the basic building block of every good communication

4
SMART METERING FSK MODEMS SERIAL CONNECTIVITY SIGNAL CONVERSION Decode M-Bus metering solutions provide advanced and accurate ways to collect and store meter information from intelligent electricity, water, gas, heat and cooling energy meters. Solution range consists of advanced M-Bus interfacing and networking equipment and M-Bus Master PC software. Decode Embedded Linux DL28 is a high-performance, industrial-grade embedded computer product family for versatile tasks in the field of M2M communication, Automatic Meter Reading, IoT connectivity, automation, control, measurement and monitoring. Decode remote telemetry solutions, based on GSM and wireless licence free low power radio, are used in wide range of industrial applications – from electricity distribution to windmills, from precision farming to coal mines, from weather stations to water pumping stations, from real-time machinery monitoring to surveillance systems. EMBEDDED LINUX REMOTE TELEMETRY The basic building block of every good communication. Decode was founded in 1991, with focus on design and production of industrial communications and telemetry devices. Our goal is to provide reliable and high quality products for industrial automation. Modems are designed for use in SCADA systems mainly based upon power utility communication networks. Depending of modulation standard it can communicate through specialized, private or leased lines, radio links and power lines (PLC). Available as a desktop modem or in two different types of standard 19 inch enclosure. Decode's range of industrial async serial converters and repeaters are ideal for applications that interface HMI, PLCs, SCADA, flow meters, CNC machines and identification card readers. Whether you wish to convert between Ethernet, RS-232, RS-485, RS-422 or USB they offer highest quality developed especially for industrial use. Signal conditioners, process transmitters and isolators help interfacing real world signals and sensors with controllers, RTUs and other instrumentation in industrial environment. They provide robust analog linear signal such as 4 to 20mA or perform digital interfa- cing to RS-485 standard Modbus protocol.

Upload: others

Post on 02-Apr-2022

2 views

Category:

Documents


0 download

TRANSCRIPT

SMART METERING

FSK MODEMS SERIAL CONNECTIVITY SIGNAL CONVERSION

Decode M-Bus metering solutions provide advanced and accurate ways to collect and store meter information from intelligent electricity, water, gas, heat and cooling energy meters. Solution range consists of advanced M-Bus interfacing and networking equipment and M-Bus Master PC software.

Decode Embedded Linux DL28 is a high-performance, industrial-grade embedded computer product family for versatile tasks in the field of M2M communication, Automatic Meter Reading, IoT connectivity, automation, control, measurement and monitoring.

Decode remote telemetry solutions, based on GSM and wireless licence free low power radio, are used in wide range of industrial applications – from electricity distribution to windmills, from precision farming to coal mines, from weather stations to water pumping stations, from real-time machinery monitoring to surveillance systems.

EMBEDDED LINUX REMOTE TELEMETRY

The basic building block of

every good communication.Decode was founded in 1991, with focus on design and production of industrial communications and telemetry devices.

Our goal is to provide reliable and high quality products for industrial automation.

Modems are designed for use in SCADA systems mainly based upon power utility communication networks. Depending of modulation standard it can communicate through specialized, private or leased lines, radio links and power lines (PLC). Available as a desktop modem or in two di�erent types of standard 19 inch enclosure.

Decode's range of industrial async serial converters and repeaters are ideal for applications that interface HMI, PLCs, SCADA, flow meters, CNC machines and identification card readers. Whether you wish to convert between Ethernet, RS-232, RS-485, RS-422 or USB they o�er highest quality developed especially for industrial use.

Signal conditioners, process transmitters and isolators help interfacing real world signals and sensors with controllers, RTUs and other instrumentation in industrial environment. They provide robust analog linear signal such as 4 to 20mA or perform digital interfa-cing to RS-485 standard Modbus protocol.

SCM 31xIsolated industrial pH and redox signal converter to 4-20mA

EMU C3-V3-A3Electricity Measurement Units with RS-485 Modbus

SCM 20xSCM201 for conversion 0-5Aac to 4-20mASCM202 for conversion 0-500Vac to 4-20mA SCM203 galvanic isolation of in&out current loop

EMU V3-for AC voltages measurement3x230V AC

Monitoring current loop without interrupting it

EMU C3-for AC currents measurement 3xCT 5A ACEMU A3-TTT-3x analogue input measurement(TTT designates input type) example: device A3-001 features first two inputs 0/4-20mAwhere the third one features PT100 input)

Short response time

Span and zero adjustment

Galvanic isolation input and output

Power supplied from current loop

High linearity and temperature stability

Converting pH and redox signal to 4-20mA(SCM 311)

Converting conductivity signal to 4-20mA(SCM 312)

Converting DO signal to 4-20mA (SCM 313)

Span and ofset calibrationTemperature compensation

Galvanic input/output isolation

MM20-USBConverter intended for transparent readout and power supply of M-Bus slave devices.

MM20-GSMTransparent and simultaneous readout of M-Bus slave devices and communication with devices on RS-485 line over GSM network.

MM20-24ETransparent conversion of serial and Ethernet interfaces into M-Bus interface.

