the complete viewer for ms® project...from installing seavus project viewer on your...

Installation Instructions

© Seavus DOOEL 2011

THE COMPLETE VIEWER FOR MS® PROJECT

Contents

Page | 1 ©Seavus DOOEL 2011. All rights reserved.

CONTENTS 1

CHAPTER 1: INSTALLING SEAVUS PROJECT VIEWER 2

INSTALLATION INSTRUCTIONS 2

ACTIVATION INSTRUCTIONS 9

Contents

Chapter 1: Installing Seavus Project Viewer


Installation Instructions

After you have downloaded the setup, start the installation by double-clicking the setup

file in Windows Explorer or use the “Run” command from the Start menu.

Note: Before you start the setup, you should check the section "System Requirements" in

the “User Manual” document for information about the minimal hardware and software

configuration required to run the product.

Note: You should have Administrator privileges during installation of the application.

STEP 1) SETUP INITIALIZATION:

Once the setup is initialized and the initialization dialog appears; the Setup wizard will

automatically continue with the installation.

Note: Click the Cancel button if you wish to exit the installation

STEP 2) SETUP WELCOME:

After the initial preparations for installation; the setup wizard will show you the Welcome

dialogue. You should click the Next button if you want to continue with the Setup, or

Cancel if you want to exit the wizard.

Chapter 1: Installing

Seavus Project Viewer



STEP 3) LICENSE AGREEMENT:

The license agreement shows the End User License Agreement for the product. Please

read it carefully, and click the “I accept the terms” in the license agreement radio button.

Click the Next button if you agree with the License agreement and want to continue with

the Setup; or click the Cancel button if you disagree with the License agreement and want

to exit the installation wizard.



STEP 4) CUSTOMER INFORMATION:

This dialog box collects the information about the user who performs the installation, and

if the install is only for the current user or for all users of the PC.

In case of installing the Standard version, in this dialog the user enters his purchased

License Key information - the Serial Number. You must insert the correct serial number if

you want to continue the Setup, otherwise you will not be allowed to install the product

on your computer / server.



STEP 5) LANGUAGE DIALOG:

This dialog box allows you to select which language Seavus Project Viewer will be installed

on your PC. You may install Seavus Project Viewer in the following languages: English,

German, Spanish, French and Czech.

STEP 6) SETUP OPTIONS:

For Trial versions you can select which shortcuts should be placed for the application and

whether you want to test the Task Update and Google Apps features:



In case of Standard version installation, here you can additionally choose whether you

want to associate all MPP files with Seavus Project Viewer.

The Task Update and Google Apps options are missing here since your License Key

contains information if these options are purchased or not.

STEP 7) SETUP TYPE:

Complete option will install it on the default location with all components.

Selecting the Custom type of installation gives you an opportunity to choose where the

product will be installed and which components will be installed.



STEP 8) READY TO INSTALL THE PROGRAM:

When you finish with all previous settings in the Setup screens, you are only a few steps

from installing Seavus Project Viewer on your computer/server. If the settings are ok, you

can click the Install button to start the installation.

STEP 9) INSTALLING THE PROGRAM:

After you have clicked the Install button, the installation of the product will start. Once the

installation dialog appears; you have the option to stop the installation by clicking the



Cancel button. Cancelling the installation process will rollback the installation and remove

all the data related to this product.

STEP 10) SETUP COMPLETED:

If the installation was successful; the Installation Completed dialog box will appear, telling

you that the product is successfully installed on your computer/server. Click the Finish

button, the complete the installation process.



Activation Instructions

When Seavus Project Viewer Standard Edition is installed on your computer, you must

activate it in order to be able to use it. The application can be used up to 7 days without

activation, but after the seventh day it must be activated, or you will not be able to use it

any more. If it is activated once, the product does not require activation any more.

Note: Trial setups are different from the Standard. They do not require any activation.

Note: The Trial version cannot be activated with Standard Key. If you have had a Trial

version, you must uninstall it first, then download the Standard setup and install that one.

Note: In order to be able to activate Seavus Project Viewer, you must be logged on as user

with Administrator privileges on your computer.

The activation can be performed on following ways:

Using your Internet connection – Seavus Project Viewer is contacting our secure

Activation Centre using https protocol and receives the activation key.

Contacting our Customer Service representatives via telephone ( +389 2 30-94-061

and +46 40 578 883 for Europe and 1 888 573 2887 for Americas), or via email

([email protected])

If you decide to use the activation by contacting our Customer Service representatives, a

dialog that shows License ID and Hardware ID will appear. You should read these two IDs

to our customer service representative if you are using a telephone for communication, or

to send these IDs over the email to the email address stated above. You will get back the

confirmation ID from our customer service representative, immediately if you are using

telephone or for maximum one working day if you are using email communication. The

confirmation ID must be inserted into fields marked with A, B, C, D, E, F, G and H, and then

you should press Next button to finalize the activation. If the confirmation ID is inserted

correctly the product will be ready for use, but if the confirmation ID is not correct you will

get a message that will tell you that the activation is unsuccessful.

Note: You should write down your License ID and store it in a safe place. The License ID

will be the only identification that you are authorized user of the Seavus Project Viewer

product.

mailto:%[email protected]


Note: If you reinstall the operating system on your computer or change the computer

components, or the entire computer, which will require a new installation of the product,

you must reactivate the Seavus Project Viewer application. This means that you must

contact our Customer Service representatives on the contact phone provided above and

explain the reason for reinstallation of the viewer. After that you will get a new the

confirmation ID which will activate your version of Seavus Project Viewer. But, if you only

reinstall Seavus Project Viewer, no reactivation is required.

Seavus DOOEL 11 Oktomvri 33A

1000 Skopje, Macedonia Phone: + 389 2 3097 400 Fax: + 389 2 3097 414

Email: [email protected] URL: www.seavusprojectviewer.com

All documents prepared or furnished by Seavus DOOEL and the copyright therein shall remain the property of Seavus DOOEL.

Photo: Foto Spring

Seavus Project Viewer is a trademark of Seavus DOOEL.

mailto:[email protected]

http://www.seavusprojectviewer.com/

the complete viewer for ms® project...from installing seavus project viewer on your...

Documents