think ultrafast! | high q laser picotrain ic-10000 only oscillator (no mopa design) more...
TRANSCRIPT
Think Ultrafast! | High Q Laser
PicoTRAIN IC-10000
Only oscillator (no MOPA design) more simplicity and reliability
Dimensions: 480*200*101.6mm3 ongoing volume production
High stability for OEM integration: optimized misalignment sensitivity 50 g shock tested Finite element analysis (FEA)
optimized components and monolithic housing (see lower figure)
High Q patented resonator folding technique
Integrated pump module “de-rated pump” operation current
ca. 90% of nominal current Use of high purity surface
components Upper deck for optical cavity, lower
deck for electronics
Think Ultrafast! | High Q Laser
picoTRAIN IC-10000 – look inside – confidential
1. Massive monolithic aluminum housing machined from one block
2. No plastic, cables and electronics inside optical cavity (upper deck) no out gassing
3. External fast photo diode in blue end cap4. Optional: Electrical shutter for SH and IR in blue
end cap5. Optional: attenuator of SH and IR 6. Optical feed through for power measurement
SH and IR, input beam to lower deck7. Optional: sealed of SHG box8. Industrial mirror mounts FEA optimized with
minimized degrees of freedom 9. Laser crystal holder improved10.User replaceable diode pump module (URDM)11.Massive cooled optics mount with for
semiconductor saturable absorber mirror (SESAM)
12.Optional: Automatic constant power control with piezo actuators or manual alignment
Think Ultrafast! | High Q Laser
picoTRAIN IC-10000 – 3d view
Housing view from the rear with controller and water connections
Monolithic design for easy system integration
View into open lower deck showing electronics. Lower deck contains electronics, upper deck contains optical resonator
Think Ultrafast! | High Q Laser
picoTRAIN IC-10000 – benefits
Customer Benefits of picoTRAIN IC-10000
Scalable concept for future requirements of higher power or different parameters
Design goal: 12 months maintenance interval, 5 year life time
High temporal and spatial stability Long Mean Time Between Failure (MTBF) Ongoing volume production Easy service and maintenance Facilitated system integration
RS485 Bus GUI „all-in-one-electronics” 19” rack including chiller, 8 height units
extended functionality and operation safety
Think Ultrafast! | High Q Laser
picoEMERALD – all-in-one CARS source remote controlled, truly hands-
free one-box CARS light source two tunable ultrafast laser pulse
trains high power (typically 10W)
picosecond oscillator, a frequency doubling to 532 nm and a synchronously pumped OPO in a single housing
optical modules were optimized by finite element analyses and mechanical stability algorithms (misalignment stability optimization) to exhibit maximum passive stability
active resonator control of the high power picosecond oscillator and the OPO.
three fully automated temporally and spatially overlapping ultrafast pulse trains: 1064 nm out of the laser
oscillator 690 nm to 990 nm (signal range) 1150 nm to 2300 nm (idler
range)
Cooperation of High Q Laser and APE