the new line contouring solution for face and body · 16beon-gi, giheung-gu, yongin-si,...
TRANSCRIPT
Contact Information:
Head Office: T. +82-2-572-1331 F. +82-2-572-1060
1st Factory: T. +82-70-4735-0035 F. +82-70-4735-0040
Email: [email protected]
Address: #502, Daewoo Frontier Valley I, 16-25 Dongbaekjungang-ro,
16Beon-gi, Giheung-gu, Yongin-si, Gyeonggi-do, Korea
X
The New Line Contouring Solution for Face and Body
Combination technique of HA filler and Thread
2 3
The New Combination of Filler and Thread
The SMART solution of safe‚ minimally invasive procedure helps “Lifting and Volumizing” anti-aging for the ideal result in a short time.
epiticon is a scaffold that promotes fibroblast activity and helps to trigger collagen neo genesis in a soft tissue. e.p.t.q. is a supplement(=filler) at the defective site of soft tissue.
‘epiticon x e.p.t.q.’ solution gives ‘Lifting & Volumizing’ effect at once.
Safe biodegradable material
Strictly controlled manufacturing process
Low side-effect
Safety
No surgery! Simple and easy minimally invasive procedure
No aftercare is neededMinimally invasive
Ideal appearance by the simultaneous effect of “Lifting & Volumizing”
Customized design & procedure for patient
Simple reconstruction and easy repeated injection
Anti-aging
Cost effectiveness is increased by the mutual supplementation procedure
Long duration due to the dual action of “filler & thread”
High patient satisfaction by total anti-aging solution
Result
Total procedure time of 30 minutes
Short downtime and recovery timeTime
e.p.t.q.HA
filler
epiticonPDO, PCL
threadSMART solution
“Highly augmented results are observed when threads are combined with fillers.”
e.p.t.q. filler: supplement role epiticon thread
: scaffold role
4 5
Exquisite Technique, Contented for Safety with The 9 Essential Process
2. Less than 0.1 EU/ml endotoxin3)
Endotoxin level of all e.p.t.q. are produced with less than 0.1EU/mL (much more less than the criterion of EP standard) according to Jetema’s strict manufacturing process.Modification and cross-linking paramenters in hyaluronic acid hydrogels-Definitions and analytical methods
Lennart Kennea, Suresh Gohila,*, Eva M. Nilssonb, Anders Karlssonb, David Ericssonb,1, Anne Helander Kenneb, Lars Ⅰ. Nordb aDepartment of Chemistry, Uppsala BioCenter, Swedish University of Agriculyural Sciences, P.O. Box 7015, SE-750 07 Uppsala, SwedenbQ-Med AB, Seminariegatan 21, SE-752 28 Uppsala, Sweden
MoD (Degree of Modification) is the scale for modification of HA by BDDE.
MoD = Full cross-linked BDDE + Pendant type BDDEThe lowest MoD makes best safety requirement.
Residual BDDE is one of the critical issue about the side effects of the filler. It can provoke swelling, allergic symptom, and cancer.
1.Correlation between filler quality and MoD
2. MoD level test1)
e.p.t.q. Lidocaine S100 e.p.t.q. Lidocaine S300 e.p.t.q. Lidocaine S500 J filler of A Y filler of L N filler of M
MoD (%) 1.45 1.98 2.72 7.68 8.07 11.23
e.p.t.q has the lowest MoD level among monophasic fillers.
The Lowest MoD Level for Safety
The 9 Essential Process Excellent Quality
Fully reacted BDDE Pendant BDDE Deactivated BDDE
Incomplete Cross-linking HA gel e.p.t.q. HA Gel
3. Excellent cohesiveness4)
e.p.t.q. S500 : 0.5583Y of L company : -0.1917
Gap(mm)
Force(N)
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
0 2 6 8 10 12
-0.8
N of M company : -0.4479
Gap(mm)
Force(N)
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
0 2 6 8 10 12
-0.8
Gap(mm)
Force(N)
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
0 2 4 6 8 10 12
-0.8
Gap(mm)
V of J company : -0.6433
Force(N)
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
0 2 4 6 8 10 12
-0.8
The hyaluronic acid filler e.p.t.q. is produced according to the “The 9 Essentials Process” which is strictly controlled that promises an exquisite product that meets stringent safety standards.
The Ⅸ Essential Process1. Safety of raw ingredients managed in exclusive lines2. High purity HA content for duration and prevention of swelling3. High viscoelasticity for exquisite lift up4. Homogeneous particle implementation technology to complete exquisite molding5. No detection of residual chemical catalyst substance(BDDE) through the complete crosslinking process6. Aseptic manufacturing environment to prevent side effects7. Less than 0.1 EU/ml of endotoxin8. Minimizes pain with the same pH and osmotic pressure as the human body9. Optimized injection pressure for exquisite procedures
1.Ideal complex viscosity2)
e.p.t.q.’s ideal viscoelasticity lifts up the tissue enabling easy molding and natural beautiful shape.
