this is nuuo io device. install io device io card capture card io box converter usb rs485 pci mpeg-4...
TRANSCRIPT
This is
NUUONUUOIO DeviceIO Device
Install IO Device
IO Card
Capture Card
IO BoxConverter
USB RS485 RS485
RS485PCI
PCI
MPEG-4 Series
H.264 Series
• Open Main Console > Config > Setting > I/O Device1. Module Setting• Enter Module name of device• Choose Device model
– Refer IO Box or IO Card
• Set COM Port of device– My computer > manage > Computer management
> Device Manage > Ports (COM & LTP)
– It’s will show Prolific USB-to-Serial Comm Port (COM3)
• Set ID of device– Right Check on Device and choose properties >
Port Setting > Check Bits per second (Baud Rate)
It will get Baud rate
– Use Tool “IOConfig.exe” to get ID information
– Input COM port, Baud rate, and set Starting address from “0”.
– And click “scan” to search.
– The Address “0” will show as below
Right Click
2. I/O Device List• Show device already installed in system• Choose device
3. Device Setting• Modify name• Set I/O state
– N/C : normal Close
– N/O : normal Open
4. Digital input Monitor• It will become red when
signal input
5. Digital output simulation• Click to send output signal• It will become red