the best solution for all of your exterior trim...

877.895.1212

The Best Solution for All of Your Exterior Trim Applications

FasciaFrieze Boards

SoffitsPanels

Corner BoardsTrim Board & Mouldings Catalog

2 www.plasticlad.com

Remember when you believed your home was your castle?

Now you can believe again!

3877.895.1212

Plasticlad• ® lifetime exterior trim products have the beauty, fit and feel of wood, but without the endless maintenance.

Plasticlad• ® cuts, nails and finishes just like wood but will not warp, rot, split or delaminate.

Plasticlad• ® is resistant to ALL insects, including termites and carpenter ants.

Plasticlad• ® is the modern day coat-of-armor for your home!

4 www.plasticlad.com4 www.plasticlad.com

Nom. Width Actual Dimensions Actual Length3/8” Sheet Stock

4’ 3/8” x 48” 8’, 10’

1/2” Sheet Stock4’ 1/2” x 48” 8’, 10’, 18’

5/8” Trim Boards4” 5/8” x 3-1/2” 18’

6” 5/8” x 5-1/2” 18’

8” 5/8” x 7-1/4” 18’

10” 5/8” x 9-1/4” 18’

12” 5/8” x 11-1/4” 18’

5/8” Sheet Stock4’ 5/8” x 48” 8’, 10’, 18’

3/4” Trim Boards4” 3/4” x 3-1/2” 18’

6” 3/4” x 5-1/2” 18’

8” 3/4” x 7-1/4” 18’

10” 3/4” x 9-1/4” 18’

12” 3/4” x 11-1/4” 18’

3/4” Sheet Stock4’ 3/4” x 48” 8’, 10’, 18’

1” Trim Boards4” 1” x 3-1/2” 18’, 20’

5” 1” x 4-1/2” 18’, 20’

6” 1” x 5-1/2” 18’, 20’

8” 1” x 7-1/4” 18’, 20’

10” 1” x 9-1/4” 18’, 20’

12” 1” x 11-1/4” 18’, 20’

1” Sheet Stock4’ 1” x 48” 8’, 10’, 18’, 20’

Trim Board

3/8” thickness

1/2” thickness

5/8” thickness

3/4” thickness

1” thickness

Trim Board Thicknesses

Reversible! All trim board and millwork available

woodgrain/smooth or smooth/smooth.

5877.895.1212

Description Dimensions Length

Siding OSC Woodgrain

3-1/2” x 3-1/2” 20’


5-1/2” x 5-1/2” 20’

Bead Board Plank 1/2” x 5-1/4” 18’

Bead Board Sheet 1/2” x 48” 8’

Specialty Millwork

Bead board planks are reversible so you can select the finish of your choice.

Woodgrain Beaded

Smooth BeveledWoodgrain Beveled

Smooth Beaded


Frequently Asked QuestionsQ: What is Plasticlad®?

A: Plasticlad® is expanded rigid PVC material that looks, feels, and works like wood. It has a small cell microstructure, with a density similar to white pine, with a unique range of physical properties that make it the next generation of exterior trim products.

Q: Is Plasticlad® better than wood?

A: Yes. It offers an array of weather resistant features not found in any known woods. These include resistance to rot, moisture, mildew, cupping, splitting, warping, or delaminating. Plasticlad® is resistant to ALL insects, including termites and carpenter ants.

Q: Is Plasticlad® better than other PVC exterior trim products?

A: Yes. Its formulation and manufacturing create a uniformity and density that set it apart as the best PVC trim available. There are no core voids, dog boning, or cave in. It has a LIFETIME warranty, the best available!

Q: How do I cut Plasticlad®?

A: Use the same tools you would to cut wood. Circular saws, jig saws, and band saws will work fine. Carbide tipped blades are recommended.

Q: How do I nail Plasticlad®?

A: Just like wood. Hand or power nailing is acceptable. Any weatherproof wire nail suitable for wood will work. The more nails you use, the better it holds.

