the filter instruction manual · 5.0 preparing the coffee machine: 5.1 unpacking: 5.1 a) carefully...

SPRADA filter manual changes 4/16/07 11:25 AM

Composite

C M Y CM MY CY CMY K

THE FILTER

INSTRUCTION MANUAL

FILTER


Composite


1

A. Bean Container Lid

B. Bean Container

C. Fineness Selector Dots

D. Feeder Channel Cover with Window

E. Water Container Lid (open)

F. Cover Lid

G. Goldtone Filter

H. Filter Holder Insert with Drip Stop (Fig 6)

I. Filter Holder

J. On/Off Push Button (red light)

K. Display

L. Programming Button

M. Auto-On Push Button (green light)

N. Stainless Steel Carafe with Lid

O. Pedestal

Fig. 1


Composite


2

Fig.2 Fig.3 Fig.4

Transport protection tape

Fig.5 Fig.6

Removable Soft Collar

Fig.7

Lid closed for brewing

Fig.8 Fig.9 Fig.10

Lid open for pouring

1 x 4

Fig.11 Fig.12 Fig.13

GoldTone Filter

Fig.14 Fig.15 Fig.16

Filter holder release button


Composite


3

TABLE OF CONTENTS

1. Welcome and Customer Service

2. Important information

2.1 About coffee Beans

2.2 Water Quality

3. Equipment

4. Machine Features

5. Preparing the machine:

5.1 Unpacking

5.2 Setting the real-time clock

5.3 Setting the “Auto ON” time

5.4 Setting the Grinder “NOW”

5.5 Setting the grinder “AUTO”

6. Power interruptions

7. Filling Beans

8. Filling water container

9. Filter Holder insert

10. Cover lid

11. Using the Stainless Steel carafe

12. Grinding and Brewing coffee:

12.1 Using Filter Paper

12.2 Drip Stop / Stop-And-Serve

12.3 Using different beans at different times

12.4 Using the coffee maker without the grinder

12.5 Grinding and brewing coffee later

13. Cleaning

14. Decalcifying

15. FAQ’s (Technical Question)

16. FAQ’s (Coffee Questions)

17. Limited One Year Warranty


Composite


1. WELCOME

Dear Customer,

Thank you for choosing a SPRADA product. With this filter coffee machine, you will enjoy full

taste and aroma right from the first cup. SPRADA is made with top quality components to ensure

quality and perfect safety. Please read these instructions carefully before using the SPRADA FILTER.

SPRADA S.A. in accordance with its policy of continuous improvement, reserves the right to make

any technical and structural modifications without prior notice.

IMPORTANT: This appliance is intended for home use in accordance with the descriptions and

instructions contained in this manual. Please read the instructions carefully and keep them, as they

could be useful to you in the future.

ATTENTION

• This appliance is built according to current regulations for recycling.

• Do not throw away the packing materials used to protect the appliance during transportation,

but take them to relevant collecting centres.

• Use only original SPRADA spare parts.

• SPRADA declines liability for any damage or accident derived from any use of this appliance,

which is not in conformity with the instructions contained in this booklet.

NOTE: All SPRADA products undergo strict controls before leaving the company. Evidence of

this may be present by means of ground coffee powder in the machine, water droplets and other

traces of coffee making functions.

4


Composite


5

PRECAUTIONSKEEP THESE INSTRUCTIONS

• Read these instructions for use carefully before using the appliance.

• Use which does not comply with these instructions will invalidate the warranty.

• The wiring system to which the appliance is connected must always comply with the laws in force.

• Before connecting the appliance, make sure that the mains voltage is the same as the voltage

indicated on the data label of the appliance and that the power outlet is connected to earth

• Always turn off the appliance at the on/off switch before unplugging it.

• Do not pull the power cord out of the socket, but grasp the plug itself to avoid damage to the

socket.

• Do not allow the power cord to be twisted, crushed, stretched, or come into contact with sharp

or hot surfaces.

• Do not use the appliance if the power cable or other important parts are damaged.

• Do not use electric extension leads that are not authorized by the manufacturer, as they may cause

damage or fire.

• If it is necessary to replace the power supply cable, please refer to the nearest Sprada S.A. authorized

service centre, since the use of a special tool is necessary.

• Do not use the appliance near a bathtub, shower or container full of water.