Product Pa.s(1Hz)
E Filler of H (Ultra Volume Plus with Lidocaine) 48
Y Filler of L (Volume Plus with Lidocaine) 49
J Filler of A (Ultra Plus XC with Lidocaine) 45
R Filler of A (Sub-Q Plus with Lidocaine) 55
S 500 59E Filler of H
80
60
40
20
0
Y Filler of LJ Filler of A
R Filler of A
E Filler of H
Y Filler of L
J Filler of A
R Filler of A
2,3) Data on Jetema
4) HA(Hyaluronic acid) dermal filler rheology comparing test, Chung-Ang University Hospital Korea 2017 1) HA(Hyaluronic acid) dermal filler rheology comparing test, Chung-Ang University Hospital Korea 2017
Cohesiveness can be defined as a resistance to compression/stretching forces in a vertical plane once the product is implanted.e.p.t.q. has excellent cohesiveness which makes the molding easier and migration less likely.
productendotoxin
(EU/
mL)
R Filler of G0.5
R Filler of A0.5
T Filler of T0.1
e.p.t.q.0.045
Endotoxin0.6
0.5
0.4
0.3
0.2
0.1
0
6 7
The World’s First Dual Action Thread
conventional cog thread (bi-directional) epiticon contouring thread
25mm
92mm 70mm
25mm
60mm
155mm
187mm
80mm
100mm
70mm
Safe Cannula Tip that reduces vascular injuries
W/L - blunt cannula
60mm64 Multi Anchoring Points
19G cannula
90mm96 Multi Anchoring Points
18G cannula
Lifting Gathering Tightening Smoothing
Fixation by sending the thread upward
Fixation by gathering the skin
Fixation at the injection point
Fixation by smoothing �ne wrinkles and revitalizing
4. The way of dual action
1. New patented structure5) Patented Structure (WO 2017/131416A2)Each unit of epiticon carries out a dual action and fixation.
2. Immediate effect Each unit of epiticon has an immediate effect of
dual action of lifting and fixing.
3. Delayed effect
Even if the thread breaks or partially melts, constant fixing effect continues by the multi anchoring points constituted of units.
“Non-heat treatment press molding Method8)” sets the manufacturing temperature to less than the raw materials’ melting point.
Maintains the unique physical properties of the raw materials of the suture to keep high tensile strength and durability.
Simple and Easy of Use
The tensile force6) is more than 5 times higher7) than previously existing cutting threads.
Simple and easy procedure with thread with blunt cannula makes the safe procedure result.
Epiticon is individually packed in blisters to maximize stability and to prevent moisture and/or contamination.
Previous Cutting Thread epiticon
8.0N
44.8N
Strong Tensile Force6)Innovative Dual Action
5) International patent WO2017/131416
6) KTR (Korea Testing & Research Institute) tensile load test MSK-2018-0003337) Data on file 20188) Product standard report 2018
Points that are fixed to the skin tissue
The part of the unit that has opposite resistance
Lift-up Fixation
Unit
2.0mm 2.0mm 2.0mm
Lift-up Fixation
8 9
Lift-up with epiticonLift-up with epiticon
Before
Before
epiticonX
e.p.t.q.
epiticonX
e.p.t.q.
Before
Before
epiticonX
e.p.t.q.
epiticonX
e.p.t.q.
Volume-up with e.p.t.q.Volume-up with e.p.t.q.
FACE BREAST
The SMART solution can be sophisticated according to the patient’s condition, resulting in natural volume and younger look.
Simultaneous ‘Lifting and Volumizing’ effect
10 11
Product Specification
Cross-inking level Gel Texture Concentration Needles Injection Depth
e.p.t.q. S100 ●○○ HA 24mg/ml 27G, 30G Superficial / Mid dermis
e.p.t.q. S100lidocaine
●○○ HA 24 mg/mlLidocaine 0.3% 27G, 30G Superficial / Mid dermis
e.p.t.q. S300 ●●○ HA 24mg/ml 27G Mid / Deep dermis
e.p.t.q. S300lidocaine
●●○ HA 24 mg/mlLidocaine 0.3% 27G Mid / Deep dermis
e.p.t.q. S500 ●●● HA 24mg/ml 25G, 27G Subcutaneous / Supraperiostal areas
e.p.t.q. S500lidocaine
●●● HA 24 mg/mlLidocaine 0.3% 25G, 27G Subcutaneous / Supraperiostal areas
e.p.t.q. S500for body
●●● HA 24mg/ml Body
• Product Name: Biomaterial for tissue repair• Indications: Temporary improvement of facial wrinkles• Product Classification: single-use sterile medical device• Package Information: Face: 1 Pre-filled syringe (1.0 mL) * 2 needles / Body: 3 Pre-filled 5ml syringes with 3.5cc / Box• Storage condition: 2⁰C - 25⁰C / Do not freeze or heat the product / Keep away from direct light
PDO PCL
Product Code 19G-060 18G-090 19G-060 18G-090
Thread Length 6cm 9cm 6cm 9cm
Cannular Size 19G 18G 19G 18G
No. of Units 64 96 64 96
USP 3-0 2-0 3-0 2-0
Biodegradation period 16~24 months 6~8 months
• Package Information: 8 sutures*5 packs / box
• Cannular Type: W / L type
Innovative MAS (Multi Anchoring System) 5 PACK / BOX
Contouring Thread
Dual action of innovative MAS (Multi Anchoring System) 40 EA / BOXDual action of innovative MAS (Multi Anchoring System) 40 EA / BOX
PDO
Contouring Thread
Co
nto
uri
ng
Th
read
PDO
Lift-up with epiticon Volume-up with e.p.t.q.
HIP
Before
Before
epiticonX
e.p.t.q.
epiticonX
e.p.t.q.
X