thomas product overview 20160901 product overview 201… · surface of the coupling is rubber...
TRANSCRIPT
OverviewProduct
CONNECTING INNOVATION
WWW.THOMASPIPEPRODUCTS.COM
TEL: +27 21 556 5258
JOHANNESBURG
CAPE TOWNOF PIPE CONNECTION, REPAIR AND
FLOW CONTROL SOLUTIONS
DESIGNER, MANUFACTURER AND DISTRIBUTOR
SEP 2016
PIPE PRODUCTS
THOMASDesignerManufacturerDistributor
Pipe Repairs
Pipe Fittings
Valves & Strainers
Tap In Products
Technical Data
Couplings & Flange Adaptors
Restrained Products
Couplings & Flange Adaptors
Dism. Joint & Rest. FA EvoGrip
G-Flex Gripper PolyGrip
Flanged Flexibility
Allows for Adjustment
The Range
Dismantling Joints & Restrained Flange Adaptors are designed to provide greater versatility for the designer at the planning stage and the contractor at the installation stage of flanged pipe work systems. Dismantling Joints allow for simpler valve and pump maintenance in chambers.
Dismantling Joints are double flanged fittings that accommodate 50mm (2”) axial adjustment. For applications where a full-face flange is required, such as wafer and butterfly valves, the full-face of the spigot flange provides a full flange sealing area. Once positioned at the required length the product is locked into position with the tie rods supplied. Thereby creating a restrained connection.
DN40 - 3000mm any flange drilling up to PN64.
Application
Cost Effective
The Range
EvoGrip Couplings are designed to provide fully restrained joints for HDPE pipework. The coupling is suitable up to and including a working pressure of 16 bar (1600 kPa).
The EvoGrip is:- light weight & cost effective- corrosion resistant- extremely simple to install.
The EvoGrip can be used on site immediately, eliminating the cost and need for Butt Welding machines for the connection of HDPE pipe. Replacing TAK Clamps and Stub & Flange connections for HDPE pipe.
EvoGrip Couplings are available for 110mm & 160mm HDPE.
Application
Advantages
The Range
G-Flex Gripper Couplings are designed to provide fully restrained joints for metallic pipework. The coupling is suitable for working pressures from 12 to 30 bar depending on the nominal size. With its corrosion resistant stainless steel construction and full end load restraining performance, the G-Flex Gripper is ideal for the marine industry.
The G-Flex Gripper replaces:- welding; flanging; threading & grooving.
The coupling is ready to use and fitted in a matter of minutes without heavy equipment and long setup times. Manufactured from Stainless Steel with rubber seals suitable for potable water or chemicals such as various oils.
G-Flex Gripper couplings are available for steel pipe from DN20 - 350mm.
Application
Advantages
The Range
The PolyGrip Range was designed as a simple, high performance end load restraint mechanical method of joining PVC and HDPE pipe. Designed to support and grip the pipe, preventing pipe collapse and pipe end pullout. The coupling is suitable for working pressure up to 16 bar (1600 kPa).
The PolyGrip Range includes the following:- Couplings -Flange Adaptors
- Fittings - Harnesses
Ready and simple to use. PolyGrip products can be installed under wet conditions without shelters, and even under water. It is ideal for on-the-spot repairs, no need for fusion jointing equipment when unexpected problems arise.
PolyGrip products are available from 90 - 315mm PVC and HDPE pipe outside diameters.
1
Applications: Gas ProductsWater Products Industrial Applications
G-Flex Install Low Pressure Coupling
DediFit for PVC
Non Restrained Products
Couplings & Flange Adaptors
Flexibility
Superior Design
The Range
G-Flex Install Couplings are high performance couplings allowing pipe angular deflection, expansion and contraction.
G-Flex Couplings are manufactured from full stainless steel offering superior corrosion protection. The entire internal surface of the coupling is rubber lined, enabling these products to be used for harsh pipeline contents. EPDM, NBR or specialized rubber compounds are available.