• Never immerse the appliance, the cable or the plugs in water or any other liquid.

• Use of the appliance in places where there is a danger of explosions is prohibited.

• Do not use the product with toxic substances.

• Do not lay the hot appliance on surfaces sensitive to heat.

• Do not leave the appliance exposed to wind or rain.


Composite


• Do not place the appliance near a live element, an electric stove or any other source of heat.

• Do not expose the appliance to extreme temperatures.

• Never let children or people who are not familiar with how the appliance works use it.

• Do not press the buttons hard or with a pointed object such as pen.

• Always rest the appliance on a stable surface.

• In case of an accidental fall of the appliance it is necessary to have it checked by an authorized

service centre as the internal safety features may have been affected.

• In case of a breakdown or malfunction, switch off the appliance and never attempt to disassemble

it but refer to an authorized service centre.

• In order to avoid prejudicing the safety of the appliance, use only original spare parts and

accessories approved by the manufacturer.

• Do not wind the power cord around the appliance, especially when the appliance is still hot.

• Position the machine on a horizontal surface

• Do not use lime scale removers which are not authorized by the manufacturer.

• Check that there is water in the reservoir before turning on the machine.

• Always fill the water reservoir with cold, clean water. Do not use milk or any other liquid.

• Do not wash coffee machine accessories in the dishwasher.

• Do not direct the steam jet at electrical appliances.

• Let the appliance cool down before cleaning the hot water nozzle.

• Danger of burns - Never place your hands inside the jet of steam.

• Danger of burns - Do not direct the steam jet at people, animals or debris.

• Never use beans treated with additives, such as sugar or similar substances.

6


Composite


2. IMPORTANT INFORMATION:

2.1 ABOUT COFFEE BEANS:

• True coffee roasts are recognizable by its dark colour, typical “crème” and rich flavour.

• The flavour and aroma of a coffee bean are the result of a roasting process. Darker coffee

beans have been roasted for a longer time at a higher temperature, and are more aromatic

than lighter coffee beans.

• There are many different types of coffee available on the market, containing blends of beans

roasted at different temperatures with different types of aroma. There is also decaffeinated

coffee containing only 2% caffeine. Try using different types of coffee with your SPRADA

FILTER machine to fine tune the flavour and aroma that best suits your taste.

• Ideally, coffee beans should be ground just before using them. Remember that your coffee

MUST BE SUITABLE FOR FILTER MACHINES ONLY, which means it must be ground quite

finely and roasted accordingly.

• It is a good idea to keep ground coffee in a hermetically sealed container as coffee easily absorbs

odours.

2.2 WATER QUALITY:

• IMPORTANT: To prevent problems caused by lime scale build-up, it is important to use the

SPRADA FILTER machine with a good quality water source. You may use our lime scale remover

(descaling tablets or the Lime’O Powder) available from Sprada Direct: 0861 777 232, as

described in the section on the 14 Decalcifying.

3.0 EQUIPMENT

The SPRADA FILTER machine comes with:

a. this instruction manual

b. Sprada warranty card

c. one Sprada A5 Product brochure

d. one sample pack of Biscotti

e. one sample pack of Espresso Chocolate beans

f. coffee 250g

7


Composite


Burr-Grinder Features:

• Heavy duty, commercial mill with burr / cone grinder delivers slow, precise and no-heat grinding to

preserve natural bean aroma.

• Grinds directly into the filter holder (I).

• 90g Bean capacity hold beans for up to two pots of coffee.

• Settings for 4; 6; 8 or 10 cups of coffee indicated on the LCD Display (K).

• Fine tune the grind for mild, regular or strong coffee.

• Turn the bean container from left to right to change the grind settings from finer to coarser

in four steps.

4.0 MACHINE FEATURES:

This Sprada Filter machine has a long list of features.

Coffee Maker Features:

• After grinding, Sprada Filter automatically returns to the filter holder (I) and starts the brewing process.

• In case the filter holder (I) is moved inadvertently underneath the grinder, push the release button to

return it to its original position.

• The Drip-Stop function lets you pull out the Stainless Steel carafe (N) and serve a cup or two before

brewing is finished.

•1000 watt heating system delivers 93˚C. contact / brew temperature and up to 82˚C. in the Stainless

Steel carafe (N) after brewing.

• Brews through a closed lid (E) and keeps coffee hot for up to four hours.

