the slurry pump program€¦ · the shaft seal could use the packing seal, centrifugal seal and...

The slurry pump program

2 Slurry pump program

Safe pump slurry pump ranges We are professional slurry pump manufactory with since 1990. We providekinds of centrifugal slurry pump for mining, metallurgy, power plant and many industry area. Our slurry pump are completely equal to World famousbrand, all the spare parts are interchangeable and with good price.

A step was taken to better serve the market with state-of-the-art slurry pumps and a totally new range of horizontal and vertical slurry pumps has since been launched.

The series of Safe Pumphorizontal slurry pumps

Series GAH baseTransporting the strong abrasive slurry with high concentration ph 5-12

Typical applications• Mining and mineral processing

• Extra heavy duty highly abrasive slurries

• Cyclone feed

• Mine refuse and tailings

• Industrial processing

• Mill discharge

• Sand and gravel

• Medium duty abrasive slurries

• In plant slurry transfer pumps

Series GAHR baseTransporting the abrasive corrosive slurry with high concentration rubber lined

metal lined

Series GHH baseDelivering the abrasive slurry to reach the high head ph 5-12 metal lined

Series GM baseDelivering the slurry with middle concentration ph 5-12 metal lined

Series GG(H) baseTransporting the sand and pebbles or applied with big capacity with high headand single casing constructure

Series GSP baseDelivering the slurry from the pond, being installed vertically, working under the slurry

Series GSPR baseDelivering the slurry from the pond, being installed vertically, working under the slurry

Series GAF basehandle the foam and forth in slurry


Series GL baseDelivering the slurry with middle concentration ph 5-12 metal lined

Series GWn baseTransporting the mud and slurry

The frame plate liners for GAH series pumps have replaceable wear-resistant metal liners. The impellers are made of wear- resistant metal.The frame plate liner and impeller for GAH pumpare adoptable of hard metal only.

Bearing assembly assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. are adoptable of hard metal only. which helps adjust the space

between impeller and cover plate liner easily, and being removedcompletely when being repaired. Bearing use grease lubrication.The shaft seal could use the packing seal, centrifugal seal and mechanical seal.

The discharge side can be positioned at intervals of 45 degrees by request and oriented to any eight directions to suit installationshere are the drive types, include V belt drive, gear reducer drive,fluid coupling drive, and frequency conversion drive devices.Wide performance, good npsh and high efficiency, the pump of this type may be installed in multistage series to meet the deliveryfor long distance.

The type of GAH pumps are using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industry departments etc.


GAH SERIES SLURRY PUMP

Introduction Application

GAH1.5/ 1BG-GX brand

1.5-suction size(inch)

1-Discharge size (inch)

B-Frame type with maximum power

Pump

Model

Allowable

Max.

Power

(kw)

Clear Water Performance

Capacity Q Head

H (m)

Speed

n(r/min)

Max.Eff.

η%

NPSH

(m)

Impeller

Dia.(mm)m3/h l/s

GAH1.5/1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152

GAH2/1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184

GAH3/2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214

GAH4/3C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245

GAH4/3D 60

GAH6/4D 60 162-360 45-100 12-56 800-1550 65 5-8 365

GAH6/4E 120

GAH8/6E 120 360-828 100-230 10-61 500-1140 72 2-9 510

GAHR8/6 300

GAH10/8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686

GAH12/10ST 560 936-1980 260-550 7-68 300-800 82 6 762

GAH14/12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965

GAH16/14TU 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067

Note:

1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity at highest efficiency point).

2. NPSH: appropriate to point Q recommended at highest speed.

GAH SERIES SPECIALFICATIONS

Model meaning


The frame plate liners for GAHR series pumps have replaceable wear-resistant rubber liners. The impellers are made of kinds of rubber liners. include nature rubber liners and so on.

GAHR series have the same constructure with G series.

for long distance.

The type of GAHR pumps are used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industry departments etc.

It is specially suitable for the corrosive slurry. In some ore dressing, bigger GAHR series pump aslo would be used to transport the fine ore or taillings with weak abrasion



GAHR SERIES SlURRY PUMP

Pump

Model

Allowable

Max. Power

(kw)


Capacity Q Head

H (m)

Speed

n(r/min)

Max.Eff.