G-Flex Couplings utilize a ‘self-energizing’ rubber seal. As the pressure increases, the lip seals are pressed more tightly against the pipe surface. This makes the G-Flex the best possible means of connecting GRP pipe.
G-Flex couplings are available in Stainless Steel or FBE coated mild steel from DN20 - 3000mm for virtually any pipe material.
Application
The Range
LP Couplings are dedicated couplings designed as simple, cost effective methods of joining large diameter Structured Wall Pipes (SWP) such as:
- Starway Pipe - Weholite Pipe
Offering excellent corrosion resistance with full stainless steel construction.
The Starway Coupling is for use on Starway SWP only.
The Weholite LP Coupling is designed for joining Weholite SWP. However, the Weholite LP Coupling can be used on any pipe material of gravity fed pipelines not exceeding 1 bar (100kPa), such as Concrete.
Starway Couplings from DN200 - 2200mm. Weholite LP Couplings from DN280 - 3000mm.
Dedicated Couplings for PVC Pipe
The Range
DediFit Couplings are designed specifically for quick and simple installation on PVC pipe. The limited & dedicated operating range ensures the couplings are tight with only several turns of the nut.
DediFit Couplings are supplied in Red Oxide Fusion Bonded Epoxy corrosion protection. Sizes available include:
- 63mm- 90mm- 110mm- 160mm- 200mm- 250mm- 315mm.
All couplings are suitable for a 16 Bar Working Pressure.
Designed for Flexibility
Design Capability
The Range
Thomas Large Diameter Couplings & Adaptor Products are designed to allow several degrees of pipeline angular deflection. Ideal for accommodating misaligned pipes. Simplifying the task of the design engineer & contractor.
With input from customers, products can be designed specifically to suit certain applications. Longer barrels, higher pressures, different coatings, special steels and specialized rubber compounds are some of the non-standard components added at design stage.
A comprehensive range is available from DN700 - 3000mm. Stepped couplings join pipes of different external diameters and flange adaptors can be supplied with flanges drilled to any national or international standard, or to a customers own detailed specification with pressure ratings up to 64bar (6400kPa).
2
Dedicated Large Diameter
Unifit Series
Universal Wide Range Couplings & AdaptorsThomas Unifit universal pipe couplings are designed to accommodate plain ended pipes with different outside diameters. One fitting is able to connect a wide variety of pipe materials including steel, ductile iron, PVC, cast iron, GRP and asbestos cement pipes, amongst others. The range is designed and manufactured under a strict quality management system and the products meet the requirements of SANS 1808-2 of the South Africa Bureau of Standards. All products in the range have a test pressure of 24bar on water (9bar on gas) and are suitable for 16bar working pressure for water (6bar on gas). Higher pressures up to 64bar are available on request.
3
Specials
Extensive Range
Longer barrels, higher pressures, different coatings, special stainless steels and specialized rubber compounds are some of the non-standard components available. We are able to design and manufacture special couplings according to customer requirements.
An extensive range from DN15 mm - DN600mm exists for: - Couplings & Long Barrel Couplings - Universal Drilling & Steel Flange Adaptors - Step Couplings - End Caps and End Plugs.
For joining plain ended pipes of similar or dissimilar materials, UNIFIT Universal Couplings have wide sealing tolerances ensuring all popular pipe materials can be connected. From DN40 - 600mm. Larger diameter wide range couplings can be manufactured.
UNIFITdesigned specifically for the connection of GRP & HDPE pipe. Barrel lengths are specified to cater for HDPE expansion & contraction upon installation. They can be used to span large gaps between pipe ends.
Long Barrel Couplings are
UNIFITconnecting pipes of different nominal bore and different pipe material. From DN40 - 3000mm. Restraining cleats and harnesses can be provided to prevent step couplings moving. Double bolt sets are available for GRP connections.
