tibco activematrix adapter for database installation · tibco activematrix adapter for database...

Two-Second Adv

TIBCO ActiveMatrix® Adapter for Database

InstallationSoftware Release 7.2April 2016

antage®

Important Information

SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE.USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE “LICENSE” FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME.This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc.TIBCO, Two-Second Advantage, TIBCO ActiveMatrix Adapter for Database, TIBCO ActiveMatrix BusinessWorks, TIBCO Adapter SDK, TIBCO Administrator, TIBCO Business Studio, TIBCO Database Drivers Supplement, TIBCO Designer, TIBCO Enterprise Message Service, TIBCO Hawk, TIBCO ActiveSpaces, TIBCO Rendezvous, and TIBCO Runtime Agent are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/or other countries.Enterprise Java Beans (EJB), Java Platform Enterprise Edition (Java EE), Java 2 Platform Enterprise Edition (J2EE), and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle Corporation in the U.S. and other countries.All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only.THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM.THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME.THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.Copyright © 1999-2016 TIBCO Software Inc. All rights reserved.TIBCO Software Inc. Confidential Information

| iii

Contents

Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viiiTIBCO ActiveMatrix Adapter for Database Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viiiOther TIBCO Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii

Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Connecting with TIBCO Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xivHow to Join TIBCO Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xivHow to Access TIBCO Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xivHow to Contact TIBCO Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiv

Chapter 1 Installation Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

TIBCO ActiveMatrix Adapter for Database Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 2 Preinstallation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Overview of Preinstallation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Installer Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10System Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Supported Platforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Software Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 3 Installation and Uninstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Installing in GUI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Installing in Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Installing in Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Uninstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Uninstalling in GUI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

TIBCO ActiveMatrix Adapter for Database Installation

iv | Contents

Uninstalling in Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 4 Postinstallation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Postinstallation Tasks on Microsoft Windows Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Configuring the Database Account Used by the Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Configuring the Adapter in TIBCO Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Installing Additional TIBCO Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Setting TRA Properties for ActiveSpaces Connection (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Postinstallation Tasks on Linux Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Setting Directory Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Configuring the Adapter in TIBCO Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Installing Additional TIBCO Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Setting TRA Properties for ActiveSpaces Connection (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Appendix A Installed Files Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Installed Directories and Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35


Tables | v

Tables

Table 1 TIBCO Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Table 2 General Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Table 3 Syntax Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Table 4 TIBCO ActiveMatrix Adapter for Database Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table 5 Software Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Table 6 Installed Directories and Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32


vi | Tables


| vii

Preface

TIBCO ActiveMatrix® Adapter for Database is a bidirectional gateway between databases and applications configured for the TIBCO environment. The adapter supports publication, subscription, and request-response interactions.

This document describes how to install TIBCO ActiveMatrix Adapter for Database

Topics

• Related Documentation, page viii

• Typographical Conventions, page xi

• Connecting with TIBCO Resources, page xiv

This software might be available on multiple operating systems. However, not all operating system platforms for a specific software version are released at the same time. See the readme file for the availability of this software version on a specific operating system platform.


viii | Related Documentation

Related Documentation

This section lists documentation resources you might find useful.

TIBCO ActiveMatrix Adapter for Database DocumentationThe following documents form the TIBCO ActiveMatrix Adapter for Database documentation set:

• TIBCO ActiveMatrix Adapter for Database Concepts Read this manual for terminology and concepts of the product. The other manuals in the documentation set assume you are familiar with the information in this manual.

• TIBCO ActiveMatrix Adapter for Database Installation Read this manual for instructions on site preparation and installation.

• TIBCO ActiveMatrix Adapter for Database Configuration and Deployment Read this manual for instructions on how to create, configure, and deploy adapter projects.

• TIBCO ActiveMatrix Adapter for Database Examples Read this manual to work through the examples provided with the adapter.

• TIBCO ActiveMatrix Adapter for Database Release Notes Read the release notes for a list of new and changed features. This document also contains lists of known issues and closed issues for this release.

Other TIBCO Product DocumentationYou might find it useful to read the documentation for the following TIBCO products:

Table 1 TIBCO Products (Sheet 1 of 3)

TIBCO Product Description

TIBCO ActiveMatrix BusinessWorks™ This product provides an integration platform for companies to rapidly integrate systems and automate business processes.

TIBCO® Adapter SDK This product provides a class library for developers to implement an adapter with minimal effort.


Preface | ix

TIBCO Administrator™ This product is designed to manage users, monitor machines, and deploy applications that use TIBCO products.

TIBCO Business Studio™ This product is designed for business analysts who want to document business processes, solution engineers who want to implement business processes, and SOA developers who want to create composite applications.

TIBCO® Database Drivers Supplement This product provides the licensed DataDirect database JDBC drivers that can be used with TIBCO ActiveMatrix Adapter for Database.

TIBCO Designer™ This product provides a graphical user interface to create TIBCO ActiveMatrix BusinessWorks process definitions, or create or modify TIBCO Adapter configurations.