η%

NPSH

(m)

Impeller

Dia.(mm)m3/h l/s

GAHR1.5/1B 15 10.8-25.2 3-7 7-52 1400-3400 35

GAHR2/1.5B 15 25.2-54 7-15 5.5-41 1000-2600 50 2.5-5 178

GAHR3/2C 30 36-75.6 10-21 13-39 1300-2100

2-4 213

GAHR4/3C 30 79.2-180 22-50 5-34.5 800-1800 59 3-5 245

GAHR4/3D 60

GAHR6/4D 60 144-324 40-90 12-45 800-1350 65 3-5 365

GAHR6/4E 120

GAHR8/6E 120 324-720 90-200 7-49 400-1000 65 5-10 510

GAHR8/6R 300

GAHR10/8ST 560 540-1188 150-330 12-50 400-750 75 4-12

GAHR12/10ST 560 720-1620 200-450 7-45 300-650 80 2.5-7.5

GAHR14/12ST 560 1152-2520 320-700 13-14 300-500 79 3-8

GAHR16/14TU 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067

GAHR1.5/ 1BG-GX brand

1.5-suction size(inch)


B-Frame type with maximum power

Model meaning

R-Rubber lined


GAHR SERIES SPECIALFICATIONS

70

65

60

55

50

45

40

35

30

25

20

15

10

5

0 3 4 5 6 8 10 20 30 40 50 70 100 150 200 300 400 500 700 1000 1500 2000

Tota

l Hea

d (m

)

Volumetric Flow Rate (L/sec)

1.5x1

2x1.5

3x2

4x3

6x48x6

10x812x10

14x12

16x14

20x18

USGPM 50 100 150 200 300 500 1000 2000 3000 5000 10000 20000 30000

220

200

180

160

140

120

100

80

60

40

20

0

Tota

l Hea

d (ft

)

3 4 5 6 8 10 20 30 40 50 70 100 150 200 300 400 500 700 1000 1500 2000

80

75

70

65

60

55

50

45

40

35

30

25

20

15

10

5

0

Tota

l Hea

d (m

)


1.5x1

2x1.5

3x2

4x3

6x48x6

10x8

20x18

12x10 14x12

16x14

USGPM 50 100 150 200 300 500 1000 2000 3000 5000 10000 20000 30000

260

240

220

200

180

160

140

120

100

80

60

40

20

0

T ota

l Hea

d (ft

)

Performance curves are for clean, cold water only. Contact us to discuss pump selections for specific applications.

GAHR RUBBER LINED PUMPS

GAH METAL LINED PUMPS


GHH HIGH HEAD SlURRY PUMP

The GHH slurry pump are cantilevered, horizontal, centrifugal slurry pumps. The frame plate liner and impeller for GHH series pump are made of

They are designed for the handling of high abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry.

The pump of this type may also be installed in multistage series.


wear-resistant metal. The shaft seal for the GHH series may choose gland seal or expeller seal.

The discharge branch can be oriented to any of the eight directions to suit installations and Applications.

Pump

Model

Allowable

Max. Power

(kw)


Capacity Q Head

H (m)

Speed

n(r/min)

Max. Eff.

η%

NPSH

(m)

Impeller Dia.

(mm) m3/h l/s

GHH1.5/1C 30 16.2-34.2 4.5-9.5 25-92 1400-2200 20 2-5.5 330

GHH3/2D 60 68.4-137 19-38 25-87 850-1400 47 3-7.5 457

GHH4/3E 120 126-252 35-70 12-97 600-1400 50 2-5 508

GHH6/4F 260 324-720 90-200 30-118 600-1000 64 3-8 711

GHH6S 560 468-1008 130-280 20-94 500-1000 65 4-12 711

GHH1.5/ 1CModel meaning


G-GX brand1.5-suction size(inch)1-Discharge size (inch) C-Frame type with maximum power

h-high head

3 4 5 6 8 10 20 30 40 50 70 100 150 200 300 400 500

130

120

110

100

90

80

70 60

50

40

30

20

10

0

T ota

l Hea

d (m

)


1.5x13x2

4x3

6x4

8x6

USGPM 50 100 150 200 300 500 1000 2000 3000 5000 7000

420400380360340320300280260240220200180160140120100806040200

Tota

l Hea

d (ft

)

GAH SERIES HIGH HEAD PUMPS


Pump

Model

Allowable

Max.Power

(kw)


Capacity Q Head

H (m)

Speed

n(r/min)

Max.Eff.

η%

NPSH

(m)

Impeller Dia.

