The pictures are linked to the product page.

www.we-online.comElectromechanical One-Click Selection Guide

WERI Connectors

Pin Header WR-PHDPitch: 1.27 ~ 2.54 mmConstruction: THT, SMTType: straight, angled, board stacker, low profileRows: single, dual

Socket Header WR-PHDPitch: 1.27 ~ 2.54 mmConstruction: THT, SMTType: straight, angled, bottom entry,

large bottom entry, low profileRows: single, dual

Jumper WR-PHDPitch: 1.27 ~ 2.54 mmType: with test point, with pullbackDescription: black, red, blue

MiniModule Connector WR-MM – PCB typeGender: female, maleConstruction: THT, SMTType: straight, angledLatch: with or without latchPolarization: with or without polarization

Board-to-Board Connectors WR-BTBPitch: 0.8 ~ 1.0 mm Gender: female, maleConstruction: SMTType: vertical

Board-to-Board

ZIF Connector WR-FPCPitch: 0.5 mm & 1.0 mmConstruction: SMTType: horizontal, vertical, low profileContact design: Bottom, Top, Type A contact;

Bottom / Top contact low profile; Bottom contact hinge type; Dual contact back locking

Flat Flexible Cable WR-FFCPitch: 0.5 mm & 1.0 mmType: contact on same side, contact on

opposite sideLength: 50 mm, 100 mm, 152 mm, 200 mm

FPC Connector & FFC Cable

Coaxial Connectors

SMA Series WR-SMAType: PCB, PanelGender: Jack, PlugOrientation: Right Angle, StraightTermination: THT, SMT, End Launch

Reverse Poliarity SMA Series WR-RPSMAType: PCBGender: JackOrientation: Right Angle, StraightTermination: THT, End Launch

Cable Assemblies WR-CXASYConfuguration: SMA-to-SMAGender: Plug-to-Plug, Plug-to-Bullhead JackCable-Type: Flexible, Hand-FormableCable-Length: 152.4 mm, 304,8 mm

MCXType: PCBGender: Jack, PlugOrientation: Right Angle, StraightTermination: THT, SMT, Press-In, End Launch, Crimp,

Solder

Adaptor WR-ADPTConfiguration: SMA-to-SMA, RPSMA-to SMAGender: Jack-to-Jack, Jack-to-PlugOrientation: Straight

Input/Output (I/O)

USB Connector WR-COMStandard: USB 2.0 / USB 3.0 / USB 3.1Construction: THT, SMT, THROrientation: Horizontal, Vertical, Up-Right,

Stacked, Short TypeType: Type A, Type B, Type C, Mini USB, Micro USB, Cables

HDMI Connector WR-HDMIShielding: Shielded, Half-shieldedConstruction: SMT, THRType: Standard (A), Mini (C), Micro (D)

HoodMaterial: Plastic, Matalized plastic Entry: Top entry, Small top entryScrews: 4 – 40

Card Connector WR-CRDType: Mini SIM, Micro SIM, Nano SIM,

SD 4.0 (UHS-II); SD, Micro SD, Compact Flash

Vertical Modular Jack WR-MJShielding: shielded, plasticConstruction: THT, SMTLED: with, withoutxPxC: 4P4C, 6P4C, 6P6C, 8P8C

Modular Jack 45° WR-MJShielding: plastic, shieldedConstruction: THTLED: withoutxPxC: 8P8C

Crimp Contact WR-DSUBGender: Male, Female

Male Connector WR-DSUBType: IDC, Solder bucket, Crimping housing,

Straight, Angled

Female Connector WR-DSUBType: IDC, Solder bucket, Crimping housing,

Straight, Angled

DC Power Jack WR-DCType: right angled, verticalShielding: plastic, shieldingConstruction: THT, SMT

Wire Protector System WR-TBLPitch: 3.5 mm ~ 10.0 mmModularity: modular / not modularWire: 1.5 mm² ~ 3.3 mm²PCB type

Rising Cage Clamp System WR-TBLPitch: 2.54 ~ 10.16 mmModularity: modular / not modularWire: 0.8 ~ 13.3 mm²PCB type

Pluggable Cable System WR-TBLPitch: 2.5 ~ 7.62 mmModularity: modular / not modularWire: 1.5 mm² ~ 3.0 mm²PCB, Cable type

