thermal insulation solutions_a
TRANSCRIPT
April 12, 2023
Presentation on Thermal Insulation
PRS Solutions Private Limited. All rights reserved. April 12, 2023
April 12, 2023 2 PRS Solutions Private Limited. All rights reserved.
Sequence of Presentation
• Introduction of the company• Our thermal insulation range• PRSS – your right partner
2
April 12, 2023 3 PRS Permacel Private Limited. All rights reserved.
PRS Solutions Private Limited• Started business in the early
sixties as the `PERMACEL’ division of Johnson & Johnson.
• JNJ divested Permacel to PRS group in August 1999.
• PRSS started as an export arm for PRSP
• Largest, State of Art manufacturing facility in the industry in India.
April 12, 2023 4 PRS Solutions Private Limited. All rights reserved.
Our Manufacturing Facility
Our range of thermal insulation products
• Products– P-501 & P-501K– P-504T – P-538 / P-539HT : Gentherm &
Gentherm HT– P-520-20
Locogard
• A special fibre mat covered from top using special coated fabric & from other sides using high temperature resistant fabric.
• The assembly is duly stitched using high temperature resistant thread.
• Requisite fasteners are attached for ease of fixing.
• It is offered in kit form as per the drawings.
Salient Features
• Avg. Thickness (mm) 20 - 30
• Limiting oxygen index LOI > 50% as tested in accordance with IS:13501
• Flame Resistant: Passes Class ‘A’ as per Appendix 8 of UIC-564-2 OR
• Visibility Deterioration: Passes Class ‘A’ as per Appendix 15 of UIC-564-2 OR
• Toxicity < 0.2 Units as per NCD: 1409
• Insulation Property = 120 deg c Maximum*
* Temperature of cold face, when hot face temperature is 600 Degree C.
P-501K Locogard on Diesel Engine
Locogard
P504T- Salient Features
• A special fibre mat covered from all sides with an aluminised glass fabric and the duly sealed with an aluminised glass cloth tape.– Avg. Thickness (mm) 25 + 5– Insulation Property* ( O C) 70
Maximum* Temperature of cold face, when hot face temperature is 450
Degree C using one layer.
– Fire resistance Passes UL-94 test at V-0 level.
Gengard on Tube Mould
Tube Mould - Fully insulated
P504T
P-504T for plastic industry
April 12, 2023 12 PRS Solutions Private Limited. All rights reserved
P-504T for plastic industry
April 12, 2023 13 PRS Solutions Private Limited. All rights reserved
P-504T for pipe insulation
April 12, 2023 14 PRS Solutions Private Limited. All rights reserved.
P-504T for pipe insulation
April 12, 2023 15 PRS Solutions Private Limited. All rights reserved.
P-504T for turbine insulation
April 12, 2023 16 PRS Solutions Private Limited. All rights reserved.
P-538 HT- salient features
Gentherm Series P 538 A / P539
• A special fibre mat covered from bottom with high strength high temperature enduring fabric & from top with super soft low emissive aluminised reinforced high temperature enduring fabric.
– Avg. Thickness (mm) 50 + 5
– Insulation Property* ( OC) 60 Maximum
* Temperature of cold face, when hot face temperature is 450 Degree C
using one layer.
– Suitable for -30 to +530 OC Temperature Continuous
– Fire resistance Passes UL-94 test at V-0 level.
Insulation on DG Sets P-538 HT & P-504T
Insulation on DG Sets : 2000KVA P-539
Turbine Insulation - P539
12 April 2023 PRS Permacel Private Limited. All rights reserved. 20
P-520-20 salient features
Supertherm P 520-20
• A special insulation mat duly enveloped with high strength high temperature enduring fabric.
– Suitable for -30 to +650 OC Temperature
Continuous
– Fire resistance Passes UL-94 test at V-0 level
– Insulation effectiveness : surface temperature
expected at NMT(Not more than) 100°C with hot
objects at NMT 800°C at a distance of NLT(not
less than) 15”
April 12, 2023 21 PRS Solutions Private Limited. All rights reserved.
P-520-20 in a steel plant
April 12, 2023 22 PRS Solutions Private Limited. All rights reserved.
PRS Solutions – right partner• Oldest , trusted ,ethical and most
experienced company in this industry in India• Ability to provide END to END solutions • New state of the art manufacturing facility
with all the necessary approvals• Preferred thermal insulation material vendors
to DG set manufacturers, Tyre industry, Plastic industry, power plant’s(Nuclear also) in India
• DSIR approved R&D lab – only one in India• Excellent track record of innovations – with
over 25 patents• Privately held with the backing of a 150 year
business group backing
April 12, 2023 24 PRS Solutions Private Limited. All rights reserved.
Thank You