TIBCO Enterprise Message Service™ This product sends messages from your applications in a format that conforms to the Java Messaging Service (JMS) specification.

TIBCO Hawk® This product is designed to monitor and manage distributed applications and systems throughout the enterprise.

TIBCO Rendezvous® This product uses messages to enable distributed application programs to communicate across a wide variety of hardware platforms and programming languages.

TIBCO Runtime Agent™ This product is a bundle of TIBCO software and third-party software that is required to run many TIBCO applications, such as TIBCO ActiveMatrix BusinessWorks and TIBCO Adapters.




x | Related Documentation

TIBCO ActiveSpaces® This product is a peer-to-peer distributed in-memory data grid. TIBCO ActiveSpaces is a form of virtual shared memory that is replicated on distributed devices and applications.

Note: Support for the connection of TIBCO ActiveMatrix Adapter for Database to TIBCO ActiveSpaces is deprecated in this release.




Preface | xi

Typographical Conventions

The following typographical conventions are used in this manual.

Table 2 General Typographical Conventions

Convention Use

ENV_NAME

TIBCO_HOME

TIBCO products are installed into an installation environment. A product installed into an installation environment does not access components in other installation environments. Incompatible products and multiple instances of the same product must be installed into different installation environments.

An installation environment consists of the following properties:

• Name Identifies the installation environment. This name is referenced in documentation as ENV_NAME. The default value is TIBCO_HOME.

• Directory The folder into which the product is installed. This folder is referenced in documentation as TIBCO_HOME.

TIB_ADADB_HOME TIBCO ActiveMatrix Adapter for Database is installed into a directory within a TIBCO_HOME directory. This directory is referenced in documentation as TIB_ADADB_HOME. The default value of TIB_ADADB_HOME depends on the operating system. For example on Windows systems, the default value is C:\tibco\adapter\adadb\ReleaseNumber.

code font Code font identifies commands, code examples, filenames, pathnames, and output displayed in a command window. For example:

Use MyCommand to start the foo process.

bold code font Bold code font is used in the following ways:

• In procedures, to indicate what a user types. For example: Type admin.

• In large code samples, to indicate the parts of the sample that are of particular interest.

• In command syntax, to indicate the default parameter for a command. For example, if no parameter is specified, MyCommand is enabled: MyCommand [enable | disable]


xii | Typographical Conventions

italic font Italic font is used in the following ways:

• To indicate a document title. For example: See TIBCO ActiveMatrix Adapter for Database Concepts.

• To introduce new terms. For example: A portal page may contain several portlets. Portlets are mini-applications that run in a portal.

• To indicate a variable in a command or code syntax that you must replace. For example: MyCommand PathName

Key combinations Key name separated by a plus sign indicate keys pressed simultaneously. For example: Ctrl+C.

Key names separated by a comma and space indicate keys pressed one after the other. For example: Esc, Ctrl+Q.

The note icon indicates information that is of special interest or importance, for example, an additional action required only in certain circumstances.

The tip icon indicates an idea that could be useful, for example, a way to apply the information provided in the current section to achieve a specific result.

The warning icon indicates the potential for a damaging situation, for example, data loss or corruption if certain steps are taken or not taken.

Table 3 Syntax Typographical Conventions

Convention Use

[ ] An optional item in a command or code syntax.

For example:

MyCommand [optional_parameter] required_parameter

| A logical OR that separates multiple items of which only one may be chosen.

For example, you can select only one of the following parameters:

MyCommand param1 | param2 | param3

Table 2 General Typographical Conventions (Cont’d)

Convention Use


Preface | xiii

{ } A logical group of items in a command. Other syntax notations may appear within each logical group.

For example, the following command requires two parameters, which can be either the pair param1 and param2, or the pair param3 and param4.

MyCommand {param1 param2} | {param3 param4}

In the next example, the command requires two parameters. The first parameter can be either param1 or param2 and the second can be either param3 or param4:

MyCommand {param1 | param2} {param3 | param4}

In the next example, the command can accept either two or three parameters. The first parameter must be param1. You can optionally include param2 as the second parameter. And the last parameter is either param3 or param4.

MyCommand param1 [param2] {param3 | param4}

Table 3 Syntax Typographical Conventions (Cont’d)

Convention Use


xiv | Connecting with TIBCO Resources

Connecting with TIBCO Resources

How to Join TIBCO CommunityTIBCO Community is an online destination for TIBCO customers, partners, and resident experts. It is a place to share and access the collective experience of the TIBCO community. TIBCO Community offers forums, blogs, and access to a variety of resources. To register, go to https://community.tibco.com.

How to Access TIBCO DocumentationDocumentation for this and other TIBCO products is available on the TIBCO Documentation site:

https://docs.tibco.com

Documentation on the TIBCO Documentation site is updated more frequently than any documentation that might be included with the product. To ensure that you are accessing the latest available help topics, please visit us at https://docs.tibco.com.