(mm) m3/h l/s

GM10/8E 120 540-1440 150-400 14-60 600-1000 73 4-10 549

GM10/8R 300

8-

GM SERIES SLURRY PUMP

GM series slurry pump are cantilevered, horizontal, centrifugal slurry pumps. GM series pumps are adopted high speed operating so they have small

They are suitable for delivering middle abrasive, middle-density slurries for metallurgical,mining, coal and building material departments. The shaftseal is adopeted both gland seal and centrifugal seal.


volumes saving floor area. The discharge positionby request may be rotated eight different anglesat internal of 45 degrees for installation and application

G-GX brand10-suction size(inch) Discharge size (inch) E-Frame type with maximum power

Model meaning

M-middle concentration

GM10/8E


GL(R) series slurry pump are cantilevered, horizontal, centrifugal slurry pumps. GM series pumps are adopted high speed operating so they have small

They are suitable for delivering low abrasive, low-density slurries for metallurgical,mining, coal and building material departments. The shaftseal is adopeted both gland seal and centrifugal seal.


volumes saving floor area. The frame plates havechangeable, wear-resistant, metal liners or rubberliners and the impellers are made of wear resistant

metal or rubber( rubber for frame plates, impellersof pumps with discharge Dia.(mm) above 550mm)The discharge position by request may be rotatedeight different angles at internal of 45 degrees forinstallations and application.


GL(R) SERIES SLURRY PUMP

Pump

Model

Allowable

Max. Power

(kw)


Capacity Q Head

H (m)

Speed

n(r/min)

Max. Eff.

η% NPSH

(m)

Impeller Dia.

(mm) m3/h l/s

GL-20A 7.5 1.8-9 0.5-2.5 7-35.5 1400-3000 40 2.5-3 152

GL-50B 15 11.5-65 3.2-18 8.5-46 1400-2800 62 2.5-5.5 190

GLR-50B 15 9-61 2.5-17 3-32.4 1200-2600 48 2.75-4.5 190

GL-75C 30 21.6-137 6-38 7-46.4 900-2400 57 3-6 229

GLR-75C 30 28.8-155 8-43 9-43 1100-2300 60 3-5 229

GL-100D 60 46.8-324 13-90 7-48.3 800-1800 64 2.5-6 305

GLR-100D 60 54-288 15-80 12-38 800-1600 65 2.5-5.5 305

GL-150E 120 126-569 35-158 11-52 800-1500 60 2.5-6 381

GLR-150E 120 72-576 20-160 4-38 800-1300 65 2.5-5.5 381

GL-200E 120 72-1080 20-300 8-45 500-1100 74 3-6 457

GL-250E 120 144-1800 40-500 6-48 500-1000 73 3-10 550

GL-300S 560 568-2538 130-705 8-60 400-950 79 2-10 653

GLR-300S 560 432-1900 120-528 7-41 400-800 81 3-8 653

GL-350S 560 650-2800 180-780 10-59 400-840 81 3-10 736

GLR-350S 560 720-2844 200-790 10-41 400-700 86 3-7 736

GL-400S 560 756-3312 210-920 7-37.5 300-600 85 2-8 825

GLR-400S 560 720-3312 200-920 7-51 300-700 80 2-10 825

GL-450ST 560 1080-4356 300-1210 9-40 300-550 87 3-10 933

GLR-450ST 560 1008-4356 280-1210 9-48 300-600 80 2-9 933

GLM-550TU 1200 1980-7920 560-2200 10-50 250-475 86 4-10 1213

Note:

1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity at highest efficiency point).

2. NPSH: appropriate to point Q recommended at highest speed.

G-GX brand

20-Discharge size (inch) C-Frame type with maximum power

Model meaning

L-low concentrationGL(R)-20A

R-Rubber lined


GL(R) SLURRY PUMP SPECIFICATIONS

GG(H) series gravel pump are horizontal and siglecasing centrifugal pumps. GG(H) series pumps are of high-head ones. Construction of this pump is

Gravel pumps are designed for continuouslyhandling the most difficult higher abrasive slurries, which contain large particles, to be pumped by common pumps. They are suitable


of single casing conected by means of clamp bandsand wet-passage. The wet-parts are made of ni-hardand high chrome wear resistant alloys.The discharge

direction of pump can be oriented in ant direction of360 degree. This type if pump owns the advantagesof easy installation, good performance of npsh andwear-resistance.

for delivering slurries in mining, explosive-sludgein metal melting, dredging in dredger and courseof the rivers, and other fields.