• Easy to read LCD display (K) with AM/PM clock and 24-hour programming.

• Auto shut off after brewing is finished.

• The Sprada Filter machine can be used with or without the grinder, accommodating the use of other

pre-ground coffees.

• Goldtone Filter (G) included.

• European 10-cup capacity (47oz.).

8


Composite


9

5.0 PREPARING THE COFFEE MACHINE:

5.1 UNPACKING:

5.1 a) Carefully remove the machine and all accessories from the packaging, keeping the packaging

for possible future transporting and storing.

5.1 b) Remove protective cover on top of the grinder.

5.1 c) Read the warning label on top of the water container lid (Fig 1,E) and remove the label.

5.1 d) Open the water container lid and remove the Cover Lid, the Goldtone Filter and the Filter

Holder Insert (Fig 1 I, E, F, G, H).

5.1 e) Now remove the transport protective tape (it wraps from the inside of the filter holder

into the water tank) (Fig 2).

5.1 f) Remove the Stainless Steel Carafe from the pedestal, replace the Filter Holder Insert

(Fig. 4) and insert the Goldtone Filter. Make sure to place the Cover Lid correctly on top

of the Filter Holder Insert (Fig. 5).

IMPORTANT: After reading these instructions, brew 3 to 4 cups of water to flush out the

internals of the system. This process is only necessary once upon first use.

5.2 SETTING THE REAL-TIME CLOCK:

5.2 a) Plug in the machine and switch it ON – Important: The actual time must be programmed

before you can operate the coffee maker. If you do no set the real-time clock, the LCD

display (K) will show “TIME <AM>” and it is not possible to turn on the coffee maker.

5.2 b) Rotate the P-button (L) to select either AM or PM.

5.2 c) Push the P-button: LCD Display shows TIME <HRS 12>.

5.2 d) Rotate the P-button to select the hours, example: TIME <HRS 3>.

5.2 e) Push the P-button: LCD Display shows TIME <MIN 00>.

5.2 f) Rotate the P-button to select the minutes, example: TIME <MIN 16>.

5.2 g) The Display now shows TIME 3:16 AM – This is the time that has been set. P-button

needs to be depressed to confirm the selection - If it is not pressed within the next THREE

seconds, the settings 3:16 AM/10c MEDIUM will display. These are the default factory

grinder setting.


Composite


5.3 SETTING THE “AUTO-ON” TIME: (default 11:11 AM)

NOTE: If you push the P-button and do not perform any programming functions, the display will

revert back within a few seconds to the actual time and actual grinder settings.

Display: 3:16 AM/10c MEDIUM.

5.3 a) Push the P-button. The display will show PROGRAMMING GRINDING?>

5.3 b) Rotate the P-button. PROGRAM <TIME ?> will display.

5.3 c) Press the P-button. AUTO ON <TIME ?> will display.

5.3 d) Push the P-button AUTO TIME <AM>

5.3 e) Rotate the P-button to select either AM or PM and push the P-button to confirm.

AUTO TIME <HRS 11> will show on the display.

5.3 f) Rotate the P-button to select the desired hours (example 6).

5.3 g) The display will show AUTO TIME <HRS 6>.

5.3 h) Push the P-button to confirm the hours selection.

5.3 i) Rotate the P-button to select the desired minutes (example 20).

5.3 j) The display will show AUTO TIME <MIN 20>.

5.3 k) Push the P-button to confirm the minutes selection.

• NOTE: You have now set the AUTO-ON time. After a few seconds the display will automatically

return to the actual real-time.

• To check the Auto-Time, push the A-button (M) the button will illuminate green and the display

will show: 6:20 AM / 10 c MEDIUM.

• Push the A-button again, the green illumination will disappear and the display will revert to the actual

real-time and grinder settings. NOTE: “10 c MEDIUM” is the default grinder settings for the

Auto-ON function.

10


Composite


1 1

5.4 SETTING THE GRINDER “NOW”: (default 3:16 AM / 10c MEDIUM)

NOTE: The Sprada Filter has two grinding options; for immediate use, it will show “NOW” on

the LCD display and show “AUTO” for an auto-on program.

For the following examples, we are setting the grinder for immediate use to “6 CUPS MILD”

and the Auto-ON use to “8 cups STRONG”.

