1.Live

2.Guide

3. My Content

4. Settings

5. Features

6. Diagnostics

8

8

8

9

1112

14

8

7

This user's guide covers the installation Skyworth C3700 set-top box which includes step by

step configuration of all features available

Information captured in this document is subject to change. Skyworth reserves the right, to

carry out changes in the product design and specifications in line with engineering and

technology advancements.

Support for 7 days Electronic Program Guide (EPG)

256 colors on screen display

Channel editing function e.g. favorite , lock

Over The Air software upgrade

Support for PVR function

1. Read, follow and keep these instructions safely.

2. Heed all warnings.

1. Do not use this apparatus near water.

2. Clean only with dry cloth.

3. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

5. The parameter of the using power source should be accordance with that indicated on the

rear panel; otherwise the machine will work improperly and can be damaged.

6. Protect the power cord from being walked on or pinched, particularly at plug points,

convenience receptacles, and the point where they exit from the apparatus.

7. Only use attachments/accessories specified by the manufacturer.

8. To prolong the useful life of this machine, please do not keep pressing buttons for prolonged

periods.

9. Use only those parts specified by the manufacturer, or sold with the apparatus.

10. Unplug this apparatus during lightning storms or when unused for long periods of time.

11. Refer all servicing to qualified service personnel and authorised service centres. Servicing

is required when the apparatus has been damaged in any way, including damage to power-

supply cord or plug is damaged, liquid has been spilled or objects/liquid have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

12. Warning: This unit should only be serviced by an authorized and properly trained

technician or service centre. Opening the cover or other attempts by the user to service this

unit may result in serious injury or death from electrical shock, and may increase the risk of fire

and will void the warranty.

13. Please switch off the MAINS electricity before disconnecting the device.

14. The signal cable must be earthed to the system.

15. No naked flame sources, such as lighted candles, should be placed on or near the

apparatus.

Note: All the on-screen display messages and illustrations in this manual may be somewhat

different from those on the actual apparatus.

WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture. Apparatus must not be exposed to dripping or splashing. Ensure that it is not placed

under any objects filled with liquids, such as vases. Refer to the identification/rating label

located on the back panel of your product for its proper operating voltage.

Batteries must not be exposed to excessive heat such as direct sunlight, fire or other heat

source. For applicable power supply details, see information contained in this User Manual.

External Power supplyRCA cable

Packing items

OK/LIST

EPG

Surf up/down channel list

Adjust volume

To confirm the choice/List the channels

Switches back to previous channel or menu

CH+,CH-

BACK

Switch between TV and Radio mode

REC

VOL+,VOL-

LANG

Start program recording

Stop recording or play back of program recorded

Play or pause program recorded

Rewind or fast forward program recorded

Up, down, left, right button

HELP Display help and diagnostic information

VOD

VAS

GO TO Open the personal video recorder mode

Video on Demand service(reserved)

Next digital value-added service(reserved)

COLOR KEYS Feature buttons

Stand by mode or program watching state

Number pad to enter menu item or to select a channel

Displays EPG menu

Select language for audio channels

Display program synopsis information of the current channel

Display the main menu

Go to watching state or exit any specific menu

Display favorite channel list

Front Panel

Rear Panel

CONNECT TO USB DEVICE

COMPOSITE VIDEO BROADCAST SIGNAL

CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER

CABLE IN: CONNECT TO CABLE SIGNALLOOP OUT: CONNECT TO ANOTHER RECEIVER

The picture is for reference only. Your equipment may be configured differently.

PREPARATION OF REMOTE CONTROL

1. Open the battery cover.

2. Insert the batteries in the correct direction. Please ensure that the anode and cathode ends of

the battery are corresponding to the polarity indicated in the remote control.

3. Replace the battery cover.

OPERATION SCOPE OF THE REMOTE CONTROL

Point the remote control towards the Set Top Box in order

to control the apparatus, ensuring that the Set Top Box is

not obstructed in any way.

1. Distance: the remote control will work up to seven

meters from the SetTop Box.

2. Angle: The remote control will work up to 30 degrees

right or left of the Set Top Box panel.

PRECAUTIONS ABOUT BATTERIES

Improper use of batteries may cause corrosion or fluid leakage. Please observe the following

instructions for the safe use of batteries.

1. Insert the batteries taking care to ensure that they are facing the correct way.

2. Never leave dead batteries in the remote control.

3. Remove batteries from the remote controller if it is not going to be used for an extended

period of time

4. Do not attempt to disassemble, short-circuit, heat, recharge or throw the batteries into any fire

source if even if they are not working.

