the versatility of versacryl
TRANSCRIPT
VersacrylA multiple use soft liner material
www.matrixdentallab.com
Laboratory Kit
Self cure or Heat cure Ratios
softness adjusted by hard-soft
liquid ratios
www.matrixdentallab.com
www.matrixdentallab.com
Treatment Provisionals
Two Styles
Claspless treatment
provisionals
Vacuum Form surgical
tray w/ VersacrylSelf cure resin w/
Versacryl
www.matrixdentallab.com
Conventional Self Cure
Style
Layered Versacryl
for undercut
retention and
Diamond D self
curing resin.
www.matrixdentallab.com
Conventional Self Cure
Style
Decide where to
place Versacryl.
Soak model.
www.matrixdentallab.com
hardener / softener liquids
larger undercuts, more softness
smaller undercuts, more hardener
www.matrixdentallab.com
Dedicate pipettes,
never use for any other
monomers
Engage undercuts
Versacryl should be
the consistency of
honey when
adapted to cast in
order to slightly run
and fill inter-
proximal areas.
www.matrixdentallab.com
Engage undercuts
Before it
stiffens, wet fingers
and lightly finger
adapt and mold to
model and into
undercuts.
www.matrixdentallab.com
Hard acrylic veneer
Prime Versacryl with hardener liquid and sprinkle adapt Diamond D self curing repair resin or preference self cure resin.
Make sure to cover Versacryl with an adequate thickness of self curing resin for strength
www.matrixdentallab.com
www.matrixdentallab.com
Cure
Warm water bath
105-110f
20-25 psi for 20
minutes
www.matrixdentallab.com
Final product
Dual lamination effect,
undercut retention
Newer Version
Thermal Formed
Treatment Provisional
Duplicate
master.
Remove palatal
area in
preparation for
thermoforming.
Before vacuum forming
In order the increase
the vacuum adaption
take a lathe mounted
fiber cutting disk and
cut 1mm channels or
grooves on the bottom
of the model. This will
allow vacuum to draw
around the periphery
of the model better.
www.matrixdentallab.com
Thank Dan for that tip!
www.matrixdentallab.com
Vacuum adapt surgical
tray material .100 or
.120 (polyesther
teraphalte)
Available from
Keystone Industries
www.matrixdentallab.com
Gross trim and mark
areas for shape and
Versacryl adaption
www.matrixdentallab.com
Scallop away areas
where Versacryl will
engage undercuts.
www.matrixdentallab.com
The strength of the P.E.T.
is throughout the appliance
www.matrixdentallab.com
www.matrixdentallab.com
Preparing P.E.T frame to accept
Versacryl
www.matrixdentallab.com
The amount of free standing Versacryl will also effect the amount of rigidity.
Always prime area accepting Versacrylwith hardner liquid just before adapting Versacryl to frame.
www.matrixdentallab.com
Select appropriate hardness
www.matrixdentallab.com
www.matrixdentallab.com
Wet finger adapted
www.matrixdentallab.com
www.matrixdentallab.com
Cure
Warm water bath
105-110f
20-25 psi for 20
minutes
Pumice and polish
www.matrixdentallab.com
www.matrixdentallab.com
Questions or Sample
1-800-333-3131
Ask for Carl
Specialization in removable prosthetics in the areas ofFabrication, education, and consultingThomas R Zaleske
219-310-8296 lab
630-531-8197 cell
www.matrixdentallab.com