Step Couplings are used for
JUNIOR COUPLINGSthe quick and easy connection of galvanized mild steel pipes from DN15 - 50mm.
are used for
For joining flanged pipeline components to plain ended pipes, UNIFIT Universal Flange Adapters have wide sealing tolerances and a universal flange drilling to suit T1000/3 & T1600/3. From DN40 - 300mm.
UNIFITavailable in any flange drilling from PN6 to Pn64 and any nominal bore from DN40 - 3000mm. Restrained Flange Adapters are also available.
Steel Flange Adaptors are
UNIFITsuitable for all rigid pipe materials. Sockets for pipe testing can be added as required. Sizes from DN40 - 3000mm. Internal test plugs can be manufactured.
External Test Caps are
S P E C I A L S Customers can specify special materials for bolts, rubbers seals, sleeve and end rings. Higher pressure ratings are available up to 64bar. Special corrosion protection coatings and dimensions can be made to order for all products.
a r e a v a i l a b l e .
MIN
MA
X
TC
4048
58
TC
5059
73
TC
50-2
5978
TC
6572
85
TC
65-2
7490
TC
8088
103
TC
100
9811
8
TC
100-
210
812
8
TC
125
132
154
TC
150
150
170
TC
150-
215
918
2
TC
150-
318
019
4
TC
175
192
209
TC
175-
220
522
2
TC
200
218
235
TC
225
235
252
TC
225-
225
026
7
TC
225-
326
027
4
TC
250
271
289
TC
250-
228
630
4
TC
300
302
318
TC
300-
231
533
2
TC
300-
333
435
0
TC
350
344
360
TC
350-
235
637
2
TC
350-
337
439
1
TC
400
391
407
TC
400-
240
141
7
TC
400-
341
743
7
TC
400-
443
044
6
TC
450
444
460
TC
450-
245
847
4
TC
450-
347
749
3
TC
500
494
510
TC
500-
250
952
3
TC
500-
351
853
4
TC
500-
452
654
6
TC
500-
555
657
2
TC
500-
657
759
3
TC
600
604
614
TC
600-
261
162
4
TC
600-
362
764
3
CODE
CO
UP
LIN
GR
AN
GE
(mm
)
PIP
E O
D v
s T
HO
MA
S C
OU
PL
ING
CO
DE
4
Pipe Repairs
Easi Clamp G-Flex Repair
Ultra Clamp
Application
The Range
Easi Clamps are a cost effective means for repairing damaged pipes of higher working pressure. They are installed around the pipe over the damaged area. Easi Clamps offer +/- double the working pressure of a similar size Stainless Steel Pipe Repair Clamp (see Ultra Clamp) & can also be used to close up openings made in pipe walls for inspection purposes.
Easi Clamps are manufactured from mild steel and supplied epoxy coated. They operate as full circumferential pipe repair clamps, complete with a stainless steel armour plate vulcanized into the rubber seal at the time of moulding. Easi Clamps should not be used to join pipes, however they are suitable for repairing circumferential pipe breaks.
DN40 - 1200mm.
Permanent Pressure Pipe Repair
Superior Pressure Rating
The Range
The G-Flex Repair Coupling is ideal for situations where a permanent repair of a pressure pipeline is required. Simply open up the coupling, wrap it around the damaged pipe and tighten the bolts. The pipe is repaired within minutes, thereby avoiding costly downtime. Being internally rubber lined and manufactured from Stainless Steel, the G-Flex Repair Coupling exhibits excellent corrosion resistance.
G-Flex Repair Couplings offer the highest pressure rating of any wrap around pipe repair clamp or coupling. Traditional Stainless Steel Pipe Repair Clamps (such as the Ultra Clamp) are unable to match the working pressure rating of a G-Flex Repair Coupling.
DN20 - 3000mm for virtually any pipe material.
Repair Collar
Application
The Range
For the Repair of:- Leaking Bell & Spigot Pipe Joints- Leaking AC or GRP Pipe Collars- Leaking Couplings.