Readout up to 20 M-Bus slave devices

Short circuit protection of M-Bus line

Galvanic isolation up to 1kV DCConversion of Modbus TCP to Modbus RTUprotocol at RS-485 port

RS-232 interface for local device setupRemote device setup over SMS messagesand telnet sevices

Readout up to 20 M-Bus slave devices

Short circuit protection of M-Bus line

RS-232, RS-485 and Ethernet interface

Ethernet parameters setup through web interfaceGalvanic isolation of Ethernet line

Readout up to 20 M-Bus slave devices

Short circuit protection of M-Bus lineAutomatic set of data rate and format

Galvanic isolation up to 1kV DCPower supplied from USB portPlug & Play installation

Compatiable with Windows and Linux OS

- Innovation and continuous improvement of our products and solutions. - Collaborations with global leaders in technology.- Research of breakthrough technologies with the ultimate goal of providing unique and distinctive products to our customers.

SMART METERING

SIGNAL CONVERSION

EMBEDDED LINUX

PRM4Packet radio modem for ISM 868MHz frequency range

GT900Quad-band GSM/GPRS terminal

GT340Dual-band GSM/GPRS terminal 

GSM KeyGSM relay management device

GT900-110SMS reporter and GPRS router

GT900-343SMS reporter and GPRS router

GT900-686SMS reporter and GPRS router

RF 868 MHz

RPBS 868Radio transfer ofcommand signals

- Meeting our commitment to provide excellence in service.- We take responsibility for all our decisions and actions, based on high standards of our customers.

REMOTE TELEMETRY GSM

Simcom SIM900 module with integrated TCP/IP stack RS232 DCE serial interfaceLED indication for power supply and GSM networkVoice port (3.5mm Headset Jack )SMA 50Ω antenna connector and miniSIM card slotDIN 35mm rail mounting

uBlox SARA-G340 module with integrated TCP/IP stack RS232 DCE serial interfaceLED indication for power supply and GSM networkSMA 50Ω antenna connector and microSIM card slotPower supply from 8 to 30V DC DIN 35mm rail mounting

Management of one relay output with NO contacts with free callUp to 200 GSM numbers that can control relay outputAdjustment through SMS or RS232RS232 DCE serial interfacePower supply range 8 to 30V DCDIN 35mm rail mounting

Wireless transfer up to four commands in unlicenced ISM 868MHz frequency rangeIsolated digital inputs 250Vac, relay outputs 250Vac/6ARange up to 2km with rod antenna and up to 16km with high gain antennaLED indications for power, inputs, outputs, connection and receive levelTest modes for easy diagnosticMounting on 35mm DIN rail

Serial interface RS-232 DCESerial interface RS-422 or RS-485, 2 wire or 4 wireRange up to 2km with rod antenna and up to 16km with high gain antennaLED indications for power supply, receive, transmit and error in channelOptional mounting for 35mm DIN rail

Transferring commands, alarms and data by SMS or GPRS Simcom SIM900D module, mini SIM card slotOne relay output with NO contactsOne optocoupler inputGalvanic isolationLED indication for device stateDIN 35mm rail mounting

Transferring commands, alarms and data by SMS or GPRS Simcom SIM900D module, mini SIM card slotThree relay outputs with NO contactsFour optocoupler inputsThree analog inputsGalvanic isolation of digital inputs and relay outputs LED indication for device stateDIN 35mm rail mounting

Simcom SIM900D module, mini SIM card slotSix relay outputs with NO contactsEight optocoupler inputs Six analog inputsGalvanic isolation of digital inputs and relay outputs DIN 35mm rail mounting

NetX Ethernet to SerialProtocol converter

232/422-485Industrial data converter

Repeater 422-485Communication converter

USB/422-485 ISOIndustrial data converter

USB/RS232 ISOIndustrial data converter

SERIAL CONNECTIVITY

FSK MODEMS

Interconnection of serial RS-232/422/485 and Ethernet networksTransparent conversion of serial protocols in to UDP or TCP/IP packetsModbus/TCP/UDP - RTU/ASCII protocolSerial and IP parameters setup through web interfaceGalvanic isolation of Ethernet lineOptional galvanic isolation of power supply and power over Ethernet (PoE)

Converts RS-422/485 to RS-232 interfaceSupports all data rates and formatsLED indication of Rx/Tx dataRepeater mode, which expands 422-485 line rangeTriple galvanic isolation: RS 232, RS 422-485 and power supplies up to 1.5kV DC

Intended to use for galvanic isolation, range and capacity extension of RS422-485 network Supports several baud rates and formats Triple galvanic isolation up to 1.5kVDC DIN 35mm rail mounting

Converts RS-422/485 to USB interfaceComplies to USB 1.1 and USB 2.0 standardsAutomatic adjustment of data rate and formatGalvanic isolation up to 1.5kV DCPlug & Play installationPower supplied from USB port – no additional supply is required

Converts RS-232 to USB interfaceAutomatic adjustment of data rate and formatGalvanic isolation up to 1.5kV DCPlug & Play installation Power supplied from USB port – no additional supply is requiredCompatible with Windows and Linux Operating Systems

For more information visitour website www.decode.rs