the bmr-a series bmr-a specificationscdnedge.vinsolutions.com/.../website_4919/maxon/bmr-a.pdf ·...
TRANSCRIPT
COLUMNLIFT® SERIESThe BMR-A Series
Maxon Lift Corp. 11921 Slauson Ave., Santa Fe Springs, CA 90670 800.227.4116 Fax 888.771.7713, www.maxonlift.com
■ Totally Automatic Hydraulic Locking Mechanism eliminates the need for manual locking thus taking the driver out of the equation
■ Newly designed closer arms automatically secure the platform tightly against the back of the truck
■ Concentric rollers allow 400% more bearing surface on the rollers, reducing wear and extending life
■ Undercarriage Mounted Switch is protected from side impacts
■ Fully Automatic Retention Ramp
■ Corrugated Steel Platform Structure design eliminates the problem of waffling. All platform configurations are available in steel and aluminum
■ BMR-A models come with all-new trailer kits, which separate out the trailer portion from the tractor portion
BMR-A SPECIFICATIONS
16”Floor Level
77”
32” Min. 56” Max.
12”
Lift Dimensions and Mounting Requirements
The New BMR-A from Maxon: So many improvements,the A stands for Advanced
Steel Platform Sizes
Estimated Hours to Install: 8 Steel Platform Sizes w/16” Aluminum Retention Ramp
Model Capacity 60” X 80”36” + 24”
72” X 80”42” + 30”
60” X 80”30”+ 30”
72” X 80”36”+ 36”
84” X 80”42”+ 42”
Bed Height Min - Max 38” to 56” 44” to 56” 32” to 56” 38” to 56” 44” to 56”
BMRA-35 3500 lbs Approx.Wt. 1630 lbs 1725 lbs 1615 lbs 1710 lbs 1825 lbs
BMRA-44 4400 lbs Approx.Wt. 1680 lbs 1795 lbs 1665 lbs 1780 lbs 1875 lbs
BMRA-55 5500 lbs Approx.Wt. 1775 lbs 1895 lbs 1761 lbs 1882 lbs 2150 lbs
BMRA-66 6600 lbs Approx.Wt. 1775 lbs 1895 lbs 1761 lbs 1882 lbs 2150 lbs
Aluminum Platform Sizes
Incl. 12” Fixed Ramp Incl. 16” Aluminum Retention Ramp
Model Capacity 60” X 80”36” + 24”
72” X 80”42” + 30”
60” X 80”30”+ 30”
72” X 80”36”+ 36”
84” X 80”42”+ 42”
Bed Height Min - Max 38” to 56” 44” to 56” 32” to 56” 38” to 56” 44” to 56”
BMRA-35 3500 lbs Approx.Wt. 1175 lbs 1195 lbs 1215 lbs 1235 lbs 1305 lbs
BMRA-44 4400 lbs Approx.Wt. 1225 lbs 1245 lbs 1265 lbs 1305 lbs 1355 lbs
BMRA-55 5500 lbs Approx.Wt. 1320 lbs 1367 lbs 1361 lbs 1407 lbs 1630 lbs
BMRA-66 6600 lbs Approx.Wt. 1320 lbs 1367 lbs 1361 lbs 1407 lbs 1630 lbs
BMR-A_M157_F1.5-CV.indd 1 4/15/2014 2:33:40 PM
COLUMNLIFT® SERIESThe BMR-A Series
Maxon Lift Corp. 11921 Slauson Ave., Santa Fe Springs, CA 90670 800.227.4116 Fax 888.771.7713, www.maxonlift.com
M-157-0314
Face Seal ConnectionsCreate a secure hydraulic system by using O-rings at all contact points, greatly reducing the chance of system leaks.
Potted SwitchesKeep out dirt, oil, grime and moisture. Potted Switches eliminate corrosion and premature switch failure.
Optional Features■ Bolt-On Installation Kit
■ Low Voltage Switch (LVS)■ Extruded Aluminum Platform■ Dual Pump & Motor Assembly■ Streetside Control■ Header Kit
See Price Sheet for Complete List of Options
Distributed by:
Roller DesignThe Quick Release Roller Design allows for easy inspection and replacement of roller assemblies.
Wiring HarnessIncludes over molded electrical connectors that are watertight and eliminate corrosion problems.
MAXPRO® Paint or GALVANIZED Finish This patented, Maxon exclusive paint process has a tough polyurea top coat and an AL rich primer that combat corrosion and keep the liftgate looking like new. For even more corrosion protection, the BMR-A is alsoavailable in a galvanized finish.
Bolt-On Installation SolutionThis solution can save both time and money during installation. Welders are not required to complete the installation if brackets are pre-installed. The bolts keep the gate in position while the mounting brackets support the weight of the load and gate.
BMR-A_M157_F1.5-CV.indd 2 4/15/2014 2:33:42 PM