Spring Clamp System WR-TBLPitch: 2.54 mm ~ 10.16 mmModularity: not modularWire 0.5 mm² ~ 5.26 mm²PCB type

Adhesive Marker CardPitch: 2.54 mm – 10.16 mmHeight: 2.8 mm – 5.0 mm

Terminal Block

Fuseholder Blocks WR-FSHCover type: Clip coverFuselink: 5 mm x 20 mmPCB type

Cover for Fuseholder Blocks WR-FSH

Shocksafe Fuseholder WR-FSHCover type: turn‘n lock, screw‘n lockFuselink: 5 mm x 20 mmOrientatation: vertical, horizontalPCB, Panel type

Fuseholders

Coding keyPitch: 3.5 mm, 3.81 mm, 5.0 mm,

5.08 mm & 7.62 mm

Battery Holders

Battery Holders WA-BCMCType: 2016, 2020, 2025, 2032, 2450Connection Type: SMT/THT

Battery Holder WA-BCPHType: 2025,2032,2450Connection Type: SMT/THT

Pre-crimped Wire WR-WTB, WR-MPC4, WR-MPC3Type: 30 cm crimped both ends,

15 cm crimped one end

Female Receptacle & Terminal WR-MPC3Pitch: 3.00 mmType: receptacle housing, female terminal No. of poles: 2 ~ 24

Wire-to-Board

Box Header WR-BHD – PCB typePitch: 2.00 mm & 2.54 mm Gender: maleConstruction: THT, SMTType: straight, angledDimensions: with or without short or long lever

IDC Connector WR-BHD – IDC for cablePitch: 2.00 mm & 2.54 mmGender: female, male, transitionDimensions: with or without strain relief

Male Header WR-WTBPitch: 1.00 mm ~ 3.96 mmConstruction: THT, SMTType: vertical, right angled

Male Header & Plug WR-MPC4Pitch: 4.20 mmConstruction: THT Type: vertical, right angled, plug housing,

male terminalNo. of poles: 2 ~ 24

Female Receptacle & Terminal WR-MPC4Pitch: 4.20 mmType: receptacle housing, female terminal No. of poles: 2 ~ 24

Female Terminal Housing & Crimp Terminal WR-WTBPitch: 1.00 mm ~ 3.96 mmType: terminal housing, crimp terminal

Ribbon Flat Cable WR-CABPitch: 1.0 mm & 1.27 mm

MiniModule Connector WR-MM – Cable typeGender: male IDC, transition

LED Connectors

Board to Board Solution WR-LECOPitch: 1.5 mm – 2.54 mmType: Plug / Receptacle / Hermaphroditic

Wire to Board Solution WR-LECOPitch: 4.00 mmSMT soldering profile

REDFIT IDC SKEDD Connector WR-WSTPitch: 2.54 mm

MMCXType: PCBGender: Jack, PlugOrientation: Right Angle, StraightTermination: THT, SMT, End Launch, Crimp, Solder

Male Header & Plug WR-MPC3Pitch: 3.00 mmConstruction: THT, SMTType: vertical, right angled,

plug housing, male terminalNo. of poles: 2 ~ 24

Horizontal Modular Jack WR-MJShielding: shielded, half-shielded, plasticConstruction: THT, SMTLED: with, withoutxPxC: 4P4C, 6P2C, 6P4C, 6P6C, 8P8CTab: up, down, down & up

The pictures are linked to the product page.

www.we-online.com

Switches

Rotary Switches

10 x 10 mm THT right angled WS-ROTUPitch: 2.54, 5.08 mmPosition: 10 & 16Actuator type: Arrow, crossCode: real, complementwashable

Segment Wheel & Spindle for 10 x 10 mm WS-ROSV / ROTV / ROTUColor: Black, Blue, Grey, Red

7 x 7 mm SMT WS-ROSVPosition: 10 & 16Actuator type: Arrow Code: real, complementwashable

10 x 10 mm SMT WS-ROSVPosition: 10 & 16Actuator type: Arrow, Shaft, crossCode: real, complementwashable