Example: Setting the grinder to 6 cups MILD “NOW”.


5.4 b) Push the P-button. The display will show GRINDING <NOW?>

5.4 c) Push the P-button. The display will show GRINDING NOW <10 c >

5.4 d) Rotate the P-button to select from 4, 6, 8 or 10 cups. The display will now show

GRINDING NOW <6 c >.

5.4 e) Push the P-button. The display will show TASTE NOW <MEDIUM >.

5.4 f) Rotate the P-button to select from MILD, MEDIUM, STRONG. The display will

show TASTE NOW <MILD >.

5.4 g) Push the P-button. The display will now show the actual time and the new grinder setting

6 c MILD.

5.4 h) Push the P-button to confirm the new settings. The display shows the actual time and

the new grinder setting 6c MILD: “3:16 AM / 6c MILD”.

5.5 SETTING THE AUTO-ON GRINDER TO 8 CUPS STRONG:


5.5 b) Push the P-button. The display will show GRINDING <NOW?>

5.5 c) Rotate the P-button to select auto. The display will show GRINDING <AUTO?>.

5.5 d) Push the P-button. The display will show GRINDING AUTO <10 c >.


Composite


5.5 e) Rotate the P-button to select from 4, 6, 8 or 10 cups. The display will now show

GRINDING AUTO <8 c >.

5.5 f) Push the P-button. The display will show TASTE AUTO <MEDIUM >.

5.5 g) Rotate the P-button to select from MILD, MEDIUM, STRONG. The display will show

TASTE AUTO <STRONG >.

5.5 h) Push the P-button to confirm the new settings. The display will immediately revert to

the actual setting: “3:16 AM / 8c MILD”.

• NOTE: To check the Auto-Setting, push the A-button (M) the button will illuminate green and

the display will show: 6:20 AM / 8 c STRONG.

• Push the A-button again (M), the green illumination will disappear and the display will revert to

the actual real-time and grinder settings.

6.0 POWER INTERRUPTIONS:

• NOTE: If you have a power interruption or if you unplug the machine for less than 2 to 3

minutes, the display and all set functions will remain. If the machine was set to AUTO, it will still

grind and brew coffee at the pre-set time. If the machine was brewing coffee, it will continue

brewing until the water tank is empty.

• If the machine is unplugged or if you have a power interruption for more than 2 to 3 minutes,

the time function will be lost. If the coffee maker was set to AUTO, no coffee will be ground and

the filter will still sit underneath the grinder. If the machine was brewing coffee before power

interruption, it will not continue brewing.

• If the power comes back on again, the LCD display (K) will show TIME<AM>. You must set

the time again, as from 5.2 above.

• NOTE: Your personal grinding settings and the Auto-ON time will maintained.

12


Composite


1 3

7.0 FILLING THE BEANS:

• Fill the Beans Container (Fig. 1, B) with beans. Make sure that the water container lid is closed

to prevent beans from spilling into the water container.

• Caution: Check the beans for foreign objects. The beans container holder approximately 90grams

of beans (good for almost two full pots of coffee). Select the fineness setting (Fig. 3) by turning

the bean container until the line matches up with one of the fours dots in front of the bean

container. For first time use, we recommend the coarsest setting – the largest dot.

NOTE: Never fill the bean container with frozen or coated beans of any sorts.

Damage of the machine resulting for this reason will not be covered by warranty.

8.0 FILLING WATER CONTAINER:

•Open the Water Container Lid (Fig. 1,E) and fill the Water Container with a desired amount of

fresh, cold water. NOTE: Never fill water above the “MAX” line on the water container.

9.0 FILTER HOLDER INSERT:

CAUTION: If the filter holder insert (Fig. 4) is not completely locked into the filter holder, the

drip stop on the bottom of the filter holder insert might not open during brewing. This can cause

hot coffee to overflow and can result in serious injuries and damages. Here is how to properly lock

the filter holder insert into the filter holder:

9.0 a) Open the Water Container Lid (Fig. 1, E).

9.0 b) Remove the cover lid (Fig. 5).

9.0 c) Remove the Stainless steel carafe (N) from the pedestal and then lower the filter holder

insert with tab of the filter holder insert pointing towards the water container. Push the handle of

the filter holder insert down towards the water container and make sure it sits completely flush with

the rim of the filter holder (Fig. 4).


