three phase 460 vac electric motors
DESCRIPTION
Heavy duty electric motors, 6 pole, 1200 RPM. In stock, Houston Texas.TRANSCRIPT
Motors for the
Oil and Gas Industry
Three Phase Motor
Oilwell, Explosion Proof, Chemical
Power King Electric LLC.
Power King Electric LLC 11152 Westheimer Rd, #968 Houston, Texas, USA Email: [email protected] _______________________________________________________________________________________________________
Why Power King?
For more than 5 years, Power King strives to provide the most
reliable OEM industry motor to US lead industry motor brand
The supplier chain people preferred PKE
high quality, fast delivery and cost saving.
� Annual production capability of
� Standard: CSA UL
� Models of motors: All purpose
Professional
PKE is proud of supporting US oil production
withstand the brutal punishment of the west Texas heat or
rated TEFC, NEMA design D, 60hz, available
15hp to 100 hp. Call or Email us. Customer
Electrical
Features
Description
Voltage 460/796 VAC six leads or 230/796 VAC twelve leads.
Frequency 60 Hz standard, 50 Hz derate capability, 50 Hz designs available.
Efficiency Power King Electric NEMA Motor is manufacture according to Energy
Independence and Security Act of 2007,
standard. Efficiency Level:
Premium Efficiency
Energy Efficiency
Energy Efficiency
Premium Efficiency
Service Factor 1.15 standard
Rating Continuous duty 40 degrees C ambient temperature.
Winding Design NEMA Design D, high torque
Coil end turns are lace and
result in premature failure.
Magnet Wire Moisture Resistant wire.
Temperature Rise Class B temperature rise maximum at full load, insuring longer motor life.
Insulation Class F insulation with
Lead Wire Material Copper wire, insulated with Class F non
Thermostats PTC or PT100 Normally
_______________________________________________________________________________________________________Why Power King?
For more than 5 years, Power King strives to provide the most
US lead industry motor brands.
PKE. We are well known for
high quality, fast delivery and cost saving.
Annual production capability of motors: 12, 000 sets
purpose, Chemical, Oil and Gas industry, Oilwell pumping motor
Professional in the oil and gas Industry motors
US oil production industry. PKE beam pumping motor are designed to
withstand the brutal punishment of the west Texas heat or the cold of North Dakota. Oilwell pumping motor
available from 900 RPM, 1200 RPM, 1800 RPM, 3600 RPM, instock
Call or Email us. Customer Satisfaction guaranteed.
Design Features
460/796 VAC six leads or 230/796 VAC twelve leads.
60 Hz standard, 50 Hz derate capability, 50 Hz designs available.
Power King Electric NEMA Motor is manufacture according to Energy
Independence and Security Act of 2007, Premium efficiency
Efficiency Level:
Premium Efficiency NEMA MG1 Table 12-12, 1~200HP 2 Pole, 4 Pole & 6 pole;
Efficiency NEMA MG1 Table 12-11, 250HP ~ 500HP
Efficiency NEMA MG1 Table 12-11 3~350HP 8 Pole
Premium Efficiency NEMA MG1 Table 12-12 JM/ JP 2 Pole, 4 Pole & 6 Pole
1.15 standard on cast iron frame motors. 1.0 standard on rolled steel frame motors.
Continuous duty 40 degrees C ambient temperature.
NEMA Design D, high torque-high slip (5-8%), ideal for use on beam pumping units.
turns are lace and tied every slot to prevent movement of coils which could
result in premature failure.
Moisture Resistant wire.
Class B temperature rise maximum at full load, insuring longer motor life.
Class F insulation with Phenolic Alkyd, VPI Varnished with double times.
Copper wire, insulated with Class F non-wicking cross-linked
PTC or PT100 Normally-closed thermostats connected in series are embedded in
__________________________________________________________________________________________________________________________________
pumping motor
in the oil and gas Industry motors
. PKE beam pumping motor are designed to
the cold of North Dakota. Oilwell pumping motor
from 900 RPM, 1200 RPM, 1800 RPM, 3600 RPM, instock
60 Hz standard, 50 Hz derate capability, 50 Hz designs available.
Power King Electric NEMA Motor is manufacture according to Energy
Premium efficiency High Energy efficiency
2 Pole, 4 Pole & 6 pole;
250HP ~ 500HP 2Pole,4Pole & 6 Pole
8 Pole
2 Pole, 4 Pole & 6 Pole
on cast iron frame motors. 1.0 standard on rolled steel frame motors.
8%), ideal for use on beam pumping units.
tied every slot to prevent movement of coils which could
Class B temperature rise maximum at full load, insuring longer motor life.
Phenolic Alkyd, VPI Varnished with double times.
linked polymeric cover.
closed thermostats connected in series are embedded in
Power King Electric LLC 11152 Westheimer Rd, #968 Houston, Texas, USA Email: [email protected] __________________________________________________________________________________________________________________________________
the stator winding and Bearing for over-temperature protection. (Connect in series
with magnetic starter holding coil.)
Mechanical
Features
Description
Construction Cast iron frames on 254T thru 405T with TEFC enclosure. Choice of cast iron or
rolled steel frames on 254T thru 326T, with open drip proof enclosure. Rolled steel
frames on 213T with open drip proof enclosure.
