lac, France), Zhihua Feng (University of Science and

Technology of China, Hefei, China), Anne-Cecile Grillet (University of Savoie, Bourget du Lac, France)



Session Organizer: Placidus B. Amama (UDRI/AFRL, Dayton, OH, United States)

Session Co-Organizer: Tomoyuki Hatakeyama (Toyama Prefectural University, Toyama, Japan)

AJTEC2011-44162

Scale Analysis of Convective Melting with Internal Heat Generation, Ali Siahpush (INL, Idaho Falls, ID,

United States), John Crepeau (University of Idaho, Moscow, ID, United States)

AJTEC2011-44165

Experimental Verification of Expedited Freezing of Nanoparticle-Enhanced Phase Change Materials

(NEPCM), Liwu Fan, Jay M. Khodadadi (Auburn University, Auburn, AL, United States)

AJTEC2011-44133

Modified MgH2 and Ca(BH4)2 for High-Capacity Thermal Energy Storage, Placidus B. Amama

(UDRI/AFRL, Dayton, OH, United States), Jonathan E. Spowart (Air Force Research Laboratory,

WPAFB, OH, United States), Andrey Voevodin (AFRL/RXBT, Dayton, OH, United States), Timothy

Fisher (Air Force Research Laboratory, Materials and Manufacturing Directorate, WPAFB, OH, United

States)


1-2-4 Computational Heat and Mass Transfer (Heat Exchangers) - 1

Session Organizer: Takuto Araki (Yokohama National University, Yokohama, Japan)

Session Co-Organizer: Laura Schaefer (University of Pittsburgh, Pittsburgh, PA, United States)

AJTEC2011-44494

A Numerical Investigation of Heat Transfer from Small Horizontal Cylinders at Near-Critical Pressures,

Gopinath Warrier (University of California, Los Angeles, Los Angeles, CA, United States), Yohann

52

Rousselet (INSA Lyon, Lyon, Villeurbanne Cedex, France), Vijay K. Dhir (University of California, Los

Angeles, Los Angeles, CA, United States)

AJTEC2011-44618

Unsteady Conjugate Heat Transfer Analysis of an Air Immersed Solid Particle with Application to an

Innovative Heat Exchanger, Leonardo Nettis, Fabio De Bellis, Luciano A. Catalano (Polytechnic

University of Bari, Bari, Italy), Roberto Verzicco (University of Rome Tor Vergata, Rome, Italy)

AJTEC2011-44443

Heat Transfer Characteristics of Baffled Channel Flow, Changwoo Kang, Kyung-Soo Yang (Inha

University, Incheon, Korea (Republic))


1-2-11 Computational Heat and Mass Transfer (Heat Exchangers) - 2

Session Organizer: Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan)

AJTEC2011-44483

Three-Dimensional Simulations of the Flow Deflection in a Louvered Fin Heat Exchanger with Round

Tubes in a Staggered Arrangement, Henk Huisseune, Christophe T’Joen, Peter De Jaeger, Bernd Ameel,

Michel De Paepe (Ghent University, Gent, Belgium)

AJTEC2011-44285

Geometric Optimization of Multiple-Arrays of Micropin-Fins, Tunde Bello-Ochende, Josua P. Meyer,

Fervent U. Ighalo (University of Pretoria, Preotia, Gauteng, South Africa)

AJTEC2011-44629

A Parametric Study on Fluid Flow and Heat Transfer in a Printed Circuit Heat Exchanger, Sang-Moon Lee,

Kwang-Yong Kim (Inha University, Incheon, Korea (Republic))


1-2-6 Computational Heat and Mass Transfer (High Temperature Issues)

Session Organizer: Naoya Fukushima (Tokyo Institute of Technology, Tokyo, Japan)

Session Co-Organizer: Laura Schaefer (University of Pittsburgh, Pittsburgh, PA, United States)

AJTEC2011-44223

Influence of Flame Front Instability on Flame Propagation Behavior, Kenji Mukaiyama, Kazunori

Kuwana (Yamagata University, Yonezawa, Yamagata, Japan)