How to Contact TIBCO SupportFor comments or problems with this manual or the software it addresses, contact TIBCO Support as follows:

• For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site:

http://www.tibco.com/services/support

• If you already have a valid maintenance or support contract, visit this site:

https://support.tibco.com

Entry to this site requires a user name and password. If you do not have a user name, you can request one.


http://www.tibco.com/services/support

https://support.tibco.com

https://community.tibco.com

https://docs.tibco.com/

https://docs.tibco.com

| 1

Chapter 1 Installation Introduction

This chapter discusses software components of the product, installation modes, installation environment, and installation logging.

Topics

• TIBCO ActiveMatrix Adapter for Database Components, page 2

• Installation Modes, page 3

• Installation Environment, page 4

• Installation Logging, page 5


2 | Chapter 1 Installation Introduction

TIBCO ActiveMatrix Adapter for Database Components

TIBCO ActiveMatrix Adapter for Database consists of the software components listed in Table 4.

You can select the components to install by either using the profiles predefined in TIBCO Universal Installer or explicitly selecting the components you want to install.

By default, TIBCO Universal Installer installs all the components with the Typical profile. Meanwhile, you can also customize the installation by explicitly selecting the components to install.

Table 4 TIBCO ActiveMatrix Adapter for Database Components

Component Description

Runtime This process does the actual work of passing and converting data to and from the vendor application.

Design time Adapter-specific GUI that is loaded in TIBCO Designer at configuration time. This component includes the palettes and samples that demonstrate how TIBCO ActiveMatrix Adapter for Database interacts with TIBCO ActiveMatrix BusinessWorks.

Documentation This component is required for context sensitive help.

The adapter installation package does not include JDBC drivers.


Installation Modes | 3

Installation Modes

You can run TIBCO Universal Installer in GUI, console, or silent mode. Each mode is supported on all platforms.

GUI Mode

In GUI mode, the installer displays panels where you can select a product, product location, and so on. To invoke the installer in GUI mode, double-click the executable file.

Console Mode

In console mode, you can run the installer on a command line. This is useful if your machine does not have a GUI environment.

Silent Mode

In silent mode, the installer installs the product without prompting you for information. The installer uses either default or custom settings that are saved in a response file.



Installation Environment

TIBCO products are installed into an installation environment. An installation environment isolates product installations. A product installed into one installation environment cannot access components in other installation environments. Incompatible products and multiple instances of the same product must be installed into different installation environments.

An installation environment is the top level installation directory for TIBCO products. An installation environment consists of the following properties:

• Name (ENV_NAME) Identifies the name of the folder where the product is installed.

In Microsoft Windows, the name is appended to the name of Windows services created by the installer. The name is a component of the path to the product shortcut in the Windows Start > All Programs menu. The default value is TIBCO_HOME.

• Directory (TIBCO_HOME) Identifies the directory into which the product is installed.

The installer installs any products to the default installation environment directly under the Windows Start > All Programs > TIBCO menu. For all other environments, the installer creates a shortcut under the Windows Start > All Programs > TIBCO > ENV_NAME menu.


Installation Logging | 5

Installation Logging

TIBCO Universal Installer writes logging information to the tibco_universal_installer.username_install.log file.

The installer log file is available in the following locations:

• On Microsoft Windows: C:\Users\username\.TIBCO\install_timestamp

• On Linux: user_home_dir/.TIBCO/install_timestamp

To change the location of the installer log file, specify the option -V logFile="myLogFile" when you run the installer.

The installer log file captures the following information:

• Installation environment details, such as the user that invoked the installer, the host name, the Java home in the environment, operating system details, and so on.

• List of assemblies installed.

• Information related to the Ant scripts that are executed by the installer.


| 7

Chapter 2 Preinstallation Tasks

This section explains tasks you must complete before installing TIBCO ActiveMatrix Adapter for Database.

Topics

• Overview of Preinstallation Tasks, page 8

• Installation Requirements, page 9


8 | Chapter 2 Preinstallation Tasks

Overview of Preinstallation Tasks

Before you start with installation, ensure that your system meets all prerequisites. You must also decide on the installation environment; download and extract the installation package.

1. Make sure your environment meets all requirements.

See Installation Requirements on page 9 for details.

2. Decide whether to install the product in an existing installation environment or a new one. If you plan installing in the existing installation environment, stop all processes from the directory of the existing environment.

See Installation Environment on page 4 for details regarding the installation environment and its properties.

3. Open the physical media or download the TIBCO ActiveMatrix Adapter for Database archive file and extract the archive file to a temporary directory.


Installation Requirements | 9

Installation Requirements

This section describes the following requirements for this product:

• Installer Account, page 9

• Disk Space, page 10

• System Memory, page 10

• Supported Platforms, page 10

• Software Requirement, page 10

Installer AccountBefore running the installer on Windows and Linux systems, you must log in as a user with appropriate permissions. The privileges vary depending on which platform you use.

Microsoft Windows

You must have administrator privileges for the machine on which this product is installed. If you do not have administrator privileges, the installer exits. You must then log out of the system and log in as a user with the required privileges, or request your system administrator assign the privileges to your account.

