the electronics kit tee2o1 mr. payne’s period 5 room s111

Click here to load reader

Post on 24-Dec-2015

227 views

Category:

Documents

5 download

Embed Size (px)

TRANSCRIPT

  • Slide 1
  • The Electronics Kit TEE2O1 Mr. Paynes Period 5 Room S111
  • Slide 2
  • Contents of the Kit This is the Kit ! Each group will be responsible for maintaining the contents of 1 kit.
  • Slide 3
  • The Electronics Kit Identify the Parts in Each Bag You should be able to identify the contents of each bag. Make sure each bag is kept separate from other bags. Note the unbagged: Parallel Port Wire 1m Wire strippers/cutters 1 Pliers 1 Wire - 5 colours hookup wire 25'
  • Slide 4
  • Bag One Resistors, LEDs, Transistors and Capacitors 110 ohm resistors 2 220 ohm resistors 16 1K ohm resistors 4 2K ohm resistors 1 LEDs (red) 16 LEDs (green) 2 LEDs (yellow) 2 1N4001 (transistor) 6 2.2uF capacitor 1
  • Slide 5
  • Bag Two Motors and 25 pin parallel port connector kit. PN2222A 4 PN2907 4 1V-12V DC motor 1 stepper motor 1 DB25 Plastic Hood 1 DB25 D-sub connector - crimping style 1
  • Slide 6
  • Bag Three More Resistors 10K ohm resistor 8 51K ohm resistor 1 100K ohm resistor 1 510K ohm resistor 1 1.5M ohm resistor 1
  • Slide 7
  • Bag Four Wire for 25 pin connector Male crimp pins 16 Wire - 5 colours hookup wire 25 inches Parallel Port Wire 1m
  • Slide 8
  • Bag Five Buttons and Integrated Circuits 74LS194 - 4-bit Bi- directional shift register 1 74LS154 - 4 to 16 de- Multiplexer 1 Push button 8
  • Slide 9
  • Bag Six 8 Segment Display and Integrated Circuits 74LS245 - Transciever 1 74LS259 - 8 bit addressable latch 2 555 - Timer 1
  • Slide 10
  • Bag Six More Integrated Circuits 74LS00 - NAND 1 74LS02 - NOR 1 74LS04 - Inverter 1 74LS08 - AND 1 74LS32 - OR 1 74LS47 - 7- Segment decoder/driver 1 74LS74 - Dual D flip- flop 1 74LS86 - XOR 1
  • Slide 11
  • The Big Cahuna The Power Board and Switches and Input / Output Lights The electronic experimenter box is where you provide power and ground to your circuits.
  • Slide 12
  • How It Works See the upcoming Powerpoints on Labs 4.2.1 and 4.2.2
  • Slide 13
  • How It Works
  • Slide 14
  • Next Steps Be sure that you know where all parts belong before you use them to make circuits. Remember to replenish your kit for the next class! A full parts list for the kit is available at http://www.classictechnology.ca/