AJTEC2011-44234

Numerical Simulations of Heat Fluxes for Atmospheric Re-Entries, Romain Savajano (Ecole

Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland), Daniel F. Potter (University of

Queensland, Brisbanne, Australia), Pénélope Leyland (EPFL Ecole Polytechnique Fédérale de Lausanne,

Lausanne, VD, Switzerland)

AJTEC2011-44417

Study on the Air Ingress Mitigation Methods in the Very High Temperature Gas Cooled Reactor (VHTR),

Chang Oh, Eung Soo Kim (Idaho National Laboratory, Idaho Falls, ID, United States)

AJTEC2011-44233

Thermal Radiative Fluid-Structure Coupling for Atmospheric Entries, Ojas Joshi, Pénélope Leyland

(EPFL Ecole Polytechnique Fédérale de Lausanne, Lausanne, VD, Switzerland)


1-6-1 Biotransport Analysis 1

Session Organizer: Ryo Shirakashi (The University of Tokyo, Tokyo, Japan)

Session Co-Organizer: Kunal Mitra (Florida Tech, Melbourne, FL, United States)

AJTEC2011-44660

Three-Dimensional Numerical Study on Freezing Phase Change Heat Transfer in Biological Tissue

Embedded with Two Cryoprobes, Fang Zhao, Zhenqian Chen, Mingheng Shi (Southeast University,

53

Nanjing, Jiangsu, China)

AJTEC2011-44463

Numerical Study on Microwave Dehydro-Freezing of Fish Tissues, Yuichiro Oku, Hirofumi Tanigawa,

Takaharu Tsuruta (Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japan)

AJTEC2011-44214

Effect of Three-Dimensional Electric Field and Heat Conduction to Electrodes on the Temperature Rise

During Irreversible Electroporation, Seiji Nomura, Kosaku Kurata, Hiroshi Takamatsu (Kyushu



1-6-2 Biotransport Analysis 2 and Medical Applications

Session Organizer: Hiroshi Takamatsu (Kyushu University, Fukuoka, Japan)

Session Co-Organizer: Bumsoo Han (Purdue University, West Lafayette, IN, United States)

AJTEC2011-44486

Time-Resolved Diffuse Optical Tomography of Human Forearm Under Exercise, Yasuomi Endo, Yukari

Tanikawa, Shinpei Okawa, Kazuto Masamoto (The University of Electro-Communications, Tokyo, Japan),

Yoko Hoshi (Tokyo Institute of Psychiatry Tokyo, Japan), Yukio Yamada (The University of

Electro-Communications, Tokyo, Japan), Michio Miyakawa (Niigata University, Niigata, Japan),

Hidetaka Okada (University of Electro-Communications, Tokyo, Japan), Tomohiro Kizuka (University of

Tsukuba, Ibaraki, Japan)

AJTEC2011-44480

Effect of the Arrangement of Optodes for 3D Diffuse Optical Tomography, Kazuhiro Uchida, Shinpei

Okawa, Kazuto Masamoto (University of Electro-Communications, Tokyo, Japan), Yoko Hoshi (Tokyo

Institute of Psychiatry, Tokyo, Japan), Yukio Yamada (The University of Electro-Communications, Tokyo,

Japan)

AJTEC2011-44404

Measurement of Cellular Adhesion Ratios under High Shear Flow on Various Substrates, Ryo Shirakashi,

Kiyoshi Takano, Christophe Provin, Yasuyuki Sakai, Teruo Fujii (The University of Tokyo, Tokyo, Japan)

AJTEC2011-44347

Transient Analysis of Microorganism Temperature and Evaporative Losses in an Algae Biofilm

Photobioreactor, Thomas Murphy, Halil Berberoglu (The University of Texas at Austin, Austin, TX,

United States)


1-6-3 Optical Measurement of Biomaterials

Session Organizer: Ryo Shirakashi (The University of Tokyo, Tokyo, Japan)

Session Co-Organizer: Kunal Mitra (Florida Tech, Melbourne, FL, United States)

AJTEC2011-44475

Measurement of Optical Properties of Human Skin, Kazuhisa Hattori (The University of