Enclosure Open drip-proof or TEFC enclosure. IP55
Conduit Box Oversized, The box is rotatable 360 degrees in 90 degree* increments. Cast iron
frame motors are field convertible to F-1 mount.
Nameplate Aluminum with complete operating date in accordance with NEMA MG1.
Hardware S.A.E. standard, zinc or cadmium plated steel.
Lifting Provisions All motors are equipped with forged eyebolts for ease in handling.
Mounting F1 Mounting, F2 is available
Rotor Construction High-pressure die cast aluminum squirrel cage rotors are standard.
Shaft Material 1045 on frames 143T~ 447T. Alloy Steel and Heat Treatment on frames 449T~
586T
Paint Two part epoxy paint system with 4-6 mils thickness, suitable for extended
operation outdoors in extreme conditions. White color for heat reflection.
Power King Motor SKF or NHK BEARING Specification
FRAME SIZE DRIVE-END NON DRIVE-END
213~215T-6 DESIGN D 6308-ZZ C3 6308-ZZ C3
254~256T-6 DESIGN D 6309 C3 6309 C3
284~286T-6 DESIGN D 6311 C3 6311 C3
324~326T-6 DESIGN D 6312 C3 6312 C3
364~365T-6 DESIGN D 6313 C3 6313 C3
404~405T-6 DESIGN D NU316 C3 6313C3
444~445T-6 DESIGN D NU318 C3 6313C3
Power King Electric LLC 11152 Westheimer Rd, #968 Houston, Texas, USA Email: [email protected] __________________________________________________________________________________________________________________________________
Pumping Unit
Model Oil Well Motor HP PKE Motor Part Number
C114-133-54
15hp to 20hp PKE-15-12-N284T-6D
PKE-20-12-N286T-6D
C114-173-64
C114-143-74
C114-119-86
C160-173-64
20hp to 25hp PKE-20-12-N286T-6D
PKE-25-12-N324T-6D
C160-143-74
C160-173-74
C160-200-74
C160-173-86
C228-173-74
25hp to 30hp PKE-30-12-N326T-6D
C228-200-74
C228-213-86
C228-246-86
C228-173-100
C228-213-120
C320-213-86
25hp to 30hp PKE-25-12-N324T-6D
PKE-30-12-N326T-6D
C320-256-100
C320-305-100
C320-213-120
C320-256-120
C320-256-144
C456-256-120
40 hp to 50hp PKE-40-12-N365T-6D
PKE-50-12-N404T-6D
C456-305-120
C456-365-120
C456-256-144
C456-305-168
C640-305-120
60hp to 75hp PKE-60-12-N405T-6D
PKE-75-12-N444T-6D
C640-256-144
C640-365-144
C640-305-168
C640-305-192
C912-427-216
75hp to 100hp PKE-75-12-N444T-6D
PKE-100-12-N444T-6D
C912-470-240
C912-427-192
C912-365-168
C912-427-144
Power King Electric LLC 11152 Westheimer Rd, #968 Houston, Texas, USA Email: [email protected] __________________________________________________________________________________________________________________________________
Model HP KW RPM @
60HZ Frame
Full Load
Amps
460V
Eff @ Full
Load
Volt
Code
“C” Ap’x.
Dimensio
n
Shipping
weight
Totally Enclosed Fan Cooled - 230/460/796 Twelve Lead and 460/796 Six Lead
PEK-12-3-213T-6D 3 2.2 1125 213T 5.2 79 V 19.32 155
PEK-12-5-215T-6D 5 3.7 1125 215T 7.6 80 V 19.32 175
PEK-12-7.5-254T-6D 7 1/2 5.6 1125 254T 12.5 84 V 23.25 300
PEK-12-10-256T-6D 10 7.5 1125 256T 15.5 84 V 23.25 340
PEK-12-15-284T-6D 15 11.2 1125 284T 20.7 85.5 V 27.56 410
PEK-12-20-286T-6D 20 14.9 1125 286T 25 87.5 V 27.56 440
PEK-12-25-324T-6D 25 18.7 1125 324T 33 87.5 V 30.27 580
PEK-12-30-326T-6D 30 22.4 1125 326T 39 87.5 V1 30.27 610
PEK-12-40-365T-6D 40 30 1125 365T 51 88.5 V1 32.84 650
PEK-12-50-404T-6D 50 37 1125 404T 60 87.5 V1 38.03 1035
PEK-12-60-405T-6D 60 45 1125 405T 73 88.5 V1 38.03 1200
PEK-12-75-444T-6D 75 56 1125 444T 88 88.5 V1 44.24 1378
PEK-12-100-445T-6D 100 75 1130 445T 116 90.2 V1 47.74 1798
PEK-12-125-447T-6D 125 93.2 1140 447T 150 91 V1 52.68 2265
PEK-12-150-447T-6D 150 112 1140 447T 178 91 V1 52.68 2612
Power King Electric LLC 11152 Westheimer Rd, #968 Houston, Texas, USA Email: [email protected] __________________________________________________________________________________________________________________________________
Power King Electric Inc Email: [email protected]
Tel: 1-282-305-8679
Copyright 2013, Power King Electric LLC. All rights reserved.