10 x 10 mm THT WS-ROTVPosition: 8, 10 & 16Actuator type: Arrow, Shaft, crossCode: real, complement washable

7 x 7 mm THT WS-ROTVPosition: 10 & 16Actuator type: Arrow Code: real, complementwashable

2.54 mm THT compact WS-DITVActuator: flat, raisedNo. of poles: 1 ~ 12 Operation force: 800 ~ 1000Life cycle: 2000non-washable

2.54 mm THT small compact WS-DITVActuator: flat, raise No. of poles: 1~12 Operation force: 600 ~ 1000Life cycle: 2000washable, non-washable

Dip Switches

2.54 mm SMT small compact WS-DISVActuator: flat, raisedNo. of poles: 1 ~ 12Operation force: 600Life cycle: 2000washable, non-washable

1.27 mm SMT small compact WS-DISVActuator: flat, raisedNo. of poles: 1 ~ 12Operation force: 500Life cycle: 1000 washable

2.54 mm THT right angled compact WS-DITUActuator: raisedNo. of poles: 2 ~1 0Operation force: 800Life cycle: 2000non-washable, WE-utility patent

Illuminated Switches

Caps for 12 x 12 mm WS-TATL Size: 13.4 x 13.4 mmBase color: Black

Caps for 15 x 15 mm Illuminated THT WS-PBTLSize: 15 x 15 mm and 17.4 x17.4 mm Base color: Transparent

12 x 12 mm Illuminated THT WS-TATLHeight: 8.2 mmEmitting color: Red, Green, Blue, YellowLife cycle: 100000

6.8 x 4.5 mm Illuminated SMT WS-TASLHeight: 2.5 mmEmitting color: Red/Red, Bright green/Bright Green, Blue/Blue, Yellow/Yellow, Bright Green/RedLife cycle: 50000

20 x 20 mm Illuminated SMT WS-RPTLHeight: 14.45 mmEmitting color: Red / Bright GreenLife cycle rotary: 20000Life cycle push button: 50000

15 x 15 mm Illuminated THT WS-PPTLHeight: 19.5 mmEmitting color: Red / Green, RGBLife cycle: 1000000

Push Button Switches

9.8 x 18.5 mm SMT side push WS-PBSUHeight: 5.9 mm Schematic: SPDT, non-shortingOperating Force: 250 ± 100gLife Cycle: 30,000

9.8 x 18.5 mm THT right angled WS-PBTUHeight: 6.3 mm Schematic: SPDT, non-shortingOperating Force: 250 ± 100gLife Cycle: 30,000

Caps for 9.8 x 18.5 mm WS-PBSU / WS-PBTUColor: Black, Red

21 x 15 mm Rocker switch WS-RSTVCut out: 19.2 x 12.9 mmRating: 16(8)A, 250VACSchematic: SPST / DPSTTermination: Quick connect 0.187“Certification: UL,ENEC,CQC

Rocker Switches

31.5 x 18.5 mm Rocker switch WS-RSTVCut out: 27.6 x 13.8 mmRating: 16(4)A, 250VACSchematic: SPSTTermination: 0.25‘‘ Quick connectCertification: UL,ENEC,CQC

Ø 23 mm Rocker switch WS-RSTVCut out: Ø 20.2 mmRating: 10(4)A@ 250VAC or 10A@28VDCTermination: Quick connect 0.187“Schematic: SPSTCertification: UL,ENEC,CQC

12 x 12 mm THT WS-TATVHeight: 4.3 mm ~ 8.5 mmOperation force: 160 ~ 360Life cycle: 200000 ~ 500000washable

Tact Switches Tact Switches

6 x 6 mm THT WS-TATVHeight: 4.3 mm ~ 9.5 mmOperation force: 160 ~ 360Life cycle: 200000-1000000

6 x 6 mm J-Hook SMT WS-TASV Height: 3.4 ~ 5.1 mmOperation Force: 160~ 250Life cycle: 500000-1000000Hermetic serieswashable

12 x 12 mm SMT WS-TASV Height: 4.3 mm ~ 8.5 mmOperation force: 160 ~ 260Life cycle: 300000 ~ 500000

6 x 6 mm THT right angled WS-TATUHeight: 3.15 mm ~ 8.35 mmOperation force: 160 ~ 360Life cycle: 200000