If you intend to install the product on a network drive, ensure that the account used for installation has permission to access the network drive.

UNIX

Any user can install this product:

• Normal user (non-root)

• Superuser (root)

While installing this product on UNIX platforms, ensure that the same installer account is used to install all TIBCO Adapter products.

A graphic environment such as CDE or X Windows is required to run the installer in GUI mode.



Disk SpaceThe required disk space depends on the platform you use and the software components you select to install. The installer calculates the required disk space in TIBCO_HOME for the selected components. The calculation is done before the actual installation, that is, before copying files to system begins. The installer proceeds only if sufficient free disk space is available. TIBCO ActiveMatrix Adapter for Database can consume up to 700 MB of free space under TIBCO_HOME.

System MemoryA minimum of 2 GB of physical memory is required.

Supported PlatformsSee the readme file for the supported platforms, versions, and required patches.

Software RequirementTable 5 lists the required and optional software products.

Table 5 Software Requirement (Sheet 1 of 4)

Software Description

TIBCO Software

The following software products are distributed and installed separately from this product.

See the readme file for the supported versions.

TIBCO Rendezvous Required. TIBCO Rendezvous is required if you use Rendezvous as the message transport for your adapter.

TIBCO Rendezvous is available as a separate installation, and you must install TIBCO Rendezvous before installing TIBCO Runtime Agent.



TIBCO Runtime Agent Required. TIBCO Runtime Agent is required on each machine that hosts an adapter.

TIBCO Runtime Agent includes TIBCO Designer along with a number of TIBCO and third-party libraries used by the adapter and other TIBCO products.

TIBCO Runtime Agent is available as a separate installation. You must install TIBCO Runtime Agent before you install TIBCO ActiveMatrix Adapter for Database.

TIBCO Database Drivers Supplement

Required. TIBCO Database Drivers Supplement provides the licensed DataDirect database JDBC drivers that can be used with TIBCO ActiveMatrix Adapter for Database.

TIBCO Database Drivers Supplement is available as a separate installation package, and you can install it after installing the adapter.

TIBCO Enterprise Message Service

Optional. TIBCO Enterprise Message Service is required only if you use JMS as the message transport for your adapter.

TIBCO Enterprise Message Service sends messages from your applications in a format that conforms to the JMS specification. TIBCO ActiveMatrix Adapter for Database is not necessarily installed on the machine on which TIBCO Enterprise Message Service is installed.

TIBCO Enterprise Message Service is available as a separate installation package, and you can install it after installing the adapter.

Note:

TIBCO Enterprise Message Service is also used by the TIBCO ActiveMatrix SOAP and JMS binding types. The TIBCO ActiveMatrix Adapter for Database license does not cover this usage of the included TIBCO Enterprise Message Service software. You must separately license TIBCO Enterprise Message Service or another supported JMS product for this usage.





TIBCO Administrator Optional. TIBCO Administrator includes the following modules:

• User Management The User Management module manages authentication, roles and users, that is, connecting roles (groups) and users to access control lists (ACLs). The User Management module includes security for server-based projects at design time and for deployed applications at run time.

• Resource Management The Resource Management module monitors machines and all running applications in a TIBCO administration domain. You can create alerts, for example, to notify an administrator if the number of processes or disk usage exceeds a certain limit.

• Application Management The Application Management module uploads Enterprise Archive (EAR) files and creates, configures, deploys, and monitors applications. This console is also used to start and stop applications.

TIBCO Administrator is available as a separate installation, and you can install it after installing the adapter.

TIBCO ActiveMatrix BusinessWorks

Optional. TIBCO ActiveMatrix BusinessWorks is required only if you integrate the adapter to the projects created using TIBCO ActiveMatrix BusinessWorks.

TIBCO ActiveMatrix BusinessWorks is a scalable, extensible, and easy-to-use integration platform for you to develop integration projects. TIBCO Adapters are typically part of integration projects created using TIBCO ActiveMatrix BusinessWorks.

TIBCO ActiveMatrix BusinessWorks is available as a separate installation, and you can install it after installing the adapter.





TIBCO Hawk Optional. TIBCO Hawk monitors and manages distributed applications and systems throughout the enterprise. System administrators can monitor application parameters, behaviors, and loading activities for all nodes in a local or wide-area network and table action when predefined conditions occur. In many cases, runtime failures or slowdowns can be repaired automatically within seconds of their discovery, reducing unscheduled outages and slowdowns of critical business systems.

TIBCO ActiveSpaces Optional. TIBCO ActiveSpaces is required if you want to publish messages to TIBCO ActiveSpaces instead of a database. TIBCO ActiveSpaces is a distributed peer-to-peer in-memory data grid, a form of virtual shared memory that leverages a distributed hash table with configurable replication.