Description Profile Dimensions Length

Adams Casing 462747 1-1/16” x 3-1/2” 18’

WM376 Casing 462490 11/16” x 2-1/4” 16’

WM376 Stainable Casing

463762 11/16” x 2-1/4” 16’

Casing 462718 1/2” x 3-5/16” 18’

Casing


Brick Mould (Non-bendable)

467137 1-1/4” x 2” 17’

Brick Mould (Bendable)

462448 1-1/4” x 2” 17’

Brick Mould (Bendable)

462451 1-1/4” x 2” 18’

J-Channel Brick Mould

467351 1-1/4” x 3” 17’

Brick Mould 462452 1-1/4” x 3-1/4” 18’

Brick Mould

7877.895.1212 7877.895.1212


WM445 Casing 464451 11/16” x 3-1/4” 18’

WM445 Stainable Casing

464452 11/16” x 3-1/4” 16’

J-Channel Casing

467467 1-1/8” x 4-1/2” 18’

RB3 Casing 462369 1” x 3-1/2” 18’

Backband Casing

462590 1-3/16” x 4-1/2” 18’

Backband 467152 1-11/32” x 1-13/32” 18’

Backband 467709 1-3/16” x 1-3/8” 18’

Casing


Bed Moulding 462598 9/16” x 1-5/8” 16’

Rams Crown Moulding

462593 1-13/32” x 2-1/16” 16’

Crown Moulding



Base Cap 462450 11/16” x 1-1/8” 16’

Quarter Round 462689 11/16” x 11/16” 16’

Cove 462021 3/4” x 3/4” 16’

Drip Cap 462449 11/16” x 1-5/8” 16’

Cap Moulding


Crown Moulding 460163 9/16” x 2-3/4” 16’

Crown Moulding 462435 9/16” x 3-5/8” 16’

Crown Moulding 462592 11/16” x 4-5/8” 16’

Crown Moulding 462728 9/16” x 5-1/2” 16’

Crown 467661 11/16” x 6” 16’

Crown Moulding

9877.895.1212

Frequently Asked Questions Q: Do I have to paint Plasticlad® trim?

A: No. It does not need to be painted to retain its color or resistance to weather.

Q: Can I paint Plasticlad®?

A: Yes. There are certain applications where it is desirable to finish Plasticlad® with a painted surface. It accepts paint better than wood, and lasts for years!

Q: What type of paint can I use?

A: 100% acrylic latex paint. Consult your manufacturer’s recommendations for application and preparation information.

Q: Can I glue Plasticlad®?

A: Yes. It adheres to wood, masonry, and a variety of substrates using standard construction adhesives and to itself and other PVC products using PVC cement.

Q: Is Plasticlad® made from recycled material?

A: No. It is produced from virgin PVC resin and other quality raw materials. It is not a composite and has no post consumer trash in it for uncompromised quality.

Q: What sizes does Plasticlad® come in?

A: Plasticlad® is the most complete product line available with stock sized boards and sheets, and custom widths up to 48” wide available.


Shingle Moulding

462599 11/16” x 1-5/8” 16’

Rake Moulding 467202 1” x 2” 16’

Shingle Moulding



462804 3-1/2” x 3-1/2” 20’


462805 5-1/2” x 5-1/2” 20’

Siding OSC Smooth

467652 3-1/2” x 3-1/2” 20’

Siding OSC Smooth

467653 5-1/2” x 5-1/2” 20’

Siding Accessories

Siding accessories are available in smooth and woodgrain finishes.