5. Do not use new batteries and old ones together. Use batteries of the same type together.

6. Wipe away any electrolyte fluid that may have leaked into the remote controller before

inserting new batteries.

- Live

- Guide

- My Content

- Settings

- Features

- Diagnostics

Live

Once you have installed and powered on the Set Top Box the main menu list will be

displayed as follows:

Use these keys to navigate up/down and select required options

Use these keys to navigate main menu and left /right to select the required options.

At any point of time press EXIT key to go back to the previous menu

8

All channels will be listed on the right side of the menu.

2. Guide

3. My Content

Following sub-menus will be displayed when you select the

“ ” menu:

- Scheduled Recordings

- My Recordings

- Disk Space Usage

My Content

Show TV Guide information.

4. Settings

Following sub-menus will be displayed when you select the

“Settings” menu:

- TV Settings

- Parental Control

- General

- Times

- Tech Setting

9

3.1 Scheduled Recordings

3.2 My Recordings

All shows you record will be listed in this menu. You can

see the recorded shows on the right side of the screen.

3.3 Disk Space Usage

This displays how much disk space you have already used.

To re-format the harddisk press the red key on your remote

control unit.

4.1 TV Settings

This menu allows you to select from different aspect ratios for display on your television screen.

4.1.1 Video

This menu allows you to edit the audio mode and volume.

4.1.2 Audio

Show scheduled recordings.

10

4.2 Parental Control

a. Change PIN Code select this option in order to

change the PIN code for this STB.

b. Channel Lock: select this option for selecting

channels to be under PIN control.

c. Maturity Level: select this option for selecting

channels to be under PIN control based on their rating.

d. Scheduled Lock: select this option to schedule

start and end times during which PIN is required for

viewing television channels.

:

4.3 General

4.3.1 Factory Reset

This option will reset the set top box to factory default

settings. On pressing this option, a warning message will

appear and prompt for confirmation. Select “CONFIRM”

in order to factory reset the set top box.

4.3.2 STB Upgrade

This menu option allows you to upgrade the software on the set top box (STB).

4.1.3 Language

4.1.4 Screen Saver

4.1.5 Opacity Level

4.1.6 Disk space limit

This menu allows you to select when screensavers should come on the set top box.

This menu allows you to select how transparent the menus should be on screen.

This menu allows you to select the maximum amount of space to be used on the

hard disk for recordings.

This menu allows you to select from different languages (if available) for display

menus and different audio tracks.

11

4.4 Timers

a. Reminders: These are notifications for shows that you

want to be reminded about. This menu allows you to

customise how reminders are set and when notifications

should appear.

b. Notification: Select when notifications should appear

on the set top box

c. Duration: Select how long each notification should last

on the set top box

d. Sleep timer: Select how long the set top box should

wait before going into sleep mode

e. Banner/Popup Duration: Select how long the volume

banner or popup should remain visible on screen after

you have selected it.

4.5 Tech Setting

This feature is only for technical staff.

5. Features

- Favorite List

- Mail

- Search

- Skins

Following sub-menus will be displayed when you select the “ ” menu :Features

5.1 Favorite List

In this menu, you can create favorite list, modify favorite

list, rename favorite list, delete favorite list and select list.

12

5.2 Mail

Select this menu in order to see messages that have

been sent to you by NXT Digital.

5.3 Search

5.3.1 Search Guide

5.3.2 Search my content

Select this menu in order to search for specific

programmes or information on your Set Top Box.

Select this menu in order to search for specific

programmes or information only on your recorded content.

5.4 Skin

Select this menu to change the colour of the menus on

your set top box.

6. Diagnostic

Following sub-menus will be displayed when you select the

“ menu:

- Device Information

- CA Information

- Secure Device

Diagnostic”

6.1 Device Information

Select this menu to show all device information. It is

recommended that you go to this page when calling the call

centre for any help.

13

6.2 CA Information

5.3 Secure Device

Select this menu to show device security information.

Select this menu to show all conditional access information relating to this set top box.

14

Problem Possible causes What to do

The display on the front panel does not light up.

No sound or picture, but thefront panel shows red light.

Mains cable is not properly connected or faulty.

The is in standby mode.receiver

Check that the main cable is plugged into the power socket.

Press the standby button on the remote control unit

No sound and picture.The connection between the cable and the set top box may be faulty or there is no signal.

Check the connection between the set top box and the cable.

Bad picture / blocking error. Cable signal is too weak. Adjust the strength of signal.

The RCU is not working.

Battery exhausted. Change the batteries.

RCU is incorrectly aimed.Aim RCU at the , or check that nothing blocks the front panel.

receiver

Note: If the problem still persists after you have tried the actions suggested above,

please contact your dealer or service provider.