SigmaLuminous, Inc. 36800 Plymouth Rd. Livonia, USA Phone +1(866) 755-3563 Page 1

http://www.SigmaLuminous.com

SIGMASMART IOT

The ultimate IoT LED controller

Applications

• IoT Indoor lighting, stand-alone zones

• IoT Indoor lighting, networked systems with sensor

data exchange.

• Fully integrated lighting systems with building

automation systems, industrial automation.

System Description

SIGMASMART IOT is an automation device capable of driv-

ing up to 12 LED circuits, up to 10 hard-wired sensors/

switches, and up to 15 EnOcean sensors/switches.

Wired network connectivity includes BACnet IP over twist-

ed pair wire. FIPS grade AES 256 encryption assures sys-

tem security. Encryption can be turned off in case of a re-

quirement to integrate with other BACnet IP system ven-

dors that don’t support encryption.

Wireless port includes connectivity with EnOcean stand-

ard devices, sensors, switches. EnOcean sensors require

no battery or power lines eliminating maintenance and

drastically reducing cost of installation.

Integrated watt meter reports energy usage including

Amps, Volts, Watts, Watt-Hours.

12 independent LED driver channels can be grouped for

scheduling purposes, sensor and switch assignments.

Dimming, motion sensors, light level sensors, and

scheduling are standard.

SIGMASMART IOT complies with Title-24.

Easy integration of color-tuning by grouping multiple

channels of the SIGMASMART IOT driver.

Large networks of SIGMASMART IOT devices can be installed by

connecting controllers to each other using standard twisted pair

cable. Sensor data can be shared between zones within each

controller and on the network.

SIGMASMART IOT when combined with Rhea HMI and Rhea Router

offers full automation capabilities including Web interface, trend-

ing, alarming, scheduling, and integration with other BAS and IoT

systems. AllJoyn and BACnet IP are the default protocols

with LonWorks and Modbus also supported.

Monitor

Trend

Alarm

Schedule

HMI BACnet IP

Front-End

BACnet IP / Ethernet

SIG-

SIG-

SIG-

Router

BACnet over

Twisted-Pair wire up to 4k ft.

CA

T-5

LED Fixture 1

LED Fixture 2 LED Fixture 12 …...

BAS system

IoT

cloud

RHEA

SigmaLuminous, Inc. 36800 Plymouth Rd. Livonia, USA Phone +1(866) 755-3563 Page 2

http://www.SigmaLuminous.com

SIGMASMART IOT

The ultimate IoT LED controller

SIGMASMART IOT Platform Mobile App

Mobile app provides graphical program-

ming interface for free programming of

the inputs , outputs, and the logic in

between the two. The app stores con-

figuration for multiple SIGMASMART

IOT controllers and arranges it into pro-

jects. Programs can be backed up and

sent for use in another project. The app

currently runs on full version of win-

dows desktops and tablets.

SIGMASMART IOT is a generic platform of 48V DC devices

designed for operation directly on resilient micro-grid. The

micro-grid is typically created by combining Photovoltaic

Arrays (solar panels) with battery bank and inverters. In-

verters may connect the micro-grid with house AC grid.

Some of the micro-grid benefits include:

• Resiliency by independence from utility grid and easy

battery bank and PV integration.

• Superior efficiency by avoiding multiple voltage

translations.

• Future proofing by investing in DC.

• Enlarged profits.

SIGMASMART IOT device can be powered directly from

mains by a 48V power supply (recommended Meanwell

HLG-600H-54) or be a part of micro-grid as depicted below:

48VDC SIGMASMART IOT DC

IT / Computers

Small Equipment

Design green with BLUEOCEAN

SIGMASMART

Battery Storage

Inverter/Charger

Renewable Energy

SigmaLuminous, Inc. 36800 Plymouth Rd. Livonia, USA Phone +1(866) 755-3563 Page 3

http://www.SigmaLuminous.com

SIGMASMART IOT

The ultimate IoT LED controller

EnOcean wireless Wired BACnet IP—Ethernet

EnOcean is a wireless sensor technology for the “last 50 feet”. By

the use of energy harvesting the need for power wiring or

batteries is removed practically eliminating sensor maintenance.

Supported and tested EnOcean profiles

• Light Sensors

• A5-06-01

• A5-06-02

• Occupancy Sensor

• A5-07-01

• A5-07-02

• A5-07-03

• A5-08-01

• A5-08-02

• RPS Switches and Key Card

Software features include:

• EnOcean packet monitoring with filtering and teach packet

recognition.

• Easy single click device registration.

• Offline device registration for engineered solutions.

• 902MHz frequency support in US markets.

• EnOcean Device heartbeat support with alarming.

• Standard ON/OFF or timed based switches (great for

dimming).

The use of EnOcean sensors requires separate purchase of

902MHz antenna. Antenna connects to the SIGMASMART IOT by

standard CAT-5 cable (straight-through). Max cable length is 250

feet.

Max distance between sensors and the antenna is 35ft indoors.

Longer distances can be achieved by careful planning of sensor

and antenna locations.

Please refer to EnOcean installation notes for more

info:

https://www.enocean.com/fileadmin/redaktion/

pdf/tec_docs/AN001_INSTALLATION_NOTES_Nov08_en.pdf

BACnet IP over Ethernet allows SIGMASMART IOT controller to be

used in networks of hundreds or thousands of IoT devices. Wired

backbone assures system stability and resiliency. Standard twisted

pair wire can be run from one controller to the next and so on.