TIBCO ActiveSpaces combines the features and performance of databases, caching systems, and messaging software to support large, highly volatile data sets and event-driven applications. With TIBCO ActiveSpaces, you can off-load transaction-heavy systems, and developers can concentrate on business logic rather than the complexities of developing distributed fault tolerance.

Note: Support for the connection of TIBCO ActiveMatrix Adapter for Database to TIBCO ActiveSpaces is deprecated in this release.




| 15

Chapter 3 Installation and Uninstallation

This chapter explains how to install and uninstall TIBCO ActiveMatrix Adapter for Database.

Topics

• Installation, page 16

• Uninstallation, page 21


16 | Chapter 3 Installation and Uninstallation

Installation

The following sections describe the installation process in the available installation modes:

• Installing in GUI Mode, page 16

• Installing in Console Mode, page 18

• Installing in Silent Mode, page 19

Installing in GUI ModeIn GUI mode, TIBCO Universal Installer presents a series of pages for you to define the installation environment, customize and complete the installation. Figure 1 illustrates the TIBCO Installation Home page of the installer as a sample. Each page is referenced by its title in the following procedure.

Figure 1 TIBCO Installation Home Dialog

To install TIBCO ActiveMatrix Adapter for Database in GUI mode:

1. Open the physical media or download the installation package from the TIBCO eDelivery site (https://edelivery.tibco.com).

TitlePage


https://edelivery.tibco.com

Installation | 17

To download the installation package, a user name and a password are required. If you do not have a user name or password, contact TIBCO Technical Support.

2. Extract the content of the installation package to a temporary directory.

3. Use the extracted installation package to start the installation in one of the following ways:

— On Microsoft Windows, double-click TIBCOUniversalInstaller.exe.

— On Linux, run TIBCOUniversalInstaller-platform_acronym.bin.

4. In the Welcome dialog, click Next.

5. In the License Agreement dialog, read through the license agreement and click I accept the terms of the license agreement. Click Next.

Or if you do not agree to the terms of the license agreement, click Cancel to exit the installation process.

6. In the TIBCO Installation Home dialog, specify the installation environment. See Figure 1.

— Create a new TIBCO_HOME To install the product into a new installation environment, specify the following properties:

Directory (TIBCO_HOME) The directory into which the product is installed. Type a path or click Browse to specify the path or accept the default location.

The path cannot contain special characters such as "*", "#", "?", ">", "<", "%", "&", "$", "`", or "|". The path cannot be the same as the path of an existing environment.

Name (ENV_NAME) Identifies the installation environment. The name cannot contain special characters such as "*", "?", ">", "<", ":", "|", "/", "\", or quotation marks(").

— Use an existing TIBCO_HOME To install the product into an existing installation environment, select the environment from the drop-down list.

See Installation Environment on page 4 for details about installation environment and its properties.

Click Next.

7. In the Installation Profile Selection dialog, select an installation profile to specify the installation components to be installed. Or select the Customize Installation check box to select the installation components. Click Next.



See TIBCO ActiveMatrix Adapter for Database Components on page 2 for the components that are available for the installation and the predefined profiles you can select.

Figure 2 Installation Profile Selection Dialog

8. In the Pre-Install Summary dialog, review the list of products selected for the installation. Click Install.

9. In the Post Install Summary dialog, review the list of the installation information. Click Finish to complete the installation process and exit the installer.

Installing in Console ModeIn console mode, the TIBCO Universal Installer is run from the command line.

To install this product in console mode:

1. Open the physical media or download the package from the TIBCO eDelivery site (https://edelivery.tibco.com).


2. Extract the content of the package to a temporary directory.



Installation | 19

3. On the command line, navigate to the temporary directory to which you extract the installation package.

4. Enter the appropriate command to start the installation. For example:

— Microsoft Windows TIBCOUniversalInstaller.cmd -console

— Linux ./TIBCOUniversalInstaller-platform_acronym.bin -console

5. Respond to the messages on the command line.

See Installing in GUI Mode on page 16 for information about the messages.

6. When the installation is completed, press Enter to exit the installer.

Installing in Silent ModeIn silent mode, you can run the installer without user input by pointing the installer to an existing response file, which contains installation parameters.

A default response file is included with the product. You can edit the response file with information about your environment before launching the silent installation. The name of the default response file is:TIBCOUniversalInstaller_adadb_version_number.silent

The best practice is to make a copy of the default response file, edit the copied file, and then use it for the installation.

If you invoke the TIBCO Universal Installer with only the -silent argument, the installer reads the input from the default response file.

If you make a copy of the default response file and rename it, you must provide the name of the response file when invoking the installer. This is done by passing the following arguments on the command line:-silent -V responseFile="filename.silent"

where filename is the name you gave the response file.

If errors occur during installation, they are listed in the installation log file located in the User_Home/.TIBCO directory.

To install TIBCO ActiveMatrix Adapter for Database in silent mode:

1. Open the physical media or download the package from the TIBCO eDelivery site (https://edelivery.tibco.com).


2. Extract the contents of the package to a temporary directory.




3. Navigate to the temporary directory to which you extract the installation package.

4. Make a copy of the default response file, open the copy with a text editor, and then update the parameters as required.

