the sunroof plus - eclipse awning
TRANSCRIPT
The SunRoof Plus
Product Details and Technical Specs
Commercial/Residential
Can cantilever up to 3’ past front mounting point
Official Class II wind resistance
Motorized, push button operation by
Retractable Fabric Cover: 100% acrylicfabric or flame retardant fabrics as required
Powder coated frame finish in White, Camel and Brown
Ideal for outdoor seating areas providing protection from sun and light rain
Wall mounted with support legs or fully supported on an existing structure
Can be produced up to 19’8” wide x 13’0” projection -or- 13’0” wide x 19’8” projection
The Eclipse SunRoof Plus is a retractable motorized shading system, with a long projection, providing 3-Season
protection from the elements. This system is designed for windy areas and will provide protection from rain when properly
installed with the light rain package.
The Sunroof Plus is available in two varieties; patio style is designed to attach to an existing structure and pergola style is engineered to be mounted on an existing structure. Both versions of this innovative shading system can be operated with a
wireless wall switch or a handheld transmitter. When not in use, it can be safely retracted.
Frame: 10 Years*
Fabric: 10 Years*
Motor/Electronics: 5 Years*
WARRANTY INFORMATION
UNIT PROFILE VIEWS
HARDWARE COLOR OPTIONS
WHITERAL 9016
CAMELRAL 1019 Eclipse Unique Color
BROWN
AVAILABLE: AVAILABLE:
PLUS
PLATINUMP R OT E C T I O N
PLATINUMP R OT E C T I O N
Ver
sio
n A
Ver
sio
n B
REQUIREMENTS FOR USE IN RAIN
Minimum pitch requirements PLUS
9’0” projection: 21” OF PITCH
32” OF PITCH
38” OF PITCH
46” OF PITCH
13’0” projection:
16’6” projection:
19’8” projection:Must also have fabric
mesh front section
Or Voids Warranty
Total Unit WidthDescription:
Description:
Eclipse SunRoof Plus version BRetractable Roof System
Eclipse SunRoof Plus version ARetractable Roof System
Sun Protection ONLY with less than 15 degrees of pitch
Sun Protection ONLY with lessthan 15 degrees of pitch
Purpose:
Purpose:
4”
2” 2”
2”4”
4”
”
Total Unit WidthTotal Unit Projection
Rail PlacementUp to total width - 6’
93 4
2”
4”
6”
6”
10”
10”
12”
”93 4
Total Unit Projection2”
*To the original purchaser Includes lifetime on fabric & motor*
VERSION ‘A’ MEASUREMENTS
11” from the Top of the Cassette box to the bottom of the Installation Bracket
11” from the mounting surface to the leading edge of the Front Bar (when fully retracted)
10” from the Top of the Support Post to the Bottom of the Guide Rail
7’6” Height of the standard length Support Post
4” Height of the Guide Rail
4” post Mounting Base (included in the overallSupport Post height)
A:
B:
C:
D:
E:
F:
IDEAL PITCH: (Bottom of “A” to the bottom of “E”) A 3 on 12 pitch (15 degree). So for every foot of projection you should have 3” of drop.
WALL & FLAT MOUNT BRACKET DETAILS
Wall Mounted - Mounts to existing wall and uses the provided post
Flat Mounted - Mounts on top of existing structure
Version A
Version B
22
3
3
4
4
“
“
11 4
“
21 2
“
FRONT21 2
“
33 4
“
31 2
“
11 2
“
Bracket - Side ViewBracket - Front View
Bracket - Side ViewBracket - Front View
C
B
A
D
F
E
The SunRoof PlusV7.20
SPECIAL FEATURES
Eclipse SunRoof Plus Wall Bracket
Eclipse SunRoof Plus Post Mounting Base
Used on wall mounted:SunRoof Plus ONLY
Used on wall mounted:SunRoof Plus ONLY
Available in:White, Camel, and Brown
Available in:White, Camel, and Brown
Wall Bracket - Front ViewSUNROOF PLUS SUNROOF PLUS Post Mounting Base - Top View
Holes = Holes =x x
TOP
3 1
1 1
3 3
2 2
8 4
“ “
“ “
3 58 8
“ “
3
4 4
4
3
31
1
4
42
2
WIDE
DEEP
“
““
“
Center to Center
41
7
2
8“
“
in from edge
Suggested Hardware: 1/4” lag screws with washers - lengthdetermined based on installation surface. Fastening into sheathing or better.
*Shown with wall mount brackets
Version BVersion A
Mounts on top of existing structure
Mounts to existing wall and uses the provided post
WALL BRACKET & POST BASE DETAILS