Composite


9.0 a) Push with your finger against the drip stop (Fig. 6). If the filter holder insert is in the proper

position, it will stay inside the filter holder and not move upwards.

9.0 b) Insert the Goldtone Filter (Fig. 1, G).

9.0 c) Place the cover lid on top of the filter holder insert. Make sure is sits flush inside the rim

of the filter holder (Fig. 5).

CAUTION – MESSY AND DANGEROUS:

If you forget to place the filter holder insert in the filter holder and you slide the filter holder

underneath the grinder, is will start grinding and will spread the ground coffee onto the countertop.

It will then return the filter holder underneath the water container and the brewing process will

start, splashing hot water everywhere. In this case, immediately push the On/Off

button to turn off the machine and wait until the machine stops pumping water!

NOTE: Always move the holder WITH the filter holder insert AND the Goldtone filter (G)

underneath the grinder.

10.0 COVER LID (Fig 5.)

The cover lid minimizes static coffee particles clinging to the outside of the filter holder. We recommend

using this lid when you grind for six or more cups of coffee.

Cleaning: Wipe the lid clean after each use. IMPORTANT: The lid is not Dishwasher safe!

Note: The lid has two parts: a soft, removable collar and a hard disk. If you accidentally remove the

collar, just replace is in its original position (with the high rim pointing upwards).

14


Composite


1 5

11.0 USING THE STAINLESS STEEL CARAFE (14):

IMPORTANT: If you lose the lid, you cannot brew coffee.

Contact Sprada Direct on 0861 777 232 to order a new lid.

• For the best coffee temperature, pre-warm the carafe with some hot water prior to use. Always

make sure the carafe is completely empty.

• Place the lid on top of the carafe and rotate it one complete turn clockwise until closed

(Fig. 7). Do not over-tighten.

• Place the carafe onto the pedestal.

• CAUTION: Make sure the lid is NOT in the pouring position (Fig. 8).

• Note: the lid must always be on the carafe and closed (Fig. 7) during the brewing process to

activate the Drip-Stop function.

• Always make sure that the carafe is transported in an upright position. If you turn the carafe with

its lid closed onto its side or upside down, hot coffee will flow into the grooves of the lid and exit

through the side of the lid (Fig. 9).

• NOTE: A Stainless steel bottom with three black feet, covers the vacuum seal of the stainless

steel body. Do not try to remove this lid. Do not place the carafe on any hot surfaces since this

can loosen the vacuum seal inside the bottom. This can cause the carafe to loose its warm keeping

function.

• Do not place the carafe into the dishwasher.

12.0 GRINDING AND BREWING COFFEE “NOW”:

• Select the cup strength setting (as in 5.4 above).

• Fill the beans container (as in 7.0 above).

• Fill the desired amount of water into the water tank.

• Make sure the filter holder insert, Goldtone Filter (or filter paper) and cover lid are in place

(as in 9.0 above).


Composite


12.1 USING FILTER PAPER:

NOTE: Use “size 4” filter paper only. Always fold the bottom and side crimps over for a proper

fit (Fig. 10). Do not use a filter paper inside a Goldtone Filter!

12.1 a) Insert Swing the filter holder to the left until it locks itself underneath the grinder

(Fig. 11).

12.1 b) Place the Stainless steel carafe with the closed lid onto the pedestal (O).

12.1 c) Push the On/Off button (Fig. 1, J). The red light turns ON.

The grinder will start grinding and the coffee will fall into the filter. Through the

window in the feeder channel cover (Fig. 1, D) you can actually see how the coffee

moves forward. After the grinding has finished, the filter holder will automatically

swing back and underneath the water container lid and the brewing process will

begin.

FIRST TIME GRINDING: First use of the grinder will yield a bit less ground coffee (which is

used to fill the feeder channel (D) initially). All further grinding will yield the correct amount of

ground coffee.

CAUTION: As long as the grinder is in operation, do not open the bean container lid and do not

insert your finger or any other foreign object into the grinder.

CAUTION: Do not open the water container lid during the brewing process. Hot water could

spill out, causing serious injuries.

12.1 d) After brewing is complete, the red light in the On/Off button will turn off. For the next

1 to 2 minutes hot coffee will still pass from the filter into the carafe, producing coffee.