Electro-Communications, Tokyo, Japan), Tomohiro Kuwahara (Shiseido Company Ltd., Chuou, Japan),

Masato Ohmi, Masamitsu Haruna (Osaka University, Osaka, Japan), Shinpei Okawa, Kazuto Masamoto,

Yukio Yamada (The University of Electro-Communications, Tokyo, Japan)

AJTEC2011-44471

Influence of Blood Glucose Level on the Scattering Coefficient of the Skin in Near-Infrared Spectroscopy,

Sachiko Kessoku (The University of Electro-Communications, Tokyo, Japan), Katsuhiko Maruo

(Panasonic Electric Works Co. Ltd., Kadoma, Japan), Shinpei Okawa, Kazuto Masamoto, Yukio Yamada

(The University of Electro-Communications, Tokyo, Japan)

AJTEC2011-44458

Measurement of Fluorescence Properties in Light Scattering Medium, Shouji Maruoka, Yohei Mitsui,

Shinpei Okawa (The University of Electro-Communications, Tokyo, Japan), Yoko Hoshi (Tokyo Institute

of Psychiatry, Tokyo, Japan), Yukio Yamada (The University of Electro-Communications, Tokyo, Japan)

54

AJTEC2011-44024

Tissue-Light Interaction During Monitoring of Thermal Lesion using Quantum Dot Mediated

Fluorescence Thermometry, Willard L. Hanson, Najma Abdollahzadeh (University of Texas at Arlington,

Arlington, TX, United States), Bumsoo Han (Purdue University, West Lafayette, IN, United States)




Room: Kona Moku B 10:40-12:00, Thursday, March 17

2-6-1 Heat and Mass Transfer in Reaction Systems I

Session Organizer: Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)

Session Co-Organizer: Kalyan Annamalai (Texas A&M University, College Station, TX, United States)

AJTEC2011-44201

Design and Testing of a High Pressure and Temperature, Optically Accessible, Entrained Flow Coal

Gasifier, Indraneel Sircar, Rohan Gejji, Anup Sane, David Blunck, Scott Meyer, Jay P. Gore (Purdue


AJTEC2011-44073

Determination of Heat of Reaction in Supercritical Water, Yukihiko Matsumura, Go Tsujimoto, Takuro

Konishi (Hiroshima University, Higashi-Hiroshima, Japan)

AJTEC2011-44130

Modeling Compressive Reaction in Shock-Driven Secondary Granular Explosives, Aaron Brundage

(Sandia National Laboratories, Albuquerque, NM, United States)

AJTEC2011-44210

Oxygen Supply to Exothermic Combustion Reactions in Compost Heating System (CHS) by Permanent

Magnets, Harumi Toriyama, Yutaka Asako (Tokyo Metropolitan University, Tokyo, Japan)

Room: Kona Moku B 13:40-15:00, Thursday, March 17

2-6-2 Heat and Mass Transfer in Reaction Systems II

Session Organizer: Kalyan Annamalai (Texas A&M University, College Station, TX, United States)

Session Co-Organizer: Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)

AJTEC2011-44072

Proposal and System Design of Chemical Dehumidification Process, Koichi Shirai (Hiroshima University,

Higashi-Hiroshima, Japan), Hiroyuki Kitahara (Total System Laboratory, Ibaraki, Japan), Yukihiko

Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)

AJTEC2011-44253

A Proposal of Waste Heat Recovery System Through Methanol Steam Reforming Integrated with

Absorption Heat Pump, Shunsuke Kawasaki, Willy Yanto Wijaya, Hirotatsu Watanabe, Ken Okazaki

(Tokyo Institute of Technology, Tokyo, Japan)

AJTEC2011-44664

Detailed Numerical Modeling of a Microchannel Reactor for Methane-Steam Reforming, Kevin Drost,

Benn J. Eilers, Daniel Peterson, Sourabh Apte, Vinod Narayanan, John Schmitt (Oregon State University,

Corvallis, OR, United States)

AJTEC2011-44390

Steam-Methane Reforming in a Microchannel under Constant and Variable Axial Surface Temperature

Profiles, Benn J. Eilers, Vinod Narayanan, Sourabh Apte, John Schmitt (Oregon State University,