5 x 5 mm SMT with ground Terminal WS-TASVHeight: 0.8 mm - 1.5 mmOperation force: 160 ~ 260Life cycle: 200000 - 1000000Termination Type: J bend, flat

4.5 x 4.5 mm SMT WS-TASVHeight: 3.8 mmOperation force: 160Life cycle: 1000000

3.7 x 3.7 mm SMT WS-TASVHeight : 0.35 mmOperation force: 160Life Cycle: 500000

6.0 x 3.8 mm SMT WS-TASVHeight: 2.5 mmOperation force: 160 ~ 260Life cycle 30000-50000Termination Type: flat, J-bend

6.0 x 3.5 mm SMT WS-TASVHeight: 4.3 mm ~ 5.0 mmOperation force: 160 ~ 360Life cycle: 30000 - 50000Termination Type: flat, J-bend

3.5 x 2.9 mm SMT side push WS-TASUHeight: 1.35 mmOperation force: 220Life cycle: 100000

4.2 x 3.2 mm SMT J-Bend WS-TASVHeight: 2.5 mmOperation force: 160~260 Life cycle: 50000~100000

3.5 x 2.9 mm SMT J-Bend WS-TASVHeight: 1.7 mmOperation force: 350Life cycle: 200000

6 x 6 mm SMT WS-TASVHeight: 2.5 mm ~ 9.5 mmOperation force: 160 ~ 360Life cycle: 200000 ~ 1000000Termination Type: flat, J Bend, gull wing, flat with GND terminal

Caps for 12 x 12 mm WS-TASV / TATVColor: Black, Red, Green

4.7 x 3.5 mm SMT side push WS-TASUHeight: 1.65 mmOperation force: 160 ~ 220Life cycle: 100000 - 200000Termination Type: flat, J-bend

10 x 2.5 mm THT WS-SLTVOpposite side connectionSchematic: SPDT non-shorting Switching function: On-OnLife cycle: 2000

10 x 2.5 mm THT right angled WS-SLTUOpposite side connectionSchematic: SPDT non-shorting Switch function: On-OnLife cycle: 2000

7.65 x 5.5 mm SMT WS-SLSVSame side connectionSchematic: DPDT non-shortingSwitch function: On-OnLife cycle: 20000

9.0 x 3.5 mm THT WS-SLTV Same side connectionSchematic: DPDT non-shorting Switch function: On-OnLife cycle: 20000

6.7 x 2.7 mm SMT right angled WS-SLSU Same side connectionSchematic: SPDT non-shorting Switch function: On-OnLife cycle: 10000

Slide Switches

Encoder Switches

11 x 13.75 mm THT Encoder Shaft with Bushing WS-ENTVHeight: 26.6 mmPulse: 08, 15, 20Detent: 16, 30, 20Schematic: incremental with (central) switch function

Detector Switches

Micro Switches

4.7 x 3.8 mm SMT WS-DESVHeight: 3.8 mmOperation force: 60Life cycle: 100000 Schematic: SPST-NO

12.8 x 5.8 mm THT Micro switch WS-MITVActuator Type: Actuator, Lever, RollerOperation force: 80 ~ 150Releasing force: 5 ~ 20Schematic: SPDTCertification: UL, ENEC

5.7 x 4.0 mm SMT WS-DESUHeight: 2.0 mmSchematic: SPST-NO / SPST-NCOperation force: 100Life cycle: 100000

Electromechanical One-Click Selection Guide

The pictures are linked to the product page.

www.we-online.com

REDCUBE Terminals Assembly Technique

Direct Plug Terminal WP-PLUGCurrent: up to 120 ATemperature: -45 °C up to +125 °CPackaging: Bulk

REDCUBE PLUG

Cable Connector WP-PLUG Cross section: 4 mm², 6 mm², 10 mm², 16 mm²Current: up to 120 ATemperature: -45 °C up to +125 °CPackaging: Bulk

REDCUBE SMT

Reverse Type WP-SMRTThrough hole: Ø 3.5, Ø 4.5, Ø 5.5Current: up to 85A Temperature: -55 °C up to +150 °CPackaging: Bulk, Tape & Reel

