The modern solution to in-situ

concrete stairs

FLEXISTAIR is a permanent, lightweight galvanized steel shuttering system for forming an in-situ stair. For use on reinforced concrete and steel buildings.

The FLEXISTAIR System

We offer:

• AComprehensiveDesignService - ensuring the finest attention to detail from the outset, specifically for your project.

• BespokeManufacture- crafted by our highly experienced and skilled tradesmen to your specification.

• DeliverytoSite- together with a generic method statement and lifting plan for the installation.

www.flexistair.comwww.flexistair.com

Bespoke Design

FLEXISTAIR offer a full range of permanent or sacrificial balustrading, manufactured from mild steel to stainless steel, with various balustrade options such as toughened glass, structural glass and polyester powder coated perforated sheet.

Specification

The finish of stairs can be basic or advanced to suit any design requirements. External surfaces can simply be painted to provide a smooth background, ready for final decoration. FLEXISTAIR can provide polyester powder coated soffit panels with integral lighting. Alternatively, plasterboard or any other finish can be used.

FLEXISTAIR will assist in the design at the very initial stages, working with engineers/architects to provide a fully bespoke service, ensuring the final product suits your specification perfectly.

www.flexistair.comwww.flexistair.com

STRINGERS

• Galvanized steel• Painted finish • Can be clad in powder

coated aluminium

SOFFIT

• Powder coated aluminium panel

• Feature groove in soffit allows for LED lighting

BALUSTRADES

• Pre-installed sacrificial balustrade

• Painted steel balustrade• Stainless steel balustrade • Glass infill• Perforated Panels infill

The FLEXISTAIR System

Once delivered to site the composite sections of flights/landings can be simply hoisted into position, leaving the final task of completing the rebar connections and pouring of the concrete.

FLEXISTAIR comes with the half landing and rebar fully installed as standard which speeds up the build programme and safety constraints. A temporary or permanent balustrade is included, dependent on individual project

requirements, which negates the cost of erecting temporary scaffold and provides operative protection from day one.

There are lifting points on each section of the stair. Simply connect a 4 leg chain, and hoist into position. FLEXISTAIR will provide a generic method statement and hoisting plan on request.

www.flexistair.com

FLEXISTAIR installation.

FLEXISTAIR installation. FLEXISTAIR manufacture.

• Improved Health and Safety• Quick and simple installation• Direct cost saving• No need for temporary scaffold rails

www.flexistair.com

Advantages in using FLEXISTAIR

A key design advantage of the FLEXISTAIR system is the permanent galvanised steel shuttering, with no need to install timber shuttering or the need to strike once the concrete is cured, as opposed to traditional shuttering methods.

The FLEXISTAIR system is installed as the concrete frame progresses, enabling you to walk on the staircase the following day. The half landing is integral to this system, with no need to install shuttering or rebar, simply crane the unit into position.

A pre-attached balustrade (no leading edge at any point of installation) is included, this can be a sacrificial balustrade or permanent to suit the projects needs.

A typical level takes less than 1 day to install, just add final rebar connections and the concrete pour, and that’s one floor complete, no striking of shuttering, just back prop the half landing and the stair can be in full use the following day.

FLEXISTAIR is adaptable to suit design requirements, tailor-made for each project and is safe and easy to install.

www.flexistair.com

VERSATILEANDCOSTEFFECTIVE

www.flexistair.com

Installation Procedure

From the engineers/architects drawings FLEXISTAIR will produce a detailed drawing for approval/comment.

Stairs will be manufactured to suit an agreed programme of works and delivered to site, ready for installation by your appointed site contractors.

Once construction has reached the point where the stairs are ready to be installed. A section of the stair can be hoisted into place, the rebar connected, the stairs lined and levelled. Then the concrete can be poured. The stairs will be ready to be walked on 24 hours later.

1.

2.

3.

READYTOUSEIN JUST 24 HOURS

Index Date Description AuthorP1 02/08/2012 First Issue For Approval DtmA 19/12/2012 Construction Issue Dtm

1. This drawing must not be scaled.General Notes

REVISIONS

[G] -

advancesteelF Unit 5, Zone C, Chelmsford Road Ind. Est.

Great Dunmow, Essex, CM6 1HDTel: +44 01371 878600 Fax: +44 01371 878608

e-mail: shaun@alloyfabweld.comWeb: www.alloyfabweld.com

ALLOY FABWELDA

C62-3672

As Noted

A

Dtm 06/08/2012

Flexi Stair

01J1392

Berkeley Homes

Cambridge College Brunswick

FPL1

FPL1

FPL1

Elevation 1:25

B1

B3

B2

B2

B1

B1

Plan 1:25

Elevation Concrete Only 1:25

1904 154

1904 154

1405.6

1904

2925

2925

2925

+19.175

+16.250

+13.325

+10.400

+17.712

+14.787

+11.862

2925

2925

2925

1462

.529

2529

2514

62.5

+19.175

+16.250

+13.325

+10.400

FFL

FFL

FFL

FFL FFL

FFL

FFL

FFL+19.050

+16.125

+13.200

+10.250

SSL

SSL

SSL

SSL

AA

Section A-A 1:33.3 Section B-B 1:33.3

200 5000.1 200

1904

200 5000.1 200

1904 154

1082

1282

Section C-C 1:33.3

200 5000.1 200

1135.6

1904 115

1082

200

1082

BB

BB

CC

Edg

e of

Sla

b an

d S

cree

d

Edg

e of

Sla

b

Edg

e of

Sla

b

Edg

e of

Scr

eed

4

E

F

E

F

E

F

4 4 4

162.

5

250

3096.1

15 1081

15

15

1081

1081

1889 15

1889 15

1904

1889 15

3D View

750 750

75 75

125 125

FLEXISTAIR production stages.

www.flexistair.com

Contact us today for more information about the benefits of

theFLEXISTAIRsystem:

Telephone: 01371 878600Mobile: 07967 478 655

Email: info@flexistair.com

www.flexistair.com