Corvallis, OR, United States)

55

Room: Kona Moku C 10:40-12:00, Thursday, March 17

2-2-7 Heat and Mass Transfer in Combustion Systems VII - Soot, Particles and Emissions -

Session Organizer: Kris L Jorgensen (The Babcock & Wilcox Company, Barberton, OH, United States)

Session Co-Organizer: Kazunori Kuwana (Yamagata University, Yonezawa, Yamagata, Japan)

AJTEC2011-44413

Effects of Fuel Species on Soot Formation in Laminar Counterflow - Comparison Between Diesel Fuel

and Palm Methyl Ester as an Alternative Fuel -, Jun Hayashi (Osaka University, Suita, Osaka, Japan),

Nozomu Hashimoto, Hiroyuki Nishida (Central Research Institute of Electric Power Industry, Yokosuka,

Japan), Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)

AJTEC2011-44454

Soot and PAH Formation Characteristics in a Micro Flow Reactor with a Controlled Temperature Profile,

Ryu Tanimoto, Takuya Tezuka, Susumu Hasegawa, Hisashi Nakamura (Institute of Fluid Science, Tohoku

University, Sendai, Japan), Kaoru Maruta (Tohoku University, Sendai, Japan)

AJTEC2011-44615

Low-Emissions Renewable Power Generation using Liquid Biofuels, Leo D. Eskin, Michael S. Klassen,

Richard J. Roby, Richard G. Joklik, Maclain M. Holton (LPP Combustion, LLC, Columbia, MD, United

States)

AJTEC2011-44594

A Study of Fine Particle Spheroidization Process by Elevated-Pressure Pure Oxygen Flame, Shingo Suzuki,

Koji Sasaki, Noriaki Nakatsuka, Jun Hayashi (Osaka University, Suita, Osaka, Japan), Yoshiyuki

Hagiwara, Kimio Iino (Taiyo Nippon Sanso, Hokuto, Yamanashi, Japan), Fumiteru Akamatsu (Osaka

University, Suita, Osaka, Japan)

Room: Kona Moku C 13:40-15:00, Thursday, March 17

2-2-8 Heat and Mass Transfer in Combustion Systems VIII - Measurements and Dynamics in Combustion

Systems -

Session Organizer: Fumiteru Akamatsu (Osaka University, Suita, Osaka, Japan)

Session Co-Organizer: Chenn Zhou (Purdue University Calumet, Hammond, IN, United States)

AJTEC2011-44025

Schmidt-Boelter Heat Flux Gage Sensitivity Coefficients in Radiative and Convective Environments,

James Nakos, Alex Brown (Sandia National Laboratories, Albuquerque, NM, United States)

AJTEC2011-44061

Aerodynamics of Long Aspect Ratio Fibrous Particles under Settling, Guo Qi, Gus Nathan, Richard Kelso

(The University of Adelaide, Adelaide, SA, Australia)

AJTEC2011-44326

Measuring Ignition Temperature and Heat Generation from Ethanol-Water-Oxygen Mixtures on Platinum,

Joshua Gibson, Judi Steciak, Ralph Budwig (University of Idaho - Boise, Boise, ID, United States), Steve

Beyerlein (University of Idaho - Moscow, Moscow, ID, United States)

Room: Milo III 10:40-12:00, Thursday, March 17

2-4-9 Heat and Mass Transfer in Energy Devices IX - Thermal Cycles -


AJTEC2011-44613

Thermo-Fluid Analysis of Prismatic Fuel Blocks using Multi-Dimensional Heat Conduction and

One-Dimensional Fluid Model, Nam-Il Tak, Min-Hwan Kim, Hong-Sik Lim (Korea Atomic Energy

Research Institute, Daejeon, Korea (Republic)), Goon-Cherl Park (Seoul National University, Seoul,

Korea (Republic))

AJTEC2011-44627

CFD Analysis on the Influence of Coolant Distribution Blocks on the Core Hot Spot Temperature in a

Prismatic Very High Temperature Reactor, Min-Hwan Kim, Nam-Il Tak, Jae Man Noh (Korea Atomic

56

Energy Research Institute, Daejeon, Korea (Republic)), Goon-Cherl Park (Seoul National University,

Seoul, Korea (Republic))

AJTEC2011-44052

Investigations on Performance of Stirling Engine Regenerator Matrix, Dadasaheb J. Shendage, Shireesh B.