Repair Collars are made to order offering a quick and economical method of repairing leaking pipe joints. Creating a flexible joint that uses the same sealing principles as a standard mechanical coupling.
Repairs Collars offer massive savings to the pipeline operator as the pipeline need not be emptied or cut in order to install the product to make the repair. Repair Collars are installed directly over the leaking joint or coupling without removing the existing leaking joint or coupling.
DN40 - 3000mm.
Application
Permanent Repair
The Range
The Ultra Clamp Series is a comprehensive range of stainless steel pipe repair clamps for rigid pipe materials. They should not be used to join pipes.
Ultra Clamps are available in various clamp lengths (up to 1200mm wide) and they are suitable for virtually any pipe material. Ultra Clamp products from DN40mm and greater are supplied as full circumferential repair clamps, complete with a stainless steel armour plate vulcanized into the rubber seal at the time of moulding. Ultra Clamps are constructed from 100% stainless steel and therefore offer a permanent repair for many types of pipe damage such as cracks, holes and corrosion pitting. Special sizes and widths, and high speed manufacturing for urgent breakdowns are available on request .
DN15 - 1200mm.
5
PIP
E O
D v
s U
LT
RA
CL
AM
P C
OD
E
6
MIN
MAX
TUC1
-004
945
55
TUC1
-006
259
67
TUC1
-007
269
76
TUC1
-007
875
83
TUC1
-009
087
93
TUC1
-009
995
104
TUC1
-011
010
411
3
TUC1
-011
611
312
0
TUC1
-012
512
113
0
TUC1
-013
012
613
6
TUC1
-014
013
614
2
TUC1
-015
014
515
5
TUC1
-015
715
016
1
TUC1
-016
716
517
6
TUC1
-017
817
418
3
TUC1
-018
417
918
9
TUC1
-019
318
819
9
TUC1
-020
019
520
5
TUC1
-020
620
221
2
TUC1
-022
321
822
8
TUC1
-023
322
923
8
TUC1
-024
123
624
5
TUC1
-025
224
825
7
TUC1
-026
325
826
8
TUC1
-027
627
128
1
TUC1
-028
728
129
1
TUC1
-029
929
430
4
TUC1
-030
930
431
4
TUC1
-031
531
032
0
TUC1
-032
532
033
0
TUC1
-033
232
733
7
TUC1
-034
734
235
2
TUC1
-035
835
336
3
CODE
CLAM
PRA
NGE
(mm
)
6
CO
D6
1218
2430
366
1016
20
4048
.3TU
C1-
0049
5060
.3TU
C1-
0062
50TU
C1-
0049
69TU
C1-
0072
6576
.1TU
C1-
0078
63TU
C1-
0062
82TU
C1-
0078
7598
TUC
1-00
99
75TU
C1-
0072
96TU
C1-
0099
8088
.9TU
C1-
0090
90TU
C1-
0090
100
114.
3TU
C1-
0116
118
TUC
1-01
16
110
TUC
1-01
10
122
TUC
1-01
25
125
139.
7TU
C1-
0140
125
TUC
1-01
25
150
TUC
1-01
50
140
140
TUC
1-01
40
150
165.
1TU
C1-
0167
170
TUC
1-01
67
160
TUC
1-01
57
177
TUC
1-01
78
168
TUC
1-01
67
174
TUC
1-01
78
180
TUC
1-01
84
188
TUC
1-01
93
196
TUC
1-02
00
175
193.
7TU
C1-
0193
205
TUC
1-02
06
200
219.