REDCUBE THR

Internal Thread WP-BUFU, WP-BUCF, WP-BUTRThread size: M2.5 – M10Current: up to 350 ATemperature: -55 °C up to +150 °CPackaging: Bulk

REDCUBE PRESS-FIT

External Thread WP-SHFUThread size: M3 – M10Current: up to 350 ATemperature: -55 °C up to +150 °CPackaging: Bulk

Right Angled WP-RAFU, WP-RATR Thread size: M3 – M8Through hole: Ø 3.2 – Ø 8.2Current: up to 350 ATemperature: -55 °C up to +150 °CPackaging: Bulk

Two-Part WP-TGTR, WP-TPSE Thread size: M3 – M8Through hole: Ø 3.2 – Ø 10.5Current: up to 320 ATemperature: -55 °C up to +150 °CPackaging: Bulk

Internal Thread WP-SMBUThread size: M3 – M5Current: up to 70 ATemperature: -55 °C up to +150 °CPackaging: Bulk, Tape & Reel

Right Angled WP-SMRA Thread size: M3Through hole: Ø 3.3Current: up to 50 ATemperature: -55 °C up to +150 °CPackaging: Bulk, Tape & Reel

Internal Thread WP-THRBUThread size: M3 – M5Current: up to 85 ATemperature: -55 °C up to +150 °CPackaging: Bulk, Tape & Reel

External Thread WP-THRSH Thread size: M3 – M5Current: up to 85 ATemperature: -55 °C up to +150 °CPackaging: Bulk, Tape & Reel

External Thread WP-SMSHThread size: M3 – M4Current: up to 50 ATemperature: -55 °C up to +150 °CPackaging: Bulk, Tape & Reel

Spacer StudsMaterial: Brass, Machined & Stainless Steel,

Polyamide, AluminiumThread: internal/external, internal/internalLength: 1 ~ 95 mmThread size: M2 ~ M6

Round SpacerMaterial: Brass, PolyamideLength: 1 ~ 50 mm

SMT Spacer Tape & Reel Material: Steel, tin-platedLength: 1 ~ 15 mmThread: M1.6-M4Thread: internal, external and with trough

hole for screw M2-M4

SMT Steel Spacer Reverse Material: Steel, tin-platedLength: 2.6-11.6 mmThread Size: M3 and through hole for M3 screw

Lock Screw for D-SUB Material: Steel tin-platedLength: 10 ~ 18.2 mmThread Size: UNC 4/40, M3

Spacer Studs & SMD Spacer

SpacerMaterial: Nylon 66Length: 1.5 ~ 80 mmHole diamenter: 2 ~ 5.9 mmLocking options: one end, both ends, snap rivet

Spacers

SMT Spacer fixed with Snap Rivet Material: Steel, tin-plated & PA66 Distances: 2-10 mm

Right Angled WP-SMRA Thread size: M3Through hole: Ø 3.3Current: up to 50 ATemperature: -55 °C up to +150 °CPackaging: Bulk, Tape & Reel

Mounting Button for SMT Spacer M3 Material: Nylon 66, UL94 V-0Color: Red, Black Panel Thickness: 1-2mmDrilling in Panel: 3.3mm

Distance Cap for SMT Spacer Ø 6 mm with fitting Plastic Screw Material: Nylon 66, UL94 V-0 or V-2 Length Screw: 4-10mm

Cable Holder Mounting: screwable, snap-in, self-adhesive Cable tie, cable twister, flat cable, round cable, self-adhesive base

Mounting Tabs

Material: Brass, tin-plated

Cable Holder, Mounting Tabs & Cable Lugs

Heat Shrink Tube WA-HSTType: N50, N55, N100, X385 Rate of shrinking: 2:1, 3:1Diameter before shrinking: 1.2 ~ 101.6 mm

Cable Protection

Plastic Caps for RJ45 Modular Jack WA-PCCA

Plastic Caps for RJ11 Connectors WA-PCCA

Plastic Caps for D-Sub WA-PCCA

HDMI + USB Connector Cover WA-PCCA

Connector Covers

Tubular Cable Lugs WA-CLUGMaterial: Cu-ETP, EN13600Surface: Tin platedFixing Hole: M3 ~ M10

Electromechanical One-Click Selection Guide