The response file contains comments that describe each of the parameters. You can save the file using any name.

5. Enter the following command to start the installation. For example, if you have copied the response file and saved it as MyResponseFile.silent:

— Microsoft Windows TIBCOUniversalInstaller.cmd -silent -V

responseFile="MyResponseFile.silent"

— Linux TIBCOUniversalInstaller-platform_acronym.bin -silent -V responseFile="MyResponseFile.silent"

If you copy the response file to a directory other than the temporary directory containing the installer, you have to provide the absolute path of the response file.


Uninstallation | 21

Uninstallation

The following sections describe the uninstallation process in the available installation modes:

• Uninstalling in GUI Mode, page 21

• Uninstalling in Console Mode, page 22

Uninstalling in GUI ModeUsing the TIBCO Universal Installer, you can uninstall all products in a particular TIBCO_HOME, or you can uninstall specific products that have been installed in a TIBCO_HOME.

To uninstall this product in GUI mode:

1. Shut down all running TIBCO applications.

2. Navigate to the TIBCO_HOME/tools/universal_installer directory.

3. Start the TIBCO Universal Installer:

— On Microsoft Windows, double-click TIBCOUniversalInstaller.exe.

— On Linux, run TIBCOUniversalInstaller-platform_acronym.bin.

4. In the TIBCOInstallationManager dialog, click Uninstall Products from a TIBCO Home Location.

5. In the TIBCO Home Location field, select the TIBCO_HOME in which the product is installed, and then click Next.

6. In the Welcome dialog, click Next.

7. In the Uninstallation Type dialog, select one of the following options, and then click Next.

— Custom Uninstall Removes the products that you select in step 8.

— Typical Uninstall Removes all the products in the TIBCO_HOME you selected. If you select this option, proceed to step 9.

8. Select the products to be uninstalled, and then click Next.

9. Review the products to be uninstalled, and then click Uninstall.

10. In the Post-Uninstall Summary dialog, click Finish to exit the uninstall wizard.

11. If you have uninstalled all the software in TIBCO_HOME, delete the folders in the installation environment and user home.



Uninstalling in Console ModeIn console mode, you can uninstall the product from the command line.

To uninstall this product in console mode:

1. Open a command line and navigate to the TIBCO_HOME/tools/universal_installer directory.

2. Enter the appropriate command to start the uninstallation. For example:

— Microsoft Windows: TIBCOUniversalInstaller.cmd -console

— Linux: ./TIBCOUniversalInstaller-platform_acronym.bin -console

3. Respond to the messages on the command line.

See Uninstalling in GUI Mode on page 21 for information about the messages.

4. When the uninstallation is completed, press Enter to exit the installer.


| 23

Chapter 4 Postinstallation Tasks

This section explains what tasks you must complete after installing TIBCO ActiveMatrix Adapter for Database.

Topics

• Postinstallation Tasks on Microsoft Windows Platforms, page 24

• Postinstallation Tasks on Linux Platforms, page 27


24 | Chapter 4 Postinstallation Tasks

Postinstallation Tasks on Microsoft Windows Platforms

Before running TIBCO ActiveMatrix Adapter for Database on Microsoft Windows platforms, you have to complete the following tasks:

• Configuring the Database Account Used by the Adapter, page 24

• Configuring the Adapter in TIBCO Designer, page 25

• Installing Additional TIBCO Software, page 25

• Setting TRA Properties for ActiveSpaces Connection (Optional), page 26

Configuring the Database Account Used by the AdapterSQL scripts are provided to set up the database account used by the adapter. The TIB_ADADB_HOME\config directory contains subdirectories for supported databases. Each subdirectory contains one or more scripts that are specific to that database vendor.

1. Open a command window and change directory to your database directory. For example, for Oracle:

cd TIB_ADADB_HOME\config\oracle

2. Change the create_user script by using a text editor to identify the account name and password for the database user who will run the adapter. If you use Oracle and decide to use the alerter, provide the account name to use. For example, for Oracle:

CREATE USER karlh IDENTIFIED BY adbuser;GRANT CONNECT, RESOURCE TO karlh IDENTIFIED BY adbuser;

Note the following conditions about the create_user script and the alerter function:

• The create_user script creates a database user account with the necessary privileges required for the adapter. While using an Oracle database, you can use the alerter only if you have the privileges to access the alerter package.

• When using the alerter function with Oracle database, ensure that you have executed the create_user.sql and alerter.sql files with the database account used by the adapter.

• When using the alerter function with Microsoft SQL Server database, ensure that you have executed the create_user70.sql and alerter_ms.sql files with the database account used by the adapter and enabled the service broker function on the database server.