1TU
C1-
0223
222
TUC
1-02
23
200
TUC
1-02
00
232
TUC
1-02
33
222
TUC
1-02
23
229
TUC
1-02
33
239
TUC
1-02
41
250
TUC
1-02
52
262
TUC
1-02
63
225
244
TUC
1-02
41
259
TUC
1-02
63
250
273
TUC
1-02
76
274
TUC
1-02
76
250
TUC
1-02
52
286
TUC
1-02
87
274
TUC
1-02
76
284
TUC
1-02
87
295
TUC
1-02
99
304
TUC
1-03
09
318
TUC
1-03
15
258
TUC
1-02
63
258
TUC
1-02
63
260
TUC
1-02
63
262
TUC
1-02
63
300
324
TUC
1-03
25
326
TUC
1-03
25
315
TUC
1-03
15
345
TUC
1-03
47
328
TUC
1-03
32
340
TUC
1-03
47
353
TUC
1-03
58
365
TUC
2-03
65
378
TUC
2-03
78
309
TUC
1-03
09
309
TUC
1-03
09
311
TUC
1-03
15
314
TUC
1-03
15
327
TUC
1-03
32
350
356
TUC
1-03
58
378
TUC
2-03
78
355
TUC
1-03
58
399
TUC
2-03
99
378
TUC
2-03
78
382
TUC
2-03
82
396
TUC
2-03
96
412
TUC
2-04
12
426
TUC
2-04
26
440
TUC
2-04
40
359
TUC
1-03
58
360
TUC
1-03
58
363
TUC
1-03
58
365
TUC
2-03
65
379
TUC
2-03
79
NB
STEEL
DI
PVC / HDPE
FIB
RE
CE
ME
NT
PIP
ES
GR
P
VE
CTU
S
FLOWTITE
Pipe Fittings
PolyGrip Fittings
Application
The Range
Fabricated PolyGrip Fittings were designed as simple, high performance, full end load restraint, mechanical, socketed fittings for PVC and HDPE pipe. PolyGrip Fittings, Couplings, Flange Adaptors and Restraining Harnesses are designed to support and grip the pipe, preventing pipe collapse and pipe end pullout. PolyGrip fittings are suitable for a working pressure of up to 16 bar (1600 kPa). Fabricated PolyGrip Fittings of any shape can be manufactured to order, including bends, equal & un-equal tees, scour tees, crosses, puddle pipes etc...
Cast Ductile Iron Fittings for PVC pipe are the most economical method of introducing small bore fittings into a PVC pipeline. By combining a PolyGrip Harness with a Cast Ductile Iron Fitting, it can be used as a fully restrained fitting for PVC or HDPE pipe.
PolyGrip Products are available from OD90 - 315mm.
Application
Socketed Fittings
The Range
Fittings such as Tees, Bends, Reducers, Puddle Pipes etc., are manufactured to order. Corrosion protection coatings such as Carboline or Sigmaguard can be specified.
A socketed fitting is a fabricated steel fitting with a socketed end that consists of a self contained ‘half coupling’ that is suitable for virtually all rigid pipe materials. Plain ended pipe materials such as PVC, GRP and Ductile Iron can be inserted directly into the socketed fitting. Thus eliminating the need for special step couplings and providing special fittings suitable for all rigid pipe materials.
DN40 - 1200mm.
Flanged Fitting Socketed Fitting
7
Fabricated Fittings
Advantages
Special Coatings
The Range
- Quick, simple, cost effective installation- No bolting required on site- Lighter than Cast Ductile Iron Fittings- Economically priced, less costly than Cast fittings- Locally manufactured, short lead times- Supplied with quality self-energizing seals- Robust- Various coatings available- Any standard or special fitting can be manufactured...
Corrosion protection coatings of Fusion Bonded Epoxy (FBE), Two Pack Wet Spray Epoxy and Hot Dipped Galvanizing are available.
630mm OD PVC pipe up to 25 Bar Working Pressure.
EnerSeal Boltless Fittings
ApplicationLarge Diameter Boltless Socketed Fittings for 630mm PVC pipe. This is the most economical method of introducing fittings into a large diameter PVC pipeline. Our comprehensive range of fabricated EnerSeal fittings includes, but is not limited to the following:
- Bends- Equal Tees, Scour Tees, Hydrant Tees- Socketed Puddle Pipes- Y Pieces- Crosses- Flange Adaptors- Pressure Testing End Caps- Straight Repair Connectors- etc...