Kedare, Shridhar L. Bapat (Indian Institute of Technology Bomaby, Mumbai, Maharashtra, India)

AJTEC2011-44503

A Generalized Ecological, Internally Irreversible Carnot Cycle, As an Optimum Compromise Between

Maximum Power and Efficiency for a Given Heat Transfer Inventory, Mohand Ait-Ali (Ecole Nationale

Polytechnique, El Harrach, Algiers, Algeria)


2-4-7 Heat and Mass Transfer in Energy Devices VII - Heat Transfer & Thermal Devices -

Session Organizer: Tetsuhiko Maeda (AIST, Tsukuba, Ibaraki, Japan)


AJTEC2011-44256

Snow-Melting System Around Steel Top of Underground Fire Cistern using Heat Pipe BACH, Niro Nagai,

Kensuke Suzuki (University of Fukui, Fukui, Japan), Yoshikazu Maegawa, Haruki Taniguchi (Hokukon

Co., Ltd., Fukui, Japan)

AJTEC2011-44144

Field Experiment on Top Heat Thermosyphone, Hiro Yoshida, Naoto Hagino, Erkata Yandri (Kanagawa

Institute of Technology, Atsugi, Kanagawa, Japan)

AJTEC2011-44043

A Numerical Algorithm and a Graphical Method to Size a Heat Exchanger, Torsten Berning (Aalborg

University, Aalborg, Denmark)


2-4-8 Heat and Mass Transfer in Energy Devices VIII - Heat & Mass Transfer in Energy Systems -

Session Organizer: Takuto Araki (Yokohama National University, Yokohama, Japan)

Session Co-Organizer: Wojciech Lipinski (University of Minnesota, Minneapolis, MN, United States)

AJTEC2011-44399

New Thermal Management Systems for Data Centers, Mayumi Ouchi, Yoshiyuki Abe (AIST, Tsukuba,

Ibaraki, Japan), Masato Fukagaya (SOHKi Co., Ltd., Nagoya, Japan), Takashi Kitagawa (Kawamura

Electric Inc., Seto, Japan), Haruhiko Ohta, Yasuhisa Shinmoto (Kyushu University, Fukuoka, Japan),

Masahide Sato, Ken-ichi Iimura (Utsunomiya University, Utsunomiya, Japan)

AJTEC2011-44095

Variable Pressure Humidification Dehumidification Desalination System, G. Prakash Narayan, Ronan K.

McGovern, John H. Lienhard V (Massachusetts Institute of Technology, Cambridge, MA, United States),

Syed M. Zubair (King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia)

AJTEC2011-44255

Numerical and Experimental Research in Heat Transfer to Screw Compressor Rotors, Nikola Stosic, Ian K

Smith, Ahmed Kovacevic (City University, London, SEMS, London, United Kingdom)





57

Room: Kona Moku A 10:40-12:00, Thursday, March 17

3-2-8 Nanoscale Transport Phenomena during Thermal Conduction - 2


Session Co-Organizer: Koji Takahashi (Kyushu University, Fukuoka, Japan)

AJTEC2011-44012

Phonon Scattering in Bi2Te3/Sb2Te3 Superlattice, Yaguo Wang, Xianfan Xu (Purdue University, West

Lafayette, IN, United States), Rama Venkatasubramanian (RTI International, Research Triangle Park, NC,

United States)

AJTEC2011-44173

Thermal Conductivity of Carbon Nanotubes with Defects, Haibin Chen, Alan McGaughey (Carnegie

Mellon University, Pittsburgh, PA, United States)

AJTEC2011-44540

Thermal Transport in Few-Quintuple Bi2Te3 Thin Films and Nanoribbons, Bo Qiu, Xiulin Ruan (Purdue



3-2-9 Transport Phenomena in Nanomaterial Synthesis - 1

Session Organizer: Masahiko Shibahara (Osaka University, Osaka, Japan)