Postinstallation Tasks on Microsoft Windows Platforms | 25

-- For Alerter use onlyGRANT EXECUTE on DBMS_AQ to karlh;GRANT EXECUTE on DBMS_AQADM to karlh;

This account is used to connect to the database and access tables created when configuring an adapter. Note that a publication source table or subscription destination table can belong to a different schema than the default one specified in the create_user script. For more information, see TIBCO ActiveMatrix Adapter for Database Configuration and Deployment.

3. Execute the create_user script as the database administrator. For example, for Oracle:

sqlplus dba_user_id/dba_password@service @create_user.sql

4. If you use Oracle and decide to use the alerter, you must also execute the alerter.sql script. This script sets up the tables used by the alerter. Use the database user account created in step 2. For example:

sqlplus dba_user_id/dba_password@service @alerter.sql

Configuring the Adapter in TIBCO Designer

When configuring the adapter instance in TIBCO Designer, you must add the JDBC driver file to the adapter installation library directory: TIB_ADADB_HOME\lib

For example:

For Teradata database:TIB_ADADB_HOME\lib\tdgssconfig.jarTIB_ADADB_HOME\lib\terajdbc4.jar

For PostgreSQL database:TIB_ADADB_HOME\lib\postgresql-9.0-801.jdbc3.jarTIB_ADADB_HOME\lib\postgresql-9.0-801.jdbc4.jar

Installing Additional TIBCO SoftwareIf you want to use any of the following TIBCO products, you must install them first. These products are not provided with TIBCO ActiveMatrix Adapter for Database.

• TIBCO Administrator

• TIBCO ActiveMatrix BusinessWorks

This step applies to PostgreSQL and Teradata databases.



• TIBCO Enterprise Message Service

• TIBCO Hawk

• TIBCO ActiveSpaces

Setting TRA Properties for ActiveSpaces Connection (Optional)If you want to connect the adapter to TIBCO ActiveSpaces and test the connection, add the following properties to the adbagent.tra and designer.tra files:%AS_HOME%/lib to tibco.env.CUSTOM_CP_EXT

%AS_HOME%/lib to tibco.env.CUSTOM_PATH

If you have installed TIBCO Runtime Agent 5.9.0 or higher, note the following conditions:

• If TIBCO Enterprise Message Service (EMS) is installed after TIBCO ActiveMatrix Adapter for Database 7.2, you must manually add the TIBCO_HOME\ems\ems_version\lib EMS LIB path to the tibco.env.CUSTOM_CP_EXT property in the adbagent.tra and designer.tra files.

• If TIBCO EMS is installed before TIBCO ActiveMatrix Adapter for Database 7.2, the TIBCO_HOME\ems\ems_version\lib EMS LIB path is automatically added in the adbagent.tra file. However, you still have to add the EMS LIB path to the tibco.env.CUSTOM_CP_EXT property in the designer.tra file.

• If you do not want to manually add the EMS LIB path, you can use the traUpgradeManager.exe tool in the TIBCO_HOME\tra\tra_version\bin directory to set the EMS LIB path in the TRA files.

On Windows platform, run the following commands:— traUpgradeManager.exe -path TIB_ADADB_HOME\bin\adbagent.tra

-ems TIBCO_HOME\ems\ems_version

— traUpgradeManager.exe -path TIBCO_HOME\designer\tra_version\bin\designer.tra -ems TIBCO_HOME\ems\ems_version

Support for the connection of TIBCO ActiveMatrix Adapter for Database to TIBCO ActiveSpaces is deprecated in this release.


Postinstallation Tasks on Linux Platforms | 27

Postinstallation Tasks on Linux Platforms

Before running TIBCO ActiveMatrix Adapter for Database on a Linux platform, you have to complete the following tasks:

• Setting Directory Permissions, page 27

• Configuring the Adapter in TIBCO Designer, page 27

• Installing Additional TIBCO Software, page 28

• Setting TRA Properties for ActiveSpaces Connection (Optional), page 29

Setting Directory PermissionsDepending on whether a repository server is used and whether TIBCO Administrator is used to set access permissions, you might require a TIBCO Administrator account. See your TIBCO Administrator guide for details.

Ensure that all adapter users have read, write, and execute permissions for the following directories where the adapter files and configuration information are stored:

TIB_ADADB_HOME/bin TIB_ADADB_HOME/logsTIB_ADADB_HOME/sqlTIBCO_HOME/tra/TRA_version/logs

For example, if you install the adapter in /opt/tibco, you can make these directories writable for all other users by executing the following commands:

% chmod a+w /opt/tibco/adapter/adadb/version/bin% chmod a+w /opt/tibco/adapter/adadb/version/logs% chmod a+w /opt/tibco/adapter/adadb/version/sql% chmod a+w /opt/tibco/tra/TRA_version/logs

Configuring the Adapter in TIBCO Designer

When configuring the adapter instance in TIBCO Designer, you must add the JDBC driver file to the adapter installation library directory: TIB_ADADB_HOME/lib

For example:

For Teradata database:

This step applies to PostgreSQL and Teradata databases.