We WILL supply weld on sockets to customers andfitting fabricators. Enabling customers to manufacture their own EnerSeal Socketed fittings.
8
Valves & Strainers
Y Strainers
V-Loc Valves
The Range of ProductsThe V-Loc Range of plumbing products includes the following:
- Zinc Alloy Ball Valves (DN8-100mm)- DZR Approved Brass Ball Valves (DN15-50mm)- PVC Ball Valves (DN15-50mm)- Nylon Ball Valves (DN15-50mm)- Brass Gate Valves (DN15-100mm)- Brass Check Valves (DN15-100mm)- Brass Taps (DN15-20mm)- Galvanized Malleable Iron Fittings (DN15-50mm)- Galvanized Mild Steel Pipe (DN15-100mm)
Stock Availability
Size Range
Extremely large stock quantities are kept of all V-Loc products making them available at very short notice.
DN8 - 100mm, depending on the product.
Application
Advantages
The Range
Strainers remove damage causing particulate matter from the pipeline media, protecting system components such as flow meters, pumps, mechanical seals and valves. The particulate matter is captured in the strainer basket. The pipeline is then temporarily shut down and the basket removed for cleaning or replacement.
‘Y’ Strainers are common place in pipelines and they offer an affordable and effective product. They are generally readily available up to DN300mm.
DN50 - 300mm, PN10-16.Larger ‘Y’ Strainers can be imported on request.
Advantages of a Pot Strainer
The Range
Pot Strainers reduce downtime for cleaning due to their construction including a bolted top cover and easily removable screen. They are accessed from above making them far easier to clean and replace the screen. Screens can be manufactured from any material, Stainless Steel Grade 316 is the preferred standard. Lifting eyes and handles are supplied on the cover plate of larger pot strainers enabling easier removal and replacement thereof.
‘Y’ Strainers are cleaned from underneath, often resulting in difficult access.
Pot Strainers can be manufactured to customer requirements including specialized coatings and dimensions.
DN50 - 900mm, PN10-64.
Pot Strainers
RDZAPROVED
P
‘Y’ Strainers
Tap In Products
DI Saddle for PVC Pipe Buffalo Saddle
Under Pressure Drill
Easi Tee
Application
Design Advantages
Ductile Iron Saddles for PVC pipe are dedicated saddles specific to PVC pipe. A dedicated range is available for pipes from OD63 - 200mm with branch outlet sizes of DN25mm or DN50mm female screwed BSP sockets.
The saddle head includes a moulded rubber seal that extends below and up into the saddle outlet. The castings are drilled & tapped eliminating loose nuts and washers.
Tap In Flexibility
Allows for Adjustment
The Range
Buffalo Saddles are designed to offer the installer a universal saddle that will accommodate almost all rigid pipes diameters of a single nominal bore.
The Buffalo Saddle utilizes a stainless steel strap band that is tightened via fasteners on each side of the saddle head. The length of the fastener enables the strap band to be assembled around pipes of up to 20mm diameter variance. Single strap and double strap saddle heads are available with BSP screwed outlets from DN20 - 100mm or flanged outlets from DN50 - 100mm.
In conjunction with our Under Pressure Drilling kit, Buffalo Saddles and Easi Tees enable quick, economic and trusted Tap In solutions.
For pipes from DN50 - 600mm with branch outlet sizes from DN20 - 100mm.
Application
Complete Solution
The Range
Under pressure drilling is the precise process of drilling a hole into a flowing pipe system without leaking its contents or interrupting flow. We design and manufacture tapping saddles and tees that can be tailor made to your individual requirements, you install them and tap into a live operational pipeline with an Under Pressure Drilling (UPD) kit.
If customers do not want to purchase a UPD, we have the facility to Tap In for our customers using our in house equipment.
Under Pressure Drill kits are sold neatly packed in a robust steel box ready for use.
Under Pressure Drill Kits are available with cutting heads from DN15 - 150mm.