Session Co-Organizer: Alexis Abramson (Case Western Reserve University, Cleveland, OH, United States)

AJTEC2011-44193

Possible Growth Region of Single-Walled Carbon Nanotube in CVD Synthsis on the CHO Components

Diagram, Shuhei Inoue, Takashi Tomie, Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima,

Japan), Masamichi Kohno (Kyushu University, Fukuoka, Japan)

AJTEC2011-44414

Carbon Nanotube Synthesis from Size Classified Metal Nano-Particles by a Differential Mobility

Analyzer, Masahiro Tomoda, Teppei Kawahara, Yohei Tasaki, Yasuyuki Takata (Kyushu University,

Fukuoka, Japan), Makoto Hirasawa (National Institute of Advanced Industrial Science and Technology,

Tsukuba, Japan), Takafumi Seto (Kanazawa University, Kanazawa, Japan), Masamichi Kohno (Kyushu


AJTEC2011-44257

Synthesis of Single-Walled Carbon Nanotube Containing Platinum Group Metal, Kyohei Ito, Shuhei Inoue,

Yukihiko Matsumura (Hiroshima University, Higashi-Hiroshima, Japan)


3-2-10 Transport Phenomena in Nanomaterial Synthesis - 2

Session Organizer: Shuhei Inoue (Hiroshima University, Higashi-Hiroshima, Japan)

Session Co-Organizer: Xinwei Wang (Iowa State University, Ames, IA, United States)

AJTEC2011-44543

Effect of the Residence Time in High Temperature Reaction Field on the Fullerene and PAH Formation

Mechanism, Tatsuya Saika, Youhei Sakita, Masahiko Shibahara (Osaka University, Osaka, Japan)

AJTEC2011-44554

Fabrication of Thermoelectric La0.95Sr0.05CoO3 Thin Film and Seebeck Coefficient Measurement, Weihe

Xu, Qi Chen, Hamid Hadim, Yong Shi (Stevens Institute of Technology, Hoboken, NJ, United States)

AJTEC2011-44556

Size Control of Hollow Polylactic Acid Microcapsules and Hollow Polyelectrolyte Microcapsules in

Bubble Template Method, Jay J. Molino (The University of Tokyo, Chiba, Japan), Fumio Takemura

(National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan), Hirofumi

Daiguji (The University of Tokyo, Chiba, Japan)

58

Room: Milo IV&V 10:40-12:00, Thursday, March 17

3-1-7 Bubbles and Liquid-Vapor Interfaces

Session Organizer: Manohar Sohal (Idaho National Laboratory, Idaho Falls, ID, United States)

Session Co-Organizer: Yuji Nagasaka (Keio University, Yokohama, Japan)

AJTEC2011-44397

MD-CFD Hybrid Simulation for Microbubble Dynamics, Ryo Nabika, Mitsuhiro Matsumoto (Kyoto

University, Kyoto, Japan)

AJTEC2011-44435

Initial Stage of Nucleate Boiling at Atomic Scale, Mitsuhiro Matsumoto, Takahiro Yamamoto (Kyoto

University, Kyoto, Japan)

AJTEC2011-44188

Molecular Dynamics Simulation of Vapor Bubble Nucleation in 2D Lennard-Jones Fluid Along

Nanometer-Sized Cavities, Joseph Johnston, III, R. Panneer Selvam (University of Arkansas, Fayetteville,

AR, United States)


3-1-4 Wetting and Drying

Session Organizer: Gota Kikugawa (Tohoku University, Sendai, Japan)

Session Co-Organizer: Manohar Sohal (Idaho National Laboratory, Idaho Falls, ID, United States)

AJTEC2011-44168

Dryout Studies of Carbon Nanotube Bi-Porous Structure, Qingjun (Steve) Cai, Ya-chi Chen, Chung-Lung

Chen (Teledyne Scientific, Thousand Oaks, CA, United States)

AJTEC2011-44650

Fractal Aggregation Simulation in the Nanofluid Drying, Fei Duan, A. Crivoi (School of Mechanical and

Aerospace Engineering, Singapore, Singapore)