Sill 467117 1-1/4” x 4-3/4” 9’

Sill Nose 467118 1-3/8” x 1-5/16” 9’

Sill Nose 462345 1-1/2” x 1-5/8” 16’

Sill Nose with Weatherstrip

465191 1-1/8” x 1-1/8” 16’

Sill Nose 467717 1-3/16” x 2” 16’

Sill Nose 467435 1-3/4” x 2-13/16” 16’

Sill Nose 467640 2-1/4” x 2-3/4” 16’

Window Sill


Louver Sill 462313 1-1/8” x 3-1/4” 17’

Louver Slat 462319 5/8” x 3-1/2” 17’

Louver Moulding

11877.895.1212


Dentil Moulding 462721 5/8” x 1-1/2” 18’

Dentil Moulding 462722 1” x 3-1/2” 18’

Dentil Moulding 462740 1-1/16” x 3-7/16” 18’

Dentil Moulding


Decorative Trim 467712 1-1/2” x 1-7/8” 16’

Decorative Trim 462759 1/2” x 1” 16’

Decorative Trim 462757 1-1/4” x 1-13/16” 16’

Decorative Trim 462756 1” x 1-1/16” 16’

Decorative Trim 462754 15/16” x 1-1/16” 16’

Pediment 467714 2” x 2-7/8” 16’

Decorative Moulding



Beaded Planking White

462352 3/8” x 5-15/32” 18’

Beaded Planking Blue

462352B 3/8” x 5-15/32” 18’

Ceiling/Wall Moulding


Lattice 462661 1/4” x 1-1/2” 16’

Baluster 462371 1-1/4” x 1-1/4” 16’

Stop 462434 5/8” x 1-1/2” 16’

WM623 Base 467526 9/16” x 3-1/4” 16’

Jamb Stock 462460 11/16” x 3-15/16” 16’

Miscellaneous Moulding

Lifetime Material Warranty•

High Energy Efficiency•

Moisture & Termite •Proof Material

Does Not Promote Mold •or Mildew

Ready to Install•

Paintable with Acrylic •Latex Paint

Installs Below Grade or •Direct to Masonry

Superior Nailing & Gluing•

Saves Valuable Time & •Labor!

Plasticlad® Benefits Include...

13877.895.1212

Installation Tips & Techniques

CuttingUse standard woodworking equipment for cutting. If using a power miter saw, a carbide toothed blade is recommended.

NailingInstall Plasticlad® using 6d and 8d galvanized nails and/or recommended adhesives (see chart on this page).

Place nails 12” on center. Nails should be approximately 3⁄4” from each edge. If

nailing product at 40˚F or below, pre-drilling is required. Pneumatic nailing is also recommended.

GluingPlasticlad® strongly recommend gluing all miter joints on PVC or styrene mouldings using a quality instant glue and/or PVC cement. It may seem unconventional, but the benefits out weigh the inconvenience. When assembling splice and return miters try gluing the mouldings together before installation. This will allow you to fit the joints uninhibited, and fasten the trim to the wall as one unit. Fitting these joints on the wall can be difficult and possibly jeopardize the integrity of the miter joint.

Adhesive Selection for Cellular VinylThe following brands have been laboratory tested and approved for use with Plasticlad®; however, individual conditions may vary and these adhesives may not perform under every circumstance. Other brands may also be suitable, but always test before using.

G: Good Bond F: Fair Bond P: Poor Bond

Int/Ext Adhesive Wood Steel Sheetrock Masonry

Dow 100% Silicone® F F G –

Dap 230 Latex® F P G –

Tru Test® (Tru Value®) G P G –

Contech PL-400® F F G –

Better Than Nails® G F G G

Liquid Nails LN-901 G – G G Heavy Duty®

Expansion and Contraction: Plasticlad® exterior PVC products, as manufactured, may expand and contract due to temperature variations. To reduce or eliminate open joints, the preferred method is the use of adhesive commonly called pipe glue or PVC pipe cement. When bonded correctly with this adhesive, the joint becomes an integral part of the system to which it is being applied.

Wainscot (Item #462352)1. Cut pieces to the desired

length.2. Apply construction

adhesive to the back of one piece of wainscot.