Application
Permanent Tap In Connection
Stainless Steel full circle tap in saddles & tees.
Ultra Saddles and Tees are available in various clamplengths (up to 600mm wide) and suitable for virtually any pipe material. Supplied complete with stainless steel armour plate vulcanized into the rubber seal at the time of moulding, offering a permanent tap in solution. Available for pipe sizes from DN40 - 600mm.
Application
Advantages
Easi Teecan be installed on live pipelines. Available from DN40 - 600mm with outlets available up to DN300mm.
Easi Tees circumferential seal around the pipe, supporting the pipe structurally.
s are robust bolt on Tee Pieces that
offer a secure, rigid, full
9
Ultra Saddle & Tee
Our History
Quality
Established in September of 2007, is innovative, technology driven, quality minded and one which acts with integrity with the interests of our suppliers, customers and employees at heart. Thomas Pipe Products currently employs over 80 people and sells product into over 16 countries.
Thomas Pipe Products is a company founded on humble beginnings. It is a company that
We strive to meet or exceed the relevant industry standards for our products. With regular testing at the South African Bureau of Standards and submissions to JASWIC for accreditation we aim to maintain and continuously improve our product quality.
We Specialise in Specials...
10
NooitgedachtDN1500mm Step Couplings & Adaptors forBulk Water GRP Pipeline
Port ElizabethDN1500mm End CapPipeline Testing
RawsonvilleDN900mm BulkSteel Pipeline
Medupe Power StationDN350mm ReticulationSystem
Durban MetroDN900mm DedicatedFlange Adaptors
JHB Water DN450 EmergencyStep Couplings
Kitwe ZambiaDN700mm WeholiteSWP LP Couplings
ParowDN400mm SteelPipe Live Tap In
AngolaDN500mm SS316Special Fittings
MauritiusDN700mm AC PipeRepair Collar
Churchill DamDN900mm Steel Bulk Pipeline
DesignerManufacturer
Distributor
TH
OM
AS
PIP
E P
RO
DU
CTS
TABLE OF POPULAR PIPE SIZES
COD 6 12 18 24 30 36 6 10 16 20
40 48,3 40
50 60,3 50 69
65 76,1 63 82
75 75
80 88,9 98 90 96
100 114,3 118 110 122
125 139,7 125 150
140 140
150 165,1 170 160 177 168 174 180 188 196
175 193,7 205
200 219 222 200 232 222 229 239 250 262
225 244 259
250 273 274 250 286 274 284 295 304 318 258 258 260 262
300 324 326 315 345 328 340 353 365 378 309 309 311 314 327
350 356 378 355 426 378 382 396 412 426 440 359 360 363 365 379
400 406 429 400 453 430 436 450 468 484 503 409 410 414 417 413
450 457 480 450 507 483 488 506 524 545 566 459 462 466 470 464
500 508 532 500 560 535 543 560 583 606 629 510 511 517 521 515
525 587
550 559 614 561 563 569 573
600 610 635 630 667 638 651 672 699 727 755 612 614 620 624 617
650 660 720 662 665 672
700 711 738 773 744 760 784 816 848 712 716 723 719
750 762 826 762 767 775
800 813 842 879 850 868 896 935 969 813 818 826 821
850 864 864 868 878
900 914 945 985 956 976 1008 1048 915 919 929 923
950 965 965 970 981
1000 1016 1048 1090 1062 1084 1120 1165 1016 1020 1032 1025
FIBRE CEMENT PIPESVECTUS
GRP
FL
OW
TIT
E
NB
ST
EE
L
DI
PV
C / H
DP
E
WWW.THOMASPIPEPRODUCTS.COM
TEL: +27 21 556 5258
JOHANNESBURG
CAPE TOWNOF PIPE CONNECTION, REPAIR AND
FLOW CONTROL SOLUTIONS
DESIGNER, MANUFACTURER AND DISTRIBUTOR
CONNECTING INNOVATION