SCROLLSAW

A scroll saw is a small electric or pedal-operated saw that is useful for cutting intricate curves in cases where a jigsaw or coping saw is not appropriate. It is capable of creating curves with edges. It is named afterits traditional use in making scrollworks, which are sculptural ornaments that feature scroll-head designs.

Comparisons

It is somewhat similar to a band saw, but unlike band saws, in which the saw blade is a continuous loop, scroll saws use saw blades similar to thoseof coping saws and operate through a quick reciprocating up and down motion.A scroll saw has two main advantages when compared to a band saw. The firstis that the blade can be removed and placed in situ through a pre-drilled starting hole. This feature allows interior cutouts to be made without creating an entry slot for the blade through the edge of the workpiece. Second, a scroll saw can cut significantly more intricate curves.

BrandsMany different brands of scroll saws are on the market today. Hegner (Germany), Notable (made in Germany), Eclipse (made in the USA), and DeWalt(originally made in Canada, now in Taiwan), Excalibur (originally made in Canada, now in Taiwan).There are also a number of less expensive scroll saws manufactured in Asia,including those from Delta, Dremel (Bosch), Craftsman, Ryobi, and others.

SizeScroll saws are classified according to the size of their throat, which is the distance from the blade to the rear frame of the saw. The throat depth determines how large a piece of wood can be cut. Smaller saws have a throatof as little as 12 inches (300 mm), while commercial saws can approach 30 inches (760 mm). Before the era of computer automation, industrial saws were sometimes used to make even larger objects by hanging the top mechanical linkage from the ceiling, thus providing an arbitrarily deep throat.Scroll saws vary in price from under $100 to close to $2,000. The more costly saws are more accurate and easier to use, usually because they minimize vibration.

UsesScroll sawing is a popular hobby for many woodworkers. The tool allows a substantial amount of creativity and requires comparatively little space.

In addition, many scroll saw projects require little more than the saw itself, reducing the investment in tools.Scroll saws are often used to cut intricate curves and joints, a task they can complete quickly and with great accuracy. They can also be used to cut dovetail joints and are a common tool for thicker intarsia projects. When afine blade is used, the kerf of a scroll saw is all but invisible.Along with band saws, scroll saws are used with modern intarsia.Scroll saws are comparatively safe. In particular, inadvertent contact between the blade and the operator's fingers are unlikely to result in serious injury.

Mode of operationThere are several types of scroll saws. The most common design is the parallel arm, in which a motor is attached near the back of the arms and the two arms always remain parallel to each other. The C-arm variant uses asolid "C" shaped arm, with the blade being mounted between the two ends of the "C". The parallel link type, used by Hawk, Excalibur, and DeWalt, has rods in the upper and lower arms that are "pushed" by the motor to move short (about 4 inches 100 millimetres long) articulated arms which hold the blade.The rigid arm scroll saw was popular until the 1970s but is no longer made.It has a single-piece cast iron frame. The blade is attached to a pitman arm on the bottom, which pulls the blade down. A spring in the upper arm pulls the blade back up again. This design has a significant weakness in that the tension on the blade changes with every stroke; modern scroll sawsare all "constant tension" designs.

Hand-operated scroll saw, around 1900

BladesWith the exception of blades made for very light duty saws, typical scroll saw blades are five inches long. The major types are:

Skip tooth (or single skip tooth) which have a tooth, a gap, and then

another tooth; Double skip tooth (two teeth, a gap, then two teeth); Crown or two-way, which have teeth facing both up and down so that the

blade cuts on both the down-stroke (as with all other blades) and the up-stroke;

Spiral blades, which are essentially regular flat blades with a twist,so that teeth project on all sides;

Metal cutting blades made of hardened steel; Diamond blades (wires coated with diamond fragments), for cutting

glass. Blades come in many weights, ranging from #10/0 (for making jewelry - aboutthe size of a coarse hair) to #12, which is similar to a small band saw blade.Another variation is called a reverse tooth blade. On reverse tooth blades,the bottom 3/4" of the teeth are reversed (point up). This arrangement helps to reduce splintering on the bottom edges of the cut. However, it does not clear sawdust out of the cut as well as a regular blade, so cutting is slower and produces more heat. This heat reduces blade life and makes scorching of the workpiece more likely. Reverse tooth blades are especially useful when cutting softwood and plywood such as Baltic birch.The latest variation is called "ultra-reverse". These blades are configuredwith 4-5 teeth down and then one up and is repeated through the length of the blade. The blade clears dust very well and leaves a much cleaner back (very few "fuzzies"). These blades sizes range from #1 through #9.

BrandsSizeUsesMode of operationBlades