3. Starting in a corner of the room and making sure the nailing fin faces away from the corner, press the first piece into place.

4. Nail through the fin into the wall.5. Continue gluing and nailing until you come to the

corner. At this point, it may be necessary to rip the last corner piece so that it will fit.

6. Repeat along each wall.

Ceiling Planking (Item #462352)1. Allow 1/4” on each end for expansion.2. With the nailing fin positioned away from the wall,

face nail the first piece against one side of the ceiling. Nail the nailing fin on the first piece on maximum 16” centers.

3. Insert the next piece into the slot and continue nailing through the fin on maximum 16” centers until ceiling is completely covered.

4. Use PVC cement where plank ends must be butted together.

5. The last piece will probably need its width adjusted. Measure, mark, and rip it to the desired width.

6. Face nail the last piece as close to the wall as possible.

7. Cover edges with crown or trim moulding.CAUTION: Ceiling planking should never be used for load-bearing application. Attic space above porch should be vented.

www.plasticlad.com14

Siding Corners1. Insert nailing fins into corner

trim as shown.2. Cut the trim pieces so that they

touch the soffit on top and extend 1/8” below the sheathing on bottom.

5-1/2” Siding Outside CornerA. Moisture Barrier TapeB. Nail FinC. Siding Corner (Item #467653 or #462805)D. Siding

3. Measure from the corner: 4” for 3-1⁄2” trim and 6” for 5-1⁄2” trim and make several V-marks from top to bottom.

Use these marks to line up the edge of the nailing fin or to strike a chalk line for alignment. 4. While lining up the edge of the nailing fin with the V-marks (or chalk line), apply nails

through the pre-punched holes, 18” (MAX) apart.

5. Apply 4” window and door sealing tape so that it fully covers both nailing fins, from the soffit to the bottom of the sheathing.

PaintingPlasticlad’s factory applied finish requires no painting for protection. Desired custom finishes can be achieved using oil based or latex paints. To maintain warranty for custom colors in darker shades, use of paints with VinylSafe™ Technology from Sherwin Williams is recommended. (Dark colors are considered any color that falls within the lightness (L) value of 56 to 0 noting that 100 is white and 0 is black.)

Plasticlad® Trim Board may be painted to achieve a color other than that supplied. 1. Scuff Sand using 220 grit sandpaper to remove any

foreign matter and to promote adhesion. Clean sanding residue and paint with a latex acrylic paint. For darker colors refer to Sherwin Williams VinylSafe™ Color Technology. Allow to dry per manufacturer’s directions.

2. Apply a second coat (if required to achieve desired color).

Recommended Touch-up Products

• Dap®“AllPurpose”Painter’sPutty®

• MinwaxHighPerformanceWoodFiller®

• Elmer’sFill-N-FinishLightWoodFiller®

• SherwinWilliamsShrinkFreeSpackling®

After installation is complete, caulk and/or putty all gaps and nail holes.

CleaningCleaning Plasticlad® is easy and fast with most major household cleaners. There are many cleaners on the market and the glass cleaners seem to be the best candidate for keeping the finish intact. The cleaning solution should be applied and immediately wiped dry. With any cleaning material, the cleaning solution should not be left to stand on the components for an extended period of time. The following cleaners are recommended:

Windex® 409 Glass and Surface Cleaner®

Spic & Span Cinch® Fantastik All-Purpose®

Glass Plus® Regency® (Glass and Surface)

Clorox Clean-Up® Fantastik Orange Action®

Fantastik Oxy Power Multi-Purpose Cleaner®

What to AvoidHarsh cleaners with glycol ethers or ethanol type solvents and/or isopropyl alcohol soften the coating if left on for several minutes and are not recommended. Examples of theseharmfulcleanersareGoofOff®,Wal-Mart“GreatValue All Purpose Cleaner®” (glycol ether), 409 General Purpose® (2-Butoxyethanol) and Greased Lightning® (glycol ether), citrus cleaners, abrasive cleaners, and solvents such as acetone, paint remover and lacquer.