AJTEC2011-44358

Thermo-Wetting and Friction Reduction Characterization of Microtextured Superhydrophobic Surfaces,

Tae Jin Kim, Philip Glass, Carlos Hidrovo (The University of Texas at Austin, Austin, TX, United States)


3-1-5 Measurement of Nanoscale Transport Phenomena

Session Organizer: Patrick Hopkins (Sandia National Labs, Albuquerque, NM, United States)

Session Co-Organizer: Yuji Nagasaka (Keio University, Yokohama, Japan)

AJTEC2011-44553

Thermal Conductivity Measurement of Vertically Aligned Single-Walled Carbon Nanotubes Utilizing

Temperature Dependence of Raman Scattering, Kei Ishikawa, Shohei Chiashi, Saifullah Badar, Theerapol

Thurakitseree, Takuma Hori, Rong Xiang, Makoto Watanabe, Jun-ichiro Shiomi, Shigeo Maruyama (The

University of Tokyo, Tokyo, Japan)

AJTEC2011-44110

A Modified 3-Omega Technique to Measure Thermal Conductivity in Liquids, Gases, and Powders, Scott

N. Schiffres, Jonathan A. Malen (Carnegie Mellon University, Pittsburgh, PA, United States)

AJTEC2011-44260

Identification of Nucleobases of Single Stranded DNA by Nanopore Force Resolution at Different Film

Thickness, Tatiana Zolotoukhina, Takeo Fukui (Toyama University, Toyama, Japan)

59

Closing Remarks



60

Committe Meetings

The following committee meetings are scheduled during the conference. All the meeting rooms are located on the

second floor of the Paoakalani Tower.

Sunday, March 13 Group Time Room

ASME 75th Anniversary of HTD 12:00 noon - 2:00 pm Milo I

ASME Executive Committee Closed Session 1:00 - 3:30 pm Milo II

ASME Executive Committee Open Session 3:30 - 5:00 pm Milo II

Monday, March 14 Group Time Room

ASME K-6 Heat Transfer in Energy Systems 5:00 - 7:00 pm Milo II

ASME K-8 Theory and Fundamental Research 3:00 - 5:00 pm Milo I

ASME K-10 Heat Transfer Equipment 3:00 - 5:00 pm Milo II

ASME K-11 Fire and Combustion 5:00 - 7:00 pm Milo Boardroom

ASME K-12 Aerospace Heat Transfer 5:00 - 7:00 pm Milo I

Tuesday, March 15 Group Time Room

ASME 2011 Summer Heat Transfer Conference Planning 3:00 - 5:00 pm Milo I

ASME Journal of Heat Transfer 3:00 - 5:00 pm Milo II

ASME K-3 Honors and Awards 5:00 - 7:00 pm Milo II

ASME K-13 Heat Transfer in Multiphase Systems 5:00 - 7:00 pm Milo I

ASME K-15 Transport Phenomena in Manufacturing and 3:00 - 5:00 pm Milo Boardroom

Materials Processing

ASME K-20 Computational Heat Transfer 5:00 - 7:00 pm Milo Boardroom

Wednesday, March 16 Group Time Room

2015 AJTEC Planning 3:00 - 5:00 pm Milo I

ASME 2011 IMECE Planning 1:00 - 3:00 pm Milo I

ASME K-2 Long Range Directions & Issues in Heat Transfer 1:00 - 3:00 pm Milo II

ASME K-17 Heat and Mass Transfer in Biotechnology 5:00 - 7:00 pm Milo II

ASME K-19 Environmental Heat Transfer 3:00 - 5:00 pm Milo II

ASME K-21 Education 5:00 - 7:00 pm Milo Boardroom

ASME K-22 Visualization of Heat Transfer 5:00 - 7:00 pm Milo I

Thursday, March 17 Group Time Room

JSME TED Committee Meeting (closed) 11:30 am - 1:30 pm Milo II

ASME K-5 Coordinating Committee 1:00 - 2:30 pm Milo I

the 8th asme-jsmebaillis (université de lyon, cnrs, insa-lyon, cethil, umr5008, lyon, france)...

Documents