GG(H) SERIES SAND(GRAVEL) PUMPS

Pump

Model

Allowable

Max. Power

(kw)


Capacity Q Head

H (m)

Speed

n(r/min)

Max.Eff.

η%

NPSH

(m)

Impeller

Dia.(mm)m3/h l/s

GG6/4D 60 36-250 10-70 5-52 600-1400 58 2.5-3.5 378

GG8/6E 120 126-576 35-160 6-45 800-1400 60 3-4.5 378

GG10/8S(F) 560 216-936 60-260 8-52 500-1000 65 3-7.5 533

GG10/8S 560 180-1440 50-400 24-80 500-950 72 2.5-5 711

GG12/10G 600 360-1440 100-400 10-60 400-850 65 1.5-4.5 667

GG12/10TU 1200 288-2808 80-780 16-80 350-700 73 2-10 950

GG14/12TU 1200 576-3024 160-840 8-70 300-700 68 2-8 864

GG16/14G 600 720-3600 200-1000 18-44 300-500 70 3-9 1016

GG16/14TU 1200 324-3600 90-1000 26-70 300-500 72 3-6 1270

GG18/16TU 1200 720-4320 200-1200 12-48 250-500 72 3-6 1067

G-GX brand

6-Suction size (inch) D-Frame type with maximum power

Model meaning

G-sand(gravel)h-high head

GG(H)6/4D



GG(H) SAND PUMP SPECIFICATIONS

GSP(R) series submersible slurryl pump are vertical, centrifugal slurry pumps. submerged in sump towork. These pumps have no need of any shaft seal

They are designed for delivering abrasive,largeparticle and high-density slurries and appliedover the fields such as metallurgy, mining, coal, power, building materials, and environmental


and sealing water. They can also be operated forinsufficient suction duties.

protection.

GSP(R) pump casing are made of wear-resistant metal and the impellers are made of wearablerubber or poyure. According to liquid surface ofthe slurry pool, the pump transmission shaft andsuction pipe could be chosen. The pump couldoperate under the best condition with differentspeed.


GSP(R) SUBMERSIBLE SLURRY PUMPS

Pump

Model

Allowable

Max. Power

(kw)


Capacity Q Head

H (m)

Speed

n(r/min)

Max.Eff.

η%

Impeller

Dia.(mm)m3/h l/s

GSP(R)-40P 15 17-43.2 4.7-12 4-28.5 1000-2200 40 188

GSP(R)-65Q 30 18-114 5-32 5-31.5 750-1500 60 280

GSP(R)-100R 75 54-289 15-80 5-36 500-1200 62 370

GSP(R)-150S 110 108-479 30-133 8.5-40 500-1000 52 450

GSP(R)-200S 110 189-891 52.5-247.5 6.5-37 400-850 64 520

GSP(R)-250T 200 360-1152 100-320 7-33 400-750 60 575

GSP(R)-300T 200 540-1548 150-430 5.5-26 350-700 60 580

G-GX brand

65-Discharge size (mm) -Frame type with maximum power

Model meaning

SP-verticle type(submersible type)R-rubber lined

GSP(R)-65Q

Q


GSP(R) SPECIFICATIONS

GAF SERIES FROTH PUMP

It can be widely used in metallurgical industrial,miningsector, coal ore and chemical engineering to handle

AF pump can effectively eliminate foam and forth inabrasive and corrosive slurries with forth. when operated,

Introduction

Application

slurry and will also function properly even with


Bearing assembly- Bearing assembly of AF series is the

same with that of SV , SVR series . Bearing housing is

installed with motor frame base or supporting plate ,i.e.

pump and moto are connected either directly with

couping or through pulley and belt . Pulleys can beexchanged conveniently to adjust the pump rotating speed to satisfy the varying operating condition.

Feeding tank- Feeding tank can be steel,stainless steelor coated with rubber with overflow box and tangential

inlet .The former can transmit the excessive incoming slurry back to its pit, while the latter will allow the slurryquickly get into the pump body and make part of the foams disappear.

inadequate feeding slurry , thus making them the idealchoice for delivering foam slurries, esp, in flotation process.