AB

CD

Installation Tips & Techniques

877.895.1212 15

Ask About These Additional Plasticlad® Catalogs...

Lifetime Material Warranty•High Energy Effi ciency•Moisture & Termite •Proof MaterialDoes Not Promote Mold•or Mildew

Ready to Install•Paintable with Acrylic Latex Paint•Installs Below Grade or Direct to Masonry•Superior Nailing & Gluing•Saves Valuable Time & Labor!•

Plasticlad® Benefi ts Include...

Trim Sells!

3

2

Today’s neighborhood has become more than just houses. It has taken on a personality that welcomes, comforts, adds security,

promotes style and defines good design. Window surrounds transform each and every home into a distinct signature.

These Cellular Vinyl PVC decorative Wintrim™ Window Surrounds add higher energy efficiency and perform 70% better than wood to

provide a higher degree of insulation from winter’s cold and summer’s heat. The technology of the surrounds allows them to

provide maintenance so low it’s a pleasure...

Clients need never worry about Wintrim™ Surrounds since they do not rot, chip, split or peel. And by the way, termites don’t like

the taste of Cellular Vinyl PVC, and mold and mildew can’t grab hold of it.

Trim Sells!

Window Surrounds Add Style & Curb Appeal to Any Neighborhood...� Lifetime Material Warranty

� Ready to Install

• Paintable with Acrylic Latex Paint

� Low Maintenance

� Moisture & Termite Proof Material

� Install Below Grade or Direct to Masonry

� Saves Time & Labor

• Uses Standard Woodworking Equipment

� Does Not Promote Mold or Mildew

� Superior Nailing & Gluing

• No Grain Raise, Pitch Bleed or Knots

• No Splitting or Cracking

� High Energy Efficiency

• 70% Better Insulation than Wood

• 1,600% Better than Aluminum

Trim Sells! ..............................................

.. 2

Smooth J-Channel Window Surround ..............4

Simplicity Window Surround ..........................6

Splendor Window Surround ............................8

Rams Crown Window Surround ......................10

Regency Trim Window Surround ....................12

Colonial Elegance Window Surround ..............14

Pediment Window Surround..........................16

Refined Sophistication Window Surround ......18

Decadence Window Surround ........................20

Fluted Elegance Window Surround ................22

Tuscany Window Surround ...........................24

Raised Rim Window Surround ......................26

Williamsburg Window Surround ....................28

Decorative J-Channel Window Surround ........30

Styles At a Glance ......................................32

Installation Tips and Techniques ..................34

Table of Contents

Smooth Column*

Textured Column*

Raised Panel Column*

Fluted Column*

Columns UnlimitedPlasticlad® offers all the majesty, allure andbenefits of traditional wood columnswithout the two key drawbacks...MAINTENANCE and REPLACEMENT!Made of 100% Cellular Vinyl PVC™,Columns Unlimited by Plasticlad® requireonly minimum maintenance and neverneed replacement. They stand the test oftime in outdoor use while also serving as adesign solution for interior applications.Upkeep will prove to be a thing of the pastand recreation will be the order of the day.Columns Unlimited by Plasticlad® canchange an ordinary house into a gracefulhome. Incorporating yesterday’s beauty intotoday’s performance...

Features & Benefits:• Quick and easy installation• Will not crack, peel or split• Minimum maintenance• Moisture proof

• Termite proof

About Plasticlad®...

Assorted Caps & Bases

Available

* Non load bearing.

Custom Sizes & Styles Available.

Trim Options

WM 75 WM 210 WM 164

333

877.895.1212www.plasticlad.com

Additional catalogs available:WinTrim Professional Window Surround Systems•Columns Unlimited Distinctive Columns•

the best solution for all of your exterior trim...

Documents