The Innovative

Bed Liner System

The Rhino Linings System

is a trendsetting lining technology

for a variety of bed liners.

The system consists of the following components:

A 2-component mixing and processing system of various types, lining

materials, and technical application

support from the Rhino Linings partners.

The Rhino Linings System is used worldwide,

and is successfully used in many different areas (automobiles, buildings, other industrial applications), to protect against corrosion/abrasion.

Rhino Linings’20+ years of experience in

polyurethane processing in addition to numerous patents make the Rhino Linings dealer a competent partner for technically high-quality, environmentally sound bed liners.

Tuff StuffRhino Linings Tuff Stuff: the universal 2-K-Polyurethane lining.Tuff Stuff can be used on all common surfaces with many different types of subsurfaces and provides optimal protection against corrosion, surface abrasion, and weather and environmental influences. The homogenous Tuff Stuff lining is environmentally friendly (no solvents/CHCs), easy to clean (hygienically approved for foodstuffs) and easy to apply (spray process). The surface can be applied in smooth or textured finishes (non-slip) and matched to any desired color.

Sled Prototype

Pick-Up Bed

Station Wagon Bed

DurabondRhino Linings Durabond is[t] a highly wear-resistant 2-K-Polyurethane lining.

Durabond is used as a protective lining against surface abrasion on metal and wooden surfaces in automotive manufacturing and for industrial applications.

Bed of a flat-bed trailer Feed Hopper for a Conveyor

Dump Truck Bed

Hi-ChemRhino Linings Hi-Chem highly chemically –resistant 2-K-Polyurethane lining.

Hi-Chem is used as a protective lining against corrosion and surface abrasion of metal and concrete surfaces.

Filter Casing

Electroplating Tub

Container Interior

Composition of Rhino Linings’ Protective Lining

• UV Top coatProtects the polyurethane lining against discoloring and fading, facilitates easy cleaning.Use: ca. 100 g/m²

• Rhino Linings Tuff Stuff, Durabond, Hi-Chem

Protective lining used against corrosion, surface abrasion and/or for surface improvement.Lining thickness: min. 3 mm

• Rhino Linings Primer 251Optimal adhesion of the lining onto the substrate.

Use: ca 80-100 g/m²

• Substrate (metal, wood, concrete, epoxy-glass resin, etc.)Surface: roughened, free of grease, dry, and load-supporting.

Processing of Rhino Linings

The Rhino Linings protective lining is applied by a spray-on process.

The solvent-free polyurethane mixture is sprayed on by means of dry compressed air. This process allows for a seamless coating on all types of surface shapes.

The high flexibilitity and elasticity of the protective lining allows for a seamless lining of large areas and a homogenous all-over lining (floors, walls, ceilings) of interior spaces and automobile bodies.

Expansion joint in a concrete floor

Spraying on the protective coating

All-over lining of a van

Types of Surfaces

The lining sufaces may be applied per requirements in “matte,” “textured,” or “sanded” finishes.

For “textured” surfaces, one can choose a grade from “fine” to “coarse.”

As a sanding material, copper slag, quartz sand, corundum, or rubber granules are used for slip resistance, per requirements.

A variety of colors is obtainable through the use of intermixable pigments.

To further increase weather and light resistance, sealing with a UV top coat is possible.

Matte Protective Lining

Sanded Tail-lift Gate Textured Surface