the inside story - john deere · 4 the inside story – john deere reman starter barrel insulation...
TRANSCRIPT
![Page 1: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/1.jpg)
The Inside StoryJohn Deere Reman Starter Comparison
![Page 2: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/2.jpg)
The Inside Story – John Deere Reman Starter2
Why the John Deere Reman Starter?
• Designed to meet customer demands
• Provide customer a low-cost repair alternativeo Competitively Priced, Typically 30%-40% less than new
• All units meet or exceed John Deere original specifications
• Factory backed warranty of 1 year/unlimited hours if dealerinstalled
• Remanufactured, NOT Rebuilt
![Page 3: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/3.jpg)
The Inside Story – John Deere Reman Starter3
Packaging
• John Deere Reman foampackaging fully protects unitduring shipment.
• This extra protection couldpotentially reduce downtime.
• Safety kit included.
• Competitive starters are notproperly packaged to protectit from damage duringshipment
![Page 4: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/4.jpg)
The Inside Story – John Deere Reman Starter4
Barrel Insulation
• John Deere Reman barrelassembly is coated with paintinside to protect against rust.
• If barrel is not protected with arust inhibitor, this can eat away atthe installation over time causingfailure of the unit.
• Competitive products arenot always properly coatedto protect from rust.
![Page 5: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/5.jpg)
The Inside Story – John Deere Reman Starter5
Barrel Assembly Pole Shoes
• John Deere Reman pole shoesare coated with a rustpreventer.
• A rust protector will protectfrom an electrical short in theunit.
• The pole shoe must beproperly coated to protectfrom rust.
![Page 6: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/6.jpg)
The Inside Story – John Deere Reman Starter6
Application Specific Jump Start Protection for
• John Deere Reman unit hassafety cover that fullyprotects against jumpstarting.
• All starters come with jumpstart safety kit to protectfrom potential injury.
• Competitive products are notalways equipped with propersafety covers andinstructions.
![Page 7: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/7.jpg)
The Inside Story – John Deere Reman Starter7
Starter Brushes
• John Deere Reman starterbrushes are properly seated toensure proper contact witharmature commutator.
• Starter will be low on powerwhich could result in a slow orno start situation.
• Brushes must be properlyseated to perform atacceptable levels. These arenot.
![Page 8: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/8.jpg)
The Inside Story – John Deere Reman Starter8
Properly Clocked
• John Deere Reman starters areproperly clocked, perapplication.
• This will decrease installationand downtime.
• Some competitive startersare improperly clocked.
• This will increase installationtime as well as machinedowntime.
![Page 9: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/9.jpg)
The Inside Story – John Deere Reman Starter9
Solenoid
• John Deere Reman solenoidsare remanuactured 100% toOEM specifications.
• This ensures product integrity
• Not all solenoids are new whencomparing to John DeereReman. Some still havecorrosion from this competitor.
![Page 10: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/10.jpg)
The Inside Story – John Deere Reman Starter10
Armature Shaft
• John Deere Reman armature shaftsare balanced and straightened toallow starter drive to engage fully.
• If drive does not engage fully itcould result in a premature failure.
• Competitive armature shafts willbe reused, as in this one, ratherthan proper balancing.
![Page 11: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/11.jpg)
The Inside Story – John Deere Reman Starter11
John Deere Reman Starter Summary
• Remanufactured not rebuilt
• Completely disassembled
• 100% replacement of worn parts
• Armatures are balanced 100%
• Each unit is tested for amperage and torque load
• All units meet or exceed John Deere Specifications
• All John Deere Reman starters carry a 1 year/unlimited hours parts and laborwarranty if dealer installed.
![Page 12: The Inside Story - John Deere · 4 The Inside Story – John Deere Reman Starter Barrel Insulation • John Deere Reman barrel assembly is coated with paint inside to protect against](https://reader034.vdocument.in/reader034/viewer/2022042908/5f39389d3f8abf44323ce34a/html5/thumbnails/12.jpg)