the expert high-speed and multi-axis solution...multi-threaded leads and links, uphill corner fi...

2
For more information visit www.autodesk.com/MAKE Introducing PowerMill 2020, our expert CAM software just got a whole lot faster PowerMill 2020 offers significantly faster toolpath calculation, quicker simulation and verification, multi-threaded leads and links, uphill corner finishing, a new model filleting option and more. What’s new The expert high-speed and multi-axis solution Visit www.powermill.com to find out more Faster leads and links PowerMill makes better use of multi-threads (cores) to calculate leads and links up to 60% faster than PowerMill 2019. This reduces programming times whilst giving CAM programmers greater opportunity to explore alternative solutions and produce more efficient toolpaths. Uphill corner finishing A new uphill cutting option produces Corner Finishing toolpaths where steep corners are machined in an upwards direction only. This can improve cutting conditions, reduce the likelihood of cutter vibration, increase tool life and improve surface finish. Model filleting PowerMill can now automatically add fillets to the internal corners of CAD models during the calculation of certain toolpaths. This can help prevent overloading cutting tools and allows CNC machines to achieve programmed feedrates, reducing overall cycle times. Speed improvements PowerMill 2020 includes multiple speed-ups that have a significant impact on toolpath calculation, simulation and verification times. Commonly used toolpath types including: Raster, Corner Finishing, Constant Z, 3D Offset, and Area Clearance can be as much as 67% faster than PowerMill 2019, and often faster than PowerMill 2016. ViewMill simulations and NC program verification times are now up to 33% faster in 2020 than 2019.

Upload: others

Post on 05-Oct-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: The expert high-speed and multi-axis solution...multi-threaded leads and links, uphill corner fi nishing, a new model fi lleting option and more. What’s new The expert high-speed

For more information visit www.autodesk.com/MAKE

Introducing PowerMill 2020, our expert CAM software just got a whole lot fasterPowerMill 2020 offers signifi cantly faster toolpath calculation, quicker simulation and verifi cation, multi-threaded leads and links, uphill corner fi nishing, a new model fi lleting option and more.

What’s new

The expert high-speed and multi-axis solution

Visit www.powermill.com to fi nd out more

Faster leads and links PowerMill makes better use of multi-threads (cores) to calculate leads and links up to 60% faster than PowerMill 2019. This reduces programming times whilst giving CAM programmers greater opportunity to explore alternative solutions and produce more effi cient toolpaths.

Uphill corner fi nishing A new uphill cutting option produces Corner Finishing toolpaths where steep corners are machined in an upwards direction only. This can improve cutting conditions, reduce the likelihood of cutter vibration, increase tool life and improve surface fi nish.

Model fi lleting PowerMill can now automatically add fi llets to the internal corners of CAD models during the calculation of certain toolpaths. This can help prevent overloading cutting tools and allows CNC machines to achieve programmed feedrates, reducing overall cycle times.

Speed improvements PowerMill 2020 includes multiple speed-ups that have a signifi cant impact on toolpath calculation, simulation and verifi cation times.

Commonly used toolpath types including: Raster, Corner Finishing, Constant Z, 3D Offset, and Area Clearance can be as much as 67% faster than PowerMill 2019, and often faster than PowerMill 2016.

ViewMill simulations and NC program verifi cation times are now up to 33% faster in 2020 than 2019.

Page 2: The expert high-speed and multi-axis solution...multi-threaded leads and links, uphill corner fi nishing, a new model fi lleting option and more. What’s new The expert high-speed

Improved monitor support PowerMill icons have been enhanced to better support monitors with high DPI settings, such as 4K monitors.

Replacing tools The ability to replace the tool used by multiple toolpaths within a Setup has been improved to ensure toolpaths are only updated if the tip geometry is the same as the previous tool.

Access help content Several options on the Help menu are combined to make it easier to access the information you need. See the latest help and getting started documentation online at http://help.autodesk.com/view/PWRM/2020/ENU/.

Rotation anchor The Dynamic Center and Dynamic Cursor options are now supported when the model is displayed as a wireframe and when the graphics window contains few objects.

Boundaries in Setups Boundaries calculated within a machining Setup now take the toolpath clamp settings into account, helping to avoid collisions.

Make Great ProductsAutodesk manufacturing software helps you make better quality products, faster. Machine, print, inspect, and fabricate parts efficiently.

• Complete modular manufacturing solutions – CAM, additive, composites • Manufacturing expertise to automate, optimize and integrate your manufacturing processes,

in addition to your software • Cloud-connected so you can collaborate and manufacture anytime, anywhere.

Learn more at www.autodesk.com/MAKE.

“I had experienced regular problems with other CAM software so choosing PowerMill was a no-brainer. The 5-axis simulation and

verification tools help me sleep at night.” — Marius Pantea

Production Manager RM Design and Engineering

Autodesk, and Autodesk PowerMill are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2019 Autodesk, Inc. All rights reserved.