Special ized in Qual i ty – Since 1978

APS’s Coatings & Linings Division provides application of factory and site based specialist coatings and linings to the oil, gas, water and power industries.

The arc spray application of exotic metal coatings is rapidly becoming more and more popular world-wide for the long term protection of steel surfaces against extreme marine, high temperature and corrosive chemical environments, especially for areas where extended life to �rst maintenance is essential.

COATINGS & LININGS DIVISION

Features• Extreme Corrosion Resistance• Excellent Chemical Resistance• High Temperature Resistance• Extremely Durable – Extended Service Life

Applications• Splash Zone Area Jacket Legs/ Riser Pipe• Splash Zone Area Conductors/Clamps/Casing• External Steel Flare Booms • External Demethanizer Column • External Pipe Spools• External Structure Exposed to Marine Environments

Thermal Metal Spray Systems

Installation Guidance

equipment. All APS technicians are approved to ISO 14918 Standard for Applicators and re-tested every 6 months. An aluminium, zinc, monel, or other exotic metal wire, is fed into the arc spray unit, heated up to a molten substance then atomized and fused onto the surface. Once the metal spray is applied, the system is normally top coated with a sealer coat t res of the metallic spray. APS is the largest metal spray contractor in the Middle East.

APS is associated with some of the world’s leading manufacturers of high performance linings and coatings. Some typical examples of systems are listed below, though we are not limited to using only these systems, as in many cases

COATINGS & LININGS DIVISION

Milestone Projects Executed by APS:Project Name Client Project Description

Burj Al Arab GENREC TSA Coating Structural Steel

Burj Khalifa Evansendai. Co. TSA Coating Structural Steel

PDO TSA Lining of Internal Pipe Spools

GEAD/NEXAN Lamprell TSA Coating Process Platform and WHP

Dolwin II Dubai Dry Docks TSA Coating O shore Platform

For a detailed and full project reference list, please contact APS.

APS brings unrivalled levels of innovation, experience and expertise in corrosion engineering and contracting.

We have in-depth knowledge of the industry, our customers’ day-to-day challenges and the environmental, health and safety standards in the marketplace. By working in close partnership with our customers, our company is able to provide timely nt, cost-e ective and above all quality products and services.

Special ized in Qual i ty – Since 1978

Typical Metal Spray Systems Used:

Product name DFT System Temperature resistancet

Aluminium 250-500µm Up to 600 °C

Zinc 100-200µm Up to 500 °C

Monel / Hastalloy 250-500µm Up to 900 °C

siht fo stnetnoc eht morf devired eb nac sthgir oN ,gnitirw ni nopu deerga esiwrehto sselnU .noitacilbup

APS products, services and technical advice given are subject to general terms and conditions of Anticorrosion Protective Systems L.L.C. All rights reserved. All trademarks are the property of the respective owners.

APS Regional Headquarters South-East AsiaAnticorrosion Protective Systems (M) SDN BHDSuite 21- 01, Level 21, Menara BinjaiNo. 2, Jalan Binjai, 50450 Kuala Lumpur, MalaysiaTel: +603 2181 0955Fax: +603 2181 6955E-mail: sales@apsmsia.com.myWebsite: www.aps-corporate.com

Anticorrosion Protective Systems L.L.C.P.O. Box 8091, Dubai, United Arab EmiratesTel: +971 48848383Fax: +971 48848384E-mail: sales@apsdubai.comWebsite: www

roup HeadquartersAPS G

.aps-corporate.com