12.1 e) To serve coffee, remove the carafe from the pedestal. Turn the lid counter clockwise until

the black dot is over the pouring spout (Fig. 8). You can now pour coffee. After serving,

make sure to close the lid again to prevent heat from escaping from the carafe.

CAUTION: Before pouring fresh water into the water container again, let the machine cool down

for a few minutes.

16


Composite


1 7

12.2 DRIP STOP / STOP-AND-SERVE:

While the coffee is brewing you can remove the carafe to pout a cup or two. The Drip Stop in

the filter holder will close automatically. Replace the carafe within 20 seconds. Then the flow of

coffee continues.

CAUTION: The Drip Stop might not close completely allowing coffee to drip onto the pedestal.

In this case, immediately replace the carafe onto the pedestal and let the coffee flow into the

carafe. (This happens when the mesh of the Goldtone Filter is clogged up causing coffee grounds

to over-flow. If you use filter paper, use the correct size (size 4), and check if there was a hole in

the bottom of the filter paper). To clean the Drip stop, see 13 below.

12.3 USING DIFFERENT BEANS AT DIFFERENT TIMES:

Some people like to drink different types of coffee at different times. In this case, only fill the

required amount of coffee beans into the bean container that you need in order to grind for your

next pot of coffee. For example, if you want 8 cups of coffee, fill eight level scoops of coffee into

the bean container.

12.4 USING THE COFFEE MACHINE WITOUT THE GRINDER:

You can use your Sprada Filter Machine without the grinder like a regular drip coffee maker. In

this case, do not move the filter holder underneath the grinder.

12.4 a) Open the water container lid (Fig 1, E).

12.4 b) Fill the desired amount of cold, fresh water into the water container.

12.4 c) Remove the cover lid from the filter holder and set it aside.

12.4 d) Fill the desired amount of ground coffee into the Goldtone Filter (or “size 4” filter paper).

12.4 e) Close the water container lid.

12.4 f) Make sure that the carafe (with the lid in the “closed” position) sits underneath the filter

holder on the pedestal. Make sure the Drip-Stop is pushed upwards (Fig 1, E).

CAUTION: If the drip-stop sits next to the top of the lid, then the coffee will not flow into the

carafe, but overflow from the filter holder.

12.4 g) Push the On/Off button (J) until the red light turns ON. The brewing process starts

immediately.


Composite


12.5 GRINDING AND BREWING COFFEE LATER (“AUTO” MODE):

12.5 a) Program the timer and grinder settings (as in 5.4 above).

12.5 b) Fill beans into the bean container and the desired amount of fresh water into the water

container.

12.5 c) Make sure that the filter holder insert, Goldtone Filter (or paper filter) and cover lid are

all in place.

12.5 d) CAUTION: Before you swing the filter holder underneath the grinder, make sure there

are no grounds left over in the filter holder from previous grinding.

12.5 e) Swing the filter holder to the left until it locks itself underneath the grinder (Fig 11).

12.5 f) Now push the “A” button (Fig 1, M). The button will illuminate green and the display will

switch from the actual time to the “NOW” grind setting, to the Auto-ON time and the

Auto grind setting. At the programmed time, the green light will turn off, the red light on

the On/Off button will illuminate and the grinding / brewing process will begin.

13.0 CLEANING AND MAINTENANCE:

• Make sure the machine is turned off and has cooled down.

• Never use scouring or abrasive agents.

• Never immerse the machine under water.

• Never clean the machine under running water.

18


Composite


1 9

Dishwasher safe (upper rack): Goldtone Filter and filter holder insert.

Special cleaning tips:

Cover lid: Wipe the cover lid clean after every use. DO NOT CLEAN IN THE DISHWASHER!

If the soft collar becomes separated from the lid, simply replace it with the high rim pointing

upwards (Fig 5).

Goldtone Filter: Clean after brewing. Do not let used coffee sit for hours in the filter. Coffee

oils will clog the mesh, causing the coffee to overflow the next time it is used.

Filter Holder insert / Drip stop: Clean the filter holder insert and the drip-stop under running

water. Check that the drip-stop opens and closes completely under running water too.

Bean Container: When the bean container is empty, use a dry cloth to wipe out the coffee

oil deposits left inside the container. Never try to disassemble the bean container.