Gzj series slurry pump

With the development of the technology, we introduced the series Gzj slurry pump under the theory of modernfluid mechanics, based on the software design and practical

Gzj series slurry pump are widely used in powerplant, metallurgical, mining, coal, etc. Which are

with maximum concentrations of wt.45%(ash)andsuitable for handling abrasive and corrosive slurries


experiences. The Gzj series slurry pumps are designed as single-stage, single-suction centrifugal pumps. They are wt.60%(ore) such as the fine ore and tailings in miningclassified into the horizontal type(Gzj type) and vertical type(Gzjv type) according to construction. The pumps are

removing ash in power plant and delivering coal tailingsThe pumps can be operated in series according to special requirements.With the development of the technology, we introduced

the series Gzj slurry pump under the theory of modernfluid mechanics, based on the software design and practicalexperiences. The Gzj series slurry pumps are designed as single-stage, single-suction centrifugal pumps. They are classified into the horizontal type(Gzj type) and vertical type(Gzjv type) according to construction. The pumps are innovative in both hydraulic and structural design. The wet parts are madeof energy-saving, high efficiency, little vibration, low noise,long service, light weight, reliable operation, easy maintenance


Pump Model

Allowable

Max. Power

(kw)

Clear Water Performance Max. Dia.

of Particle

(mm) Capacity Q Head H Speed

n(r/min)

Max. Eff.

η%

NPSH

(m) m3/h m

GZJ300－A100 450 464～1826 15.3～65.2 300～590 81.1 3 88

GZJ300－A95 400 441～1735 13.8～58.8 300～590 78.1 3 88

GZJ300－A90 560 505～1844 21.2～79.9 400～730 82.8 3.9 85

GZJ300－A85 450 477～1742 18.9～71.3 400～730 79.8 3.8 85

GZJ300－A70 630 635～2333 16.0～76.8 490～980 80.4 3.9 92

GZJ300－A65 500 589～2166 13.8～66.2 490～980 77.4 3.7 92

GZJ300－A56 250 395～1568 9.7～46.0 490～980 80.9 3.5 96

GZJ250－A103 560 402～1573 29.7～110.5 400～730 74.5 2.8 69

GZJ250－A96 560 403～1466 25.4～93.7 400～730 77.8 3.5 69

GZJ250－A90 450 378～1374 22.3～82.4 400～730 73.8 3.4 69

GZJ250－A85 800 376～1504 30.1～128.7 490～980 76.5 3.5 76

GZJ250－A83 800 367～1469 28.7～122.7 490～980 75.5 3.5 76

GZJ250－A80 710 354～1416 26.7～114.0 490～980 73.5 3.4 76

GZJ250－A78 630 415～1796 21.1～102.5 490～980 71.5 3.2 76

GZJ250－A75 560 300～1480 20.8～97.5 490～980 77.5 3 72

GZJ250－A73 500 292～1441 19.7～92.4 490～980 76.5 3 72

GZJ250－A70 450 280～1381 18.1～84.9 490～980 74.5 2.9 72

GZJ250－A68 450 272～1342 17.1～80.1 490～980 73.5 2.7 72

GZJ250－A65 315 299～1249 15.4～71.0 490～980 76.9 3 72

GZJ250－A63 315 290～1211 14.4～66.7 490～980 75.9 3 72

GZJ250－A60 280 276～1153 13.1～60.5 490～980 73.9 2.8 72

G-GX brand

100-the diameter of the impeller, centimeter

Model meaning

zj-slurryGZJ300-A100

V-verticalA-5 B-4 C-3 (The number of the vanes of the impeller) 300-discharge size(mm)

Gzj series slurry pump specifications(1)


Pump Model

Allowable

Max. Power

(kw)


of Particle


n(r/min)

Max. Eff.