TIB_ADADB_HOME/lib/tdgssconfig.jarTIB_ADADB_HOME/lib/terajdbc4.jar

For PostgreSQL database:TIB_ADADB_HOME/lib/postgresql-9.0-801.jdbc3.jarTIB_ADADB_HOME/lib/postgresql-9.0-801.jdbc4.jar

Installing Additional TIBCO SoftwareIf you want to use any of the following TIBCO products, you must install them first. These products are not provided with TIBCO ActiveMatrix Adapter for Database.

• TIBCO Administrator

• TIBCO ActiveMatrix BusinessWorks

• TIBCO Enterprise Message Service

• TIBCO Hawk

• TIBCO ActiveSpaces

If you have installed TIBCO Runtime Agent 5.9.0 or higher, note the following conditions:

• If TIBCO EMS is installed after TIBCO ActiveMatrix Adapter for Database 7.2, you must manually add the TIBCO_HOME/ems/ems_version/lib EMS LIB path to the tibco.env.CUSTOM_CP_EXT property in the adbagent.tra and designer.tra files.

• If TIBCO EMS is installed before TIBCO ActiveMatrix Adapter for Database 7.2, the TIBCO_HOME/ems/ems_version/lib EMS LIB path is automatically added in the adbagent.tra file. However, you still have to add the EMS LIB path to the tibco.env.CUSTOM_CP_EXT property in the designer.tra file.

• If you do not want to manually add the EMS LIB path, you can use the traUpgradeManager.exe tool in the TIBCO_HOME\tra\tra_version\bin directory to set the EMS LIB path in the TRA files.

On Linux or Unix platform, run the following commands:— ./traUpgradeManager -path TIB_ADADB_HOME/bin/adbagent.tra

-ems TIBCO_HOME/ems/ems_version

— ./traUpgradeManager –path TIBCO_HOME/designer/tra_version/bin/designer.tra -ems TIBCO_HOME /ems/ems_version


Postinstallation Tasks on Linux Platforms | 29

Setting TRA Properties for ActiveSpaces Connection (Optional)If you want to connect the adapter to TIBCO ActiveSpaces and test the connection, add the following properties to the adbagent.tra and designer.tra files:%AS_HOME%/lib to tibco.env.CUSTOM_CP_EXT

%AS_HOME%/lib to tibco.env.CUSTOM_LIB_PATH

Support for the connection of TIBCO ActiveMatrix Adapter for Database to TIBCO ActiveSpaces is deprecated in this release.


| 31

Appendix A Installed Files Reference

This appendix lists the directories and files under TIB_ADADB_HOME after the adapter installation.

Topics

• Installed Directories and Files, page 32


32 | Appendix A Installed Files Reference

Installed Directories and Files

Table 6 lists the directories and files under TIB_ADADB_HOME after the adapter installation.

Table 6 Installed Directories and Files

Directory Description

bin Wrappers and sample TRA properties files for configuration of services.

config Configuration scripts and SQL statements for the adapter alerter function.

demo Examples provided with the adapter. This directory consists of two subdirectories:

• BusinessWorks 5 examples The bw5 folder contains examples that are created in TIBCO Designer.

• BusinessWorks 6 examples The bw6 folder contains examples that are created in TIBCO Business Studio.

ledger Ledger files that temporarily store published messages that are sent by a publisher adapter by using the TIBCO Rendezvous certified messaging quality of service.

doc Documentation of the adapter. Two formats are available in two subdirectories:

• html: HTML help.

• pdf: PDF help.

lib The adapter library files.

logs Log files used by the adapter.

setup post-install.xml

sql Stores all SQL statements created during the configuration of the adapter.

tools This folder is newly added in this release, which contains migration tool and dependent files that help move data between software programs, such as transferring adapter projects from older to newer versions.

Currently the migration tool can only migrate old projects in TIBCO ActiveMatrix Adapter for Database 6.x.


Installed Directories and Files | 33

If this is the first adapter installed under TIBCO_HOME, TIBCO Adapter SDK is also installed to the TIBCO_HOME\adapter\sdk directory.


34 | Appendix A Installed Files Reference


| 35

Index

C

console mode 3, 18, 22

D

disk space requirements 10

E

ENV_NAME xi, 4, 17

G

GUI mode 3, 16, 21

I

installation environmentdirectory 4, 17name 4, 17

installation logging 5installation modes

console 3, 18GUI 3, 16silent 3, 19

installation profilestypical 2

installation requirementsdisk space 10installer accounts

Microsoft Windows 9UNIX 9

software 10supported platforms 10system memory 10

installeddirectories 32files 32

P

pre-installation procedure 8product components 2

R

related documentation viii

S

silent mode 3, 19software requirements 10system memory requirements 10

T

TIB_ADADB_HOME xiTIBCO support

contacting xivTIBCO documentation xivTIBCOmmunity xiv


36 | Index

TIBCO_HOME xi, 4, 17typographical conventions xi

U

uninstallation modesconsole 22GUI 21

uninstallation procedure 21


tibco activematrix adapter for database installation · tibco activematrix adapter for database...

Documents