563288 13-1.1

NO.

1 4

1

1

22

2

1

1

1

1

1

1

1

2

3

4

5

6

7.1

7.2

8.18.28.3

9

10

Expansion bolt components

Clamp

Drainage pipe

Flush pipe

Drainage straight pipe components

Flush straight pipe components

Long bolt

Transparent long bolt shield

Long bolt components

Plug

To fix frame

To fix drainage pipe

To drain

To supply water to flush

To connect the bended pipes to toilet bowl

To fix toilet bowl

To shield long bolt To fix toilet bowl

To reserve space for straight pipes when laying bricks

NAME QTY FUNCTION

On-off For Filling WaterAngle valve

THE INSTALLING INSTRUCTION FOR CONCEALED TANK

FFL

Note:1.Please install the frame before paving the tiles. The dimensional unit is millimeter. 2.Please subject to the object as right if it is not in conformity with the components in picture.

FFL of finish face, all dimension is millimeter

Important remind:Please read through this Instructions carefully prior to installation, and our company shall not be responsible for any loss caused by not installating accrding with this Instructions. There are lubricantsin production for toilet bowl installation.Please confirm the FFL according to the overall indoor fitment method. Line out the FFL on the wall and always regard FFL as datum line of 0 height.

Accessories List:

1.

2.

3.80mm 300kgf Please confirm the wall is the main wall ,the thickness exceed 80mm and it can bear more than 300kgf strength when the strength act on the front of toilet bowl.

8

978.2

8.3

300kgf

FFL 0

main wall

Protection frameFor space reservation of push button plate when building the wall

To prevent sundries falling into the tank when fitmentProtection cover

Straight flush pipe of some products are offered with two kinds of seal gaskets A.B which can be selected according to toiletbowl type during installation.

A.B

B

A7.2

7.1

8.1

Please make sure W is between 70 to 130.130

1. Dimensions and Supply Pipe-laying

Top inlet

Back inlet

安装墙Main wall

Main wall

130

安装墙Main wall

500

FFL 0

1000

230180

1185

35

320

100

40(4

0~24

0)

G1/2

400-100

135(135~220)

110(110~195)

0~200

340

360

FFL 0

1000

1170

G1/2

400-100

135(135~220)

110(110~195)

0~200

1048

.5

Main wall

130

Please make sure W is between 70 to 130.130

°

80/100W

12

1Position1 W=60 /802Position2 W=80 /100

12

When excretory tube lean 45° it can only be fixed in Position 2(W=80/100).

45 2(W=80/100)

2.Drainage Pipe Installation

If necessary, adjust the clamp and drainage pipe location according to the bowl dimension. (Keep this clamp tightened to professionals!)

Remind: The function of drainage would be worse when the installation angle of drainage pipe exceed 45°

Install drainage pipe clamp.

1. 10X 502.3.4.5.3.

1.

4.

2.

5. 6.

10X 50

10mm

50mm

3.Drill on the main wall and floor 4.Install Expansion Bolts

As shown on picture:1.Drill 10*502. Insert expansion bolt 3. Tighten nut to strain bolt; 4. Unscrew nut;5.Hold screw and washer for later use.

“a” should be adjusted according to real location of drainage pipe.

1000

FFL0

360

340B

a

1170

A

100

998

101

102

1m

5. Install Wall-fixing bracket and adjust floor-fixing bracket

Wall-fixing bracket

Floor-fixing bracket

6. Adjust horizontally and vertically, and tighten bolt:

Please pre-tighten bolt, and tighten after bracket adjustment.

A

B

2

11

A

B

C

D

E

“Click” “Click”F

1

3 19

2

Install angle valve, connect it to inlet valve with hose.

Angle valve

Supply pipe

Flexible hose connecting inlet valve

20~60mm

7.Install Plug:

Sketch of installed frame

8.The thickness of fixed wall is 20~60mm(measured from the front of frame to the finished tile surface)

20~60

“Click”

Important remind: When the concealed tank fixed completely, it is important to test leaking with water upon 12 hours before fixing wall.

180230

For the fixing of the long screw, there are two groups of screw holes on the bracket which are of different distance. Please choose the right position according to the size of the toilet bowl.

9.Install toilet bowl：

d

L2L1

L1+6mm

L2+3mm

Set Straight Pipes into Flush Bend and Drain Bend properly, and marks lines.

Add lubricant onto the Rubber Gaskets of two Straight Pipes and set them into Bowl. Flush Pipe seal Gasket assembly see 3.1, 3.2 and 3.3 .

Mark lines as shows. L1 is the distance of two marks on Flush Straight Pipe, and L2 is that of two marks on Drainpipe Straight Pipe. Cut Straight Pipe just as shows.

Chamfer and trim the cutting edges on the shortened Straight pipes (as shows). Adjusting length for Bolt is d+25mm as shows.

First install Drain Straight Pipe into Drain Bend, and second install Flush Straight Pipe into Hole on Bowl. Install Bowl. Station Bowl properly.

1. 2. 3.

4. 5. 6.

7. 8. 9.

10. 11. 12.

Take out the sponge with silicon oil and smear it on connecting edges of Straight Pipe and Bends.

All data contained is based upon the last product information available at the time of publication. We reservesthe right to implement changes of product characteristics, packaging and availability at any time without further notice.

TOTO (CHINA) CO., LTD.After Service Free Tel: 800-820-9787Mobile telephone:400-820-9787

10.Installation of tank fittings:

The tank fittings have been installed before leaving factory. The above sketches are only for reference.

A

B

1

2

3

4

A

1

2 B

5

1

2

21

3.1 3.2 3.3