η%

NPSH

(m) m3/h m

GZJ200－A85 560 221～907 32.0～133.7 490～980 70.5 2.8 54

GZJ200－A75 355 225～900 22.8～102.9 490～980 74.1 3 56

GZJ200－A73 355 219～876 21.6～97.5 490～980 73.1 3 56

GZJ200－A70 315 205～976 19.4～86.4 490～980 75.6 2.8 56

GZJ200－A68 315 199～948 18.3～81.5 490～980 74.6 2.8 56

GZJ200－A65 250 235～950 16.4～72.0 490～980 79.6 2.5 62

GZJ200－A63 250 228～921 15.4～67.6 490～980 78.6 2.5 62

GZJ200－A60 185 218～870 13.9～62.0 490～980 83.5 2.5 62

GZJ200－A58 185 211～841 13.0～57.9 490～980 82.5 2.5 62

GZJ150－A70 185 93～401 20.0～91.2 490～980 62.3 2 37

GZJ150－A65 200 150～600 17.4～75.7 490～980 70.8 2.5 48

GZJ150－A63 185 146～582 16.3～71.1 490～980 69.8 2.5 48

GZJ150－A60 160 135～550 14.7～63.5 490～980 75.9 2.5 48

GZJ150－A58 132 131～532 13.7～59.3 490～980 74.9 2.5 48

GZJ150－A55 110 124～504 12.3～53.4 490～980 72.9 2.3 48

GZJ150－C58 160 134～596 12.8～61.0 490～980 69.1 2 75

GZJ150－A57 110 95～427 13.2～56.3 490～980 67.8 1.8 32

GZJ150－A50 75 115～460 9.5～43.1 490～980 76.8 2.5 48

GZJ150－A48 75 111～442 8.7～39.7 490～980 75.8 2.5 48

GZJ150－C42 132 142～550 12.1～62.8 700～1480 77.1 2.2 69

GZJ100－A50 160 85～360 20.5～100.2 700～1480 69.6 2.5 34

GZJ100－A46 132 79～331 17.3～84.8 700～1480 67.6 2.3 34

GZJ100－A42 90 66～275 14.7～70.8 700～1480 71 2.5 35

GZJ100－A39 75 61～255 12.6～61.0 700～1480 69 2.4 35

GZJ100－B42 75 83～365 12.7～66.8 700～1480 63.2 2.5 18

GZJ100－A36 55 61～245 9.7～49.5 700～1480 71.6 2 32

GZJ100－A33 45 56～225 8.2～41.6 700～1480 69.6 1.8 32

G-GX brand


Model meaning





Pump Model

Allowable

Max. Power

(kw)


of Particle


n(r/min)

Max. Eff.

η%

NPSH

(m) m3/h m

GZJ80－A52 160 51～242 22.1～109.8 700～1480 56.3 2.1 21

GZJ80－A42 75 61～204 14.4～70.4 700～1480 66.7 2.5 24

GZJ80－A39 55 57～189 12.4～60.7 700～1480 64.7 2.4 24

GZJ80－A36 45 46～190 9.6～51.4 700～1480 67.7 2.5 24

GZJ80－A33 37 43～174 8.0～43.2 700～1480 65.7 2.3 24

GZJ65－A30 15 23～79 7.4～34.8 700～1460 63.5 2 19

GZJ65－A27 11 20～71 6.0～28.2 700～1460 61.5 1.8 19

GZJ50－A50 90 27～111 22.3～110.7 700～1480 45.1 3 13

GZJ50－A46 55 23～94 17.9～85.8 700～1480 44.7 1.4 14

GZJ50－A33 18.5 12～54 7.7～42.5 700～1480 42.1 2.9 13

GZJ40－A17 7.5 4～23 9.0～44.6 1400～2900 52.4 2.5 11

GZJV150－A35 37 99～364 3.0～17.9 490～980 69

15

GZJV100－A34 45 74～293 5.5～36.8 700～1480 65.8

14

GZJV80－A36 45 50～201 7.3～45.5 700～1480 58.2

12

GZJV65－A30 18.5 18～98 5.9～34.7 700～1470 53.7

8

GZJV50－A20 4 8～38 1.4～10.7 700～1440 38.6

10

G-GX brand


Model meaning





Leading quality interchangeable spare parts


Bearing Shaft Shaft Sleeve Bolts And Nuts Stuffing Box

Cover

usTIMKEN brand

bearing

Material:

ASTM 5140

Material:

SS304

Zinc plated,

anti-corrosive，easy for replacing the

parts

We have stuffing

box cover

Competiter A

Normal quality

bearing

Material:

40# steel

Material:

Good quality

cast iron

Normal quality Do not have

Competiter B

Normal quality

bearing

Material:

steel

Material:

Normal quality

cast iron


Competiter C

Less quality

bearing

Material:

Other material

Material:

Less quality cast

iron


Why high quality, Why we are supplier of world top500


www.safe-pump.comE-mail:[email protected]

Safe Pump, South Industry Park, Baoding city, Hebei province, China

tel:+86 312 6770 107

fax:+86 312 2039 533

the slurry pump program€¦ · the shaft seal could use the packing seal, centrifugal seal and...

Documents