Burr Grinder / Burrs: It is possible that small coffee particles might get stuck in the burrs

grinder. Once every two months, let the beans container run out of beans. Remove the Stainless

Steel Carafe and make sure the Goldtone filter is in place. Move the filter holder underneath the

grinder. Set the grind fineness to the larges / coarsest grind (the largest dot). Push the On/Off

button. While the machine is grinding, tilt the machine forward and give it a gentle pat on the back

to release coffee grounds. This will loosen any coffee grounds and particles and transport them

into the filter holder. Repeat as necessary.

Cleaning the Feeder Channel: Periodically, check the feeder channel for oil deposits and coffee

buildup. As long as you can see coffee flowing freely through the feeder channel window there is

no need to open the cover.

The feeder channel should be cleaned in any of the following situations:

• Moisture or heavy oil build up has caused the ground coffee to block the feeder channel.

• You do not plan to use the grinder for more than a week.


Composite


For cleaning, please follow this sequence:

• Make sure the Goldtone Filter or a filter paper is inserted in the filter holder insert.

• Move the filter holder underneath the grinder until it locks.

• Lift the Feeder Channel cover and set aside (Fig. 12).

• Use the handle of the scoop to scrape out blocked coffee into the filter holder (Fig 13).

• Wipe the inside with a dry, clean cloth.

• Push the manual release button (Fig.14). The filter holder will swing back to the right.

• Wipe the inside of the feeder channel cover with a dry cloth (do not immerse in water).

• Replace the feeder channel cover.

• Empty the Goldtone Filter or filter paper.

14.0 DECALCIFYING:

As a guideline we recommend decalcifying at least every 6 months or whenever the brewing

process slows down. If brewing ten cups of water takes more than 10 minutes it is definitely time

to decalcify.

Attention:

• Before decalcifying, remove the Goldtone Filter.

• All decalcifying agents are acidic and must be handled carefully.

• Check the information on the packaging before use.

Caution: Never open the water container lid as long as the machine processes any liquid. Hot

water could spill out causing burns and injuries. Wait until all water is processed through the

machine or until the on/off button is no longer illuminated.

20


Composite


2 1

14.1 Decalcifying with LIME’O:

Sprada recommends LIME’O for drip coffee makers. LIME’O removes any calcium deposits up

to 20 times faster than vinegar. LIME’O is available through www.sprada.ch

14.1 a) Remove Goldtone Filter.

14.1 b) Fill water container with 500ml of cold water and add the LIME’O.

14.1 c) Important: make sure the filter holder is in place and the stainless steal carafe is empty.

14.1 d) Turn the machine ON.

14.1 e) When the solution has run through, remove the carafe, empty and rinse thoroughly.

Important: Let the machine cool down for 5 minutes.

14.1 f) Fill 500ml of fresh cold water into the water tank and brew through the machine.

14.2 Using other decalcifying agents:

Only use decalcifying agents suitable for drip coffee makers and follow the instructions which

come with the agent.


Composite


15.0 FAQ’S (Technical questions):

Q1. I accidentally locked the filter holder underneath the grinder. What do I do?

A. Push the manual filter holder release button (Fig. 14).

Q2. There is no coffee coming out of the grinder. It seems as though the coffee is

completely clogged inside the grinder. What do I do?

A. Please follow the steps outlined in chapter 13.0.

Q3. Can the grinder run without beans in the bean container?

A. Yes.

Q4. Can I have a different grinding setting for the current and the programmed mode?

A. Yes! (see chapter 5.4)

Q5. How long does the machine keep the grinding and brewing settings?

A. See chapter 5.4. The programmed setting is activated only when you push the “A” button

(Fig. 1, M) and the green auto light turns on.

Q6. How do I know if the display shows the current or the programmed setting?

A. In the program mode the “A” button is illuminated green.

Q7. Can I change any settings while the grinder is running?

A. No. The red On/Off light or the green Auto light has to be “Off ” to change the grinder settings.

22


Composite


23

Q8. What happens if the filter holder does not return underneath the water container

lid after grinding?

A. After the grinding process is complete, the swing-back mechanism will try to return to filter

holder. If it does not swing back sufficiently, the machine will automatically turn itself off to prevent

the coffee maker from brewing.

Q9. What happens if the water container lid is open during the brewing process?

A. The hot water will splash out in spurts and be guided back into the water container. Immediately

close the water container lid.