SIGMASMART IOT pioneers device-level system security with FIPS

grade AES 256 encryption. Encryption can be turned off in case of a

requirement to integrate with other BACnet IP system vendors that

don’t support device-to-device encryption.

BACnet IP protocol standardizes communications and makes it

possible to integrate the SIGMASMART IOT platform with other

compliant networks. AllJoyn BACnet interface can be used to link

SIGMASMART IOT devices to IoT cloud. RHEA appliance can be used

for management of BACnet network, trend storage, data ana-

lytics, sensor data binding to other BACnet controllers, scheduling,

alarming, etc.

SigmaLuminous, Inc. 36800 Plymouth Rd. Livonia, USA Phone +1(866) 755-3563 Page 4

http://www.SigmaLuminous.com

SIGMASMART IOT

The ultimate IoT LED controller

I/O CONFIGURATION

Hardware Processor ARM M4 Cortex, 32bits, 168MHz

Memory 190k application memory

Transceiver FT-10 Twisted pair free topology

Indicators Multicolor LED, power, status

Comm Ports

FT-10 comm port, RJ45 port for

EnOcean connectivity

Power Supply Voltage 48VDC Nominal, 50V DC max

Supply Amperage 18A max

Output Amperage 1.5A per channel max. Class II

Enclosure Material ABS Color Black

Installation 35mm DIN

Connectors Removable

Environment Temperature 0°-49°C (32°-120°F)

Humidity 0-90% non-condensing Storage -20°- 70°C (-4° - 158°F)

10 x Universal Inputs All inputs have 12 bit resolution

Resistive Thermistor 10KΩ Type II and Type III

(Type II is recommended)

Potentiometer with custom scaling

Dry contact

Voltage 0-10V DC

1-5V DC

Current 0-20mA DC

4-20mA DC

12 x LED Drivers Dimmable by 0.1% increments

Rated at 1500mA Max, Class II

Wireless EnOcean 902MHz— with optional antenna

Sensors, switches

Wireless signal length max 35ft in-

doors

LED

Device status GREEN Pulsing green = Normal

Off = No power or other

fault

Service pin GREEN OFF = Normal, running

ON = No application

STATUS LIGHTS

NOTE: No Hardware Jumpers required to configure I/O

MECHANICAL

AGENCY APPROVALS

UL 916

UL 2108

CSA C22.2#205

CSA C22.2#9.0

WARRANTY Standard 5-year warranty, 7 and 10 year warranty available.

10 in

3.5

in

AUTOMATION PROTOCOLS

SUPORTED PROTOCOLS

BACnet IP, MODBUS TCP, LONWORK, IoT, EnOcean

RoHS

SigmaLuminous, Inc. 36800 Plymouth Rd. Livonia, USA Phone +1(866) 755-3563 Page 5

http://www.SigmaLuminous.com

SIGMASMART IOT

The ultimate IoT LED controller

INSTALATION

Q-BUS NETWORK WIRING

UNIVERSAL INPUT WIRING

SIGMASMART IOT controller must be installed into NEMA-

rated enclosure using DIN rail. Standard 35mm DIN rail (top

hat rail EN 50022 – 35 × 7.5mm) is used to speed up the

installation. Mount DIN rail onto enclosure’s backplate,

then snap-in the SIGMASMART IOT controller onto the DIN

rail. The red

clips on the back of the enclosure will latch onto the DIN

rail. To remove the controller, use thin screwdriver to gen-

tly pull out the clips while removing the enclosure from DIN

rail.

Use only low capacitance LEVEL IV, 22AWG, twisted pair for

network wiring. This wire type is sometimes called the

“Echelon wire”. Wire is available from many distributors i.e.

Windy City Wire and Cable. Part number 105500. Total net-

work wire length is not to exceed 1000ft. Network must be

terminated with one 50-OHM, 1/4-watt resistor, typically

located at the network interface (NI-FT) of the programma-

ble host. To avoid interference, the network wiring should

be installed at least 1/2 inch from other network and AC

power wiring.

UIs accept building automation standard signals 0-20mA, 0-10V, re-

sistive signals i.e. dry contact relay closure or a thermistor. Each

signal type requires different wiring method:

SigmaLuminous, Inc. 36800 Plymouth Rd. Livonia, USA Phone +1(866) 755-3563 Page 6

http://www.SigmaLuminous.com

SIGMASMART IOT

The ultimate IoT LED controller

UNIVERSAL INPUT WIRING— continued

LED OUTPUT WIRING

LED OUTPUT WIRING—continued

SIGMASMART IOT is to be used as an LED low voltage

lighting system and powered by a power supply listed by a

Nationally Recognized Testing Laboratory and for perma-

nent installation and use in location in accordance with

NEC, NFAP, Article 411.

LED Fixtures suitable for installation with the SIG-

MASMART IOT controller consist of an LED string (light

engine) and a connector that allows for direct wire connec-

tion from the LED string to one of the output channels on

the SIGMASMART IOT controller. Note that there is no LED

DRIVER in the lighting fixture as the SIGMASMART IOT con-

troller is the LED Driver with 12 output channels. Some LED

fixtures are tunable and feature cool and warm light LEDs.

In such case two output channels are used, one to drive

the cool LEDs and the other to drive the warm LEDs.