Built-in Bypass, space and energy savingThe built-in bypass contactor eliminates heat dissipation and energy losses by bridgingout the power devices once the motor is at full speed, this eliminates the need forexternal bypass contactors and allows the use of non ventilated enclosures.

Motor ProtectionDigistart CS provides comprehensive motor protection, such as motor overload, excessstart time and phase loss detection, this removes the need for external motor protectionrelays.

Simple to install, easy to commissionDigistart CS units can be mounted side-by-side with no gap and are DIN rail mountableup to 60A ideal for where multiple soft starters are required (such as in motor controlcentres), they can even be mounted horizontally.

Digistart CS is quick to commission with just seven rotary switches.

The complete, compact motor start solution7.5 to 110kW 200V, 400V, 575V

The Digistart CS is one of the most compact motorsoft start solutions available with many features tosave panel space and reduce installation time, it is anideal solution when space and cost are critical.

Part No. 0777-0001-01

Digistart CS Specifications

SSttaarrtt mmooddeess

Constant current/CurrentlimitCurrent ramp

SSttoopp mmooddeess

Coast to stop

TVR soft stop

PPrrootteeccttiioonnss

Overload

Phase Sequence

Phase Imbalance

Motor Thermistor

Excess Start Time

Shorted SCR

Supply Fault

Bypass Overload

SSuuppppllyy

Mains VoltageCSx4xxxCSx5xxx

200 to 440Vac (+10%/-15%)200 to 575Vac (+10%/-15%)

Control Voltage 110 to 240Vac (+10% / -15%) or 380 to 440Vac(+10% / -15%)

IInnppuuttss

Start Normally Open. 300Vac max

Stop Normally Closed.300Vac max

Motor Termistor

RReellaayy OOuuttppuuttss

Main Contactor Normally Open. 6A,30Vdc resistive/2A,400Vac, AC11

Programmable Relay Normally Open. 6A,30Vdc resistive/2A,400Vac, AC11

EEnnvviirroonnmmeennttaall

RoHS compliant As standard

ProtectionCSxx018 to CSxx085CSxx140 to CSxx200

IP20IP00

Operating temperature -10oC to +40oC. max60oC with derating

Conformal Coating As standard

Fieldbus options

OOrrddeerr ccooddee DDeessccrriippttiioonn

Digistart -Modbus Interface

Modbus RTU Interface

Digistart -Profibus Interface

Profibus Interface

Digistart -DeviceNet Interface

DeviceNet Interface

Digistart -USB Interface

USB Interface

Other options

OOrrddeerr ccooddee DDeessccrriippttiioonn

Digistart CS - Remote Ketpad

IP54 rated, panel mountablekeypad and display for softstarter operation andmonitoring.

Digistart CS -Pump Apps Module

Provides 3 digital inputs thatcan be configured to detectlow pressure, high pressureand low water levels. A PT100input is available formonitoring pumptemperature.

Digistart CS - Finger Guard Kit

Finger guards are available toprovide IP20 protection formodels CS3x140 to CS3x200

Dimensions (mm)

SSiizzee WW HH DD WWeeiigghhtt

1 98 203 168 2.1kg

2 145 215 196 4.1kg

3 202 240 217 6.5kg

Size Model

Nominal Heavy

AC53b 4-6:354 AC53b 4-20:340

kW @ 400V A A

1CS1x018 7 18 17CS1x042 18 42 36CS1x060 30 60 49

Size Model

Nominal Heavy

AC53b 4-6:594 AC53b 4-20:580

kW @ 400V A A

2 CS2x085 45 85 73

3

CS3x140 75 140 120

CS3x170 90 170 142

CS3x200 110 200 165

Ratings are given at 40oC at <1000m

Ratings are detailed using the AC53b utilisation code specified by IEC60947-4-2

Digistart CS -Remote Keypad

Digistart ISThe Digistart IS is an intelligent softstarter offering many advancedfeatures up to 800kW. For moreinformation on theDigistart range referto the main Digistartbrochure

Digistart200V / 400V / 575V / 690V

7.5 to 800kW (18 to 1600A)

Commander SKDoes your application need to runcontinuously at maximum speed? If notenergy savings can realised fromvarying motor speed. Variable speedtechnology is more cost effective andeasier to use than you might think. OurDrive Centre and Reseller network areavailable to discussyour needs

Commander SSKGeneral PPurpose AAC DDrive

100V / 200V / 400V / 575V / 690V0.25 kW to 132kW

18A: AC-53b 4 -6 :354

Start current rating (a)

Start current (multiple of FLC)

Off time (s)

Start time (s)

W

H

DProfibus DeviceNet Pump Apps

Module

www.controltechniques.com