Q10. Beans spilled into the water container. What do I do?

A. Unplug the machine, remove the carafe, empty the bean container (as well as you can), remove

the filter holder insert and the Goldtone Filter, open the water container lid and turn the machine

upside down over a sink. Reset the time.

Q11. What happens in the auto setting (the green light is on) if I forget the push the

filter holder underneath the grinder?

A. You will get hot water. At the pre programmed time, the green light will turn off and the red

light will turn on. If the filter holder is still underneath the water container lid, the machine assumes

you want to brew coffee only (without grinding). Since there is no coffee in the filter holder, the

carafe will be filled with hot water.


Composite


16.0 FAQ’S (Coffee questions):

Q1. How much coffee should I use?

A. The grinder grinds between approximately 6 seconds (setting “4, mild”) and 30 seconds (setting

“10, strong”). The maximum amount of coffee will be ground in the setting “10, Strong” with the

fineness selector in the coarsest position.

EXAMPLE: For 10 cups of coffee: fill the water container with the maximum amount of water.

Set the grinder to 10 cups, the strength indicator to mild, and the fineness selector to fine.

• IF THE COFFEE IS TOO STRONG; change the grind amount indicator to 8, the strength indicator

to medium, and continue to use the same amount of water.

• IF THE COFFEE IS NOT STRONG ENOUGH; leave the grind indicator at 10, change the strength

indicator to strong, and set the fineness selector to the coarsest position (largest dot). If the

coffee is still not strong enough, use a little less water.

Q2. I want a full pot of coffee at 8:00 AM.

What time should I program the grinder to start?

A. Set the timer 15 minutes earlier (this case 7:45 AM)

Q3. Can I grind “espresso beans” for my espresso machine?

A. Before final assembly we manually calibrate each pair of burr grinders (testing with beans!) to

prevent clogging while grinding, regardless of which type of beans you use. The actual grinding,

however, is designed well with drip coffee brewing. As a result, the grind may not be suitable for

your espresso machine

Q4. The grinder makes a loud noise, no coffee is processed?

A. A foreign object blocks the grinder. Contact SPRADA DIRECT: 0861 777 232

24


Composite


17.0 Limited One Year Warranty:

This limited warranty covers your new SPRADA FILTER. This warranty is in effect for the period

and usage described above from the date of the first purchase and is limited to South Africa and

neighbouring SADEC Countries. This warranty covers all defects in material or

workmanship (parts and labour).

TRANSPORT when sending the machine, use original packaging materials, the inner and outer

cartons or use approximately 2” of bubble wrap and secure the machine properly. Any damage

in transit is NOT covered by this warranty.

This warranty does not cover:

• Any machine not distributed by Sprada SA.

• Any machine not purchased from an authorized dealer.

• Damage cause by accident, abuse, negligence, misuse, improper operation or failure to follow

instructions contained in this manual.

• The machine is plugging into an unsuitable power voltage or short-circuited due to water spillage.

• Any service or alterations performed by and unauthorized person, company or association.

• Damage caused by neglecting and omitting maintenance, cleaning and decalcifying.

• Damaged caused by ingredients not allowed in this product.

• Damage to the Stainless Steel carafe due to improper use.

Other limitations and exclusions:

Any implied warranties including fitness for use and merchantability are limited in duration to the

period of the express warranty set forth above and no person is authorized to assume for SPRADA

SA and other liability in connection with the sale of the machine. SPRADA SA expressly disclaims

liability for incidental and consequential damages cause by the machine. The terms “Incidental

damages” refer to the loss of the original purchaser’s time, loss of the use of the machine or other

costs relating to the care and the custody of the machine.

25


Composite


The terms “consequential damages” refer to the cost of repairing or replacing other property

which is damaged when this machine does not work property. Any loss of income is excluded.

The remedies provided under this warranty are excluded and in lieu of all others. This warranty

gives you specific legal rights, and you may also have other rights which vary from Province to

Province.

IMPORTANT: This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities or lack of experience and knowledge unless they have been

given initial supervision or instruction concerning the use of the appliance by a person responsible

for their safety.

26


Composite


AGENT STAMP

FILTER

TEL: +27 21 712 4657 webs i te : www.sprada.ch

the filter instruction manual · 5.0 preparing the coffee machine: 5.1 unpacking: 5.1 a) carefully...

Documents