A Revolution in Transport Care — Help Patients ARRIVE WARM

The Belmont® buddy lite™ Fluid Warmer

• Weighs less than 1.7 lbs — including battery pack

• Powerful — warms 3 Liters of fluid from 20˚C to 38˚C in a single battery charge

• Next to the patient — preventing line cooling

• Portable and lightweight — fits in pouch or pocket

• Water resistant — for greater durability

1

2

45

3

• Removable 3.5 oz heater units can be attached to wrist

• Dry, responsive, low maintenance heating

• Built in safety features for air elimination, pressure regulation, and back flow prevention

• Can be used with standard IV tubing

• Small enough to remain in line during transport

Key features of The Belmont® buddy lite™ Fluid Warmer :

1 One way valve prevents back flow from the patient

2 Dual heater plates safely warm fluids to 38˚C right at the entry site

3 Flow control valve prevents air entrainment especially during transport

4 Large venting membrane automatically removes air from crystalloid solutions

5 Pressure regulating valve prevents excess pressure from reaching unit and patientProudly made in the USA

liteliteThe Belmont®

Portable, battery powered

Belmont Instrument Corporation 780 Boston Rd., Billerica, MA 01821 www.belmontinstrument.com

Call 866-663-0212 today for more information or to schedule a demonstration

The Belmont® buddy lite™ is a battery operated, lightweight fluid warmer designed for hospital and field use. And is small enough to remain in line during patient transfer.The unique heater unit is placed next to the infusion site to avoid line cooling. The sophisticated design incorporates several heating and sensing zones which allow efficient, responsive, low maintenance, dry heat.

The buddy lite™ Fluid Warmer is very easy to set up and operate. The many safety features built into the disposable set require virtually no operator involvement.

Compact, lightweight , durable and proven to withstand hazardous environments; the complete system weighs less than 1.7 lbs and fits into a standard 8” x 4” dump sack.

E-mail us at Sales@belmontinstrument.com

Specifications

Weight: Total Weight: 1.7 lb

Dimensions: Battery Housing: 3.29” x 7.6” x 1.68” 8.4 x 19.3 x 4.3 cm Battery: 3.1” x 5.9” x 0.89” 7.9 x 15.0 x 2.3 cm Heater Unit: 1.5” x 5.2” x 0.87” 3.8 x 13.2 x 2.2 cm

Power: Battery Nominal Voltage: 14.4 VDC Electrical Compliance: EN 60601-1, UL60601-1, CAN/CASA C22.2-NO. 601.1-M90 Battery Recharge: Approximately 2.5 hrs.

Environmental: Operating Temperature: 10° to 35°C Relative Humidity: 10% to 80% RH Pressure: 49 to 103 kPa Storage Temperature: -10°C to 40°C Shock and Vibration: ISTA Pre-shipment Test Procedure, Test procedure 1, 1996 Electromagnetic Compatibility: EN 60601-1-2

Operating Parameters: Flow Rate: Input temperature 20°C: Max 80 ml/min Input temperature 10°C: Max 50 ml/min Output Temperature: 38°C +/- 2°C Prime Volume: 4 ml without tubing, 7.5 ml with valves and tubing at the input and output

Alarm Condition: CHECK FOR AIR OVER TEMPERATURE NO HEAT PROBE FAULT

Disposable: Sterile, Non-Pyrogenic Fluid Path, Single-Patient Use Only

Ordering Information: buddy lite™ System: P/N 905-00017 buddy lite™ Sets: P/N 905-00010, NSN 6515-01-5424545

liteliteThe Belmont®