PRODUCT INFORMATION

The WheelHorse

PRODUCT INFORMATION

The WheelHorse

- The versatile forest machine

Have You missed a machine for small scale forest work that are developed for accessibility,

capacity and usability?

We are extremely pleased to be able to present a revolutionary concept that involves an articulated

“thinning forwarder” that you can both go on and manage by the joystick you know from

IronHorse.

We have used well-tried technology solutions from Iron Horse and combined this with the need for

a new “thinning forwader” to the small-scale forestry. Just as the Iron Horse The Wheel Horse is a

complete system for forest, farm and transport in different terrain. Flexibility, strength, and low

ground pressure makes it an environmentally friendly alternative to heavier machines. The machine

is easy to operate and easy to get started and work with.

In comparison to the many ATV vehicles with trailers, this product is fully developed for practical

use in the forest and at the same time, it has properties that allow it to quickly run slightly longer

distances, due to its high speed gear.

MACHINE – THE WHEELHORSE

WheelHorse incl. 1,5 tons trailer

and radicontrolled crane with wire

Part No. 968 7450-20

The WheelHorse is equipped with the reliable Honda engine of 13 Hp

The vehicle is unique with its mechanical transmission and high- and

low gear. The hydraulic engagement on the trailer is easy to control

from the steering handle and the machine has 6 wheel traction, when

there are need extra power for pulling.

Dim (mm) w x h x I

Max load capacity

Transmission

Hydraulic

Total weight incl. trailer

Engine

Traction trailer

Max speed

Support legs

Length wire

1300x1990x4650

(*incl rollover bar)

1500 Kg

Variator/gearbox/Chain transmison

Double pump 1,9/3,8 cm3

1000 Kg

Honda air Cold 4-stroke OHV

Hydraulic transmission

15/6 km/h (gear high/low)

Mechanical

25 m

WheelHorse with T1700 4WD

crane with grip 330

Part. No. 968 7450-10

The WheelHorse is equipped with the reliable Honda engine of 13 Hp

The vehicle is unique with its mechanical transmission and high- and

low gear. The hydraulic engagement on the trailer is easy to control

from the steering handle and the machine has 6 wheel traction, when

there are need extra power for pulling. The trailer is equipped with a

powerful grip that have a big lift capacity comparing to it size.

Dim (mm) w x h x I

Max load capacity

Transmission

Hydraulic

Total weight incl. trailer

Engine

Traction trailer

Max speed

Cranes reach/lifting

capacity

Support legs

1300x1990x4650

(*incl rollover bar)

1500 Kg

Variator/gearbox/Chain transmison

Double pump 1,9/3,8 cm3

1000 Kg

Honda air Cold 4-stroke OHV

Hydraulic transmission

15/6 km/h (gear high/low)

3,3 m/150kg 1,2 350 Kg

Hydraulic

Length 25 m

WheelHorse with T1750 4WD

crane with grip 30-50

Part. No. 968 7450-30

The WheelHorse is equipped with the reliable Honda engine of 13 Hp

The vehicle is unique with its mechanical transmission and high- and

low gear. The hydraulic engagement on the trailer is easy to control

from the steering handle and the machine has 6 wheel traction, when

there are need extra power for pulling. The trailer is equipped with a

powerful grip that have a big lift capacity comparing to it size.

Max load capacity 2000 Kg

Traction trailer Hydraulic transmission

Cranes reach/lifting capacity 3,5 m/240 Kg 1,2 600 Kg

Support legs Hydraulik

Crane 30-60 Extensionsbar 90 cm

Cranes reach/lifting capacity 4,4 m/160 Kg

ACCESSORIES WHEELHORSE

Dredger bucket DS55 Part. No. 531 0135-84

Dredger bucket is an accessory for the WheelHorse crane to be

attached where the grip is mounted.

It’s perfect to have when cleaning the ditches or other areas

combined with the dumper trailer. Also good to use when

transporting soil, gravel or stones.

Volume is 60 liter.

Dumper trailer FL250V Part. No. 531 0170-05

FL250V dumper trailer is adapted for tough handling, 3 mm

thick plate in the lower part and reinforced side flaps.

It’s equipped with double rear folded flaps. You can transport

soil, gravel, stones and equipment even people easily. The total

trailer is galvanized for optimal long life span.

Length:

Total height flaps:

Width:

225 cm

50 cm

122 cm

Bracket for Gasoline can 10L

Part. No. 531 0170-14 Practical bracket for gasoline can.

Hydraulic winch, radio controlled Part no. 531 0170-00

RC Hydraulic winch HV500 is a reliable and proven construction. The

winch kit is complete with also radio controlled box, wire, hock, hoses,

and electrical controlled hydraulic valve.

Weight

Speed

Oil pressure

Maximum pull strength

Rec. Oil flow

Radio controlled

Wire/thickness

Range RC

Wire length

11 Kg

30 m/min

190 bar

500 Kg

10-15 l/min

2 channels

5 mm

Ca 50 m

25 m

Snow chains Part No. 531 0170-12

With the snow chains attached on the front wheels, You get the

protection for preventing to slip.

Meassure 10.0/75-15,3

Snow blade Part No. 531 0170-20

Snow blade incl. the attachment rig is adapted to the

WheelHorse and is easily mounted onto the machine. The

attachment rig will be permanente attached to the machine, and

when You need the blade You easily attaché the blade to the rig

easily with 2 pins. It’s the same easy procedure when You are

disconnecting the blade from the machine.

Width

Height

182 cm

52 cm

Working lights LED 10-80V Part No. 531 0151-38

LED lights are low power and have high tolerate of vibration

and gives an terrific light. Every LED has it’s own reflektion

sektor.

Winch for snowblade

Part No. 531 0170-21

WARN RT25 winch has a well-tested technic, high quality

and modern engine which gives it a long life span with low

power consumption.

Top speed is 15 km/h, on high gear!

Lennartsfors AB Dealer

Lennartsfors 1

S-672 92 ÅRJÄNG

Tel. +46 (0)573-39200

Sweden

Website www.lennartsfors.com